smart card reader has stopped responding on my hp Pavilion

Similar Questions

• Integrated card reader has stopped working.

  I have a Dell Inspiron 530 s with Vista Home Premium. The integrated card reader stopped working after I removed a SanDisk Extreme 16 GB microSD card. Readers have been H, J, K and L.

  I tried: restart. Uninstall the device drive and reboot and let windows detect the driver.

  Even after reboot several times, and my own research I do not find the readers anywhere.

  I also looked under disk management, and it does not appear.

  I don't know what else to try. Any suggestions?

  Thank you

  Jinn

  Try the Fixit http://support.microsoft.com/mats/hardware_device_problems/

• video card error message, "nvlddmkm.sys has stopped responding and has recovered."

  My computer has an nvidia 9800 gt. Since then, a week ago that I am unable to play a video game, or use windows media center. If I ever start a video game or windows media center the program crashes and I get the error message, "nvlddmkm.sys has stopped responding and has recovered." A few times, I get a message from the blue screen and the computer needs to restart. I reinstalled the drivers and even restored software from my computer to the original factory condition. A year ago I noticed my computer screen would get dark, as if I was wearing sunglasses. I want to restart my computer and the screen would be normal again. I was wondering if my video card burned to some, and if I need a new video card. The average temperature of my videocard 76 degrees Celsius, is 167 degrees Fahrenheit.

  Hello

  The best sources of information would be Nvidia Support, their documentation online and their
  forums. Try to remove ANY power and reseating the cables (both ends, memory and cards
  When possible) - in fact, remove and replace - do not just tight. Clean the dust bunnies
  and vents. Make sure that the internal fans are working and trying to use a small fan to blow
  directly into the inlet to see if that helps.

  NVIDIA - drivers - use OPTION 1 to manually enter your info driver to get the most recent drivers.
  http://www.nvidia.com/download/index.aspx?lang=en-us

  NVIDIA Support - check with the support that she might be a known issue
  http://www.nvidia.com/page/support.html

  NVIDIA forums - also check for the forums it might be a known issue or others likely to have
  http://forums.nvidia.com/

  ==============================================================

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• HP connection manager: Fatal Error, HP Connection Manager Service has stopped responding.

  Hey there,

  I have a very big problem with HP Connection Manager 4 on several Windows 7 laptops. The program is installed on about 250 laptop computers and some of them drive me crazy. Everything was fine until some point (I'm not quite sure, that could be after the installation of SP1, Win7), the connection manager has decided to stop working on some machines. Whenever I try to start it, it takes a long time to load until the following message is displayed:

  "HPConnectionManager.exe - fatal error '.

  HP Connection Manager service has stopped responding. Quit and restart the application.

  A fatal error occurred, check the HP connection manager in the event viewer for more details.

  Recovery of the factor of COM class for the component with CLSID {24DB46C8-C842-4E91-9AC4-8A9525A5551D} failed due to the following error 80080005. »

  I tried the following on one of these books:

  -Start the service manually: "Error 1067: the process terminated unexpectedly."

  -Msconfig: Removed any connection associated with Autostart Manager

  -Reinstall the HP connection manager

  -Repair HP Connection Manager

  -Reinstall .NET 3.5

  -Changed some regkeys

  -Install Microsoft Hotfix KB2519740 which is part of the system essential updates for Microsoft Windows 7 (that I can't download because there is a server error)

  More information:

  -(pour la plupart) HP Probook 6550 b

  -Windows 7 Enterprise 64-bit, SP1 (English and German MUI)

  -HP 4.1.22.1 Connection Manager

  The only thing that really works is to reinstall the laptop with the image with which we install all of them. HP connection manager is installed as a software later so I don't understand why a reinstall is successful.

  I'm really tired of this problem, and I have a few unhappy customers on my back, so if you have any suggestions for me, please help.

  Thanks in advance!

