"Script failed (the language is formcalc...). -"error: incompatibility of Argument...". »

Similar Questions

• The script failed - formcalc

  Hello

  I am very new to LiveCycle Designer, and I get the error message: "Script failed (the language is formcalc;» context is xfa... The error error: syntax near token ' (' on row 3, column 0.)

  I just add some numeric fields. The calculation works fine, but I want to get rid of this, any error message?

  Here is the code I have in the Script Editor:

  Form1. Page2.TotalEnrollment::calculate - (FormCalc, client)

  TotalEnrollment.rawValue = NumericField1.rawValue + NumericField2.rawValue

  This doesn't make any sense I have yet one "(" in my syntax...
  

  Thank you!

  Hello

  With FormCalc, you don't need .rawValue.

  Also that the script is in the object you want to set the value, you can use $ instead of the name of the object.

  Try:

  $ = NumericField1 + NumericField2
  

  Make sure you have not a mistake, as I suspect that this could be the problem.

  Niall

• install the language pack fails with "error code 2" in vista ultimate sp2.

  I installed sp2 for vista through the standalone version and not through windows update, because I have the Greek version of windows and I couldn't wait for sp2 to be offered on windows update to get so I got from the stand-alone version.
  but when the service pack is installed it does not remove the previous language pack, I had already installed on my pc (I thought it would be automatically deleted during the installation), and I removed it later after installation of sp2.
  and now I can not install the new language packs and updates windows offers me.
  any help? for those who want the truth revealed open their hearts and their secrets unseal right now until the now from now who complete memories for those who are now in this House only truth will be heard from the mouth

  Hello Pavilion_alex, Nice to see your response, welcome on the forum of Microsoft Vista again. First of all, please uninstall the previous language pack to go to programs and features. Please download the config file for 32-bit from the link given below and install it in a clean boot state. The link for the language pack is: http://support.microsoft.com/default.aspx/kb/942903 the steps to do a clean boot is: http://support.microsoft.com/kb/331796 hope this solves the problem. Please let me know about the results. -Best regards, Shaolin Roger Thapa Microsoft answers forum vista

• Failed to start oracle-ohasd, error: ioctl inappropriate for the ohasd device was able to start to roothas.pl

  Hello

  I am trying to install the Oracle 11.2.0.1 on Oracle Linux 7.0 database 64-bit deployed on VirtualBox. I'll put up a single on making ASM instance database so the grid on a stand-alone server installation. I launched the installer of grid with YES. When I run the script from root

  /U01/app/grid/product/11.2.0/grid/root.sh

  I get the following error:

  Default: no such file or directory for the command/sbin/initctl start oracle-ohasd

  Failed to start oracle-ohasd, error: Inappropriate ioctl for device

  ohasd could not start: ioctl inappropriate for this device, /u01/app/grid/product/11.2.0/grid/crs/install/roothas.pl line 296

  After installing Oracle Linux 7.0 there is no/etc/init and also no/sbin/initctl created automatically under Linux. I don't know if these directories need to be created automatically or not?

  I googled this problem. Most of the solutions is like this:

  """"""""""""""""""""""""""""""""""""""""""""""

  Hello

  Problem is indeed due to the incompatibility of the upstart/init. Here are the average working:

  1) proceed with the installation as usual until root.sh invocation.

  (2) prior to root.sh edition $GRID_HOME/crs/install/s_crsconfig_lib.pm, go to line 1173 (you should find a code like: if ($srv eq 'ohasd') {# OHASD Start).

  (3) insert a following code snippet before starting the game OHASD (line 1173)

  My $UPSTART_OHASD_SERVICE = 'oracle-ohasd. "

  My $INITCTL = "/ sbin/initctl;

  ($status, @output) = system_cmd_capture ("$INITCTL start $UPSTART_OHASD_SERVICE");

  If (0! = $status)

  {

  error ("' cannot start $UPSTART_OHASD_SERVICE, error: $! '");

  return $FAILED;

  }

  (4) create a file /etc/init/oracle-ohasd.conf with the following content inside

  # Start OHASD oracle

  start the runlevel [35]

  Stop the runlevel [. 35]

  respawn

  exec /etc/init.d/init.ohasd run > / dev/null 2 > & 1 </dev/null

  (5) call root.sh

  (6) complete the installation.

