Script of the user interface

Similar Questions

• Scripts from the user interface.

  I am trying to create a script that generates a window and fills with icons pre-made depending on how

  documents are opened in Photoshop. then, depending on which icon is clicked, it stacks the files in a certain way.

  My question is, if I fill the window with the image buttons, which are placed there by a switch, should I put the onClick within the

  spend according to each case?  or do I have to put it out after the window shows?

  If you create image buttons, you must put the onClick where you create them--inside the switch, otherwise you will onClick functions that don't relate to anything and will throw an error - if I understand what you are doing.

• Is it possible to add a hard drive to a VM running via a script or a program without using the user interface

  I'll try to ask this question clearly, but I ask that read you it carefully, because I can't do a great job of setting out clearly what I'm looking for.

  I know how to create a virtual disk in a batch file or a script.  I know how to have a running virtual machine to detect a newly added hard drive and format it in Linux, BACK, and NetWare. I do not have scripted this part, but I did it manually by adding records via the UI and then by doing the steps manually to make the operating system to detect and format the newly added drive. In each case, these steps are scriptable with the exception of the addition of the drive in the user interface.

  The only way I know to add a new hard disk to a virtual computer running is through the user interface. I don't know in a way that can contain script (for example vmrun or an API call) to make.

  I guess that maybe I can have the virtual machine to go into sleep mode and then add the HDD in the vmx file while the machine is in standby mode, then put the computer to sleep mode, although I have not tested this.

  My question is, ' can a virtual drive be added to a virtual machine running without using the user interface and without put the machine to sleep, or in other words in a script any?

  Have you tried VI SDK?

• Is FDMEE runing through the user interface or batch process?

  In an event of jython script, how can I determine if the FDMEE process is run through the user interface or as part of a batch?

  Use the method getBatchJobDetails (BigDecimal pLoadId) API, if it returns a result set, then there a batch process, if it is not it is not.

• Model of spectator in the user interface

  Hello

  Is there a way that I could extract screenshots from the Model Viewer that you want to include in my UI dynamically?

  Thank you

  I have seen this command while searching for answers, but I, I'm not sure that it is a reliable operation.

  Fix. This is an undocumented feature, so not supported by Adobe. This means that it could easily disappear from ExtendScript, or change with a future update without warning. I use it a lot for my own non-public scripts and it works very well as long as you're only dealing with 8 and 16-bit projects. 32 bit breaks the appearance of the image and is unusable. Dan is correct while saving the image in this way might be a backdoor to do what you are wanting. You could also look at a cap screen command line option, but that would of course include each of the user interface and if the user had several monitors, several images to sort, so probably not a good idea.

• a reminder of the user interface will have a function with arguments?

  some ScriptUI quirks... I have a function (cut in this example) that I can call very well by itself of the extendScript window or if I set directly to the onClick callback, but when I try and call the function from a reminder and analyze arguments, the onClick is not working and the service runs once when the script runs first? what I am doing wrong?

  It works using the extend script window

  Nudge (23,77)

  
  

  function nudge (offset, distance) {}

  var L = app.project.activeItem.selectedLayers [0];

  L.startTime = (shift * distance);

  Alert ("Done")
  

  }

  This works when the button is clicked in the user interface

  
  

  myButton.onClick = function() {

  var L = app.project.activeItem.selectedLayers [0];

  L.startTime = (23 * 77);

  alert("done")

  }

  This also works when the button is clicked in the user interface

  
  

  myButton.onClick = boost

  
  

  function nudge() {

  var L = app.project.activeItem.selectedLayers [0];

  L.startTime = (23 * 77);

  alert("done")

  }

  but when I try and pass arguments (kind of functions) that does not

  
  

  myButton.onClick = nudge (23,77)

  
  

  function nudge (offset, distance) {}

  var L = app.project.activeItem.selectedLayers [0];

  L.startTime = (shift * distance);

  Alert ("Done")
  

  }

  OK, in the case where someone is interested... the solution with the permission of Mr. Lloyd Alvarez is to nest the function in another function call, why, I have no idea, but it works a treat...

  myButton.onClick = function() {nudge (23,77)}

  function nudge (offset, distance) {}

  var L = app.project.activeItem.selectedLayers [0];

  L.startTime = (shift * distance);

  Alert ("Done")

  }

• Display name instead of the ID in the user interface

  Hello
  
  I have the script below to implement. Please see the description below:
  
  __table 1__
  
  ID name
  1 ABC
  2 XYZ
  
  
  Table 2
  
  Tabe1ID col1, col2
  1 Col1value1 col2value1
  2 Col1value2 col2value2
  
  Table1ID column corresponding to the foreign key from table1.
  
