SD / another card reader has an eject option

Similar Questions

• Strange problem with on my Satellite A200-1 SD card reader has 9 & A100-338

  I have two Toshiba laptops, one for work (A200-1 to 9) the other for home (A100-338), both have the same problem with the reading of the internal reader SD cards.

  Most of the time when I insert an SD card (256 MB, 512 MB, 2 GB of varying sizes) laptops require the driver disks. It's VERY frustrating because the readers are standard build within these models. What makes this worse is the fact that every now and then, there is a map that can be read by both machines. If you read on one, he reads on the other always the same cards never changes. By so if the drive IS able to read SD cards without a driver, why is that it requires drivers for others. Drivers that are not provided, do not seem to exist and altermately mean that I can't use these cards.

  I just don't understand why there is a problem.

  There must be an answer out there, I hope someone reading this Post knows and is ready to share. Thank you!

  Hi guys

  -First check in the user manual which cards are supported! The cards can be used!

  -If you use Vista and have some issues with the SD card reader please check this Microsoft Knowledgebase document:
  http://support.Microsoft.com/?kbid=936825

  -In addition, the information that there is no SD card driver is completely false!
  On the European driver Toshiba page, you will find the Flash Media Driver. This is the driver for your bridge Media Slot. This slot allows you to insert an SD card, Memory Stick (Pro) or xD picture cards.
  In addition, you will find the Support of Flash memory card utility. This allows your computers to Flash card slots.

• Integrated card reader has stopped working.

  I have a Dell Inspiron 530 s with Vista Home Premium. The integrated card reader stopped working after I removed a SanDisk Extreme 16 GB microSD card. Readers have been H, J, K and L.

  I tried: restart. Uninstall the device drive and reboot and let windows detect the driver.

  Even after reboot several times, and my own research I do not find the readers anywhere.

  I also looked under disk management, and it does not appear.

  I don't know what else to try. Any suggestions?

  Thank you

  Jinn

  Try the Fixit http://support.microsoft.com/mats/hardware_device_problems/

• INTERAL card reader has not detected SD card on Media center m7160n Windows 7

  Hello everyone I hope that everyone is doing well unfortunately im not.

  IM extremely frustrated and I don't know what else to try.

  I advanced and installed windows 7 ultimate on a HP Media center PC m7160n on 1 GB ram

  He worked like wonders she even supports aero. What did eal very well until I tested the 9 in 1 card reader internal

  He just did not detect SD cards

  On my device manager, I see no warning anywhere and my drives F, G, H, I are listed as the "yellow" driver laptop drivers

  When I insert USBs automatic playback is fine but when I insert the SD card, nothing comes

  Any ideas?  It worked fine in XP

  Does windows 7 assigned the wrong drivers for the card reader? any advice would be extremely helpful

  I'm going to try the activation of the card chip on services.msc

  Also, sorry if this is in the wrong place.

  Thank you!

  I had a similar problem with a card on a hpe 130f reader. It turned out to be a faulty card reader.

• smart card reader has stopped responding on my hp Pavilion

  Help, please

  Hi Albert,

  Download and install the hotfix from the link below and see if it helps.

  A computer that has compatible smart card logon stops responding after that you remove and then re-insert a smart card in Windows 7, Windows Vista, Windows Server 2008 or Windows Server 2008 R2

  Good day!

  Just reply to us if you have any questions.

• HP ENVY h8 - 1437c card reader

  I have a desktop HP Envy. Great computer but the card reader has been horrible since I got the computer: often think that I have just inserted the SD chip is read-only. After traction and plug several times it will be miraculously let me add new files, etc.

  So I'll just replace it. I just need to know what to replace it with.

  Ideas?

  Thank you!

  Hello

  Part number: 644491-001 as shown:

  http://PartSurfer.HP.com/search.aspx?SearchText=H4A10AA

  You may wat to bookmark the link above for future reference. You can buy in the store or

  http://www.Amazon.com/HP-644491-001-card-reader-USB2-0/DP/B008L30GA2

  Another option:

  http://www.OfficeWorks.com.au/shop/OfficeWorks/c/technology/data-storage/card-readers

  Kind regards.

• SD card reader does not.

  My NC6320 has a card reader for SD-MS/PRO forward. MMC SM. XD cards.

  OS = XP Pro + SP3

  It seems not work when an SD card is inserted as nothing presents itself as a "disk of abduction" as if when I insert a USB external hard drive or flash drive.

  What advice it to check if it works or any software or drivers necessary. And where in the devices.

  Thank you

  HP 2000-2a20CA, running Windows 10 laptop

  @Paul

  Hello

  You can see the solution below.

