CD/dvd drive not found / disconnected... msg set

Hi all unable to use cd / dvd writer draw usually open... so cannot run cd help please...

Hello

The drive is just stuck?

For the readers of the status bar:

Sometimes they get stuck. There is a small hole on the front of the CD drive that you can stick a paper clip that will release him and the reader to open.

Create a trombone in car Opener
http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm

Open a CD/DVD player with a paper clip.
http://www.josepino.com/?open_cd-dvd_paperclip

=================================

For the readers of the slot:

Check with the manufacturer of system on how do to eject the disc.

Dell xps m1330 dvd drive will not eject cd inside<-- check="" these="">
http://www.FixYa.com/support/t2643828-dell_xps_m1330_dvd_drive_will_not_eject

Be careful as you may damage the player using the method below:

You may need to get the driver to work 1 However, this could still work.
http://www.tech-tweak.NET/2009/11/how-to-eject-STUK-DVD-from-slot-load.html

The method used on the Mac could work
http://www.YouTube.com/watch?v=wpWieIoBBrk

How to disassemble the laptop (Dell XPS M1330)<--- voids="" any="" warranty!="" this="" is="" an="">
http://ahwee.com/how-to-disassemble-laptop-Dell-XPS-M1330

Also have heard double tape on a credit card or play can work.

========================================================

If necessary:

Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.

Try this double click Control Panel - Device Manager - CD/DVD - device - tab - click on update drivers (this will probably do nothing) - then RIGHT click the drive of the driver - UNINSTALL - REBOOT this will refresh the default driver stack. Even if the reader does not appear to continue
below.

Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.

Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit

Try this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

Your CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116

The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461

When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052

Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems

CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/

Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems

Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables at both ends. Remove and replace, do not just tight. For laptops, you can often clean power and contacts data with a pencil eraser.

Some DVD players do not use the Windows default drivers so check with the system manufacturer and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.

===============================

Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

Did you follow the Troubleshooting Guide for the reader who still does not work? There are some entries in the registry that the troubleshooter does not solve, and those who "could" be the cause.

Check with your system manufacturer Maker and device for possible firmware updates and the correct registry entries for your car.

These are the keys in my opinion, are those in question - secondary-keys for the CD/DVD drive of course because there will be other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

-----------------------------------------------------------------------

You can probably find more information here and maybe even registry settings correct for your CD/DVD from someone with the same drive model.

Forums - a lot of expert real help
http://Club.myce.com/

CD/DVD units
http://www.myce.com/storage/

Use DevManView to locate the CD/DVD in the registry (be careful and do a Restore Point before changing anything)-find the DevManView device and then right click it open in RegEdit.

DevManView - free - an alternative to the standard Windows Device Manager, which displays all devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.html

I hope this helps.
--------------------------------------------------------------------------------------------
Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">

Tags: Windows

Similar Questions

  • CD/DVD drive not found in Windows 7

    I have a laptop Dell Inspiron 1545.  I did a clean install of Windows 7 (x 32 Edition) and since my drive CD/DVD is not found except in the BIOS and when I manually eject the drive it will pop up for a few seconds.  It's a TSST corp DVD +-RW T5 - L633B ATA Device.  Dell has released a driver for the problem, but as my computer can not find the drive it will not download the driver.  It will only appear in a few seconds Device Manager when I eject it, but then it disappears again and will not reappear unless I have the eject again.  When I put a disk it then the drive will show up but that's it.

    I tried deleting the upper and lower registry and I also tried the suggestion of integrity checks off without success.

    For any question on Windows 7:

    http://social.answers.Microsoft.com/forums/en-us/category/Windows7

    Link above is Windows 7 Forum for questions on Windows 7.

    Windows 7 questions should be directed to the it.

    You are in the Vista Forums.

    See you soon.

    Mick Murphy - Microsoft partner

  • DVD drive not found

    My PC (Pavillion P6022SC originally Windows Vista OS) suddenly frozen. I closed, restarted and had to restore the system - but it also failed - when she has been reset, it was impossible to find the operating system.

    I upgradet to Windows 7, a year ago and the HP recovery system has also been upgradet. I tried this once recovery before without problem

    I could see in the BIOS setting and who starts any drives hard and no DVD player has been detected. Both types are connected by SATA cables.

