SD card reader no longer works in Windows 7

Similar Questions

• U2413 SD card reader does not work with Windows 8.1

  My SD card reader does not work with Windows 8.1. There is no problem with the USB ports. Anyone else with problems?

  I have the same problem here too.

  The driver above does not work.

  

• HPE - 590t: 15-en-1 card reader no longer works

  Hi all

  Today, I noticed that my SD card reader stopped working in my HPE - 590t.  I noticed that Windows 10 assigns generic drivers at the following as shown in Device Manager:

  All other players are working perfectly, only the 15-in-1 card reader does not work, which leads me to believe that the generic drivers that has installed 10 Windows are not compadible with this device.

  My HPE - 590 t initially provided with drivers for 15-in-1 card reader and worked well with Windows 7. Anyone know where I can download third-party drivers 3 for this device? I read that some users who have realtek devices are able to use the realtek drivers.

  My HPE - 590 t has a card mother IPMTB-TK Pegatron Truckee - UL8E.

  Given that the specs on my system does not identify the manufacturer of the card reader - 15 in 1, I am at a loss to know where to go for the drivers for the 15-in-1 card reader.   If anyone has any suggestions, I would be very happy!

  HP DV9310 Windows 7 Professional 4 GB RAM

  DV7t-6100 Windows 7 Pro 8 GB RAM

  Hi all

  I just wanted to point to my own son I found a solution.  15 - in a single card reader had apparently dust causing the drive only reads do not my SD cards.  In which case I solved this situation by spraying a can of air into the slots and now the 15 - in-1 card reader works fine without problems.

• My built-in memory SD card reader does not work on Windows 8

  I installed Windows 8 on my new Acer AspireOne AO756 and the SD card reader does not work. I looked for some drivers and drivers Acer only give x 64 for Windows 8, but I only have x 32.  Everyone knows about this problem, and if so how to solve? Thank you

  Hello

  I understand that the casting of card reader does not work on your laptop.

  1. you get any error message?
  2 have you tried with different memory cards?

  I suggest you follow the steps mentioned below and check if it helps.

  Method 1:

  You can try to run the hardware and devices Troubleshooter and check if it helps.
  a. press the Windows key + R, type Control Panel.
  b. type troubleshooting in the search bar, click Troubleshooting.
  c. click on hardware and sound, click hardware and devices.
  d. follow the steps in the wizard to run the troubleshooter.

  Method 2:

  You can download the driver for the reader from the link below and install it in compatibility mode.

  http://Acer.supportscentre.com/driver-of-Acer-Aspire-one-ao756-Windows-7-32-bit.html

  You can follow the link given below to install the driver in compatibility mode.

  What is program compatibility?

  http://Windows.Microsoft.com/en-us/Windows-8/what-program-compatibility

  Make the programs more compatible with this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  Hope the helps of information. If you have questions related to Windows, please do not hesitate to post, we will be happy to help.

• Satellite Pro A100 - card reader no longer works

  Hello

  I have a Satellite Pro A100 - PSAACE-008002EN, that I bought a month ago, its worked perfectly so far and has been fantastic to use.

  The main part that I use is the memory located on the front card reader, I have used it with SD, MMC and cards XD for my pda and cameras, until now, it worked well, but recently, I was music transfer etc for my Sony PSP Memory Stick using a Memorystick Pro Duo Pro adapter so that the card fits properly in the slot and it works very well.

  All of a sudden the laptop can no more read on my MS card, I tried the card in a usb card reader and it works perfectly with or without the adapter. The laptop card reader reads cards SD MMC and XD, still perfectly fine but when I framed my memorystick, it shows the stick as being there in my computer, but when I click on the dialog box appears and says that there is no disc?

  I tried to install the latest drivers but it does not work, any help is appreciated

  Thank you very much

  Rich

  I found this information and first of all, I want to put a list of supported cards:

  SD (support of multiple Digital Media Card slot) capacity 8MB - 2GB
  Memory Stick (supported by several Digital Media Card slot) capacity 8 to 256 MB
  photo 16-1 GB xD card
  Memory Stick 8 to 256 MB
  Memory Stick Pro 256 MB to 2 GB
  MultiMediaCard 8 MB - 1 GB

  According to this list, the Memory Stick Pro Duo is not supported. But you used an adapter.
  But maybe this is a reason why the card reader cannot read the MS cards more.

