SDO_GEOM. VALIDATE_GEOMETRY_WITH_CONTEXT for the validation of the polygon geometry
HelloI have a validation of the geometry of the polygon on a table SCHEMA. TABLE with the GEOM field, where the geometry is stored.
Can someone help me with an example SQL sentence to fill my SCHEMA. Table with all the errors that occurred in the SCHEMA VALIDITY. TABLE?
Thank you!
Dejan
Hello
-First create your table schema.validity
create table schema.validity (ID number, varchar2 (200)) of validity;
-Insert values into it
insert into schema.validity (id, validity) select id, sdo_geom.validate_geometry_with_context (geom, 0,000005) from schema.table;
-Updated the values inside
updated schema.validity an a.validity = set (select sdo_geom.validate_geometry_with_context (b.geometry, 0,000005) in schema.table b where a.id = b.id);
-Remove the real case of table schema.validity
delete from schema.validity where a.validity = 'TRUE';
Hope this helps
Baris
Tags: Database
Similar Questions
-
Hi people,
I found a strange case where sdo_geom.validate_geometry_with_context returns an error:
Select sdo_geom.validate_geometry_with_context (SDO_GEOMETRY (2003, 8307, NULL, SDO_ELEM_INFO_ARRAY (1, 1003, 1), SDO_ORDINATE_ARRAY (0,0, 51.9273, 0.3556, 51.9273, 0.3910, 51.9274, 0.1964, 51.9274, 0,0, 51.9273)), 1) twice;
13349 [element < 1 >] [ring < 1 >] [m < 3 >] [edge < 1 >]
Tolerance to 8307 SRID is in meters, right? The form is a parallelogram, although lat dimension is about 0.0001 grad or about 11 meters. All tips why is there an error?
using Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
Published by: Slava2 on May 27, 2013 03:12These edges are not straight, curved (large circles / on the globe/ellipse). Your first edge is almost 2 times the length of the 3rd. In your case, this means that the first edge is less "straight" / more curved.
The point on the first Board at longitude 0.19640 has latitude +-51.927445, which means that your 4th point is lower, causing the edges at the intersection (at the place described by Jum'a).You can quickly test it by drawing your polygon on Google Earth.
Small note to Jum'a, tolerance is (effectively) in meters. However must be no smaller than 5 cm, or 0.05.
Luke
-
Update for the SRID geometry error
I get "Ora-02309" Atomic breach zero on the updating of the SRID below.
Update my_table C
the value C.Geometry.SDO_SRID = 2958;
It has value null/no SRID in geometry.
Some people say "Begin your object before accessing", but I don't know how di it.
Thank you
Nancy.I think you have null geometries in your table
SELECT count (*) from my_table
where the geometry is zeroIf this is the case you can perform the following operations
Update my_table C
Set C.Geometry.SDO_SRID = 2958
When the geometry is not nullLuke
-
sdo_geom.relate returns the MASK of the UNKNOWN: 000000001
I have everything,
I use on a database of Oracle 11 g Release 11.1.0.6.0 - 64 bit Production With the Real Application Clusters option.
I have to determine what relationship there is between 2 sdo_geometry.
I run this query:
Select sdo_geom.relate (shape_1, "determine", shape_2, 0.5) determine,
sdo_geom.relate (shape_1, 'anyinteract', shape_2, 0.5) anyinteract
Double;
I get:
DETERMINE THE ANYINTERACT
MASK UNKNOWN: 000000001 TRUE
That means MASK UNKNOWN: 000000001 average?
How can I determine the relationship?
Thanks in advance.
SamuelThe second and third pairs ordered at the end are the same for the two geometry.
shape_1:-66.89470555713654,10.514948048707884
shape_2:-66.87824215820313,10.508391980537853remove the redundancy pts and see if that fixes the problem.
Jack
-
SDO_GEOM. Relate ("The INTERIOR", polygon, polygon)
Hello
I need to execute a query using a geometry table WKT, but it doesn't produce any result (0 rows returned)
The query is as follows:
SELECT... Of... WHERE...