    I bought a new hard drive, still nothing happened and then I bought a HP recovery kit.

    But my DVD is not recognized (1st boot device), and none of the hard drives are recognized. I have an external DVD drive and try this - it is recognized, but the system tells me that none of the hard drives are available, so it is impossible to recover the system.

    Can I have a problem with the SATA connections? Or is it aBios or something else.

    I am an amateur, so if you are able to respond in a language for Dummies, it would be nice

    Hello:

    Your model has the M2N78-(purple), which is infamous for the default speed variators.

    This is probably what happened in your case.

    There are many positions related to this topic.

    I have listed a few below.

    http://h30434.www3.HP.com/T5/desktop-hardware/is-the-M2N78-la-motherboard-prone-to-failure/m-p/1056141/highlight/true#M40317

    http://h30434.www3.HP.com/T5/desktop-hardware/m8530f-desktop-PC-with-a-M2N78-la-mother-board-doesn-t-see/TD-p/181716

    I would just buy a new or refurbished nine PC rather than fixing that one (which would require a motherboard replacement).

  • CD/DVD DRIVE NOT FOUND on alienware 14

    He used to work, I don't know why, but it's no more! It is not yet "swallow" any cd/dvd, let alone read...

    I tried using microsoft fix and tried to fix it manually but nothing is detected. I feel like I need to reinstall software but I do not know who and where!

    Hi Winniepillow,

    What operating system? If you start at the F12 menu go to diagnostics, your DVD drive appear there? If it is not the case, the drive may have failed.

  • CD/dvd driver not found when installing Windows 7 on Asus f501A

    I am trying to install windows 7 on this laptop. Windows 8 are installed, but the drivers for the hardware that I need to use are not supported. I connect to cd/dvd-rom to boot from usb. I can install windows now the next screen ask a driver for the cd/dvd driver.

    I suggest, if you want to run Windows 7 on your system, you must do it through a virtual machine:

    You can use alternatives such as Oracle VirtualBox or VMWare Player.

    https://www.VirtualBox.org/wiki/downloads

    VMware Player;

    http://downloads.VMware.com/d/details/player_401/dGpkYnRwd3didGRwQA==

    or

    You will first need to go to the website of manufacturers for your model computer and first find out if there are native drivers in Windows 7. A large number of computers that are preloaded with Windows 8 have no native driver support for Windows 7 by the manufacturer. If there is no native driver, you will need to consider returning the machine and buying a machine preloaded with Windows 8 Pro with downgrade rights to Windows 7 Professional. Or look through the catalogue of manufacturers for systems already preloaded with Windows 7, usually the business sector will have these options.

  • CD/DVD drive not found

    My Pavilion dv5 concludes is no longer the CD/DVD drive in my computer. Device Manager shows it and notes, all right. However, everything I put in the player turns then stops without showing anything on the screen. I have checked everything I know, uninstalled, reinstalled, updated the bios. Any help out there?

    Problem solved. I opened the Control Panel, administrative tools, computer management, disk management, click with the right button on the reader without a name and gave the explicitive a drive letter. Seems to work now. Thanks for your help, I appreciate it. Any ideas on how it happened would be appreciated.

  • get the error "no sequence valid is not found for the set of patches" msg trying to launch Acrobat XI for the first time after installing - suggestions?

    get the error "no sequence valid is not found for the set of patches" msg trying to launch Acrobat XI for the first time after installing - suggestions?  Using Windows XP.

    Hi James,

    Let me know if the problem persists.

    Kind regards

    Nicos

  • Pavilion Slimline s5-1020: DVD drive not recognized in Device Manager

    My rarely used DVD player no longer works. Here are the things I have seen/made:
    -J' updated to Windows 10. It may or may not have stopped working before the update.
    -I update Windows automatically, and everything seems to be in order there.
    -The DVD seems to be operational, insofar as you can hear it turn when a disc is inserted.
    -Setup recognizes, and it is enabled; It is not at all in Device Manager or in the file Explorer.
    Based on the things I've tried, there are indications that it may be either a hardware or a software problem (or both?):

    SOFTWARE PROBLEM?
    I followed these as much as possible:
    http://support.HP.com/us-en/document/c03370738#c03370738_NoDriveWin8
    http://support.HP.com/us-en/document/c03370738#c01895589_resetpower
    http://h30434.www3.HP.com/T5/desktop-CD-DVD-read-only/read-this-for-CD-DVD-drive-with-burning-Missin...

