Screenshot of an endpoint?

Similar Questions

• How to give endpoint network Stream as input/output for a Sub VI

  I have a program to write data to a stream and to read using the host. In the reader program, I have a Subvi, which I need to pass endpoint network Stream. I'm unable to do so.

  https://decibel.ni.com/content/docs/DOC-15920, in the program in the link, he said he a VI that reads an element in the stream. If you see the screenshot, it connected endpoint network Stream for a subVi.I am unable to do so. A can you please tell me how to do it.

  Thank you

  You will need to place a data network flow control in your Subvi. You then connect the control on the part of the connector.

  You can place a control of flow network as follows:
  In primary VI you take the wire of network flow and right click. Select create - control. Use strg + x for the main control of the VI to the Subvi from the port.

  Then follow the instructions here http://digital.ni.com/public.nsf/allkb/1FA00093A04BFCF5862570920049E482 to connect the control to the connector pane.

  There may be an easier way to do it, but it works very well.

  I hope this helps!

• TMS conference control center

  Hello community,

  We have TMS version 14.6. My question is why we cannot see the screenshot of the endpoint on the control of TMS conference center?

  The endpoint is SX80 TC7.2.3. We do not have the key Option Remote monitoring installed on the endpoint. Is this the reason why we cannot see the snapshot? Do we need to buy the key to activate it?

  Monitoring.PNG

  

  I expect this on our TMS:

  remote_display.PNG

  

  According to the names of devices hosting the conferences, I guess that for the image where no snapshots are seen is a driver (cisco-cndtr), and the other is a MCU (MCU - SD) product?

  If this is the case, snapshots are not supported with the conductor, see CSCuj02741.  When you use the driver, only a subset of the features of CCC are supported, see the section "Follow-up Conferences" of the CMR premises Solution Guide release 7.0 on pg 28.

• Bulk 6.2 and vSphere 6 no resources available for bookings

  Hi all

  I spun a vSphere brand new brand 6 environment using vCenter device (with SSO and vCenter distributed on different devices) and installed the NSX.  Everything works as expected.  Then I installed vCAC 6.2 (using the SSO vCenter for auth) and everything seems to work except that when I added the new end point for vCenter and NSX I get no calculation/storage/network resources available to place in a new reservation (Group of fabric absorbs the cluster if communications seem to be ok between IaaS and vCenter).

  Here's a screenshot of my endpoint: -.

  

  Here is a screenshot of the tissue group: -.

  

  Here is a screenshot of the new booking:-

  

  Anyone got any ideas where I have gone wrong?

  Danny

  MSDTC is configured correctly?

  What the newspapers are similar in Infrastructure > surveillance > Log?

  See you soon

• Cannot configure a Hyper-V reservation

  I followed the steps successfully to 'Create an Endpoint of Hyper-V standalone' (page 15 in the "Configuration IaaS for virtual platforms - vcloud Automation Center 6.0" document ")

  Also with success, I created a group of fabric and was able to select Hyper-V resources for the section of the tissue group computing resources.

  The question that I am running is that I can't create a reservation for the business group as described on page 23 of the same PDF referenced above.  Specifically, under the new booking > virtual, the only option is to vSphere (vCenter).  No, there is no reference to the Hyper-V environment.  (See attached screenshot.  Two endpoints visible there are criteria of vSphere.)

  For what it's worth, I can not also create an endpoint of Hyper-V.  I don't know if it's a symptom of an underlying or related problem.

  What gives?  I'm doing something wrong?

  What is the correct procedure of connectivity vCAC of installation in a Hyper-V autonomous environment?

  It's most likely a problem with the license.

  Are you running vCloud Suite or vCAC Enterprise?

  vCloud Suite covers you for settings other than vSphere, and is usually permitted on a basis by socket.

  vCAC Enterprise is allowed on a per-vm basis and gives access to all the other endpoint (Hyper-V, OpenStack, AWS.)

  I hope this helps.

  Alex

• Instant Web or screenshot of the touchpad EX/C/MX series

  Hello all together.

  is it possible to take a print screen of a touchpad ex / c / series MX in the current situation as call / directory / ect...

  I need a few screenshots of the oder real status screen of the touchpad and not a photo :-)

  THX for your answers

  Hi Rasim,

  With TC6, it is possible to capture screenshots of the touch interface by entering the following URL:

  http:///web/translation.

  Capture screenshots of the 8 Touch is supported only on systems that have a directly connected touchscreen: MX-series and Ex-serie or C40, C60 and C90 endpoints when you use 2 Port Ethernet.

• Error endpoint still CS6 Timeline button

  

  Adobe has managed to make the burning a DVD project as impossible as possible.

  WIn 7 Pro 64-bit

  I downloaded the previous version of Premiere Pro (PP) 6 and installed to get even. Then I had to uninstall Premiere Pro 6 because she was breaking my rip in PP CC. I download and install the business content for even 6 (EN6).

  I open my PP CC project. I built my project entirely in a timeline in PP CC. He has hundreds of images, video clips, voice over and music. I added 8 chapter markers on my calendar and named appropriately. I exported a DVD Mpeg2 audio and video in my folder of DVD. I took a screenshot and it has exported for PS CS6 and made a PSD.