  What you can do is to remove the card from the Device Manager reader, and after new restart try to install this new device

• E7440 SD card reader no longer works after update November 12 W10

  Since the last update of Windows 10 that came on November 12 the drive in my Dell E7440 SD card no longer works. I've tried different drivers, but when I look in the detail it shows the following:

  PCI\VEN_1217 & DEV_8520 & SUBSYS_05CB1028 & REV_01\4 & 32 c 44212 & 0 & 00E4 had a problem starting.

  Driver name: oem4.inf
  The class GUID: {4D36E97B-E325-11CE-BFC1-08002BE10318}
  Service: O2FJ2RDR
  Lower filters:
  Upper filters:
  Problem: 0 x 15
  Problem state: 0x0

  Simply, it does not show the SD card, and even when I remove all the drivers, restart and install again it does not work. Is this a known issue? Is there a solution already? Windows 10 worked very well in combination with the SD card reader until this update.

  HM, probably it is related to the BIOS update then. I flashed A15 and the SD card works again. I also found others on the internet with the same problem, so A16 BIOS should not be flashed for this model if you want to continue using your SD card reader.

• Satellite A100-259 and PCMCIA card reader no longer works

  I have a Satellite A100-259, I've had for about a year with no problems... so far, the PCMCIA card slot reader seems to have stopped working.

  When I insert a card reader SD PCMCIA discover the laptop hardware as a "PCMCIA UNKNOWN_MANUFACTURE' and subsequently can not find the drivers for it. I tried a couple of different PCMCIA devices and get the same question every time, I checked also double the card reader works by trying it in PC laptop Toshiba-not to the woman.

  The PC is a XP/Vista installation start-up duel and I get the same question under each operating system. I also think that it may have started after I installed upgrading the BIOS to 2.20.

  Any suggestions would be greatly appreciated, b
  Kind regards.

  Try to access the BIOS and set the defaults.
  Don t forget to save the settings after the change.

  By the way; Are you trying to reinstall the PCMCIA driver?
  Go to the Device Manager and remove the PCMCIA computer location.
  Then restart the laptop and check if Windows detects and installs the removed slot.

  Good luck

• Tecra M2 - card reader does not work on Windows 7

  Hi all

  I installed Win 7 on my TECRA M2 and everything worked well at the same time... except for one thing! The SD card reader is not recognized (works well with XP).
  Hint please?

  Thanks in advance

  JP

  Hello!

  The card reader is listed in the device with the yellow exclamation point Manager?

  Normally, I suggest that you should try the Windows Vista driver card reader, but there is no driver on Vista card reader available on the Toshiba site.

  So it seems that you have to live with this problem or you try a driver from another laptop computer card reader

  Good bye

• Memory SD Card Reader does not work on Windows 8

  I downloaded the driver now how i.t works

  My windows mobile 8.1 520 that SD card is not read or something earlier that I had problems with my phone and internet and all of a sudden all my downloaded apps show unavailable under them in my app list. Well, I was not able to get a data plan for a while, so now I want to fix my apps going again. I went into settings and went to storage or sense and pushed remove SD card and waited until he told me that he was sure. But when I put it in anything changed. I would like to know where. In my phone information I was able to read more info about the card SD and how to use it to develop pictures and things

• SD card reader no longer works

  Hey guys,.
  My 7 year old has a HP 7 1800. And a week ago it stopped reading the SD card. I thought that maybe she deleted or something, but I took it out and everything is always on the Samsung 8 GB card. So I didn't know if a restart/wipe would get the player to work again. Thanks for any help.
  Shaun

  z28in82 wrote:
  It was less than a year, am I looking for by contacting HP directly at this point

  If you did a factory image recovery and there is no change, contact HP.