  If you have already run root.sh (unsuccessfully), simply roll back:

  $GRID_HOME/crs/install/roothas.pl - deconfig - force - verbose

  Make changes above and continue.

  """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""

  The part above is not the solution!

  How to solve the problem?

  Thank you!!!

  11.2.0.1 is not supported on RHEL7, even on RHEL6, you must install at least 11.2.0.3.

  You can see the matrix certification Oracle Support for Linux look at this document: master Note Linux OS requirements for database server (Doc ID 851598.1)

  Kind regards

  Oscar

• PowerCLI Script to the report on the failed VM jobs

  I figured out how to report on the events of VM (get-vievent), but no has no stains of VM. If a snapshot of the virtual computer fails, sometimes it never connect the events of the VM, but lists an error on the display of tasks. We are trying to monitor the clichés failed since its part of our backup solution.

  I was looking for a way to report these tasks/failure of events in a daily report, or simply add to the daily report of amazing Alan Renouf that we use.

  does anyone have any suggestions? For an example, see the attached screenshots. See how, in the view tasks, you have mistakes, but in the view of events, there is no errors.

  Any help would be great. Thank you!

  Jeff

  PowerCLI Script to the report on the failed VM jobs

  I figured out how to report on the events of VM (get-vievent), but no has no stains of VM. If a snapshot of the virtual computer fails, sometimes it never connect the events of the VM, but lists an error on the display of tasks. We are trying to monitor the clichés failed since its part of our backup solution.

  I was looking for a way to report these tasks/failure of events in a daily report, or simply add to the daily report of amazing Alan Renouf that we use.

  does anyone have any suggestions? For an example, see the attached screenshots. See how, in the view tasks, you have mistakes, but in the view of events, there is no errors.

  Any help would be great. Thank you!

  Jeff

  Hi Jeff

  I had exactly the same need to identify stereotypes having failed and drilled until SDK and LucD suggestions (thank you) to encode the following lines:

  $vmlist = Get-VM |sort Name
  
  foreach ($guestname in $vmlist)
  {
      $hours = 48 # Number of hours back
        $tasknumber = 999          # Windowsize of the Task collector
  $taskMgr = Get-View TaskManager
  
  # Create hash table. Each entry is a create snapshot task
  $report = @{}
  
  $filter = New-Object VMware.Vim.TaskFilterSpec
  $filter.Time = New-Object VMware.Vim.TaskFilterSpecByTime
  $filter.Time.beginTime = (Get-Date).AddHours(-$hours)
  $filter.Time.timeType = "startedTime"
  
  $collectionImpl = Get-View ($taskMgr.CreateCollectorForTasks($filter))
  
  $dummy = $collectionImpl.RewindCollector
  $collection = $collectionImpl.ReadNextTasks($tasknumber)
  while($collection -ne $null){
  $collection | where {$_.DescriptionId -eq "VirtualMachine.createSnapshot" -and $_.EntityName -eq $guestName} | %{
  if ($_.State -eq "Error") {
          write-host $_.EntityName
          write-host $_.StartTime
          write-host $_.State
          }
      else {
      }
  }
  $collection = $collectionImpl.ReadNextTasks($tasknumber)
  }
  $collectionImpl.DestroyCollector()
  
   }  
  

  This script displays the name of the virtual machines which met with an instant failure in the last 48 hours (a variable, you can change)

  This is just the beginning, because I want to count the shots failed and identify virtual computers that have more than 2 in 2 days

  Feel free to alter it at will.

  Enjoy

  Eric

• [JS, CS3] a script to change the language in all styles of paragraph

  Hello

  I made a script to change the language in all styles of paragraph for "French", but when I run it I get the error: "Invalid request on the root style. Could you please tell me what I'm missing?

  myDoc = app.activeDocument;
  myStyles = myDoc.paragraphStyles;
  for (i = 0; i < myStyles.length; i ++)
  {
  myStyle = myStyles [i];
  myStyle.appliedLanguage = "French";
  }

  Parargaph Style #0 is [No Style], and you cannot change this way. Simply start your loop at 1.

