HP ENVY h8 - 1437c card reader

Similar Questions

• HP Envy 27 p075na: card reader does not

  Comes to take delivery of my AIO, everything is fine except the player integrated memory card does not work.

  Insertion of a card causes no change in the user interface and nothing appears in Device Manager.

  Not good for a new PC.

  Hi all

  Spent an hour with Dominic of online support, but no joy.

  He recommended a system restore, but it doesn't seem to be a factory prepared the restore partition - that is a problem.

  In any case, while preparing to create USB recovery media, I tried the memory card in my laptop works who reported that the card should be formatted so that windows could not format. Strange that both my old memory USB and Lenovo card reader work very well.

  Found a new unused card and this market!

  Seems there is something strange on the two cards I've tried before, perhaps because of the camera their formatting first?

  Thanks for the support, off the coast to create a recovery media now...

• Windows 7 64 bit drivers for HP ENVY 17-3000 card reader

  Hello I reinstalled Windows 7 from the disc and can not get the card reader to work properly. I tried the drivers on the site and it installs but still does not work. Below, I've given my hardware ID in the hope that this will help you to help me with the correct drivers.

  Here's my hardware ID:

  PCI\VEN_10EC & DEV_5209 & SUBSYS_1689103C & REV_01

  -Semper Fi

  gyrene2083

  Hello:

  Try the driver directly from Realtek.  A first on the Web page.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 15 & PFid = 25 & Level = 4 & Conn = 3 & DownTypeID = 3 & getdown = false

  Semper Paratus

• TouchSmart HP Envy 15-J104sa memory card reader does not

  I took delivery of a HP Touchsmart from Envy 15 - J104sa, running Windows 8.1 this week and the internal memory card reader does not work. It does not recognize SD cards (I tried more than one) and continues as if nothing has been inserted; Don't display an error message. The cards work on my previous HP laptop. The only way to get the laptop to show an inserted SD card is to run the driver software update (http://ftp.hp.com/pub/softpaq/sp63001-63500/sp63415.exe) whenever an SD card is inserted; This must be done with the card in the reader. If the software is running and then the card nothing happens. If the card is ejected and then re-inserted (or a new card inserted) it is not recognized and the process must be restarted and the driver reinstalled even though nothing has changed.

  Can someone please help me with this question or I'll have to go back to the HP laptop. I do a lot of photography so being able to read fast and reliable SD card is extremely important for me; It is not a problem, I was expecting a new laptop all right out of the box.

  Thanks to you all.

  Unfortunately not, updates of driver solves the problem, but an update of the BIOS through the HP helper application seems to have resolved the issue. While I appreciate there were not specific drivers available in my opinion, it is difficult to accept that HP should be able to release a model where they know the equipment are not fully supported by the operating system and in this case does not work.

• Envy 15 t-j100 card reader does not

  I have a HP ENVY 15 t-j100 Quad Edition running Windows 7. His card reader does not work. When I insert an SD card, I get a message that the device is not installed correctly. Windows prompts you to update me the driver, so I let him, but he can't find the driver. In devices with SD card inserted, Manager it shows a symbol in the "Other devices" section "hard drive"with a yellow "!"  The State of the device reads:

  "The drivers for this device are not installed. (Code 28)

  To find a driver for this device, click Update driver. »

  I tried to update the driver from there, but still no driver is reported to be found.

  Furthermore, Device Manager indicates that the Realtek PCIE card reader works properly. I updated the driver using sp66065.exe, but there is no difference. The card reader is still not read, nor is it a drive letter appear to the inserted card.

  If I disable the Realtek PCIE card reader, then the "other devices" "Hard drive" in the Device Manager goes. But the card reader does not work as long. If I activate the card reader, the same error comes back with a yellow '! ' under 'other devices' "Hard drive" in the Device Manager.

  Could you please tell me how to resolve this situation? Thank you in advance!

  jacksan1

  You are the very welcome!

  Oh... It's big, happy that the problem was solved after recovery

  It would very probably be updates of Windows.