  You could try this on one machine that shows the issue and see if it helps:

  Relevant information:

  V4.4.10.1 Connection Manager

  Corrections in sp58930:
  -Fixes an issue where the setting of HP Connection Manager protocol PAP (Password Authentication) in the connection profile for Verizon LTE systems causes an authentication failure of network systems in some markets.
  -Fixes an issue where HP Connection Manager is not displayed in the configuration of the HP software.
  -Fixes an issue where event viewer displays an error in the HP Connection Manager once the system is restarted.
  -Fixes an issue where the HP Connection Manager displays the error message "SIM card is locked" when a PIN has been used successfully to unlock the SIM card.
  -Fixes an issue where the "Enter PUK" (Personal Unblocking Code) button does not appear in the HP connection manager when a SIM has been locked after the PIN code has been entered incorrectly.
  -Fixes an issue where the statutes of the wireless LAN and Bluetooth device not display correctly on the HP connection manager when Connection Manager is started while the wireless LAN and Bluetooth are turned on and connected.
  -Fixes an intermittent issue where network technology is incorrectly identified.
  -Fixes a problem that causes a HP connection manager to stop working and an error message is displayed.
  -Fixes an issue with the Spanish version.

  Prerequisites:
  • HP or Compaq machines only brand
  • Operating system is Windows XP or later
  • If the operating system is Windows XP, it must have installed SP3
  • Version of the .net framework 3.5 SP1 must be installed

  Improvements:
  -Supervises HP Support version 4.6.8.1

  Installation package:

  sp58930 Connection Manager V4.4.10.1

  =====================================================================================

  Hope that helps...

• AMD driver has stopped responding and successfully recovered

  Hi, I bought a new computer hp laptop (dv6-6024TX) and I always get the message "amd driver has stopped responding and successfully recovered" I don't get it when I alt tab of a graphic demanding game (Heroes Of Newerth).
  Record: core i7 2630qm
  4 GB of ram
  graphics ATI mobility radeon hd 6770
  700 GB HDD

  How can I solve this?

  OMG GUYS I THINK I FIXED IT!
  If you never play a high graphics demanding the game for example: Heroes of newerth/crysis 2, etc.
  change your windows theme to classic windows! It may seem ugly but who cares your cheek a game anyway.
  I read this off somewhere and I tested and so far no error! so happy, like my cell phone now:

• Problems of blackBerry Smartphones initialization of a 330 of SafeNet via the BlackBerry Smart Card Reader

  Hello

  I managed to use my PC BlackBerry smart card reader. Now, I am trying to initialize a smart card SafeNet 330 with SafeNet BSEC from the PC tool. But everything I do the initialization fails.

  Has anyone been initialized properly a card in this way by the BlackBerry smart card reader?

  I suspect a problem with the drive, why I'll try to find my Gemplus400 player and see if it works.

  Thank you

  Chris

  Using the player of Gemplus400 did the trick. Looks like the BlackBerry SCR reader stumbles on the configuration of the password during initialization of the as it does not define the label successfully.

• NVIDIA Windows Kernel Mode Driver, Version display driver (I tried three different versions) has stopped responding and has successfully recovered

  NVIDIA Windows Kernel Mode Driver, Version display driver (I tried three different versions) has stopped responding and has successfully recovered

  Hello
  I have an old 1255ee HP HDX 16, I tried everything to fix this, I tell EVERYTHING, but I have still the problem is the things that ive tried:
  1 reinstall the driver
  2 - fresh installation of the driver
  3-3 different versions of the driver
  Format 4-complete
  5. change of ram
  6 overclocking
  Question 7 - N ° heating/voltage
  8 - changed a few settings in the nvidia as control panel change my processor Physx auto to mine, Nvidia GeForce GT 130 M, adjusted image of quality, performance, management mode of power to prefer performance max.
  9 - went to performance of advanced system of control configuration\systeme setting option and Security\System and ive set it the best performance.
  The last of them has fixed the problem where some games like World of Warcraft and League of Legends showed the depth of 16-bit instead of 32-bit color
  Sorry for my bad English and thanks for reading this.

  I don't know what you have installed, but HP lists only single display drivers 8.15.11.8644A out on 09/01/2009

  It seems that you install either Nvidia graphics, and if you had looked at the Release notes you would see it is a driver for reference only and may differ the driver provided by the manufacturer of your laptop.