  Style #1 is [Basic Style], and if you have trouble as well to change this, simply start at 2.

• verification failed - there was a connection to the Apple ID server error?

  I am signing in iCloud, but whenever I try, a message appears saying: "check failed, there was a connection to the Apple ID server error" I can't use all the apps, and I tried to restore my iPad and reset my network settings and nothing works. Help, please!

  Try to connect to iTunes and insert it again (I know you talk about audit iCloud, but the signature of and then back into iTunes will ensure that the password that is stored on your device for your ID Apple is correct: settings > iTunes, select Apple ID, click on Sign Out, and then sign.)

  See you soon,.

  GB

• Apple TV 4th generation "audit failed there is a connection to the Apple ID server error."

  Can Hello someone please help me?

  I have a 4th generation Apple TV and I can't seem to accept my apple ID and password.

  That's what I've done so far:

  Chosen English (United Kingdom)

  Chosen UK

  Tried to associate a device with the establishment (iPhone 6s)

  Has no more than 10 times, even if the password is correct

  Error message that appears is "audit failed there is a connection to the Apple ID server error."

  Tried the manual log, same error message.

  Tried the manual paper but this time I skipped the Apple ID Login, to see if I could connect via iCloud and ITunes manually in the menu, same error message appeared.

  It recognize my wifi, so this isn't a problem. Restored to factory settings.

  Connected on my computer apple laptop not and connected on iTunes Music store to enter the password and verified it was OK, write down each letter/number, I typed the.

  Tried to pair the device several times over, has kept getting the same error message. The manual bit once again, same error, again restored factory settings.

  Went on my iTunes on my phone account and disconnected, and then reconnected in.

  Tried to pair the device several times with the same result.

  Tried to do the manual setting over 15 times. Same mistake. Restored the factory settings once again.

  Changed my password for my iPhone and laptop updated Apple.

  Because the Apple TV is now connected to my wifi that he decided to do an update. I waited 15 minutes for this, so I could try to use my new password for apple now.

  Tried to pair the device again. Still getting the same error message.

  Why is it so difficult? What I'm doing wrong here? I did this for 2.5hrs now. Can someone help me please?

  You are in the United Kingdom

• my iphone says verifivstion failed there is a connection to the apple id Server error

  my iphone says verification failed there is a connection to the apple id Server error

  What are you trying to do when you get this error? Sign in settings/iCloud?

• TestStand 4.2 string not found error in the language resource files

  I installed the TestStand 4.2 on two Windows XP computers.  On a machine it worked fine first time. On the other machine, I get the following message if poster in the login box and also in the component models: ' String not found in language resource files. "I tried uninstalling and reinstalling TestStand twice but you still get this error.  This error is preventing me from being able to log in as administrator, so I am unable to use TestStand 4.2. I understand that these language resource files are supplied by the installer, but for some reason, it seems that the machine with the error cannot locate these.

  The only difference between the two XP machines I can find is the location of user profiles.  I note that on versions of TestStand compatible Vista, that TestStand user settings are stored in C:\Documents and Settings\All Users\Documents\National Instruments\TestStand 4.2\Components on XP machines.  On the XP machine with the error all the user profiles are stored in C:\profiles, instead of C:\Documents and Settings.  This is the standard profile used by our company so I am not able to change that. TestStand Setup recognizes this and install for C:\profliles\All Users\Documents\National Instruments\TestStand 4.2\ TestStand user parameters.  Does anyone know if the location of user profiles is important, or if there is another cause of this error?

  Kind regards

  David

  David-

  The cause of the channels being found is probably at the first launch of TS, the language files are not found. The language files contain default values, and these values are kept as actual values during the recording of the configuration files. For example, the default administrator name and the default folders in the Insert palette. I would recommend that you delete the file Users.ini and Templates.ini in the configuration directory and this should address your current behavior. I don't know why the connection appeared a problem because I was able to use the blank password on the user 'String not found in language resource files. If you still have problems with the connection, let us know.

  You remember something unique about how you came to this situation that caused this to happen?