  Try to create a system restore manually each time before performing any installation of update or something important. You can restore to a previous restore points you have created, if a problem occurs after an update.
  http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

  You can also create a shortcut to a button in your office so that you can easily create manual restore - Option 1 point in the following tutorial:
  http://www.SevenForums.com/tutorials/494-system-restore-point-shortcut.html

  System Restore: http://www.sevenforums.com/tutorials/700-system-restore.html

  I would also change the Windows Manual Automatic Update settings.
  This must be done in the HP support assistant program too - its control panel.

  I hope this helps.

  Have a good weekend
  God bless you.

  Concerning

  Visruth

• Envy TouchSmart 17 t-j000 Quad Memory Card Reader

  My Quad TouchSmart Envy 17 t-j000 memory card reader does not work.  Laptop is only around the age of six months and I tried a memory stick for the first time yesterday, and nothing happened.  The memory stick works fine in another computer.  When I plug the memory stick, there is no windows autorun and it is not listed in the window of this PC.  In Device Manager, I don't see the card reader USB controllers and hard drives.  I see not listed in Device Manager in a Realtek PCIE card reader memory technology devices.  It is activated and the latest driver.  I tried to stop, unplugged the power cord, removed the battery, reverse the procedure and restart the laptop with the memory stick installed, still nothing.  This desire came with Windows 8, and I've updated to 8.1.  In addition, all four USB ports work.  System diagnostic test has been carried out and everything.  Should I try to uninstall and reinstall the Realtek PCIE card reader?  Thanks to all who can help?

  The other option would be to conact support for more options:
  HP technical support: 800-474-6836. If you do not live in the United States / Canada region, please click on the link HERE to get help from your region number.

• 700 - 509nb envy: envy of 700-509nb: card reader is not recognize SDHC cards more

  After working for more than 1 year, today the card reader does not recognize SDHC cards more.

  He does it with Compact Flash cards.

  When the suspension on the device with a USB cable, the photo can be downloaded.

  Strange... someone at - it an idea?

  Simple but more obvious solution: a small card reader...

  Thank you!

• ENVY of HP TouchSmart m6-k015dx: SD card reader works only with windows 10

  After you have installed windows 10 the SD card reader will not work.plz help me I am a student and offbeat leactures etc. in my laptop.

  Hello:

  See if you install the driver of W10 card reader should be...

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_155234_1

• HP envy 15 touch i7: sd card reader hp envy 15 touch screen

  Hi I'm just wondering if the sd card reader is a simple pressure to pull type or it's a spring type IE push you to and give a boost again so he can spring back once again? I think having to push flush with the side then raised again with the tweezers or thin blade type object, it's really hard to get out. is this normal?

  bigmuddy11 wrote:

  Hi I'm just wondering if the sd card reader is a simple pressure to pull type or it's a spring type IE push you to and give a boost again so he can spring back once again? I think having to push flush with the side then raised again with the tweezers or thin blade type object, it's really hard to get out. is this normal?

  The only experience I have ever had is to press the card and then press again to release and remove it. This is the experience I've had on loans of HP product I had and on any device I've owned that uses an SD card reader or a micro sd card reader.

  It doesn't seem normal.

• DV6 7303ef: SD card reader does not work

  Hello, everyone,

  I have problem, SD card reader does not work. Laptop HP dv6 7303ef, windows 7 64 bit envy. When I don't put SD card to laptop card slot computer no response.

  What drivers I shoud install/reinstall or do something else?

  Reagardings,

  Jokubas

  Hello

  Try the driver from the link card reader.

  http://ftp.HP.com/pub/SoftPaq/sp56001-56500/sp56166.exe

  Kind regards

  DP - K

• Lightning to a resolution of the camera the incompatible SD card reader image

  I use the lightning to drive camera SD card with my iPhone 6 more (iOS 9.3.5) and MacBook Pro running Photos:

  Version 1.5 (370.42.0)

  Digital camera RAW 6.20 (856)

  Digital Camera Support RAW 6200 (233)

  Import RAW files from my Olympus EM10 on my iPhone, and then when I discovered the images in the Photos on my Mac I see incompatible resolution information.

  These are two consecutive images taken with identical settings...

  

  Drag the two images of Photos on my desktop (export in JPEG) then they have the correct resolution information...

  

  Also interesting. If I import these pictures directly on my Mac via the built in card reader, I do not see this problem.