• CREATIX card TV no longer works for Windows Media Center after you install Vista Edition Home Premium to Windows 7 Professional

  I recently updated my computer Windows Vista Edition Medion Home Premium to Windows 7 Professional. While my computer was running Vista, I could use the tuner TV SAA7131 Creatix card in my computer to watch digital TV British, that is to say Freeview. Before my upgrade to Windows 7, I checked all my drivers would be compatible, and the Advisory program told me that they would be sufficient. However, when I tried to setup of the library to receive a TV signal, the implementation will not progress beyond the screen "Considering television signals" Percentage of completion bar gets to about 90% and then does not move, or entirely 100%, but the screen does not change, and if I try to return to the main menu screen, Windows Media Center crashes with the 'circle of rotation of loading"and does not change.

  I reinstalled Cyberlink Home Cinema after realization of the Medion TV improve extra that comes with it, but that didn't seem to help. The same problem persists.

  I have still the disk with the drivers on, but I'm not sure how to reinstall the drivers using the disk, because the record for drivers TV Tuner does she not an executable file, just a series of system files, application extensions and the DAT files.

  Any help would be greatly appreciated.

  You must find the CTX driver version in the code of your tv card provider (poster Device Manager it under hardware ID in the Details tab) in the list of suppliers PDF in the FAQ section of the site Creatix. Then, you can download the right CTX driver from the support section. Is there a Windows 7 driver for my SAA7131 card.

• My ACER Aspire M5100 9-in-1 card reader does not work. Green light does not illuminate.

  The 9-in-1 card reader no longer works.  The Green led lights when I insert an SD card.  I tried to restart.  Cannot find the driver for the card in the Device Manager.  Does anyone know how to fix this?

  Thanks for all your help.  I solved the problem by turning off the computer, open the computer case and disconnect the cable card 9 in 1 black of the motherboard.  Then I restarted the computer and it re-installed device drivers (message Windows came).  For the first time, card reader devices actually appeared in Device Manager.  Then I turned off the computer, reconnect the cable black and rebooted.  Now everything works fine.

• The M70-267 Satellite internal memory card reader does not work

  Hello

  Internal memory card reader no longer works on my M70-267.
  Device Manager reports the error with the driver of the bus PCI 6 mass storage controller, device 4, function 3.
  The first problem, the result of this is?

  Help, please
  thanx

  Hello

  Yes, this mass storage controller could be the card reader. So, you can try to reinstall the drivers, which can be downloaded here:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  or you can remove it from the Device Manager and restart your machine

  or, if that didn't help then you should send your machine to a service partner chartered for an assessment of health/repair of equipment.

  To find the closest, you can check out this site:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Good luck
  See you soon

• Card reader does not work for Dell Vostro 1710 with Windows7 (32 bit)

  Hello

  Since I have Windows7 (32 bit version) on my laptop card reader no longer works. I tried several cards smart cameras, but none worked. Does anyone have an idea how I can fix this problem? I think I need a new driver, but I do not found.

  Your help will be appreciated, thank you in advance.

  Best regards

  Weserkrabbe

  
  

• Y50-70 - USB Reader and card reader no longer recognized

  I have Lenovo Y50-70 (running Windows 10) and my WD My Passport Ultra external drives are more recognized (they worked fine until 3 days ago). My card reader CF is no longer recognized either. My Samsung Galaxy S5 works well.

  The WD My Passport drives Ultra both my card reader still work with my older ThinkPad, which works in Windows 7. This isn't a disc problem, or a cable problem.

  When I look in devices and printers, the WD My Passport Ultra appears. It has the following warning sign for troubleshooting option. When I troubleshoot it comes back telling me that the driver is not installed. Continuing, he finds the driver, install it and asks to restart the computer. After the computer restarts, the drive still does not appear.

  When you look at the properties of the drive, it says that the driver is not installed and an error code 28 the list.

  Comment to Moderator: The model is added to the object for clarity.

  fgossieaux wrote:

  Thanks Bill - Sorry for not being specific. Both my WD drives (which have no external power sources) that my card reader does not work. I tried to remove the drivers and rebooted the computer, but none of it works.

  You can try to restore to a date (three or four days before the problem) and see if you have the problem solved.