SE message: printer not detected, the printer connected to the wireless modem and I can't print

Similar Questions

• Qosmio F10: Driver Installation does not detect the wireless network card

  I wonder if anyone can help before I phone supported again. My motherboard is dead and ASP replaced and recovered my laptop qosmio F10. Since having back, my wireless card did not work.

  Windows detects a "network controller" whenever it starts and gives me the opportunity to install it. I tried to install it by navigating in the 'tools and utilities' records CD rom for folders and subfolders of "Wireless network driver" and it still does not detect the card.

  I also tried to install using the cd rom web gui and selected the 'Pilot wireless network' link and then tried to install it. It opens a dos command prompt and try to install but comes up with the error "failed installation.

  I ran the customer service and they told me to run the qosmio recovery/then recovery of product/recovery of qosmio and again...

  I still don't the card wireless not yet installed. This happened to someone else?

  I tried already shot the drivers from the web, but with no luck... If a representative of customer service with the help of good technical knowledge that would be great, or if someone has encountered the problem too and he had fixed to the give me some advice...

  Thank you very much

  Sean

  Hello

  you see the card wireless as an unknown device in Device Manager? If this is not the case, perhaps that the card was not properly installed after replacing the motherboard.

  Sorry I have no other idea.

  Good bye

• my printer will not get the wireless signal and so my laptop can not find print, what should I do?

  How can I make the printer get the wireless signal?

  1 Microsoft do not have printers - so it would not be my first option to ask in the forums to help MS.

  2. we have even less likely to help when you do not tell us what printer, what operating system, what router wi - fi or anything!

  I suggest that you follow the instructions in your printer manual, with operating instructions of your wi - fi router to work things out.  You should connect the printer via a cable to the wireless installation.

  If stuck try the support forums on the Web site of the manufacturer of the printer with the forums on the website of the manufacturer of the router.

• Desktop computer can not detect the wireless router, even with adapter

  Hello

  I broke my laptop so I got out my old office since 2003. Its a gateway computer. There was no place where to connect my internet wire so I went out and bought a usb wireless adapter and updated my computer to Windows XP Home Edition. I put the CD and went through the Hardware Wizard. I said to her work and connected to the internet on the adapter set up the screen. BUT I can't access the internet. I tried the wizard network wireless, but sound does not detect anything either and does not work when I try to do it manually either.

  Help, please. I can't afford a new laptop close to Christmas it :(

  Hello

  • You have security software installed on the computer?

  I suggest to access the link below and follow the steps in the article to resolve the problem of connectivity wireless network on your computer and check to see if it helps you solve the problem.

  http://support.Microsoft.com/kb/870702

  You can also navigate to the link below and follow the steps in the article to set up the connection Wireless on your computer.

  http://www.Microsoft.com/windowsxp/using/networking/setup/wireless.mspx

  I hope this helps. Let us know the result.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite 5200 903 does not detect the wireless adapter

  Hello everyone,
  I wonder if anyone can switch me to it...
  Since I reinstalled the operating system (my XP pro SP2) PC seems not detecting don't nor the wireless adapter in the device under network adapter Manager.
  Also the light of the flexibility wireless no longer not.
  I also have problems to access the BIOS to check if the card is detected there, have not a Toshiba HW setup in Control Panel as described in the manual.
  Any suggestions?

  Hello Juliana

  The question is how did you install the operating system? If you use the restore CD to install all tools including Toshiba HW setup. If the unit is pre-installed with the Microsoft Windows XP Home edition CD, you must install all the stuff of Toshiba late.

  Just a little explanation about the wireless network card. Basically, if the wireless switch indicator turns not on s clearly indicate on hardware problem. I guess that the wireless card is faulty. Also check if the card is listed in the Device Manager.

  If you want to enter the BIOS settings pres ESC key at the boot routine and keep it down for a few seconds.

