Similar Questions

• Seagate individual cloud does not connect to internet

  I just bought a Seagate Personal Cloud NAS drive that I have connected to my imac through the router on a time capsule. The imac sees the Seagate, but when I try to put in place through the Seagate app, it tells me the the Seagate is not connected to the internet. The router provides internet to the imac via ethernet however following port.

  If anyone has had this problem or can suggest you a solution please?

  Thank you very much

  Simon

  I don't know what that has to do with Apple... you should probably contact Seagate for assistance. There are probably changes you need to make to your router to make it work. I remember hearing a lot of complaints about use it with AT & T Uverse service scheduled gateways.

• HP Officejet Pro 8600 Plus: scanner does not connect

  Help, please.  I have plugged in any place and unplugged, reset several times.  I keep getting this same error msg.

  The printer works fine but the scanner won't.

  Error Msg:

  Unable to connect to Debra PC/Scan docs.  Make sure that the remote computer is turned on.

  Hello

  Glad to know that the problem has been resolved.

  Marking this post as a solution it will be easy for others to see you the message easily.

• Yahoo mail does not connect to the server on one of my accounts

  Yahoo mail does not connect to internet

  Hello Curt,.

  Thank you for asking your question here in Apple Support communities. Seems that Yahoo does not connect on your iPhone 6s. I understand not email how important is for everything these days. I will try to suggest a few things you can do to test one we hope to get this up and ongoing run as you expect.

  The first thing we want to make sure is that all your data is safe. You can perform a backup to iCloud or iTunes. Use this article to help with this: backing up your iPhone, iPad, and iPod touch.

  Once your data is safe, try under Troubleshooting in this Apple support article: get help with Mail on iPhone, iPad and iPod touch.

  If you have any question, you may want to try this reset: If your iPhone, iPad or iPod touch connects to a Wi-Fi network. Use the section titled still not 'connect?' and follow the steps to reset the network settings. This brings the network settings to factory default. Then, you can try your email.

  If your Yahoo email account is an IMAP account, you can check the settings here: Apple Mail search parameters, then you can delete the account and set up again. This article should help you with that. Follow the steps described in the article, but remove account, then you can add the account of the rest of the instructions. Set up an e-mail account on your iPad, iPhone or iPod touch.

  Thanks again and have a great day.

• iPad does not connect to the server

  Kind of, it looks like my iPad has disappeared and twisted his tail (connection) and got lost somewhere in cyberspace.

  Yesterday morning he opens to the screen Hello > Slide Set up who brought up the screen 'could not activate iPad' with the message "your iPad could not be activated because the activation server is not reachable. Try to connect the iPad to iTunes to activate it, or try again in a few minutes. If the problem persists, contact Apple Support at apple.com/support".

  This condition actually began three days when it does not connect to my Airport wireless internet and I could not he deleted.  I made the troubleshooting on the dome using Airport utility that showed connections to the top and the green. My main computer is not affected. I was able to put a return by making a total system power off for a few minutes and then turned on one at a time with the modem (cable) beginning (all equipment - computers, iPad, modem and airport), then the airport, my main computer (2003 iMac screen all-in-one flat) then the dome of the iMac. They are all restored correctly at full speed. At the point where I was interested only in the dome as I was doing some work on it using Classic applications and did not activate the iPad until the most late in the evening.

  I was wondering what is happening and if there is an inexpensive way to get it running again?

  Sparkgapper

  p.s. There is an Apple Store here in El Paso, if it's a long drive where I live.

  If you have problems with the applications of stalling or crashing,

  double click on the "home" button

  -slide up on applications to force leave their

  Re-boot ipad.

  Press on and press and hold the sleep/wake button until a Red slider appears, and then drag the slider. Press and hold the sleep/wake button until the Apple logo appears.

  https://support.Apple.com/en-us/HT201559

  Force power down if above give it trouble you.

