SD slot not reading-dv7 6153nr - windows 7

Similar Questions

• CD drive not reading CD in Windows Vista__

  Hello

  I am running Windows Vista Home Edition 32-bit on an HP laptop. My CD-ROM/DVD-ROM drive has been working perfectly until a few weeks ago. Now, it does not read the CD. The CD-ROM is built into the laptop (not an external drive) and Vista provided with the laptop (meaning I didn't upgraded Windows anytime since my purchase).

  -By car the E: and F: appear under my computer
  -When I insert a CD in the drive, the light flickers and I hear the disc turns, but AutoPlay doesn't open as he usually does. I try to open it manually via Windows Explorer, the disc starts to spin and an empty window appears briefly before closing automatically. I get an error message saying that there is a problem with the drive.
  -Probably Windows can recognize that a CD is inserted, because when it is empty I always get the "Please insert a CD in drive E: /" message opposed to don't get no error message at all.

  I looked at these topics below on the question and the search for my problem through google without result.

  http://support.Microsoft.com/default.aspx/KB/314060 "your CD or DVD drive is missing or is not recognized by Windows or other programs.

  http://support.Microsoft.com/kb/939052 "when you insert a CD or a DVD, Windows Vista may not recognize the disc"

  -Registry delete "Lower filters" (there was no 'Upper filters' record on my system) did nothing.
  -Uninstall the drive E: and F: didn't work as well.
  -J' also uninstalled the 'third party programs"same Roxio so maybe it's not relevant, and my CD player still does nothing.

  (I rebooted after the three tasks above)

  I am at a loss here. What is most likely faulty hardware at this point?

  Thanks a lot for the answers!

  Hello

  If a PC. the CD/DVD is connected by cable (composite wire) to the motherboard, and if a laptop
  the CD/DVD is usually connected through contacts but who may also have connection cables
  to the motherboard. Not much can be done on a laptop except to try to replace the cables.

  Try to uninstall the unknown device and reboot.

  As convenience store will not work 100% of the time and he could still be software however it also
  could be material.

  You could try to return to a new installation of Windows - backup data outside the machine.

  Contact the manufacturer of the system - especially if it is under warranty or go in a real store of the computer
  (no pics and leeks to BestBuy or other BigBox stores). Rob - bicycle - Mark Twain said it is good.

• SDHC SanDisk card reader does not read cards on Windows 8.

  I recently updated to Win 7 to 8, after that my SD card reader is not read maps more. Y at - it a driver update that I can do? I couldn't find one in the sites of Sandisk or Microsoft.

  Original title: Sandisk SDHC card is not recognized in windows 8

  I tried not to the foregoing. But after a windows update over the last weekend, he started to work again.

• HL-DT-ST DVD - RAM GSA - H55N not reading / detects a Windows 7 installation disc

  I am fully updated, microsoft tried fix it. tried to roll back/update disk... Using windows XP. Drive works on 2 other laptops, so it isn't the drive. Could be my optical drive... all reg edit bugs in addition to buying a new one?

  Yes, peripheral is enabled, just windows 7 dvd that does not work, music CD, DVD pc game work, tried doug knox fix and reboot unplug the thing...

  You have a question for my optical drive...

  the power is connected, and the cable that has like 50 different plug ins., there are two other places that are not used... What are those for? I tried to find out if im missing something, but no other cable that can go into those... are just there for something else?

  Judging by you last post there is a problem with the disc. The fact that other devices rom on other computers may read it is not serious. Some are more susceptible to errors than others. As I said above, I repeatedly saw situations where a disc will be read by a device, but not by another. Personally, what I would do is put the drive in a rom device which is able to read, copy the files, and then create a bootable usb flash drive using Windows 7 USB/DVD Tool.

  Wonder what that "are the other two places. I assume you mean the motherboard there where other "two places". I can't say without seeing, but most likely they are the IDE ports. In fact, one is probably a rom or the hard disk and the other is probably for a floppy disk. The port to connect floppy will be slightly smaller in size.

  Is IT that you are talking about? Of course, the two TOS in the image are IDE and is not flexible, but unless you are experienced or look very close, you won't immediately notice the difference in size but it is quite substantial.