  Good bye

• Satellite sometimes does not detect the wireless network

  Hello

  My laptop Satellite sometimes does not detect wireless networks and the only thing I can do is to restart my computer, is there a solution for this?

  Hello

  Well, in most cases the WLan driver update could solve this problem.
  In addition its advised to check the firmware of the might of Wlan router must be updated as well.
  I recommend also to reset the settings of the WLan router and set it up again

  Another idea; Disable the save option in Win 7 the power supply WLan management

  Welcome them

• Laptops do not detect the wireless network

  Only 1 of the 3 laptops detects my wireless signal.  I restarted the router, the modem, and other portable... no change.  The signal is strong on the computer, pick up the signal.  What's wrong?

  Hello

  I suggest to refer to this link and follow the instructions in the link below and check, if this can help:

  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows

  It will be useful.

• We have just a new wireless modem and I can't print anything of theinternet help

  We recently got windstream to install a new wireless modem/router.  Recently, we have been able to copy items but still cannot print anything on the internet.  We are not so good at such things tech.  Can you please inform us as to fix our problem.  I know this is probably simple, but don't know how to fix it.

  Why not!  It cannot be that difficult.

  What is an IP address and where to get it HERE goto?

  DE-wrote:

  We recently got windstream to install a new wireless modem/router.  Recently, we have been able to copy items but still cannot print anything on the internet.  We are not so good at such things tech.  Can you please inform us as to fix our problem.  I know this is probably simple, but don't know how to fix it.

• BlackBerry Torch 9800 smartphones does not detect the wireless Ad Hoc network

  I try to connect my Torch 9800 for the ad-hoc WiFi network, I put in place on my Windows 7 PC with Internet sharing.  However, the torch does not list even the SSID in the list of detected networks.  I confirmed that the network Ad - Hoc on Windows 7 is in mode ' Waiting for Users ' and the torch can detect other networks nearby.  I tried clicking on "Other ways to connect" and manually enter the SSID, but it still doesn't work.  I've also confirmed that other devices (an another laptop Win7 and an iPad) have no problem connecting to the Ad Hoc network and Internet connection sharing.  Any ideas?

  * AT & T wireless

  * Bundle version 6.0 267

  Hi and welcome to the forums.

  I'm sorry to say that for safety reasons RIM disabled their devices to connect to ad hoc networks

  I know that his frustration... Sorry

  Good luck

• After installing photoshop cs 6 program do not see the drive working and I can't start the programm

  I have several extension also on my imac and a 500 GB ssd. Yesterday I put disks in al preferably hard extern as a scratch disk. This morning started the computer and photoshop cs 6 won't do it again. It doesn't to work records. all workdisks are connected to the imac. I have reinstall photoshop cs 6 and in the users/pref I removed preference of adobe.

  I stiil wil not work

  What is the solution?

  reset your preferences - https://forums.adobe.com/thread/375776

  [moved from Creative cloud download & install download, installation, commissioning]

• Qosmio G50 does not detect the connected Bluetooth devices

  The qosmio g 50 (windows vista ultimate) detects more devices via bluetooth
  Until two days ago, I pointed out quietly via bluetooth mouse. And then, do not know what is success does not detect any more.

  I did a test to see if it could depend on the PC or the mouse.

  I took the phone with bluetooth, I turned and qosmio, is not detect the phone.
  And the phone does not detect the qosmio via bluetooth.

  What checks can I make on the qosmio while ' I detect devices via bluetooth?

  Tank you

  Hello

  BT has been successfully activated on tis G50?
  Have you used the FN + F8 key secret to switch on the BlueTooth?

  Please check if the FN key works correctly, otherwise, go to the button start-> all programs-> Toshiba-> Flash Cards Support utility and restart the software.

• On my iMac running training camp. I get a message saying that my PC cannot find the wireless hub and it is unable to connect to internet Explorer. Help!

  Connection Wi - Fi with internet explorer 8

  I'm under Boot Camp on my iMac with OS 10.6.8. I am connected to the hub of my son-in-law over a wireless connection.  I can access the internet using Safari on the side of the Mac of the partition successfully, but I can't access the internet by using a wireless setup on the side of the PC of the partition by using Internet Explorer 8.  I get a message saying my side PC created by Boot Camp can not find the wireless hub and is unable to connect to internet Explorer.  Help!

  Hello

  ·          What is the version of the operating system running on your computer?

  I suggest you to install the drivers for the network card on the manufacturer's Web site and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  See: http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows

• Audio input Inspiron 15 3000 can not detect the headset

  Audio input Inspiron 15 3000 can not detect the headset, but audio dell can detect something trendy. However, the playback sound device cannot detect any helmet. Now I only get gurgling in the helmet. How to solve this problem?

  Hello. To test the headphone switch the native Windows audio driver Realtek audio driver.

  1. open Device Manager (type devmgmt.msc in the box of Windows search).
  2. develop the 'audio controllers, video & game' and right click on "Realtek High Definition Audio".
  3 Select this option to "Update driver software".
  4. click on "Browse my computer for driver software".
  5. click on "Let Me pick from a list of drivers on my computer".
  6. put the "Show compatible hardware" check box if not already checked.
  7. in the list of devices, click on 'High Definition Audio"(native driver).
  8. click on "next".
  9. in the update driver warning box, click 'Yes' (the driver).
  10 restart the portable computer if you are prompted. If not invited, so no need to restart.
  [To return to the Realtek driver, do it again but reverse the names in steps 1-6.]

  If it is still bubbling even with the native driver, test by using other headphones. If still no luck then probably hardware failure. Contact technical support for warranty repair.

  If it works fine with the native driver, then the Realtek driver is buggy. Try a different version of the driver. If you need help with this answer comes back with the full model name (something like "Inspiron 11 3147", etc.) and which operating system there.

• HP 15 D103tx: can't detect the wireless network adapter in Device Manager.

  

  I can't detect wireless network adapter in the device even Manager after installing the drivers wireless from the following link: http://support.hp.com/in-en/drivers/selfservice/HP-15-d100-Notebook-PC-series/6782098/model/6837966?...

  Wireless "F12" key remains orange color after pressing it several times. I tried to install "Drivers HP wireless button" from the link above, but between th installation process I have error ot OS isn't accomanied for pilots

  

  I can't connect to a wireless network from my wireless adapter doesn't work. I have to sit near my wifi router to connect with laptop computer using lan cable.

  Even HP Support Assistant does not detect the wireless network card hardware

  

  Help, please!

  Hello

  According to HP Partsurfer, your lapotp came with Atheros AR9565 802.11bgn 1 x 1 WiFi and Bluetooth 4.0 adapter combination WLAN. Also, your laptop came with FreeDos and I guess currently installed Windows 8 64 bit OS, I am correct?

  The Support page for your machine, doesn't show that the Realtek RTL8188EE 802.11b/g/n Wireless LAN Driver for Windows 8.

  Please download, save & install the Dirver and restart the system, check if the wireless works.

  Concerning

  Visruth

• Windows xp64 does not detect the printer hp laserjet p1102

  Hello

  Windows XP Professional X 64 Edition Version 2003 is installed on my server.  It does not detect the printer HP Laser Jet P1102, it needs of Virtual Port USB 001.  When I connect my printer, Windows does not detect the printer.  I lost the CD for the printer.  When I try to install the printer with drivers downloaded HP, it gets sleep showing message "Connect your USB cable" when it is already connected.

  Also when I try to connect to the printer on my workstation, Windows XP Professional 32-bit Edition, it must be connected, but off, the sharing is lost with other workstations, even if I set the static IP for all.

  Hello

  I suggest you post your query in the TechNet forum. Please post your question in the link for assistance below: http://social.technet.microsoft.com/Forums/en-US/itproxpsp/threads