  OK - when you import on an IOS device (the exact details are better ask in the forum iPad since it does not involve the Mac or Photos for the Mac somehow - it's strictly an IOS feature) in certain circumstances the maximum resolution is 2400 x 3200

  Your best solution is to import directly to your Mac

  LN

• air2 and iPad photo card reader

  I have an iPad 2 air. If. Load my photos on my iPad with the apple photo card reader / accessory... I'll be able to remove the ones I don't want iPad? and I can create folders on the ipad? Or do I have to use my PC for this? Thank you

  kathrynfromcarp wrote:

  I have an iPad 2 air. If. Load my photos on my iPad with the apple photo card reader / accessory... I'll be able to remove the ones I don't want iPad? and I can create folders on the ipad? Or do I have to use my PC for this? Thank you

  You should be able to remove them. I can't tell you for sure because I don't have a reader, but I suspect that the photos will land at film and anything in Czech Republic, you can remove the iPad.

  As for your second question, Yes. You can make Albums on the iPad. The albums will contain only pointers, the photos will remain in film in order not to remove it. The albums will be more enjoyable you can rearrange the order of the pictures by dragging them.

• Any card reader (driving us license and insurance card we) smart is available for iOS Device?

  I want to develop an application for iOS iPad kiosk for patients where patient can check-in in slippery sound driver's license or insurance card by card reader please suggest me if these (reader) hardware available that can be integrated with iOS app.

  I know it is a barcode scanner because I've seen it used in the elections, a couple of years.

  And there is magnetic tape (square) scanners that people use with their iPads.

  You may simply wish to Google and see what happens. Your question is somewhat a matter of niche, so may not find many answers here.

• El Capitan has taken my SD card reader

  Since my upgrade to El Capitan last week, my sd card reader does not work. She is not in the hardware. I did the reset where you unplug for 30 seconds. I did the control + apple + r + thing p and the card reader worked for only a few days. I can't do nvram and smc reset whenever I want to use the card reader, and I hate to use an external USB card reader.

  My card reader works fine on my 2011 27 "iMac. Have you tried using different cards, and if so have you seen changes?

  If for any reason, you are card reader does not work, then buy a card reader external USB and that should work well.

• My USB 3.0 internal card reader SD and bus have both work to quit at the same time. Need help in restoring

  On my Macbook Pro 13 inch Core I5 2 .6GHz, I just noticed that my SD card reader and USB ports have stopped working. Buses from USB 3.0 and player appear in the information of the reporting system. I tried to reset PRAM and SMC but no luck so far and my Time Machine backup is on a SSD in a USB 3.0 hard drive enclosure. Any ideas how to reset the USB 3.0 Bus and drive? I'm including all system information in case it is useful

  System information:

  Model name: MacBook Pro

  Model identifier: MacBookPro11, 1

  Processor name: Intel Core i5

  Processor speed: 2.6 GHz

  Number of processors: 1

  Total number of cores: 2

  (By heart) L2 Cache: 256 KB

  L3 Cache: 3 MB

  Memory: 8 GB

  Boot ROM Version: MBP111.0138.B17

  : 2.16f68 SCM Version (system)

  USB:

  USB 3.0 Bus:

  Host Controller Driver: AppleUSBXHCILPT

  PCI Device ID:0x9c31

  PCI revision ID:0 x 0004

  The seller ID:0 x 8086 PCI

  Host controller USB Bluetooth:

  Product ID:0 x 8289

  ID:0x05ac of the seller (Apple Inc.)

  Version: 1.18

  Speed: up to 12 Mb/s

  Manufacturer: Apple Inc..

  Location ID:0 x 14330000 / 6

  Available current (mA): 1000

  Current (mA): 0

  Additional operating current (mA): 0

  Built-In: Yes

  Software:

  Presentation of the system software:

  System Version: OS X 10.11.5 (15F34)

  Kernel version: Darwin 15.5.0

  Volume: Macintosh HD to startup

  Boot Mode: Normal

  MacBook Pro name: Stuart computer

  User name: Stuart Berwick

  Ensure the virtual memory: enabled

  Integrity of system protection: enabled

  Since the starting time: 6 minutes

  USB 3.0 Bus:

  
  

  OS X Yosemite: If a USB device does not work