• LG DVD-RAM drive does not read disks in Windows xp

  ? LG DVD-RAM player does not play discs in my Windows xp...
  whenever I try to install the os (operating system) after it has been failed... he couldn't read the original 'os' and every time I install the 'os' by external dvd wrirer... is there any solution to this problem? I want to install "os" to my dvd burner cpu.

  It could be hardware issue, try to run the tool:

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/

  If this tool might not solve your problem, contact the manufacturer of DVD support.

• Cd/DVD drive does not read DVDs on Windows 7

  I have a HP Pavilion dv4 notebook with a DVDRAM GT20L ATA provided device with my computer and since I got it sometimes refuses to read my regular DVDs and dvd movies game disc sometimes. all the drivers are up to date and the problem seems to come and go. any help would be welcome. Thank you

  Hello

  Do you have any software installed on your computer for CD burning?

  Follow the steps in the article to resolve the problem.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Can not read DVD in Windows 7

  I use Windows 7 Home Premium 64 bit, and said Microsoft it has integrated DVD playback capability, I ran to the resolution of the problems and that it could not find any problem, run sfc .scannow that present no problem, but I still can't play the DVD. I set windows Media Player as my default player, no dice. I saw no indication of problems with my optical drive that he has read and written what I ask, except for DVD playback. I'm not advanced enough to know what to do next, so here I am. suggestions, anyone?

  See the following articles:

  Windows 7 - rip music from a CD
  http://Windows.Microsoft.com/en-us/Windows7/rip-music-from-a-CD

  Windows 7 - rip music from a CD in Windows Media Center
  http://Windows.Microsoft.com/en-us/Windows7/rip-music-from-a-CD-in-Windows-Media-Center

  Windows 7 - change settings for ripping
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-ripping-music

  Windows 7 - rip music: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/rip-music-frequently-asked-questions

  For your DVD question... maybe the info
  Ramesh Srinivasan would be useful...

  Click Start, default programs

  Click on "Set default access settings and the computer program"

  Click Customize, select Windows Media Player

  Click OK.

  He fixes the media file association settings automatically.

• SlimType BD E DS4E1S will not read discs after windows update

  My laptop has a Slimtype BD E DS4E1S drive.  After doing upgrades with windows 7, it can now read all disks.  All MS suggests tried, but nothing has worked.  Don't ask, discs have been read in the same drive, before this problem started.  The computer is only a couple of months.  This utility shows no problem with the drive.  It just keeps telling me to insert a disc, such that no disk is detected.  Already tried changes to the registry (MS) and uninstall, reinstall the driver with no result.  Any suggestions?

  Hello

  I suggest you to wait for the manufacturer of your computer, ASUS responds again to you. It's a hardware problem and I suggest you contact the manufacturer of your computer for assistance.

  Kind regards.

• Drive TSST TS-H653F not read disks in Windows XP

  Computer:

  Dell VOSTRO 200

  Hi Donald W.O'Connor,.

  1. were you able to use the drive before with no problems?

  2. don't you make changes on your computer before this problem?

  3. you receive messages or error codes?

  I suggest you try the fix it from the link given below and check if it helps.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Hope this information is useful.

• Can not read dvd in windows xp media player

  I'm new to computers. I have a Dell DV051 and I can't play a dvd.  I clicked on start, all programs, accessories, then entertainment.  There is no section of media player in the entertainment section, but it is a media center in the entertainment section.  Inside, I have media center programs, browse main and media center.  The arrow with the media center programs opens browse, Gallery player, gem master and otto.  When I double click the icon of off media player desktop and then click play DVD, I get; Media Center cannot detect a video DVD in the DVD ROM drive  Insert a DVD into the drive.  When I put a DVD in the drive, I get the same message.  I also went in the Device Manager, click on ligthscribe CD-ROM drives and got the mark of esclamation with the HL-DT-ST CDRW\DVD GCC4482 message yelow.  Whenever I start my computer my Media Player puts a box of green in the middle of the screen media player until the screen turns off, and then fills the screen with my Media Player.  I have to cancell go out to the Internet.

  
  

• For hp dv7 fingerprint reader works does not after updating to windows 8 pro

  I have improved my dv7 with windows 8 preview version and finger print reader perfectally well worked and when I have upegraded to pro it has stopped working. When I upgraded I lost a bunch of programs so can someone help because I loved using my fingerprint reader. Also I have upegraded of windows 7 to windows 8 Preview upegrading to pro version.

  Have you installed a driver of validity? It is necessary before the Simplepass software:

  http://ftp.HP.com/pub/SoftPaq/sp58501-59000/sp58900.exe

• Windows does not read sd card

  My SD card is the my camera, but when I put it in my laptop windows is not read.  What can I do to solve this problem.

  It reads any of my sd cards I got.   I have a kodak. don't know if I can bc I can't find my power cord

  ==================================
  If you insert the SD card into the computer card reader and
  Reach... Start / computer... you should see a few removable
  Discs that represent the slots on your multicard reader.

  If you click on the left that corresponds to your SD card
  You should be able to see the files on the card and copy.
  Paste or drag and drop in a folder on your hard drive.

  Maybe the following will help you restore AutoPlay:

  Windows Vista-
  Troubleshoot AutoPlay
  http://windowshelp.Microsoft.com/Windows/en-us/help/3ab73757-6b67-4e3c-80b1-a75651c7a9451033.mspx

  Windows Vista-
  How to change the auto run settings
  http://windowshelp.Microsoft.com/Windows/en-us/help/40f23376-1351-49d5-8d48-5c05d35f2ac81033.mspx

  Windows Vista-
  AutoPlay: Frequently asked questions
  http://windowshelp.Microsoft.com/Windows/en-us/help/7e1fe788-0747-4E00-895B-c3461b1ddd971033.mspx
  John Inzer - MS - MVP - digital media experience

• Attached to a letter from Apple is not read by windows computer

  Attached to a letter from Apple is not read by windows computer.  No current attachment.

  If you plan to support, you must provide much more information. Tell us exactly what you are doing and what is happening, including at the receiving end.

• Satellite L30 - 10V - CD/DVD read not all drives because Windows 7 upgrade

  I have a Satellite L30 - 10V which I've updated Vista to Windows 7 (full version). I am now unable to read any CD at all. He thinks that all CDs are totally blank new CD

  Anyone has any ideas what could be the problem?

  Hey,.

  > I have a Satellite L30 - 10V which I've updated Vista to Windows 7 (full version)
  Did you do an upgrade or complete new clean installation of your version?

  Anyway, the drive worked during installation that you was not able to install Windows. So I doubt it s hardware related issue

  In your case I would try to remove the upper and lower filters in the registry:
  1.demarrez-> Run-> Regedit
  2. navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}
  3. in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  4.reboot.

• TouchSmart HP ENVY 15-j009wm: TouchSmart HP ENVY 15-j009wm does not read USB Flash Drive after Downgrade to Windows 7

  I've demoted installed Windows 7 with Flash Drive but I need help. Windows 7 doesn't read my Flash drive more? He can read my USB keyboard but does not read a USB Flash drive.

  I have no Internet on the computer, so that means I can not update my drivers. And I have a few drivers in my flash drive I want to install, but I can't.

  I read this: http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/HP-ENVY-TouchSmart-15-j040us/td...

  It not me any more because I can't access my USB drivers

  Hello:

  Looking at your other posts it seems that you have yourself painted in a corner.

  Since there is no inheritance or the setting USB auto in the BIOS, your only option would be to remove the hard drive, then put it in a USB drive enclosure sata hard laptop, plug in another PC so it can be read, download the drivers there, you need and copy to you user profile on the hard drive removed.

  Chapter 5 maintenance manual provides the procedures of withdrawal and replacement for the hard drive.

  http://h10032.www1.HP.com/CTG/manual/c03733656

  Reinstall the hard drive, run the drivers, and you should be good to go.

  These would be the drivers you need for your model...

  SM bus controller: install this first and reboot.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=cp_127691_1

  USB3: Install these two and restart.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943835&swItemId=ob_139250_1&swEnvOid=4058

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943835&swItemId=ob_133037_1&swEnvOid=4058