  So I guess you can install other drivers via update of windows, which is a no no.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3924886&prodTypeId=321957&prodSeriesId=3884578&swLang=13&TaskID=135&swEnvOID=4063#11360

  If you have problems with some games discovers that games makers site and forums for recommendations

• Fingerprint reader has stopped working after update vV1.0.3.49

  I recently downloaded from Toshiba and installed Fingerprint Utility V1.0.3.49 (tc00407400c.exe) and since my fingerprint reader has stopped working.
  The software opens but usually recognizes my fingerprints and can not connect any other way.

  Have uninstalled and reinstalled several times and same result.

  Device Manager says device works ok.

  May I ask what model phone you have and what system do you use?

  Probably, you need to delete stored fingerprints and after restarting again, you should try to register new fingerprints using the software update of fingerprints.

  Have you tried that?

• Skype has stopped responding

  When I run Skype everything is working when I logined with login, then it stops and says Skype has stopped responding. I tried to uninstall LogMeIn Hamachi, but it does not work! Help please!

  Never mind, I just needed to update to 7.1 so it works now but anyway tnx for your help

• Want to 700-021eo. : 15-one smart card reader will not work or show after upgrade to Win10

  15-one smart card reader worked fine under WIN 8.1 but after that upgrade to Win10 it does not appear in the list of devices. I have tried to find drivers but don't know if it's a unit of HP or Realtek or whatever. Any suggestions?

  Kind regards

  Eyvind

  Hello @Eyka,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that you have a problem with the smart card reader and wanted to help you!  I see that this problem started after the upgrade of OS Windows 10.

  It seems that there are no Windows 10 drivers available for your product on the HP site.  It seems that Windows 10 drivers can be pushed through Windows Update.  Alternatively, you can try to check this site as well:

  HP products - where to find Windows 10 drivers and software for my model?

  If you have problems to install the drivers, you can use the tool on the following site:

  Open the Windows Update troubleshooting tool

  It is possible that the drivers are not available for your product.  If this is the case, or the drivers you found do not work, try to use the solutions on this site to work around the problem and let me know how it goes: how: install and update drivers in Windows 10

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great weekend!

• Re: Qosmio X 500 - video driver has stopped responding

  Hi people,

  Recently (2 weeks ago) I started having some slight problems with my X 500, to be more precise Windows sometimes reports that the driver has stopped responding, but managed to restarted. When this happens the screen goes black, flashes several times and turns back on. But the strange thing is that this happens when the laptop has been used for MS Word/Excel/IE and high intensity graphic has been past nothing since he has been powered.

  My first thought was to update the drivers, since Toshiba downloaded the new nVidia ones a few weeks ago, but the problem persists. So I was wondering if anyone else had similar problems and what would be the best way to solve it? Would it be possible that something is wrong even with the gpu itself?

  Hi Snowy161_1,

  I had the same problem a few weeks ago and the solution is pretty easy: update the display driver. I removed the current version and restarted the laptop. Then I used CCleaner to remove the keys in the Windows registry and restarted again. Finally and most importantly, I downloaded and installed the new display from here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  By the way: the original windows from Toshiba installed at the moment?

• Pavilion dv6 fingerprint reader has stopped working

  My fingerprint reader has stopped working. I can open the Simple pass identification program but when I click on fingerprints, it indicates 'identity check' with an hourglass on the top of the icon of fingerprints, and no matter how long I wait, that's all that happens. All advice appreciated.

  -----------------------------------------

  Pavilion dv6t laptop 3100, Win 7 Home Premium 64-bit, 8 GB of RAM, processor i5

  "Where you go, there you are."

  Hi Mikey,

  Looks like you're running the Digital Persona of SimplePass flavor.

  Two things to consider / try, in order.

  If the reset works, you don't have to reinstall the driver...

  • Hard reset
  • Reinstall the driver

  Hard Reset:

  Sometimes, all you need to do is the computer suddenly.  This method works for a variety of connection and "glued" program issues.