AND SDO_GEOM. RELATE (GEOGRAPHICAL_LOCATION, "ANYINTERACT", MDSYS. SDO_GEOMETRY (2003,8307, NULL, MDSYS. SDO_ELEM_INFO_ARRAY (1,1003,3), MDSYS. SDO_ORDINATE_ARRAY (33.0,36.0,37.0,41.0)), 0.05) = 'TRUE '.
AND SDO_GEOM. RELATE (GEOGRAPHICAL_LOCATION, 'INSIDE', SDO_GEOMETRY ('POLYGON ((-90,180-180-90, 180 90, 90-180-180-90))', 8307), 0.05) = "INSIDE".
AND ROWNUM < 500;
If I remove 'INSIDE' query filter, it produces the results so I think that it is not a problem with the spatial index.
So dig in I met the problem, there is an inconsistency (probably I'm wrong somewhere). The symptoms are given such as:
1. try specified polygon is inside a box (World MBR [-180, 180] X [-90, 90])
Select SDO_GEOM. RELATE)
MDSYS. SDO_GEOMETRY (2003,8307, NULL, MDSYS. SDO_ELEM_INFO_ARRAY (1,1003,1), MDSYS. SDO_ORDINATE_ARRAY (36,26,45,26,45,38.5,36,38.5,36,26))
, "INSIDE."
MDSYS. SDO_GEOMETRY (2003,8307, NULL, MDSYS. SDO_ELEM_INFO_ARRAY (1,1003,3), MDSYS. SDO_ORDINATE_ARRAY(-180,-90,180,90))
0.05) than double;
happening 'INSIDE'
2 try specified polygon is inside a polygon (World MBR [-180, 180] X [-90, 90])
Select SDO_GEOM. RELATE)
MDSYS. SDO_GEOMETRY (2003,8307, NULL, MDSYS. SDO_ELEM_INFO_ARRAY (1,1003,1), MDSYS. SDO_ORDINATE_ARRAY (36,26,45,26,45,38.5,36,38.5,36,26))
, "INSIDE."
MDSYS. SDO_GEOMETRY (2003,8307, NULL, MDSYS. SDO_ELEM_INFO_ARRAY (1,1003,1), MDSYS. SDO_ORDINATE_ARRAY(-180,-90,180,-90,180,90,-180,90,-180,-90))
0.05) than double;
which produces 'FALSE' (and 2nd points of the polygon is defined in order counterclockwise)
3. try specified polygon is inside a polygon defined by WKT (World MBR [-180, 180] X [-90, 90])
Select SDO_GEOM. RELATE)
MDSYS. SDO_GEOMETRY (2003,8307, NULL, MDSYS. SDO_ELEM_INFO_ARRAY (1,1003,1), MDSYS. SDO_ORDINATE_ARRAY (36,26,45,26,45,38.5,36,38.5,36,26))
, "INSIDE."
SDO_GEOMETRY ('POLYGON ((-90,180-180-90, 180 90, 90-180-180-90))', 8307)
0.05) than double;
which produces 'FALSE' (and 2nd points of the polygon is defined in order counterclockwise).
4. to be sure, I generated WKT using geometry in 1st round by SDO_UTIL package which is
Select SDO_GEOM. RELATE)
MDSYS. SDO_GEOMETRY (2003,8307, NULL, MDSYS. SDO_ELEM_INFO_ARRAY (1,1003,1), MDSYS. SDO_ORDINATE_ARRAY (36,26,45,26,45,38.5,36,38.5,36,26))
, "INSIDE."
SDO_GEOMETRY (SDO_UTIL.to_WKTGEOMETRY (MDSYS. SDO_GEOMETRY (2003,8307, NULL, MDSYS. SDO_ELEM_INFO_ARRAY (1,1003,3), MDSYS. SDO_ORDINATE_ARRAY(-180,-90,180,90))), 8307)
0.05) than double;
that always produces 'FALSE '.
Could someone please help find what's not here.
Thanks in advance.
By the way; the oracle DB version is:
Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production
PL/SQL Release 11.2.0.2.0 - Production
"CORE 11.2.0.2.0 Production."
AMT for Linux: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production
found the problem to: http://docs.oracle.com/cd/B28359_01/appdev.111/b28400/sdo_cs_concepts.htm#SPATL624
who says:
The following size limits apply, with geodetic data:
- No polygon element can have a greater or equal to the half of the surface of the Earth.
