Scripts from the user interface.

Similar Questions

• Flatten to a string to send arbitrary objects by messages from the user interface?

  Hi people,

  I am trying to send arbitrary data by messages from the user interface defined by the user to my labview interface. Something funny happens then: if I send the data through the message of ui, it seems I have something strange. There is only one character or nothing in the message of the user interface that reached my reminder.

  It seems that flatten channel also creates control characters that are interpreted by NI TestStand and Labview not as members of the chain, and for this reason I only get incomplete data. within the action of testand, which creates the flattened data, I put a dialog box to display the string data, and it seems that at least up to 255 (ascii) characters are used.

  Is there something like uuencode/uudecode to avoid this problem?

  Thanks in advance

  Okidoki, found.

  His «binary"produced by «Flatten the string» string Apparently I thought, the LabVIEW data type is incompatible with the API of TestStand from LabVIEW. In conclusion I would classify this as a bug (sorry people, at least there should be documentation) API for LabVIEW TestStand 2014.

  As a solution, I use flatten it in XML, which is a printable and human readable 'normal' string.

  It was trial and error, and I'm not enjoying this.

• WIN8 registers touch but no reaction from the user interface?

  Anyone having problems with Win8 button when your fingers are clearly registered (Windows gives this feedback from the spherical ripple effect) but the user interface under your finger does nothing? No not the button and so on.

  I live it with some Chrome for example, with the small button tab when it is near the top edge of the screen.

  If I drag the window to the center of the screen, I have no problem with getting keys recorded. Hit the button new little tab gives no trouble.

  When user interface elements are close to the edge, no reaction, even if the wave indicator appears.

  Cannot know if it is a driver or a HW problem. I use X220T.

  Example screenshot

  May be a problem with Chrome, in fact. Tried with Firefox and the new tab button is a lot easier to hit. ---> will give Chrome devs a hint

  EDIT: what you know! The new beta version has already dealt with this issue:

  https://www.Google.com/chrome/browser/beta.html

• Slow response from the user interface with acquisition of data of type long time

  Hi all

  I have a question to ask more out of curiosity than necessity right now. I've built a program that acquires data from the accelerometer and the Treaty in a number of ways: filtering, FFT, FRFS, things like that, but the answer of the UI is still slow, because I need a resolution of frequency of 0.2 Hz for my data domain, which means that the sample acquisition time is 5s and all this awaits before execution.

  My question is this: is there a way to completely isolate the user interface of data acquisition so that it responds immediately?

  I tried a design model of producer consumer with queues, but found everything to be always waiting for samples to be taken. Maybe it was exactly as I did.

  Thank you

  Phil

  If you need to sample for 5 seconds in order to have enough data to analyze, so unless you can "predict the future" and "knowing" the five seconds of data, simply wait for the data that arrives.  Using parallel loops of producer-consumer will allow data acquisition to proceed (for the next 5 seconds of data) while you do the analysis, but you still have to wait for the data to be analyzed.

  Note that the previous paragraph assumes you are collecting data in 5 seconds 'chunks' and analyze each "chunk" (independent) on arrival.  You could also do something like having a "second 5 sliding window" which moves, say, a second at a time, giving your FFT a finer resolution of 'time' (at the expense of their independence).  This would be a (slight) change in your loop of producer (you want to taste in 1 second pieces, accumulate 5 these pieces) and the consumption loop (start analyzing, spewing a FFT every second, while replacing the older "chunk" with the most recent - a queue with loss can do for you).

  Bob Schor

• Feedback from the user interface

  In the Simulator (090), when the user selects the gear (top right) to display a list of parameters to select, the bar of the background and button scrolls down.  However, it is not intuitive how to return to the "main" screen  Still, the down arrow in the main screen button bar pointing downwards and is grayed out.  There seems to be a second "up" button placed in the Center, but it is masked by the "Media" button  Suggest that it is more obvious to select and restore.  Suggest you hide the button bar, make the less gray background and make the arrow more obvious upward so that the user knows that they can select the area to restore.

  Don't forget, this is still in phase beta/Simulator, I am sure that the final design of the user interface will be better/more intuitive.

