Screen of the blackBerry Smartphone will not turn off

Similar Questions

• Screen of blackBerry Smartphones will not turn off and kills battery

  When I had first the curve 8330 screen turns off after a while and kept my batterylife. Now, the screen never stops and I change not any opportunity to do that and its killing my battery. How to fix this?

  Well I just went back to make sure that all my applications have been closed and one was not and the screen has not come back. Thanks for help... im so new to this phone! haha

• Screen of the blackBerry Smartphone will not portrait in landscape mode when, in the pages of sms and message mode change

  I don't know if I've accidentally changed something, but all of a sudden I can not get the screen to switch from portrait to landscape mode when im in the pages of sms and message. I searched everywhere for an option that could keep me out of this point of view, but I have not found anything. Anyone know how to fix this? your help will be greatly appreciated.

  Make sure that you use the latest version of the OS that you can find (from any carrier.)

  You can probably get it to work again by removing the battery and reinsert.

• BlackBerry smartphone wifi not turn off on 9810

  I just bought a torch 9810 today. Wi - fi does not turn off even after unchecking the box. It comes on automatically even after I unchecked the box. Help?

  Try a battery pull if you please, with the BlackBerry device powered on, remove the battery 15 seconds and then reinsert the battery to reboot the device. This will clear all hide as restarting a PC. Then try again and see if the problem persists.

• Behaviour of the size of the image scale will not turn off

  First 8.0.1 (21) CC 2014 10.9.5 Mac.

  I worked with clips on a corresponding sequence so far. Clips are Full HD.

  Now, I want to change in a smaller sequence (1280 x 720).

  I uncheck scale to the image size option.

  Unfortunately, when I put them in the sequence of small clips they are still scaling to the image size. The movement is 100 and the clip tops out at the frame. I tried several sequences and several clips.

  I have 2 types of sequences (sequences AVCHD and GoPro) that do. My graphics (Lower 3rds and others) are NOT updated with the scale to the size of the image.

  Am I missing something? I use wrong image size scale? Is scale of the image size a property defined on the individual item at time of importation if so, that seems like a terrible idea. I would like the possibility to activate the scale of image size, enable or disable depending on the when I want.

  I just found a way to disable the behavior of scale to the size of frame on individual clips after importation. If you right-click on the item in the timeline panel, you can turn off the scale to frame size.

  This action solved the problem! I can even apply this option to multiple clips at once.

  

• My torch of blackBerry Smartphones will not turn on or charge

  After that I'm home from work yesterday I decided to go for free my BB, but unfortunately what happens always was that whenever I plugged in the charger, a red light appears flashing on my BB and it would not turn on or work, I decided to let it charge all night to see if that would be the case. Later this morning, I checked out my Flashlight again to see that it would not even turn on again. I tried to connect to the computer to see if he could load from there, but no luck was found. I contacted then technical support from Rogers to get help, they first told me to do a quick pull out the battery and put it again to see if a reboot might solve the problem, no luck. They then told me to do the same thing, but this time when the red light shows that I would hold the space key for that BB would be start in safe mode, no luck. He then too try to reload the OS of my BB by BB Desktop Manager. Too bad, I could not even connect my laptop to my computer.

  So now I ask you guys to see if there is something else I could do that would fix my BB. Note that I would like a way in which I have to erase the memory of my BB, since I have not backed up the data again (I just bought it 2 days ago). But if I have too, I will.

  Hello

  There seems to be a defect with your handset, you just need to know where it is. What you explained I see that you have tried your feeder area and USB so the problem is not with the charger.

  If possible is that you can try using a battery of another torch? If you don't know anyone with your handset, you should be able to try this in the store one of your suppliers. This battery swap will show where the fault is, if the handset works with another battery, it means that your battery is defective - and if not then it's your handset.

  You will need to contact your network provider to arrange the repair or replacement of the defective material.

  Hope this helps

• Camera freezes on the friends screen, fine on mine, light will not turn off.

  When I video call on Skype my image of the camera freezes on my friends computer but still fine on mine. It happens anywhere between 30 seconds in the call to 4 minutes. For my webcam light stay on beside him, even when I cancel the video call. If I try to call again the audio works fine but I can't use my webcam because he thinks that it is already in use somehwere else.

  The only way that I was able to get the webcam light turns off and I can use that once again is to restart the laptop together, but even then if I try and video Recomposeur it freezes right up again. This happened for a while now, through several updates and it is really starting to annoy me.

  The computer I use is an Acer Aspire V5 - 572P and the webcam that I use is built in a.

  Try first update your driver Intel HD Graphics 4000 version matches Windows 8.1

  http://www.Acer.co.in/AC/en/in/content/drivers

  Version 8.1 of Windows is 10.18.10.3304. You have version 9.17.10.2884 installed (version of Windows 8).

  Also look for an updated for Atheros Wireless driver adapt.

• DesignJet 815 MFP - The Scanner lamp will not turn off

  Before we had the controller and lamp replaced on our venerable 815 scanner card (i.e. before the last apparently got watered by a power surge), I seem to remember that the lamp will auto power off after a period of inactivity to prolong the life of the lamp.

  A new has served without interruption since a few days now, which is not healthy for me.

  I couldn't find anything in the settings, the manual online or on the auto layout PDF user guide... I just imagine that this was how things were at work? If it is SUPPOSED to shut down to protect the lamp, no one knows where this setting is hidden or how to turn it on?