    -I got disconnected/reconnected the drive.
    -J' tried various DVD I knew to do.
    -I don't have to update the BIOS, given warnings.
    - Nor did I mess with registry filters.
    -J' tried to find a Microsoft Fixit solution, but the one referenced somewhere in these pages don't apply to this OS - I think it was for Win 7.  I tried MS Control Panel convenience stores, but none of them worked.
    So I can't say whether or not it is a software problem.

    HARDWARE PROBLEM?
    -J' have set the boot on the CD order in configuration and the desktop with Windows 7 HP Pavilion system repair disc - nothing happened, he went straight to the HD (even if I had turned off).  So that leads me to believe it may be a hardware problem after all.

    Do I have other options at this point, except maybe buy another drive?  And in fact if I do, it is possible that one does not work either?

    While you are not alone in this problem, here's a thread that deals with her.

    http://h30434.www3.HP.com/T5/desktop-operating-systems-and-recovery/CD-DVD-drive-not-detected-after-upgrade-to-Windows-10/TD-p/5172346

    See if that helps

  • Hard drive not found error

    Hey everybody,

    My HP Pavilion G6 - 1164sa is coming up with an error "Hard drive not found" at the start up. It also makes a clicking sound. have you tried another hard drive to an old laptop in its place and the works, but because it is not the correct drivers installed for this model most things do not work. Need a solution to this? can I order a new hard drive for hp with all the drivers installed?

    Your drivers are posted on your support page > HERE

    You can order a hard drive at HP, but it will be a hard drive Virgin, as well as a new hdd retail except at much higher prices. I would like to replace the hard drive with a > hdd retail.

    If you plan to use recovery disks to reinstall Windows & software/drivers have one that is at least as large a capacity than the original, may be larger, but not smaller. If you have not written a set of recovery discs, you can usually order from HP for a small fee.

    If you can read the Windows 25-character license key attached to the bottom of the laptop there is possibility to download an ISO file, burn it to DVD and install Windows. Then you need to download your drivers on the support site. (Any size hard disk could be used with this option)

  • Error retrieving Tecra A6 (hard drive not found. Error: F3E1000001)

    Hello
    I want to recovery my Tecra A6, but when I insert the first (of three) DVD and restart my system to get to the recovery

    Menu (when booting from the recovery DVD) just rebooted my laptop and every time I try this (very simple procedure) this

    happen again.
    That's why I tried to get it back to Win XP > Toshiba Recovery Wizard... in the first DVD in the 'BIN' folder there isn't

    a "RECOVERY.bat" batch file when I run this file will open a CMD window and checks are willing (and then the

    following text is displayed in the CMD window :)
    "
    Verification of DMI
    Verification of RAID
    Failed to initialize the raid class.
    Check the HARD disk
    End of the error
    "
    and a new window opens with the following text:
    "

    an error has occurred.
    Error: F3E1000001
    Hard drive not found.
    Please press [OK] to turn the computer off.
    "
    If I press OK the any immediately goes down (without shut down windows) and I have to restart.
    Also my laptop works properly my recovery DVDs sounds great, I want to just recover my system because of the speed more

    in Win XP.
    Maybe there is a new firmware for my HARD drive or an update of the BIOS so that the laptop could detect my HDD.
    In Device Manager, my HARD drive is: HTS541010G9SA00

    Wait a minute: you try to run recovery as OS installation?

    The recovery procedure must be on path:
    Turn on the laptop and press the F12 key
    When the bootable devices appear put the first media for recovery in the optical disc drive
    Choose CD/DVD media from the list and press ENTER
    Follow the menu on the screen.

  • DVD burner not found.

    I got this error message when I tried to burn a DVD: A DVD burner not found.  Make sure a DVD burner is connected and installed and then try again.  How can I get my CD/DVD drive Matshita DVD-RAM UJ890AS enabled on my computer?

    What cuased changes this problem? first follow this article

    http://support.Microsoft.com/kb/314060

    If this does not try to restore your computer.

    I should say that you cannot restore your computer at the same time that you bought

    But you can restore at the time wherever your DVD-ROM was working normal.