• Member not found error when trying to add the generic script in the windows 2003 cluster

  I tried to add a generic script in the cluster windows 2003, I've already done a script with the extension .vbs, but when I tried to add the path of the script file its gives me an error indicating that the Member could not be found. Can you help me about this error?

  Hello ishuvbaidhya,

  Your question may be the best answer in the forum TechNet for Windows Server.

  Please transfer your question in forum Windows Server below.
  http://social.technet.Microsoft.com/forums/en-us/winserverManagement/threads

  They will be better able to help with your problem.

  Sincerely,

  Marilyn

• Error when changing the language of the front panel in Japanese

  Hello world...

  I'm changing the front panel of the English language to Japanese. To do this, first I exported the strings through the Tools->Advanced-> export channels.  After that I changed one of the label in Japanese and saved with Unicode encoding (as with normal ASCII coding Japanese texts will not be read). I imported the same file I recorded in a Unicode encoding format. But it shows that the error given below

  "Error analysis during the import of channels
  to test Main.vi
  of D:\Riyas\Work\X 520\28-11-15\X520 RT-Host 20151127\Strings\Test Main_Import 1. txt
  "Saturday, November 28, 2015 11:09:14.

  (See the attached screenshot of error)

  So I tried to import the same file ASCII coding mmee, then it is successful. But the problem is that the modified label is not in Japanese that it shows a few points mark. I'm able to import the channel file saved in ASCII format code but the channel with coding ASCII file will not read Japanese texts. So please help me to solve this problem.

  I need to import a channel file saved with a Unicode encoding or in any case format to enable Japanese texts as ASCII coded format.

  I modified the configuration settings to activate the Unicode format as follows "UseUnicode = TRUE'." I'm using Labview 2014.

  Thank you...

  racahmd wrote:

  My requirement is to change the language of the labels on the front. Is it possible to export the settings of the legend and label parameters separately? Currently, I am only able to export the two together. Also when I import the unicode file that does not contain unicode characters, it shows the same error.

  Perhaps the requirement is statesd as such because the people who wrote the requirement had no idea, you can keep the labels even but change the subtitles only.  Changing labels is a massive effort that could have profound ramifications to the code itself.  Not the same with a legend.

• any ideas? Installation failure: Windows failed to install the following update with error 0 x 80070663: update of security for Microsoft Office System 2007 (KB972581). That's what I get away

  Installation failure: Windows failed to install the following update with error 0 x 80070663: update of security for Microsoft Office System 2007 (KB972581).

  
  

  any ideas?

  Suggestion: Try to do a repair of Office 2007 installation, then try the updates (after a reboot).

  How to install and repair 2007 Office features
  http://support.Microsoft.com/kb/924611 TaurArian [MVP] 2005-2010 - Update Services

• Failed to start service Windows Firewall/Internet Connection Sharing (ICS) on the local computer. Error 5: access is denied. »

  original title: error 5 access denied firewall

  Failed to start service Windows Firewall/Internet Connection Sharing (ICS) on the local computer. Error 5: access is denied. »

  Hi vipin sharmavg,.

  1. did you of recent changes on the computer?

  2. do you have security software installed on the computer?

  See the below Microsoft article and try the steps mentioned, check if it helps.

  You cannot start the Windows Firewall service in Windows XP SP2

  http://support.Microsoft.com/kb/920074

• While trying to upgrade to remote desktop I get the following error message: Setup cannot update your Windows XP files because the language installed on your system is different from the update language.

  KB952155 Setup Error.

  While trying to upgrade to remote desktop I get the following error message: Setup cannot update your Windows XP files because the language installed on your system is different from the update language. Now, that - what it means and how can I fix it? I have installed SP3

  Eivind Aakhus Hello,

  If you have the latest version of Office installed on your computer remotely, then you need to enable the Active X control.

  Follow these steps to activate the ActiveX module.

  a. open Internet Explorer by clicking the Start button, and then click Internet Explorer.

  b. click Tools, point to manage add-ons and then click Enable or disable add-ons.

  c. in the list view, click to view all ActiveX, ActiveX controls downloaded controls.

  d. choose the one you want to activate, and then select Enable.