- Online, the distance between two adjacent coordinates cannot be greater or equal to half of the perimeter (a great circle) of the Earth.
-
I currently have www.google.com set as my homepage, but Firefox says that the url is not valid for the default home page.
The problem is now solved with the current version of Firefox 10.0. Thanks for the help ccbrunt and SafeBrowser.
-
website valid W3C, initially no error reported by the developer toolbar. But by right clicking (giving the menu validation), the toolbar reports two errors: width and height. Despite the fact that each page is posted! The forum for the toolbar, it's supposed to be a browser error. So, how can it be fixed? I use FF 3.6.6
This has happened
Each time Firefox opened
is after upgrade to 3.5?
http://chrispederick.com/forums/viewtopic.php?PID=8239#p8239
You create a new profile and install only the extension Web Developer, as recommended Chris?
-
I get the following error:
error: implicit declaration of function 'GetActiveProcessorCount' is not valid in C99. Make sure that you include the prototype for the function.
I've included windows.h
which includes winbase.h
Winbase.h contains the prototype for the function in the above error message.
If I disable 'Require the function prototypes' and 'Building with the C99 extensions', I get the following error:
error: Undefined symbol "_GetActiveProcessorCount" referenced in "c:\Users\Public\Documents\National Instruments\CVI\HDLC\cvibuild. HDLC_RandD\Debug\HDLC_RandD.obj ".
I work in the ICB 2013 SP2.
Why I get this error.
This function is only valid in Windows 7 and later versions. Because the ICB 2013 still supports Windows XP, this feature is excluded by default from Windows headers that are provided with CVI. If you do not need to worry about the versions of Windows prior to Windows 7, however, you can include it yourself, by adding the following macro in the dialog box options generation CVI (be sure to include for all configurations):
-
I tried to uninstall silverlight to move to the most recent to be able to watch movies on netflix, but at the end of the uninstallation procedure, he says "no valid sequence were found for the set of patches", in other words, how I can uninstall it help me please.
Thank you
Hello
you are in the wrong forum for questions of silverlight
Try the silverlight forums
-
Original title: windows xp 512mg 160 GB how to install adobe reader
I can't install or get adobe reader, it says - check hotfix package hotfix for the Installer package valid window do - what I do?
Hi Ronald JBecotte,.
1. which version of Adobe reader you install?
2. This only happens when you try Adobe reader?
You can consult the Adobe support articles and check if help to:
Error "1635: this patch package could not be opened. Acrobat Reader 8 8
Important: The above article tells you how to edit the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.
For more information about how to back up and restore the registry, follow the steps from the link below:
How to back up and restore the registry in Windows XP
Update errors. Acrobat, Reader | Windows
Troubleshoot the installation of Adobe Reader. Windows
If you are facing the issue only with the installation of Adobe Reader, you can also get in contact with Adobe's Support for assistance:
-
I'm doing a fresh install of Windows XP Edition family on a new hard drive. I get the same error message indicating that the product catalog can not be installed. I reformatted and retryed with the same result. I tried a different HARD disk, but got the same trouble. I also tried installing XP Pro after a reformat and got the same error. The first error window says "the signature for the family Windows XP Setup is not valid. The error code is fffffc0d", and the second says" error: the system cannot find message for message number 0xfffffc0d text in the file for syssetup.dll fatal error messages: Setup failed to install the product catalogs. " Any directive or ideas would be greatly appreciated. THX
Hello
I suggest you try the steps from the link below and check if it helps.
http://support.Microsoft.com/kb/307153
Hope this information is useful.
-
I recently exported my outlook to a pst file and saved on my external hard drive. Since then I get this message when I open Outlook "the path specified for the file G:\outlook...pst is not valid. How to stop?
NEVER use the. Functions of export/import PST in Outlook. They are broken, have been for some time, data loss and often corrupt Outlook profile in use. To perform a backup, just close Outlook and make a COPY of the. PST file. Looks like (and I guess here) your external HD is G:\. This being the case, that. PST file is probably still attached to Outlook and Outlook can't find it. With Outlook open, see the supplement files pane. PST file, right-click, and then click "close". You may need to have the hard drive external and exported. File PST attached and available for work. If this does not work, you have damaged your profile and will need to make a new one:
How to create and configure an e-mail profile in Outlook 2007 and in Outlook 2003
HAL
--
HAL Hostetler, TCE
Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
www.kvoa.com - KVOA television, Tucson, AZ.