    Click on "Start" Type System Restore and press enter and then select a different restore point and select the dates of your DVD-ROM was working normal and click Next.

  • Error when you try to burn a CD or DVD: burner not found

    Burner not found

    HP Pavilion Vista Edition Home Premium, version 6. All of a sudden, I can't burn cd/dvd. It says drive not found. Everything is linked, so I have NO idea what is wrong or what happened. Any 'simple', laymens in terms of help would be appreciated. (this will not work with Roxio either... same answer, burner not found)

    HP Pavilion Vista Edition Home Premium, version 6. All of a sudden, I can't burn cd/dvd. It says drive not found. Everything is linked, so I have NO idea what is wrong or what happened. Any 'simple', laymens in terms of help would be appreciated. (this will not work with Roxio either... same answer, burner not found)

    ===================================
    The following links may be worth a visit:

    (982116) your CD or DVD drive is missing
    or is not recognized by Windows or other programs
    http://support.Microsoft.com/kb/982116
    (Windows XP / Windows Vista / Windows 7)

    Your CD or DVD drive cannot read or write media
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    It is possible that the reader has need for service or replacement.

    Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • Bluetooth peripheral device driver not found.

    I have a laptop of Lenovo G 570 with professional Windows installed series. I am trying to pair my Bluetooth headset with my laptop, but I can't do it. It says on the troubleshooting, the Bluetooth peripheral device driver not found. Kindly help!

    Hello

    Check with Lenovo support, their drivers and documentation online and ask in their forum
    on known problems. Also check with the manufacturer of the helmet.

    Support from Lenovo and downloads
    http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.do

    Lenovo forums
    http://forums.Lenovo.com/

    =========================================

    Hardware devices not detected or does not work - a Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Add a BlueTooth device to your computer
    http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

    Set up a Bluetooth compatible device
    http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

    The problems with Bluetooth devices
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

    How to set up a Bluetooth connection
    http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

    The Bluetooth item in Control Panel on a Windows Vista SP2 computer does not
    as expected when you click on the element - for Windows 7 this check manually
    http://support.Microsoft.com/kb/960531/en-us

    If you need drivers try the support site for the manufacturer of your system and/or the site of the manufacturer of the real device.

    BluetoothView is a small utility that runs in the background and monitor the activity of Bluetooth technology
    devices around you. For each detected Bluetooth device, it displays the following information:
    The device name, address Bluetooth, Major Device Type, minor device Type, first detection time,
    Last detection time and more. BluetoothView can also warn when a new Bluetooth device
    is detected, by displaying a balloon in your bar tasks or playing a little beep. -FREE
    http://www.NirSoft.NET/utils/bluetooth_viewer.html

    BluetoothCL is a small console application that transforms all differential of bluetooth devices detected in
    the standard output. For each Bluetooth device, the following information is displayed: MAC
    Address, name, Major Device Type, minor device Type and possibly the name of the company of
    the device (if the external file of MAC addresses - oui.txt is provided) - FREE
    http://www.NirSoft.NET/utils/bluetoothcl.html

    BluetoothLogView is a small utility that monitors the activity of Bluetooth devices around you,
    and shows a log of Bluetooth devices in the main window. Each time that a new Bluetooth
    device coming to your area and when the unit comes out of your area, a new journal line is added with
    the following information: device name, time of the event, address, Type of event ("peripheral
    Arrival' or 'Device left'), Type of aircraft and the company that created the device. BluetoothLog-
    View you can also specify a description for each device (according to its MAC address)
    that appears in the column "Description". -FREE
    http://www.NirSoft.NET/utils/bluetooth_log_view.html

    ---------------------------------------------------------------------

    Change settings for a Bluetooth compatible device
    http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device

    Add a Bluetooth device to your computer
    http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

    Add a Bluetooth device or other wireless or network device: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

    ---------------------------------------------------------------------

    More information of possible interest to some:

    What is a Bluetooth personal area network (PAN) network?
    http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-a-Bluetooth-personal-area-network-Pan

    Connect to a Bluetooth personal area network (PAN) network
    http://Windows.Microsoft.com/en-us/Windows-Vista/connect-to-a-Bluetooth-personal-area-network-Pan

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Bluetooth device driver not found after accidental uninstall (Win7 64 bit)

    I use a Plantronics M50 bluetooth headset on my mobile, Skype etc. All troubleshooting yesterday (had a problem with the microphone volume is very low) I followed a few steps of an article if found on a Microsoft forum, telling me to uninstall the driver, as well as to restart my laptop (Win7 64 bit) would recognize and re - install the driver.