  At the same time hold the sleep/wake button and the Home button. Ten seconds or more.  Keep until the Apple logo appears.

  more information on the re-start:

  http://iPad.about.com/od/iPad_Guide/SS/how-to-reboot-your-iPad-power-off.htm

  This these tips from MichelPM to improve performance:

  https://discussions.Apple.com/message/29504169#29504169

  https://discussions.Apple.com/message/29504311#29504311

  Restore factory settings by loading the latest version of the ios that will support your machine:

  (1) make a full backup of your device if necessary.  Is two times better - cloud and computer.

  https://support.Apple.com/en-us/HT203977

  (2) three methods of restoration of your ipad.  [simple as abc]

  2.a) "you can use iTunes to restore your iPhone, iPad or iPod touch to factory settings and the latest version of iOS."

  http://support.Apple.com/kb/HT1414?viewlocale=en_US & local = en_US

  2.b) be a little more insistent: "you can put your device iOS in recovery mode, then restore it via iTunes.:

  http://support.Apple.com/en-us/HT201263

  3.c) as a last resort, you might consider DFU (Device Firmware Update).  This could void your warranty.

  http://www.IMore.com/Tip-put-iPhone-iPad-DFU-mode

• distance does not connect

  Logic remotely allowing to work on this system. Now does not connect the remote control. Using the logic 10.0.7 and system 10.8.5

  Not wanting to update system (work of plugins) and logic don't increase past this due to 10.8.5 I guess.

  Guessing the app remote has updated itself?

  Someone knows how to get these guys to play nice as they once ddi?

  Yes... the last LR now requires the latest version of logic to work correctly...

  Since LR iTunes Info page...

  The system configuration required

  Requires iOS 9.1 or later

  iPad support requires Logic Pro X 10.2.1 MainStage v3.2.3 or GarageBand v10.1

  iPad support Pro requires Logic Pro X 10.2.1 or MainStage v3.2.3

  support iPhone requires Logic Pro X 10.2.1

  I hope that you have a backup of the iPad in iTunes so that you can roll back the LR app on your iPad... for an earlier version, otherwise you are stuck, I'm afraid to say...

  Note: I recommend not turning not not on automatic updates on IOS or OS X devices due to these types of problems after applications or operating systems are automatically updated...

  In IOS...

  Auto power off app updates may be a bit difficult to find in the settings, but follow these quick steps and you'll be done without delay. Under the Automaticdownloads section, you will see an item called updates. Tap the toggle switch to turn it off so that it goes from green to gray.

  In OS X...

  There is a new default in OS X Mountain Lion. You can turn it off by going to the Apple, system preferences menu, and then selecting the Software Update pane. Uncheck all the boxes next to 'Searchautomatically the updated'and 'Download newly available updates in the background'.

• HP Officejet 6700 Premium suddenly does not connect to my Macbook Pro more

  Hey everybody,

  I got my HP Officejet for over a year and it has always worked perfectly. It has a stable wifi connection. Yesterday, all of a sudden the printer did not respond, so I asked my brother, who is the type of an It'er and removed the printer from the "Print & Scan" system preferences. Now, however, it will not be added more. As I said, it doesn't have a stable wifi connection, and I can see the presence of the printer when I click on the plus to add a printer, but then, if I want to add it, it says "cannot communicate with the printer at this time." I rebooted the computer laptop and printer and even left stop for the night, but it does not work. Nobody knows anything else to try?

  Thank you very much in advance

  Hi Elizaanne,

  I understand that you are having problems with HP Officejet 6700 Premium does not connect to your Macbook Pro.

  The router must sometimes be recycled.  I unplug the router, turn off the printer, shut down the computer.

  Turn on router wait 5 min and turn on the printer and the computer.

  Check the printer if the Wifi is STRONG.

  Open Preferences system, Print and or print and scan pane. If you see the printer listed
  Click Printer button remove. It will ask for confirmation to delete printer.
  Click on add it or + button, select the MFP Hello not Fax. Adding that should update the drivers.

  If the Wifi of the printer is not fixed, you will need to reconfigure.

  1. Press the power button to turn on the printer.

• Widows XP does not connect to my network.

  Widows XP does not connect to my network. (wired or wireless) The network is functional and all I can understand is ipsec driver service could not start because the specified file is not found. I tried to reinstall the drivers for my wireless card, an external wireless adapter and plug it directly into the router. It detects the network but will not connect to it.

  This could be caused by a virus.  What application antivirus do you use, and is up to date?

  In particular, see tcpip.sys.

  There are probably several copies of this file on a typical system of Windows XP.  The copy of 'work' found in C:\Windows\system32\drivers with a backup copy in C:\Windows\system32\dllcache.

  You can have additional copies in C:\Windows\$hf_mig$\KB951748\SP3QFE and C:\Windows\$hf_mig$\KB2509553\SP3QFE

  Assuming that your system is up-to-date, the tcpip.sys version should be 5.1.2600.5625.  It should be 353 KB (361 600 bytes).