  I show data from Table2 in the user interface. while displaying the data in the UI instead of the value of the column Table1ID, I need to display the values of corresponding name column in table1.
  
  that is my view of the user interface should look like below:
  
  Tabe1ID Col1, Col2
  ABC Col1value1 Col2value1
  XYZ Col1value2 Col2value2
  
  could if it you please let me know how I can achieve this in ADF?
  
  Thanks in advance.
  
  Published by: user8673275 on December 12, 2012 06:27

  What version of Jdeveloper? Since you are new to the forums... Please read this before posting so that we can help best-
  https://forums.Oracle.com/forums/Ann.jspa?annID=56

  If you use ADF BC, you can create a VO with a join between the table 1 & table 2 exposing all the fields.
  Then you can drag and drop the original Version as an array of attributes required on the user interface.

  This should focus on what I said - the name instead of id

• What should I use to create the user interface of a CEAP plugin on mac

  Hey there,

  I'm new to the development of a plugin, but I did development of script for quite a long time however. I'm tring to develop an ECAP plugin. I go to the sample project of "Panelator" (from AE CC SDK), but I don't know how to create ui for the control panel plugin stuff.

  The sample project is not an example of code to do this on a mac computer, I found the code examle for windows however.

  So, can someone generously tell me how? I had to do with cocoa? But as I understand it, I can only use Objective-C to write cocoa ui.

  Thank you very much!!!

  Hi Li Zhiqing,

  We have just announced in the next major update to AE CC signs HTML5 is supported:

  http://blogs.Adobe.com/AfterEffects/2014/04/new-changed-after-effects-CC-2014.html

  This will allow to create the user interface using HTML5 and use your scripts for the conduct of AE.  It is quite a bit easier than the use of cocoa for the construction of the UI panel.  Thoughts?

• How to design the user interface of Indesign plugin cs6?

  Design of UI to the custom help c ++ library (SDK) for pluging is a work very tedious .so when I search on the net I found that we can do to help Adobe Creative Suite Extension Builder but I don't know how to use it to develop the user interface for the plugin and how to enable the management of events in this UI. I read a lot of document about it on the net, but they have all created a lot of confusion in my mind if someone can help me to know the steps I have to follow to develop the plugin using the this or whatever technology (action script, JavaScript etc)

  If you want to develop using Creative Suite Extension builder Extensions so I think that this is not the right forum for you. Thanks for posting your specific queries on the below mentioned link hotel

  http://forums.Adobe.com/community/creativesuites/cs_sdk

  To give a brief of how to develop the interface using JS ScriptUI user allows you to develop your user interface, it's a quick and an OS-independent approach to the development of the user interface. The user interface created using JS comes next. You can see the following link for more help on ScriptUI

  http://www.kahrel.plus.com/InDesign/scriptui.html

  I did not much info about the development of the CS SDK, but I can point you to one direction more than the dev called hybrid plugins that the user interface is created in CS SDK and appropriate methods are exposed plugin C++ (improve the script object model) to be called by the code CS for too and for communication between these two modules of code.

  Hope these pointer help you get started.

  Thank you

  -Manan

• Offset of the user interface after update of El Capitan

  Hello. Since I upgraded my Macbook Pro late 2013 to El Capitan retina, I've known GAL of the user in function, mainly opening animation of safari and switching between desktop computers. These issues are only to make my user base, I created a test user and concluded that the test user was not the offset of the user interface. I have reinstalled the operating system, as well as talked to apple. Apple had me reset the Pram so that delete files, including:

  / Library/LaunchAgents

  ~/Library/LibraryAgents

  / Library/LaunchDaemons

  / Library/Caches

  ~/Library/caches

  and many other files like these.

  None of that helped, my UI lag is still there and fine. Also, I'm not sure if this is relevant; However, my recovery HD (available from start by pressing the alt/option key) is not an option. I'm not sure if the files I deleted with apple support caused it or reinstalling the operating system has done this. IM thinking delete files because I reinstalled the operating system using the HD recovery.

  Does anyone know how to fix the lag in the UI? I know other people have this problem, google search and this forum but no clear answer has not developed.

  Thank you

  Caulin Bloom

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• WIN8 registers touch but no reaction from the user interface?

  Anyone having problems with Win8 button when your fingers are clearly registered (Windows gives this feedback from the spherical ripple effect) but the user interface under your finger does nothing? No not the button and so on.

  I live it with some Chrome for example, with the small button tab when it is near the top edge of the screen.

  If I drag the window to the center of the screen, I have no problem with getting keys recorded. Hit the button new little tab gives no trouble.

  When user interface elements are close to the edge, no reaction, even if the wave indicator appears.

  Cannot know if it is a driver or a HW problem. I use X220T.