  Uninstall your current driver for the card reader Texas.

  Now install the Texas Instruments Driver sp38607 ver 2.0.0.8 card reader has

  Note:

  If there is not any option for standard uninstalation then download the current print driver installation file and run it.

  You should see options to uninstall the driver.

• SD card reader will not work (code 10) on Portege

  Problems with my toshiba portege.

  When I put a card in the reader, plug n play sound just so he recognizes her. but then, nothing appears, something about an error code 10 showing he cannot start.

  is it possible to fix it?

  Code 10 means generally impossible to start the device.
  This may have different reasons. First, the driver has not been installed correctly or there is something wrong with the hardware.

  What you can do is refreshing to the SD card driver.
  Please go to Device Manager, check the State of SD card reader and use the option Update or reinstall the driver.
  The driver must be placed on the page Web of Toshiba. I hope. :|

  Alternatively, you can remove this device from the Device Manager, and after that restart the CD device should be recognized again.

• No detectable T520 SD card reader after upgrade Windows 8.1

  My SD card reader has become non-functional after a recent upgrade of my T520 to Windows 8.1. Hardware troubleshooting, said that the Base system device driver has not been installed. I installed the Lenovo system update software and looked for updates, but the driver was not updated. There is always a symbol of yellow warning next to the Base system device in Device Manager. Discovered on the site of driver download Lenovo that the card reader in my model is the Ricoh card reader, but there is no driver compatible with Windows 8.1. The driver for Windows 8 would work or is there another solution to get my player to run?

  Hi DiannaW,

  You can try to install the windows driver 8 for your system and see if it works.

  Or you can try to install the driver windows 8.1 for the T530. (64-bit only version)

  http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS038445

  One of the two should work.

  Vince.

• My Cac card reader worked for a week and now the computer is not recoginize... told me that it is not connected?

  I installed the drivers and the correct software.  My computer has accepted the CAC card and it worked fine for about a week.  I tried to use today and the computer does not even recognize the card CAC reader was plugged.  I käpt asking me to ensure a card reader has been sonnected.  I tried to run a repair on the software, but that doesn't seem to help.  I rebooted the computer several times and even tried other card readers.  I could use some help.

  Hello

  1. what operating system do you use?

  2 did you change on your computer?

  3. did you check the card reader with another computer?

  4. you use external USB card reader or the card reader integrated?

  I suggest you to follow the steps and check

  Step 01:

  I suggest you follow the steps from the link below.

  a. click Start, click Control Panel.

  b. click on system and security.

  c. click System, click Device Manager in the left pane.

  d. click the adapter card reader device, right-click on the adapter.

  e. tab driver , click Uninstal.

  f. click ok when you are prompted.

  g. now, go back to Device Manager and click Scan for hardware drivers.

  It automatically detects the drivers.

  Note: If the drivers are not found, then I suggest you to download the new drivers from the manufacturer's website.

  Step 2:

  I recommend you to update the drivers and see if it makes a difference. You must be logged on as administrator to perform these steps.

  a. open the Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) in Device Manager, look for the device and then double-click the device name.

  c. click on the driver tab, then click on set to update driver and follow the instructions.

  See also: hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

• WPD file system volume driver, card reader, code 10

  Used to have a Vista system to windows 7 update on top and the card reader has worked without any problems, in fact a full install of windows 7, the card reader appears four times (once for each location in the card reader) 'device cant start code 10' 'WPD file system volume driver. " If for example, I put a Memory stick card in the slot, he then shows up in my computer as a drive can be used to read and write from.

  The external USB card reader that I keep with my camera also has the same problem. This works perfectly on XP and Vista on this PC, the internal card reader used to be in this PC also worked great on XP and Vista as well as Windows 7 which has been installed on top of Vista.

  I checked for new drivers for the new card reader, are none for Windows 7, so there should not be any question here.

  Looks like I solved, went into computer management, the Manager disk and found that they were not in fact assigned to the card reader drive letters. Seed it when the media was designed, windows a drive letter assigned automatically, once the media was ejected from the letter assigned was swept away, this caused the WPD 10 error, so I manually set a drive letter for each location on the card reader all errors are now gone.

• Card reader memory O2Micro on Latitude with Windows 8.1

  I have a Latitude E5520 and a Lattitude E5530, have both the O2Micro SD memory card reader.  The drive worked fine in Windows 8, but after I installed the 8.1 update, the SD card reader works not at all when you insert a memory card.  There is no beep, no hard drive available in Windows Explorer, and in the device, the O2 Manager is not listed in "Storage controllers", where it should be.