  P.S. This thread has been moved for Designjet scanners. Forum Moderator - hp

  I don't know if this answers your concern, but want to share with you information on the setting of the option "timer" (Figure 8 - WIDEsystem):

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_ba847bafb2a2d782fcbb0710b053ce01=wsrp-navigationalState%3DdocId%253Demr_na-c00014044-1%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.tpst=ba847bafb2a2d782fcbb0710b053ce01&ac.admitted=1400756649874.876444892.492883150

• Red LED on blackBerry Smartphones does not turn off

  I worked on my new Blackberry for days now.  I like the new message indicator, but it will not shut down after you read the message.  I've enabled for SMS text messages.

  Any suggestions on how to get the light to stop flashing after you read the message?

  Try a 30 second with the phone battery pull, replace the battery and see if it returns to normal.

  It is a common solution on these forums.

  Let me know!

• BB 9810 blackBerry smartphones will not turn on

  Hi all

  My BB 9810 morning be disabled (I don't automatically have to turn), but at night be OK.

  When I want to turn on its possible to do, after I put to load, but still didn't work.

  Can I help me someone?

  Thank you

  Hello and welcome to the community!

  Please try this sequence... Note that, throughout the whole 4h15m process, your BB should stay connected to a good charger (not the USB PC):

  1. With battery, connect your BB to the wall charger
  2. Leave it alone for 2 hours, no matter what the LED or the screen not
  3. Remove the battery
  4. Wait 15 minutes
  5. Insert the battery
  6. Wait another 2 hours, no matter what the LED or the screen not

  This has been known to "revive" some BBs.

  It is also possible that your battery or BB has encountered a problem... to test, this sequence is necessary:

  1. Get a known good and already fully charged battery... use it in your BB and see what happens
  2. Get access to a BB good and the same known... use your battery in there and see what happens

  The results of this will show if your BB or your battery that has the problem.

  Good luck and let us know!

• BlackBerry smartphones can not turn off wireless sync

  8330 version 4.5.0.33 (Platform 3.3.0.30). desktop version 4.6.0.6; BES version 4.1.2.15

  I use several address books (personal computer, the company contacts, etc.) I have improved my device and desktop software, and now I can't sync my address via the cable books. I used to be able to go to the address book > menu > options > wireless sync: YES or no. Now, I have no wireless sync option in the address book.

  Anyone know how to get it back? Thanks in advance. Nick.

  Go to address book-> Menu-> Options-> Desktop-> wireless sync: YES/NO

  This applies to OS 4.5 devices.

• Pavilion dv2415nr laptop. It will not stop. I downloaded the software and it will not turn off.

  I have a laptop dv2415nr Pavilion and it will not turn off.  I recently downloaded some security software and it is not stopped since the download.

  Hello

  I recommend that you make sure you have your license key for webroot. Uninstall the software and reboot. If that solves the problem, it's time to go to the Webroot support and ask their tech support that it.

  Kind regards

  ERICO

• "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when trying to install Windows on Windows 8 updates

  Former title: windows 8

  Stuck into that and can't GET OUT! Failure of Windows updates. Restoration of the changes. Do not turn off your computer.

  Hello

  Please contact Microsoft Community.

  We understand the inconvenience that you are experiencing.

  1. How long it stays on the same screen?
  2. Windows Update is causing this issue?
  3. Have you tried to interrupt the installation at any time?

  When you try to install Windows updates, you get the following error: configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer. If this occurs, it may take 30 minutes to undo changes, and then the system will display the Windows login screen. Suggest you not to interrupt this until he completely undo these changes.

  Please see the article below and see if this can help you.

  https://support.Microsoft.com/en-us/KB/949358

  Let us know if you need assistance.

• Default configuration of the windows features. Restoration of the changes. Do not turn off your computer... HEEELLLPP!

  After restart my Asus X55oE due to necessary updates, I got «default configure features windows.» Restoration of the changes. Do not turn off your computer. After reading several messages through other forums, I turned it and then turn again only to receive the same screen. Some of these forums say that it can take 2 hours or more because of so many updates made at the same time. I think I was trying to upgrade windows 8 for windows 8.1.

  I'm really worried about it just because I just got back this PC from ASUS and am needing to work. Can someone tell me if there are other options or make sure that it just take a while? I also read that you can actually go to the control panel > windows update > help to erase mistakes. Also, someone said that you can customize the number of updates at a time can be both. I certainly do not happen again. Help would be greatly appreciated. Thank you in advance!

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand you have questions while, Windows 8.1 in the computer installation.  We are happy to help you in the matter of fixing.

  You can try to follow these suggestions mentioned in the Microsoft article below to solve the problem with the installation of Windows 8.1 because Windows 8.1 is also an update for Windows 8 and these suggestions would help you with the same.

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  http://support.Microsoft.com/kb/949358/en-us

  Note: refer to "How to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  Important: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  If this does not help then, try to disable anti-virus and see if that helps.

  Disable the anti-virus software

  (Also applies to Windows 8 and 8.1 of widows)

  http://Windows.Microsoft.com/en-us/Windows/disable-antivirus-software#1TC=Windows-7

  Note : Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.

  I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.

• Error in Windows 8 update 'failure Configuring Windows updates. Restoration of the changes. Do not turn off your computer.

  When I tried to update my PC it showed an error after restarting, "failure Configuring Windows updates. Restoration of the changes. Do not

  Turn off your computer. I tried again after the reboot. Then after reading on some forums, I ran Windows Update diagnosis and these are the errors I got:-
    
  Help, please!
  Thank you

  Hi Rishwajeet,

  Are you able to boot to the desktop?

  If this occurs, it may take 30 minutes to undo changes, and then the system will display the Windows login screen.

  I suggest you try all the steps which are names like Windows 8 from following link:

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates
  http://support.Microsoft.com/kb/949358/en-us

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode. Also when you do the system restore, you will lose data and the programs that are installed on the date you make the system restore.

  Hope the helps of information. If you have questions related to Windows, please do not hesitate to post. We will be happy to help you.