• Script of the user interface

  If having a button, when click "Button 1", it will be the second dialog box pop up, then click on "button 2", need of third pop-up dialogue ".

  but can't pop the third dialog box, why?

  w = new window ('dialog', 'Test', undefined, {resizable: true});

  var myText = w.add ("edittext", undefined, "", {multiline: true})

  myText.alignment = ["fill",""];

  myText.minimumSize = [300, 30];

  w.Location = [55, 140];

  MYPRINTER = w.add ("button", undefined, "Button 1");

  var w2 is new window ('dialogue');.

  W2 .add ("button", undefined, "Button 2");

  var w3 is new window ('dialogue');.

  w3 .add ('button', undefined, '3');

  myPrinter.onClick = function() {}

  W2. Show();

  }

  w3.onclick = function() {}

  w3. Show();

  }

  w.Show ();

  var w2 is new window ('dialogue');.

  W2 .add ("button", undefined, "Button 2"); ///<=>

  var w3 is new window ('dialogue');.

  w3 .add ('button', undefined, '3');

  myPrinter.onClick = function() {}

  W2. Show();

  }

  w3.onclick = function() {/ / /}<= and="">

  w3. Show();

  }

  w.Show ();

  Hi, your code is not indicated Button2,

  var button2 = w2 .add ("button", undefined, "Button 2");
  

  Set variable and

  button2.onClick = function() {...}
  

  OR

  w2 .add ("button", undefined, "Button 2", {name: "Button 2"});
  

  set the item "button 2" name and appeal ".

  w2['Button 2'].onClick = function() {...}
  

  Thank you

• Lost the user interface in Premiere Pro?

  A few weeks ago I signed up for creative cloud. I started using the first Pro CC. I knew that I couldn't take advantage of the Mercury engine because I have ATI Radeon HD 4870 512 MB. I was still able to edit and work. Today I went to send timeline to grade speed and it took forever to export, finally to halfway to send it, I gave up and revived Premiere Pro. When the first opened my UI had disappeared. Drop-down menus have all their but disappeared from the user interface. If I went in create new title, I could see that window, but the chronology, garbage, source and windows Records were not visible. I know that the sequence is always there because if I hit the space bar the sequence plays through my Kona card. I closed the first and I got a pop up menu Nvidia Cuda ask my update of drivers. It's strange because I have a card ATI not a Nvidia card. If I open all the other apps After Effects or Photoshop, all of the user interface is here. What gives?

  My specs: CPU 2 x 2.26 GHz Quad - Core Intel Xeon,.

  12 GB 1066 MHz DDR3 ECC memory.

  ATI Radeon HD 4870 512 MB graphics card

  AJA Kona IO Card

  Ann Merci for the info, Ann. However I realized that it was just that the interface was dragged all the way upward under the white bar that says first projects.

  When I saw the arrow pointing down I realized that I had to just drag the interface down. Simple mistake. Thanks again.

  Patch

• To access the check boxes in the user interface programmatically

  Hi all
  I have the following usecase.
  1. I have a table that has 3 columns, first two columns are read only output of the label component and the third column is a checkbox.
  2. I have three lines in the table.
  
  Now:
  1. when a user selects the check box and click on a "submit" button I want to check that it should have selected at least one checkbox.
  2. for which I tried to access the table from the user interface programmatically, but it does not work.
  Is there a way I can access the values?
  
  Thanks in advance,

  Hello

  The box must be bound to an attribute line in the table is related to data collection. If yes then simply loop through the lines and check if the attribute has been set. For example, if each line has a "checked" property, so you can ensure at least a line "checked = true' in your action. To access the collection, you can use something like:

  Object initialRowKey = table.getRowKey();
  try
  {
      int count = table.getRowCount();
      for (int i = 0; i < count; i++)
      {
          table.setRowIndex(i);
          MyObject row = (MyObject)table.getRowData();
          if (row.isChecked())
          {
              // do something, set a flag to true, etc.
          }
      }
  }
  finally
  {
      table.setRowKey(initialRowKey);
  }
  

  The code above assume that you linked the table to your managed bean using the "required" attribute in the table.

  Kind regards

  ~ Simon

• Is it possible to add a hard drive to a VM running via a script or a program without using the user interface

  I'll try to ask this question clearly, but I ask that read you it carefully, because I can't do a great job of setting out clearly what I'm looking for.