  Example screenshot

  May be a problem with Chrome, in fact. Tried with Firefox and the new tab button is a lot easier to hit. ---> will give Chrome devs a hint

  EDIT: what you know! The new beta version has already dealt with this issue:

  https://www.Google.com/chrome/browser/beta.html

• Flatten to a string to send arbitrary objects by messages from the user interface?

  Hi people,

  I am trying to send arbitrary data by messages from the user interface defined by the user to my labview interface. Something funny happens then: if I send the data through the message of ui, it seems I have something strange. There is only one character or nothing in the message of the user interface that reached my reminder.

  It seems that flatten channel also creates control characters that are interpreted by NI TestStand and Labview not as members of the chain, and for this reason I only get incomplete data. within the action of testand, which creates the flattened data, I put a dialog box to display the string data, and it seems that at least up to 255 (ascii) characters are used.

  Is there something like uuencode/uudecode to avoid this problem?

  Thanks in advance

  Okidoki, found.

  His «binary"produced by «Flatten the string» string Apparently I thought, the LabVIEW data type is incompatible with the API of TestStand from LabVIEW. In conclusion I would classify this as a bug (sorry people, at least there should be documentation) API for LabVIEW TestStand 2014.

  As a solution, I use flatten it in XML, which is a printable and human readable 'normal' string.

  It was trial and error, and I'm not enjoying this.

• How to get TS::SequenceContextPtr to customize the user interface

  I want the file of the custom, user interface sequence value therefore need to take stock of the TS:equenceContextPtr, anyone know how to get this point.

  Is there a reason that UIMessages are not enough?

  Just off the top of my head, here are a few concerns with the not not using UIMessages:

  1. How the user interface is unknown when the file of the sequence is developed to set the value.  Without an event or some sort of synchronization you can do exactly that.  UIMessages not only to ensure the right information, but they help also with synchronization.
  
  
  2. The engine does not know this information, and view of execution manager knows that the information for the current execution it is linked to (which changes throughout the life of a series of tests).  Basically, recall of front end, model, and other factors may spawn short executions briefly related to the Manager view of execution.  So if you take the context of the sequence of the current run is perhaps not the right one.
  
  
  3. Writing a user interface will be couple the user interface to your specific sequence file.  At this point, you can use the network variables or global variables or global queues as well.  It might even be better options.

  The situation you describe is exactly why the UIMessages were created.  Maybe you can help me understand why you are set on the use of pointers, you already have?  There might be a better solution for your case if I'm misunderstanding you.

  Thank you

• Why me disables the user interface click on another button, while it performs a scan?

  Hello

  When I run the user interface and click on a button that is sweeping the voltage for a period of time, I can't press any other button that sits on my Panel, lets say the Abort button that would prevent the action.

  So when I take the data and I realize that I should stop him before he finishes the scan, I can't and it's a really bad drawback.

  How can I improve this problem?

  Thank you

  Hi m.s.taba,

  It seems to me that your code runs the function leave but does not exit the loop you are, then the program stops at the end of the loop.

  To avoid this, you can:

  • use a global variable to the time your long recall and the recall of quit smoking
  • Call ProcessSytemEvents in the loop
  • reminder for the button leave defines the global variable
  • inside the loop, immediately after ProcessSystemEvents, you should test the value of the variable, and if the value you must break out of the loop
  • only after the exit of the loop, you can complete your program

• How to get an array of integers to user in the User Interface

  Hi all. I'm not a very experienced user of the CVI. I have almost exclusively coding in LabVIEW but have a client who wants all of their work in the CVI.

  I've been very fruitful so far (set up a Modbus API from scratch that supports all types of connection) but am confused on how I can get the integer multiples of the user without limiting the number of integers I can get. Essentially, I need to be able to get an array of integers to the user.

  General information, I am building a user interface to test my Modbus API. There are Modbus functions to 'Write multiple registers' and 'write multiple coils. I want the user to be able to enter all the values they want to write in one command.

  What is the best way to get an array of integers through the user interface?

  The easiest way is probably to allow user input in a textbox control numbers: items can be separated by spaces, commas, or even a line break (using ctrl + Enter). You will then need to extract the string from the TextBox and analyzed for numeric values using any non-digit character as a separator: strspn (string, '0123456789'); can be used for this.

  More complex, another possibility is to use a table control to receive user input: you Dresses an empty table with a reasonable number of roews, or you need some codes to add new lines as long as the user fills all those already existing. On the other hand, it will be easier since data recovery in a simple statement, you will all return values: GetTableCellRangeVals (panelHandle, PANEL_TABLE, VAL_TABLE_COLUMN_RANGE (1), table, VAL_COLUMN_MAJOR);