  I have everything set EN6 and began the construction of my menus. I have a video file and audio file in the timeline IN 6 with 11 for the whole movie chapter markers 27 minutes. I want only to 8 in the menu. I create poster frames and assign them to the chapters of the scenario. I brought my psd and set as background from the menu. I chose the video movie button from the button panel and dragged on the screen. I've duped the button until I had 8 for each of my 8 scenes emerging from a timeline. I name each appropriate button and associate each button with the scene on the right and go to the chart.

  In the flowchart Panel all my scenes appear under the thumbnail menu and they are all named correctly and to start the scene correct when you click on it. However the inches of individual scene can be associated with an end point, and they all have the same name. I type any name in the field name of timeline becomes the name for every inch of the stage. In this case they are all named "1". I don't get to associate a thumbnail of all the 8 inches to an endpoint and every other inch receives the same end point I guess its ok because I want them all to go back in the menu at the end.

  Technical support Adobe says it is a matter of workflow, but cannot determine what the problem in my workflow. There is no resource that they find online for me and I can't find anything relevant to the question. So he advised me go where the real experts are - Forum - Pat yourselves on the back are you all there unsung heroes working these forums. Too he me had send my EN6 file and will come back to me in 4 to 7 days.

  Anyone has any idea what I did wrong in my workflow PPCC or EN6 to create this problem?

  Does anyone have an idea what kind of dope the first team pro engineering was smoking when they developed this great way to create a DVD?

  It's frustrating. It resembles a reinstall...

• Invalid endpoint vShiled license

  Hi all, this is my first post ...

  I hava a question and hope someone has solved a similar problem. I think that the solution is simple, but I can't understand it.

  I've set up a small test environment:

  1 host ESXi 4.1

  1 windows VM 2003 std

  1 VM Win2008r2

  1 vShield virtual appliance manager 4.1

  1 deep Security Virtual appliance (disabled for the moment)

  The target is stable Trend Micro deep security before implementing it in the production servers and verify the impact in a structure running.

  I have installed on the client machine to Win2008 vsphere, vcenter and registered vshield plugin successfully, but tab vshield-> status of endpoint that don't, I see that it is disabled because no license is present.

  Well, I have the licenses that will be used in the production environment, but when I try to assign in the configuration already tab-> features-> edit-> license key I get the error "invalid license key: not found license file.

  Anyone have / solved a similar problem?

  Thanks to all in advance.

  In my setup, this error is thrown when I get license wrong / incorrect.

  If the license is correct--> the license details are shown as product, ability, etc. Expires. See the screenshot below.

  

  Check if your license key is correct, or log a ticket with Jack support.

• Can't take screenshots after update

  After updating cannot take screenshots with iPad or iPhone 5 s. down Siri or home screen or power. Tried the stuff on google, but nothing helped!

  Very quickly and simultaneously press on and then stop pressing the home and on / off buttons.

• screenshot of iPad does not work after 10.0.2 download

  I got the new OS 10.0.2 happen on my iPad to install. Install took about 10 minutes, a lot of changes, as I can see, but went to use the screenshot and it no longer works.

  Anyone else found this problem or have a solution please.

  It's just a little trickier--although still well

  Press the home and power/sleep button together and release them quickly.

  The screen should Flash indicating that a screenshot has been taken

• iPhone instead of resetting screenshots

  Hi all, I have an iPhone 7 that works fine apart from the fact that I try to do a soft reset (hold power + "home" button) it does nothing except when I release the buttons it takes a screenshot.

  Apart from that I have no problem using two buttons and the phone works very well, I can't do a reset (which I think I may need to do iron on some software quirks)-I tried holding it for as long as possible, but after a minute, the screen automatically goes mode sleep If I released before then it's just takes a screenshot.

  Have also tried pressing both buttons in various orders, but same result no matter what.

  Any ideas?

  The iPhone 7 uses the button On / Off and Volume to perform a reset button.

• IOS screenshot 10.0.2 - not possible

  Since updating to IOS 10, its not possible to make a screenshot using the home and power button.

  Someone at - it a solution for this problem?

  Thank you

  Rainer

  It works in the same way he has always done on my iPhone 6. Try to restart your phone and try again.

• Screenshot on iOS 10.0.2 does not

  JJust upgraded to iOS 10.0.2 and screenshot function does not work correctly.

  By pressing the power and the home screen just once catch ONCE.aftwr a restart, but still doesn't work.

  Only, it restarts the phone or throw Siri

  WHY did Apple remove such a valuable feature?

  NickyC53 wrote:

  Only, it restarts the phone or throw Siri

  If the iPhone restarts, it means that you pressed the button too long.  You must quickly press them together.

  If Siri is started, it means that you pressed the home button but not the power button.

  The screen shots work just as they always have done for me.

• take screenshots with mac 10.2 Sierra iOS

  take screenshots with mac Sierra iOS

  Are you referring to Mac OS Sierra 10.12 (for computers) or iOS 10 (what is iPhones, iPads, etc.)?

  On a Mac OS computer, you can command + shift + 3 for the entire screen or command + shift + 4 to select a part of it with your pointer.

• How to take a screenshot of Apple Watch?

  I took accidentally a screenshot of my screen shows a few times now, but I don't know how it happened.

  The ideas people?

  To take a screenshot you must hold down the side button and press and release the digital Crown.

  How to take a screenshot on your Apple Watch - Apple Support