    In Device Manager, I right-click on the M50 (under audio, video and game controllers) device and chose to uninstall (as prescribed in the MS article). Here's where I shot myself in the foot; I ticked the box "Delete the driver for this device" (thinking that Win7 would get a fresh driver from Windows Update to reboot)

    After the reboot, my laptop started to reinstal the driver device, but for "Bluetooth device" reports "no driver not found"

    I myself tried in vain things:

    • tried to find the driver sur.com, but isn't available (plug-and-play)
    • installed software (incl. Plantronics Control Panel) Plantronics package
    • I tried Windows Update
    • installed Microsoft Windows Mobile Device Center 6.1 Driver (as advised on various sites to set "Bluetooth Peripheral Device" reports questions 'no driver found'

    At the hope that someone had a suggestion for what else to try, or maybe how to find out what that exactly that I deleted by choosing 'delete the driver for this device '.

    Thanks in advance!

    Edit:

    Just in case it helps, I noticed that the following folder is created at the time of uninstal and reinstal, containing calisto.inf, calisto. PNF and Calisto.cat

    C:\Windows\System32\DriverStore\FileRepository\calisto.inf_amd64_neutral_2b13d4544d6cf2e6

    I decided to use Sytem Restore to restore my system to before I uninstalled the driver. There are a few downsides to this, but so far the benefits outweigh them.

  • Help format/reinstall, HARD drive not found

    Dell Dimension 8400 my brother got a horse of Trojan/bot out there and I had to do a thorough cleaning due to not being able to locate the infection and the internet company kept cutting off the Internet.

    I first tried the start of the disc and using disk relocation provided by Dell. He said "this part of the Setup program prepares Microsoft Windows XP on your computer. To set up Windows XP now, press ENTER. To repair a Win XP... Press R."

    I chose the first option and get the message: "Setup has not found hard disk units installed on your computer." And the only option (F3) is to stop smoking.

    I made a diagnosis of HD and it passes. Looking in the BIOS, it is recognised as disk 0 and also in the startup list.

    I decided that maybe there was a lock on there so I used DBAN to run a DoD wipe/format and clean the drive. So now it has to be completely formatted. I also jumped into a boot disk and performed a fdisk, but he doesn't recognize and create a partition of 8 GB to 160 GB. Hmmm, something's not right.

    Again, I'm trying to reinstall with reinstall drive and a full copy of XP that I have and you still get the "hard drive not found" error.

    The FAQ does not seem to cover this issue, but I could easily looking in the wrong places. in any case, I want to just wipe the drive and reinstall. Any suggestions?

    Message edited by Deboad on 10/25/2008 17:36

Maybe you are looking for

  • View IE module does not properly

    I have the IE see the module installed (version 1.5.6) to still open and run Microsoft Updates in Internet Explorer. It works in that, when I select Microsoft Update of my favorites, a window opens.BUT that window then tells me that I need to run Int

  • Office Jet 7612: Scan of the computer does not work after you win 10 improvement

    One of my clients has an officejet 7612 and has improved to win 10 to win 8 and lost the "Scan to PC" features themselves the printer he used for years to create his PDF files. Print and scan drivers seem to work to scan and print from the computer t

  • Structures containing the array of unspecified size...

    Never seen it in any C compiler, I had the following code: #define NAICHAN 7 #define NAOCHAN 4 #define NPID NAOCHAN typedef struct _AppData AppData; typedef struct _PidData PidData; typedef struct _AiChData AiChData; typedef struct _AoChData AoChData

  • AIO 922 printer connection problems. Does not print

    My AIO 922 printer won't print from my compuuter. I checked to see if it is a driver problem and the drivers are all installed and the firewall is ok not blocking, that's their a cleaner utility that may be used to solve this problem. It happened whe

  • How to save the map features of polyline to a SQL database?

    I have an application with a plan and I'm looking to add the polyline feature, but I'm a little confused as to how I would add all geographical points in my database?  They all get stuck and added in a column?  Or do I have to continue to add columns