  I know how to create a virtual disk in a batch file or a script.  I know how to have a running virtual machine to detect a newly added hard drive and format it in Linux, BACK, and NetWare. I do not have scripted this part, but I did it manually by adding records via the UI and then by doing the steps manually to make the operating system to detect and format the newly added drive. In each case, these steps are scriptable with the exception of the addition of the drive in the user interface.

  The only way I know to add a new hard disk to a virtual computer running is through the user interface. I don't know in a way that can contain script (for example vmrun or an API call) to make.

  I guess that maybe I can have the virtual machine to go into sleep mode and then add the HDD in the vmx file while the machine is in standby mode, then put the computer to sleep mode, although I have not tested this.

  My question is, ' can a virtual drive be added to a virtual machine running without using the user interface and without put the machine to sleep, or in other words in a script any?

  Have you tried VI SDK?

• How to upgrade to the user interface of a screen that is extracted from the stack?

  Hello

  I am currently having a problem in the UI update.

  I have two screens called 'OverviewScreen' & 'DetailScreen' and in the upper part of the two screens, I have three buttons

  (i) back

  (II) next

  (III) charging

  In the entry of the app normally I posted the 'OverviewScreen' and in this screen, back, next buttons are inactive positions (just to have two sets of images, one active and one for idle) and if the user clicks on an item that is displayed in the cell, then I'll navigate the user to the "DetailScreen".

  Now the stack should have two screens,

  at the bottom - "OverviewScreen".

  at the top - "DetailScreen".

  and in the "DetailScreen" - I showed the image is active for the "back" button (because the screen is lower in the stack) and for the next inactive button image.

  Now if the user clicks the back button I navigates to the "OverviewScreen" which is called the UiApplication.getUiApplication (.getActiveScreen) (m:System.NET.Sockets.Socket.close ()); in the case of touch

  Now the "OverviewScreen" located in the bottom of the stack to the front UI (basically when I built it for the first time, it contains inactive images next and back) - what I want here is I need to show the following active image therefore needs to update the user interface of the screen that displays battery

  Because,

  OverviewScreen (back, next inactive images)--> DetailScreen (back - active, next - inactive)--> new OverviewScreen (should show the back - off, next - active)

  For this, I tried with what follows, but none works,

  If (event.getEvent () == TouchEvent.CLICK) {}
  UiApplication.getUiApplication () .getActiveScreen () .getScreenBelow () .updateDisplay ();
  UiApplication.getUiApplication () .getActiveScreen () m:System.NET.Sockets.Socket.close ();
  Returns true;
  }

  I even tried with invalidate() and dopaint() but none works

  However, I realized the functionality if I press the off button in the "OverviewScreen" he navigated me to the "DetailScreen", juice wants to show the icon active next button?

  What should I do to repaint or update the user interface of the screen here?

  Thanks in advance,

  Kitty.

  Found a solution

  Override the method which is found in the net.rim.device.api.ui.container.MainScreen and in this method, I have changed the image for the button and this method is called in the current active screen using getActiveScreen () .getScreenBelow)

• Model of spectator in the user interface

  Hello

  Is there a way that I could extract screenshots from the Model Viewer that you want to include in my UI dynamically?

  Thank you

  I have seen this command while searching for answers, but I, I'm not sure that it is a reliable operation.

  Fix. This is an undocumented feature, so not supported by Adobe. This means that it could easily disappear from ExtendScript, or change with a future update without warning. I use it a lot for my own non-public scripts and it works very well as long as you're only dealing with 8 and 16-bit projects. 32 bit breaks the appearance of the image and is unusable. Dan is correct while saving the image in this way might be a backdoor to do what you are wanting. You could also look at a cap screen command line option, but that would of course include each of the user interface and if the user had several monitors, several images to sort, so probably not a good idea.

• a reminder of the user interface will have a function with arguments?

  some ScriptUI quirks... I have a function (cut in this example) that I can call very well by itself of the extendScript window or if I set directly to the onClick callback, but when I try and call the function from a reminder and analyze arguments, the onClick is not working and the service runs once when the script runs first? what I am doing wrong?