  • Disconnect all the external devices first.
  • Remove the AC power and battery
  • Press and hold the power button while in the minus 30 seconds
  • Reinstall the power supply for the first start only * see Note
  • Power on - connect
  • Next time you shut down the system, replace the battery.

  * Note: You can ignore the little battery aside.  If you wish, replace the battery the first time and do it with her.

  =====================================================================================

  The pilot, from your Internet site:

  Validity fingerprint sensor Driver sp52354 V2.1.0.2

  • Install the validity sensor Driver installation package: it if called sp*.exe - the package will be most likely located in the downloads folder.  If you have control of "Admin", you can highlight the package and "double-click on ' to install it, otherwise just right-click, select"Run as Administrator"and install.

  I hope this helps!

  It's my pleasure to help.

  Say "thank you!" to the help by clicking on the star of Kudos to show your appreciation.

  Fixed?  Mark this message 'accept as Solution' to help others find the answers.

  Note: You can find "Accept as Solution" only on the threads started by you.

  Good luck!  Year of the Dragon!

• on dv6 fingerprint reader has stopped working after installing Norton 2012

  Fingerprint reader has stopped working after installing Norton Internet Security 2012 on both of my notebooks from HP.

  Product name: HP Pavilion dv6

  Operating system: Windows 7 64-bit

  Error message in Device Manager under biometric devices in Device Manager displays an exclamation mark beside validity sensors (WBF) (PID = 0018). The following message is under the general tab: "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) ».

  Driver is present and seems to be up-to-date.

  Appreciate your help.

  I have finally isolated the problem of my software lack of HP dv6 fingerprint reader. I think Norton Removal Tool, available online at www.symentec.com/nrt, was the reason. I am sure this conclusion because the exact same problem occurred after I installed Norton Internet Security 2012 on laptop HP same as my wife. I tried, in vain, to uninstall and reinstall the driver for the biometric fingerprint device provided by Validity Sensors, Inc.

  After spending a day and a half to try to "solve" the problem, I decided to restore my system and go back to the prior agreement of the point of the installation of Norton. Thank you HP to make this process quick and painless. Don't forget that if you installed anything after the restore point, it will have to be reinstalled.

  Fortunately, there's a less intrusive on CD of Norton removal tool. This utility uninstalls an older version of Norton you are requested to restart and then installs the latest NIS. It is a method of removal safer that wide brush offered by the Norton Online link, which wipes everything remotely suspect.

  After reinstalling Norton Internet Security 2012 from the CD, everything works as it should, including the fingerprint reader.

• Adobe Reader has stopped working

  My adobe reader has stopped working.  (Error meassage 1606 could not access network location % appdata%\).  I tried to uninstall the same error that presented themselves.  Tried to download adobe 9 same error appeared.

  Hello mchlmsv7,

  Thanks for posting your question!
  
  This problem may occur if there is an incorrect setting in one of the registry keys under the following:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders
  HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders

  (1) follow the steps described in the following article. Make sure that you use the chart for Windows Vista to step 3
  http://support.Microsoft.com/kb/886549/

  
  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

   

   

  If the article mentioned above does not work, follow the steps in the following article. (Skip steps that are already covered in the first article)
  http://kb2.Adobe.com/CPS/402/kb402867.html

  Please let us know if it helps.

  Thank you and best regards,
  Abdelouahab

  Microsoft Answers Support Engineer

• My computer has stopped responding to the parameters in my power options tool.

  My computer has stopped responding to the parameters in my power options tool. "IE I settled on 'disable the monitor in 15 min', turn off hard drives in 20 minutes" and "mode standby in 25 minutes.  But it does not follow these parameters. He just continues to run.

  original title: Auto standby until the day before

  You can try to change the settings, see if they meet the new settings and then change back to your desired configuration.

  Please give some more information:

  brand and model of the pc

  current antivirus

  Operating system and service pack

  Also this system to be free of infections:

  Download, install, update and scan with these full free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  http://www.Microsoft.com/security/scanner/en-us/default.aspx Security Scanner   

  After return with results and INFORMATION.