  You might consider doing a virus scan online with, for example, http://www.eset.com/us/online-scanner/ or download and analysis with the multi-AV tool of David Lipman, which you can find here http://www.multi-av.thespykiller.co.uk/

  I also suggest to download, install, update and equipped with a system full scan with two of these free tools:
  Malwarebytes AntiMalware
  SUPERAntiSpyware

• HP dv6tqe does not connect to internet

  Ok.  My laptop does not connect to the internet. It connected to the wifi very well, but does not connect to the internet. I tried the wiring and that no longer works. All other devices connect correctly. I had this problem before about a year ago or not, and it was solved when someone said on one of updates windows, causing this problem. I uninstalled and everything worked well.  I am unable to conclude that now. The router is a Verizon Fios / Actiontec M142RWR router.

  I am running windows 7.

  Any suggestions would be much appreciated.

  Thank you

  Hello @knn9413,

  I read your post about how you are not able to access the Internet on your laptop, and I'd be happy to help you in this case!

  For more to diagnose this problem, I recommend later in this document on the troubleshooting your wireless network and Internet access (Windows 7), as well as the problems in Internet Explorer 9 or earlier versions (Windows 7, Vista, XP). This should help you navigate on the Internet once more.

  If you are still not able to log in, please follow the steps below to check if the laptop computer can communicate with the network:

  Step 1. Click the Start button
  Step 2. In the search box, type "Command Prompt"

  Step 3. Click on command prompt

  Step 3. Type 'ping www.hp.com' and press ENTER.

  Step 4. Now, I'd like you to record the IP address that is being crazy

  Step 5. Type 'ping '.

  Two pings succeeded? If this isn't the case, I would like to clear your DNS. You can do so by following the steps I outlined below:

  Step 1. Click the Start button
  Step 2. In the search box, type "Command Prompt"
  Step 3. Right click on command prompt

  Step 4. Click on run as administrator
  Step 5. At the command prompt, type "ipconfig/flushdns".

  At this successful? If this isn't the case, I would like you to reset the TCP/IP stack. To do this follow the next series of steps that I have set out below:

  Step 1. Click the Start button
  Step 2. In the search box, type "Command Prompt"
  Step 3. Right click on command prompt

  Step 4. Click on run as administrator
  Step 5. Type "netsh winsock reset catalog" and press ENTER.
  Step 6. Type 'netsh int ip reset reset.log' and press ENTER.
  Step 7. Restart your computer

  Then, if none of the above works I would that try you to install Windows updates in Windows 7. I recommend that ensure you that all updates are completed.

  Then, I would like that try you the next series of steps, I have outlined for you below:

  Step 1. Click the Start button
  Step 2. In the search box, type "Windows Explorer"

  Step 3. Click on Windows Explorer

  Step 4. In the address at the top of the page bar try to distribute a video or download Google Chrome

  Then, if all else fails we will try to use using Microsoft System Restore (Windows 7) to restore your computer to a point in time before that this issue has been raised. This does not affect personal files that you have on your computer, but it will affect on the settings that you have changed or applications that you have installed since the time that you return to. These should be redone once we are finished.

  Finally, if we still have the issue we are at the point where we have to use the HP support document: backup of files (Windows 7) to backup your personal files. Once we did it with success I would like to see again you and follow the steps in the HP Support document: performing a recovery of HP (Windows 7) system, which will guide you through restoring your computer to the factory.

  NOTE: This will destroy everything on your computer in order to ensure that you have backed up everything you want to keep.

  reference: http://h30434.www3.HP.com/T5/other-desktop-PC-questions/Ethernet-not-working-on-slimline-desktop/m-p/3985804/highlight/true#M47729

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• Backup does not recognize the previous backup CD

  When you click on backup:

  1. backup does not recognize the last backup cd. The only beginning of path to create a shadow copy backup is to insert a blank disc. How can I fix it?

  2 ive run backup from one day to the next day while he created a cliché. In the morning, it is only 1/5 complete suggesting that it is not working properly. I canceled the backup. How can I fix it?

  3. If I try to do another backup he asks the cd of your previous (cancelled backup) despite the fact that it was cancelled and the cds do not exist. How to reset to ask these latest records backup?

  Since then, I have downloaded all windows updates but the problem persis

  Thank you, Kel

  You mean by cliché, creation of backup image, right? Shadow copy volume is not Windows Backup.

  If you canceled the backup Windows is trying to finish the last backup. It's normal.

  All over again, trying to backup in a different medium, an external HARD drive.

  At first is a stop at the backup in progress"

  1. Restart the computer
  2. