ScreenSharing stops working after restart server 10.8

Similar Questions

• Network printer stops working after restarting the laptop

  I have 2 PCs both running windows Vista. A PC is a desktop computer ACER with a printer connected to a USB Port (HP Photosmart C4480). The 2nd PC is an ACER laptop also on windows Vista. I have a network home and print away from the laptop. Problem is when I restart the laptop I can't print remotely and do are Add' the printer again. Print spooling is nec automatic and active. I have downloaded the latest drivers HP for the printer. Just a note to say that ACER laptop my son who works in XP does not have this problem and can print after a reboot.

  Hi GaryPolaris and thanks for the answer.

  What is the brand and model of your printer? Have you checked to see if the printer is compatible with Vista? You can check this in the Vista Compatibility Center located at this URL http://www.microsoft.com/windows/compatibility/ . Also, you can try installing the Vista drivers on the XP machine. If the manufacturer has released Vista drivers simply download and install the drivers on your XP machine.

  I hope this helps. Please post back and let us know if it did or did not solve your problem.

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Mouse Bluetooth Wedge stops working after restart

  Corner of the pairs of mice and the work of the session, but after each reboot, Hibernate, or sleep I have to remove and rediscover the device even if the control panel says it works fine.

  Hello

  1. you receive messages or error codes?

  2. other Bluetooth devices work well?

  This can occur if the Bluetooth drivers are not installed properly.

  Method 1:

  You can visit the computer manufacturer and try to install the latest version of the Bluetooth drivers.

  Update drivers: recommended links

  We can also refer to article and check if it helps.

  A Bluetooth device no longer works, and you receive the error code 43 with the event 17 after you resume a computer that is running Windows 7 to sleep

  Hope the helps of information.

• USB ports stop working after windows 7 updates (April 12, 2011)

  After application of the 12 updates successfully (KB890830, KB2508272, KB2506223, KB250212, KB2508429, KB2507618, KB2509553, KB2503658, KB2506014, KB2491683, KB2511455 and KB2446710), my USB ports stopped working after restart. I get this description of Device Manager: Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52)

  I restored the functionality of USB ports by doing a system restore before installing updates.

  What should I do? Ignore ALL updates future windows 7, which leaves the system vulnerable? Help is appreciated thanks.

  I solved this.

  Device-USB controllers-online standard uninstall online Manager pci improved to (do it twice) usb host controller, and then the scanner hardware change and let the win7 to reinstall the drivers.
  Updates were corrupted somehow the drivers, you need to fix manually.

• KMS server stops working after 1 month? Have activated the clients now show not activated.

  KMS server stops working after 1 month? Have activated the clients now show not activated.

  Hi QuinnQ,

  The question you have posted is related to Windows Server and would be better suited to the TechNet community like TechNet is more oriented to professional support. I have included a link below for the TechNet Windows Server community who will support ask you...

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• VB 6 EXE compiled on the server (MS Server 2003) files does not work after restarting Windows 7.

  I work in the field environment.
  Some VB 6 EXE compiled on the server (MS Server 2003) files does not work after restarting Windows 7 PC (shortcut to the server).
  but it runs on the Windows XP computer.
  For example:-Inventory.exe (work), Sales.exe (does not work)
  Help, please.

  Hello

  I suggest you to ask your question at the following link.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/

  I would also ask you to contact your IT Department for further explanations.

• iPhone more replaced 6 speaker stopped working after update to iOS 9.3.4.

  iPhone more replaced 6 speaker stopped working after update to iOS 9.3.4.

  New speaker of iFixit. After replacement speaker works perfectly. With FaceTime, the call, music, etc. And IPhone running on iOS 9.3.3. But after the update to IOS 9.3.4 speaker stopped working. Several restarts and total content and deletion of parameter did not help.

  Axiomer wrote:

  New speaker of iFixit.

  It is a problem.

  iPhones are not serviceable by the user.

  You're on your own.  After this service yourself, you finished your warranty (if she was still in effect), and Apple will not help you either.

• stopped working after upgrade

  Firefox has stopped working after the upgrade to version 27. I reinstalled 26, it's been a while so I thought that the problem had been sorted out, so today tried to install the latest version. Same problem as 27, just does not work when you click it. I have Zonealarm later, and I have disabled all the internet security, control applications and anti virus. The same, followed instructions to remove firefox so reliable programs it tempt me the fact still. But there is no prompt . As a last resort, I uninstalled Zonealarm. Still does not work after a new installation.

  I am a website developer, and all my tools are on Firefox. Chrome never problems with the update, so what is happening here? Surely with the power of Mozilla, that sort of thing shouldn't. AM also on XP SP2 which deserves to be supported on the nocturnal compilations, I just read (cannot upgrade to SP3 for compatibility with other software).

  New version looks ace, so please help.

  It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls

  Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) as a test.

  • http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/

• Satellite Pro A200 - Webcam stop working after 10 to 15 minutes

  Hello

  I need help to solve this problem. I use the Satellite Pro A200 with Windows Vista. When I use my computer online my web cam stop working after and never restart again until my computer restarts.

  Please send me some suggentions how to solve this problem.

  Thank you [email protected]

  Hello

  How did you notice this problem? You get an error message or something else?

  It's really hard to say why this happens, but first I would try to update the driver for the webcam. You can get the latest version on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Install the latest version and try again.

  By the way: you run factory settings or you have installed your own version of Windows?

  Welcome them

• Portege Z10t-a - intermittiently touchpad stops working after mode 'sleep'

  Hello

  I have a protected Z10A and the touchpad and keyboard intermittiently stops working after the mode 'sleep'. I can't wake up, or restart without re-booting.

  I did the update to the keyboard firmware docker as advised in a thread on January 2014, but this did not help the problem.
  This computer is 2 weeks.

  I was download site and updated all the drivers and updates.
  The computer works perfectly except for this problem.

  When the Tablet is in standby, the white led flashes, and it is when everything works fine, but if the light for some reason any does not Flash but still turned on, then it will not start and I have to restart the tablet.

  I have disabled hibernation in the options mode, but still no help.

  Any help would be appreciated.
  Thank you
  mm

  Hello

  I m wondering if the option (in BIOS) called Wake-Up on the keyboard is turned on.
  To restore the functioning of the computer from sleep mode, press the power button or any key on the dock of the keyboard for a short period of time. But the keys on the keyboard can be used if the option is enabled.

  Note: when the laptop is in Sleep Mode, the power indicator of will blink white. If the light flashes white, the computer laptop isn t set mode sleep!

• on dv6 fingerprint reader has stopped working after installing Norton 2012

  Fingerprint reader has stopped working after installing Norton Internet Security 2012 on both of my notebooks from HP.

  Product name: HP Pavilion dv6

  Operating system: Windows 7 64-bit

  Error message in Device Manager under biometric devices in Device Manager displays an exclamation mark beside validity sensors (WBF) (PID = 0018). The following message is under the general tab: "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) ».

  Driver is present and seems to be up-to-date.

  Appreciate your help.

  I have finally isolated the problem of my software lack of HP dv6 fingerprint reader. I think Norton Removal Tool, available online at www.symentec.com/nrt, was the reason. I am sure this conclusion because the exact same problem occurred after I installed Norton Internet Security 2012 on laptop HP same as my wife. I tried, in vain, to uninstall and reinstall the driver for the biometric fingerprint device provided by Validity Sensors, Inc.

  After spending a day and a half to try to "solve" the problem, I decided to restore my system and go back to the prior agreement of the point of the installation of Norton. Thank you HP to make this process quick and painless. Don't forget that if you installed anything after the restore point, it will have to be reinstalled.

  Fortunately, there's a less intrusive on CD of Norton removal tool. This utility uninstalls an older version of Norton you are requested to restart and then installs the latest NIS. It is a method of removal safer that wide brush offered by the Norton Online link, which wipes everything remotely suspect.

  After reinstalling Norton Internet Security 2012 from the CD, everything works as it should, including the fingerprint reader.

• Windows Explorer stops working after that I have to use Windows Update

  Currently, using Windows Vista Ultimate 64-bit service pack 1. After that I restarted the computer to finish the update/install Windows I can't use the functions from the Start button. Any attempt also runs programs through the Task Manager is met even uselessness. I gives me the error that Windows Explorer has stopped working and restarts. However, all program shortcuts that I have on the desktop can be used.

  The only way to solve the problem for me is to use the system restore to take me to a previous time when I didn't have the problem. However if I try to update by using windows update I experience the problem again.

  Im trying to download update is Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update (KB951847) x 64

  Finally, I'm sorry if I posted in the wrong forum, I don't know where to go. If posting in the wrong forum, I would appreciate a link to the right pair.

  -Josh

  Hi Josh, I had the same problem with Windows Explorer on a HP Vista Home Edition 64-bit computer, it would keep restart loop and stops also all the programs in the taskbar.

  I searched different forums and I tried different options, but nothing worked until someone said it might be a virus. I have Norton but it does not detect anything, so I tried Defender of Windows (that I had turned off because I had Norton) of Windows Defender found this startup program called mwau.exe to rest under C:\recycler\(random numbers...) but when I open the C: drive, I couldn't find anything manually, but there is no option to delete or disable it through Windows Defender.

  Then I Googled that name and found a software called free Antivirus "Malwarebytes anti-malware 1.41 ' recommended by CNET download.com, it's a small program, but I downloaded and ran, it found and removed this mwau.exe, I have not had problems with Windows Explorer after that, apparently mwau.exe means (I think) auto update for Microsoft Windows.» But after its removal, I have more problems. My updates of Windows runs as usual and I get new updates as usual, but this muau.exe was probably evil viruses do.

  Here is the download free link http://www.malwarebytes.org/mbam.php
  In addition, when you click on download the exe file name is mbam-setup

  Good luck. See you soon.

• USB modem stop working after long time and I have to unplug then plug it in again, I want to solve this problem without unplugging and plug?

  USB modem stop working after long time and I have to unplug then plug it in again, I want to solve this problem without unplugging and plug?

  Hi ahmedman_10,

  ·         You follow the steps in the article of my previous answer?

  Follow these steps in my previous answer and at the same time this article, follow these methods.

  Method 1: Follow the steps in the article.

  USB port may stop working after you remove or insert a USB device

  Method 2: Update the latest drivers for chipset.

  How to manage devices in Windows XP

  For reference:

  Why my computer does not detect my new USB device when I run Windows XP or Windows Server 2003?

• How can I fix Vista 64-bit OS on a HP that keeps generates error message: Windows Explorer has stop working. wait, restart, or shut down.

  It seems after I did a disc clean up around an update of the system of MS, I started having sites is not responding message 'updating of web page' and other this same message if I do not know
  "Windows Explorer has stopped working, wait, restart or close the program.  What is the cause?  I don't have a Vista disk... it came with my HP dv5 Pavilioin.

  If anyone has any ideas... Please help...

  Thank you

  I told you to do many things. What you have tried and what you are still trying (if we can get a happening of todo list and I can check it)? Have you managed to find the results of chkdsk?

  Copy and paste so the formatting is good. It is a single line. If you get an error message, you can copy it by right-clicking in the window, choose the brand, by selecting the text, and press ENTER.

  There are communes of false positives of SFC so do not assume that something is actually corrupted until we see what files it complains. Settings.ini, desktop.ini, tcpmon.ini and ending with mof files are false positives.

   
  For the results of the SFC
  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   

  findstr/c: "[SR] cannot" %windir%\logs\cbs\cbs.log|more "

   

  It will be able to see which files are corrupted.

   

  To see if there

   

  findstr/c: "[SR] repair" %windir%\logs\cbs\cbs.log|more

   

   

• My CD/DVGW device stop working after iTunes was installed with Apple records.

  My CD/DVGW stop working after you install the program iTunes with Apple records. The letter (e) are attributed to him does not appear in computer (Windows Vista Home Premium), as it was before. Every time the PC is switched on or reboot, a message from Apple saying "AppleSyncNotifier.exe point of entry is not found. The procedure entry point sqlite3_prepare_v2 could not be found in the dynamic library SQLite3.dll. "The HP device proves that this CDROM works. iTunes has been removed, but the apple files are still there. Driver Detective advised to remove the filters from the registry. Only the filters 'less' appeared and has been deleted. This does not solve the problem. Should I delete all Apple records that have been installed with iTunes? This will damage other programs?  Reinstall the driver for this device does not resolve the problem.  !  yellow sign keeps appearing in the parity for this device handler. Systen restore does not a remote date just to put it as he was back. Can someone help, please?

  Hello

  Having too many competing programs from loading at startup CD/DVD can cause these problems.

  Deleted? Or did you correctly uninstall iTunes? Check with iTunes support for complete hair removal methods.

  ---------------------------------------------------------------------------------------------------------------------------------------

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">