  It works using the extend script window

  Nudge (23,77)

  
  

  function nudge (offset, distance) {}

  var L = app.project.activeItem.selectedLayers [0];

  L.startTime = (shift * distance);

  Alert ("Done")
  

  }

  This works when the button is clicked in the user interface

  
  

  myButton.onClick = function() {

  var L = app.project.activeItem.selectedLayers [0];

  L.startTime = (23 * 77);

  alert("done")

  }

  This also works when the button is clicked in the user interface

  
  

  myButton.onClick = boost

  
  

  function nudge() {

  var L = app.project.activeItem.selectedLayers [0];

  L.startTime = (23 * 77);

  alert("done")

  }

  but when I try and pass arguments (kind of functions) that does not

  
  

  myButton.onClick = nudge (23,77)

  
  

  function nudge (offset, distance) {}

  var L = app.project.activeItem.selectedLayers [0];

  L.startTime = (shift * distance);

  Alert ("Done")
  

  }

  OK, in the case where someone is interested... the solution with the permission of Mr. Lloyd Alvarez is to nest the function in another function call, why, I have no idea, but it works a treat...

  myButton.onClick = function() {nudge (23,77)}

  function nudge (offset, distance) {}

  var L = app.project.activeItem.selectedLayers [0];

  L.startTime = (shift * distance);

  Alert ("Done")

  }

• Display name instead of the ID in the user interface

  Hello
  
  I have the script below to implement. Please see the description below:
  
  __table 1__
  
  ID name
  1 ABC
  2 XYZ
  
  
  Table 2
  
  Tabe1ID col1, col2
  1 Col1value1 col2value1
  2 Col1value2 col2value2
  
  Table1ID column corresponding to the foreign key from table1.
  
  I show data from Table2 in the user interface. while displaying the data in the UI instead of the value of the column Table1ID, I need to display the values of corresponding name column in table1.
  
  that is my view of the user interface should look like below:
  
  Tabe1ID Col1, Col2
  ABC Col1value1 Col2value1
  XYZ Col1value2 Col2value2
  
  could if it you please let me know how I can achieve this in ADF?
  
  Thanks in advance.
  
  Published by: user8673275 on December 12, 2012 06:27

  What version of Jdeveloper? Since you are new to the forums... Please read this before posting so that we can help best-
  https://forums.Oracle.com/forums/Ann.jspa?annID=56

  If you use ADF BC, you can create a VO with a join between the table 1 & table 2 exposing all the fields.
  Then you can drag and drop the original Version as an array of attributes required on the user interface.

  This should focus on what I said - the name instead of id

• What should I use to create the user interface of a CEAP plugin on mac

  Hey there,

  I'm new to the development of a plugin, but I did development of script for quite a long time however. I'm tring to develop an ECAP plugin. I go to the sample project of "Panelator" (from AE CC SDK), but I don't know how to create ui for the control panel plugin stuff.

  The sample project is not an example of code to do this on a mac computer, I found the code examle for windows however.

  So, can someone generously tell me how? I had to do with cocoa? But as I understand it, I can only use Objective-C to write cocoa ui.

  Thank you very much!!!

  Hi Li Zhiqing,

  We have just announced in the next major update to AE CC signs HTML5 is supported:

  http://blogs.Adobe.com/AfterEffects/2014/04/new-changed-after-effects-CC-2014.html

  This will allow to create the user interface using HTML5 and use your scripts for the conduct of AE.  It is quite a bit easier than the use of cocoa for the construction of the UI panel.  Thoughts?

• Offset of the user interface after update of El Capitan

  Hello. Since I upgraded my Macbook Pro late 2013 to El Capitan retina, I've known GAL of the user in function, mainly opening animation of safari and switching between desktop computers. These issues are only to make my user base, I created a test user and concluded that the test user was not the offset of the user interface. I have reinstalled the operating system, as well as talked to apple. Apple had me reset the Pram so that delete files, including:

  / Library/LaunchAgents

  ~/Library/LibraryAgents

  / Library/LaunchDaemons

  / Library/Caches

  ~/Library/caches

  and many other files like these.

  None of that helped, my UI lag is still there and fine. Also, I'm not sure if this is relevant; However, my recovery HD (available from start by pressing the alt/option key) is not an option. I'm not sure if the files I deleted with apple support caused it or reinstalling the operating system has done this. IM thinking delete files because I reinstalled the operating system using the HD recovery.

  Does anyone know how to fix the lag in the UI? I know other people have this problem, google search and this forum but no clear answer has not developed.

  Thank you

  Caulin Bloom

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.