Live Hot Licks - www.badnewsbluesband.com -
I get a pop up saying error 1706 that valid no source is not found for the product my hub. Windows install cannot continue. Also "the feature you are trying to use is on a nework resourse which is not available."
Can someone tell me what to do and what is the problem
Thank you
Hi Traceyjane,
(1) when exactly it happens?
(2) do you use the computer as an administrator?
(3) what is the number of brand and model of your terminal?
If you try to install the software for your hub, make sure that you install the correct package for your computer.
Step 1: Try to install the program as administrator right click on the installation program files and select run as administrator , click continue if you are prompted to confirm.
Just check the items below that addresses a similar issue
The feature you are trying to use is on an unavailable network resource
http://support.Microsoft.com/kb/828376You receive an "error 1706. Valid any source not found for the product
http://support.Microsoft.com/kb/253768
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Activation key valid only for the update
I'll try to be brief... I have the battle with a nasty virus that, until I got rid of him, did a lot of registry changes. Even though I got rid of the virus, affects after having required that I do a new install. One of the changes the virus made to the registry has prevented the normal installation process see the C: drive. It was visible in my computer, but when you went to manage disks, it wasn't there while the program had nowhere to live.
I tried everything I could think of, but in the end, I had to boot from the CD to get the course of the installation. When I entered my key, he said that it was not valid for an upgrade and installation not complete. I went ahead anyway because it was the only option I had. After all, the PC OEM supplied with XP and I paid for the upgrade, then, what is the difference.
So... what should I do at this point? My activation key is only valid for an upgrade, not a full install.
Please see: How to contact a Microsoft Product Activation Center Carey Frisch
-
I did a new install of Windows 7 Professional on a workstation, and after all the updates, I installed Cobian Backup 11.
When you set up backup Coabian first, the message "the account name is not valid, or the password is invalid for the specified account name" was shown.
I went into the "services.msc" to manually set the password for the connection (the machine connects in a Windows Server 2003 domain), but when entering the dialog (properties/connection/account/local/search/select where you want to search for.) only the 'local computer' is displayed.
I tried to enter the domain/user and the password manually, I logged in as administrator, I have excluded the uder from the server and have included him again, that I did everything in my mind but I couldn't solve the problem.
Any help is welcome.
TKS in advance.
PS: Someone asked me what support Cobian said about it. To be honest I did not support Cobian because the other four machines were all as one that has the problem and two "local computer" and "directory of the whole area" appears.
This retail driver to believe that the problem occurred is on the installation of windows 7 Professional.
Hello
We have dedicated support team for users on a domain network. I suggest you to report your query in the TechNet forums to improve assistance in this regard.
Here is the link:
Hope this information helps.
Maybe you are looking for
-
Better call Saul! Season 2
Episode 10 is listed as episode 2 in the iTunes store. So, I bought 10 thinking that it was 2 ruin the season. I'm the only loser who had this problem?
-
Hello I tried Half Life 2 play today on my Satellite P30-133 and received the message:"Outdated video driver. Your video card driver is obsolete and might cause problems if you continue to run the game. We strongly recommend that you follow the link
-
Equium L350 - BSOD when I upgraded to 4 GB of RAM
I have a Toshiba Equium L350 (PSLD2E) and I'm running a 64 bit OS and also runs the latest version of the BIOS for the Toshibia and 3 GB of RAM, but when I switch to 4 GB, the machine displays a blue screen.I was wondering if Toshiba will relase a BI
-
How to remove the old timemachine/backup files from an old hard drive
I did not use a hard disk for time machine for several years (replaced by the 3 TB model). I had a few back normal of the files on it and everything just deleted the folder backups.backupdb. All but 7 mb removed. I then filled the hard disk with the
-
Darkside HP: HP Darkside: 3F0 error message
Hi, HP Darkside suddenly off son himself last night and when we try to restart it shows the following error message: Not found boot device Please install an operating system on your hard drive Hard drive (3FO) Diagnostics of F2 I read a lot of posts