  There are two versions of the driver that I found online on the Dell site, but neither one solves the problem.

  I've found this workaround, but it's not a very good:

  • 8.1 Windows, press the Start button and type peripheral difficultyand click on find and fix problems with the devices in the list of results.
  • Click Next and let it check for problems.  He will come with the option to activate the device Intel 6 series/C200 Series Chipset Family PCI Express Root Port 6 - 1C1A or something similar
  • Click apply this hotfix
  • Once completed, close the troubleshooter and open up Windows Explorer and you should see the card reader
  • In Device Manager, you should see Controller O2Micro Integrated MMC/SD controller O2Micro integrated MS/MSPRO

  Now here's the bad news – once you reboot, or even go to sleep and come back, the card reader has disappeared, and you must repeat these steps.

  If anyone has a permanent solution, I would like to know what it is!

  -Dave

  I had the same problem with my guitarfish E5430 and thank you for your thing!

  But I finally found the right driver and now everything seems to work fine, here's what I did:

  -Go to the Dell driver site

  -Tick: All drivers for your product

  -Choose: MS Windows 8.1 64-bit

  -Come on in: storage controller

  -Installation: O2Micro Smartcard (driver O2Micro OZ77CR6 smart card)

• Software problem or SIM card reader?

  Hello

  My brother just bought a new iPhone SE. Like his old iPhone 4 was unnecessary, he gave it to me.

  He has deleted all the data, so it was a whole new iPhone 4 running under 7.1.2

  Unfortunately, that he used a nano SIM with an adapter and when he took the set, things were not going smoothly and he shot it too strong, maybe because the tray was blocked...

  in any case when I turned on the phone with my SIM card (same provider that he bought the phone of) it keeps saying "no sim". I was unable to activate the phone.

  I launched iTunes, plugged the iPhone: 'no SIM '.

  I tried my SIM own brother who worked before the reset (and also before this 'incident' tray) and it was exactly the same situation.

  Then I also tried DFU restore the phone with iTunes, but it was useless.

  So I'm pretty sure that the SIM card reader has been damaged. But I still hope that this situation might be link to a software problem.

  How can I be sure that the phone detects no SIM card. (I won't call an emergency...)

  Thank you very much! It would have been my first smartphone

  Sounds like a problem of material for me. I doubt it's worth the money to get that repaired, although the phone.

• Tecra M5 - SD card reader works with the factory settings

  Hi all
  My SD card reader has been in place. It will read a few cards of 4 GB and won't read other (usually newer).
  All cards in this problem area are Transcend cards 4GB SD (HC or whatever the format more later is)
  The cards, the M5 will not read can be read both my PDA, but also an old Tecra 9000 (who will also tell the other 4 GB cards)

  The PC was recently engineers have a problem so I asked to look at this problem. They reported that it was a software problem, because if they load the recovery CD (that is, to bring the machine to factory State) the SD card reader reads cards problem OK; Back to my setup and the SD card reader can not read cards SD - error message is "the request cannot be performed because of an i/o device error."

  So I guess that I need new drivers. Very well except that it has no drivers for the drive SD card itself. Its a part of the motherboard. There is a 'secure module SD' on the download from Toshiba site and I downloaded and installed the SD Secure module (dated 2008)
  However, Device Manager still shows that the SD host controller driver is Microsoft version 01/10/2002 6.0.4069.5

  If anyone has ideas on how to fix

  TFA
  R

  Hello!

  > back to my setup and the SD card reader will not read SD cards
  Can you explain what you mean, please?

  I put t understand why you n t run factory if it s a software problem. I never had problems with the factory settings because then I can make you that all functions work properly on my laptop.

  Good bye

• CARD reader may not be detected for Toshiba Satellite A100 (PSAARE)

  Hi team,

  Please help, as I have Toshiba laptop with model Satellite A100 (PSAARE) which had Vista then I upgraded with Windows XP, now my all software works except the card reader which doesn't detect any card of same SD memmory so that the driver has been installed... Please sat down

  Are you certain that the card reader has installed the XP drivers (and they are the exact brand and model of player)?  This is an internal or external card reader?  I suggest that you check with Toshiba to make sure you have all the drivers, firmware, or software required for the card reader (it may just be a pilot - it may need more).  I would also re - download the driver and uninstall the old and reinstall a new where the original has been corrupted for some reason any.  Are you sure that even with the drivers, that this computer model can handle XP completely and that you are not a problem of compatibility (I contact Toshiba Technical Support and confirm what you've done is perfectly possible, including the card reader).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.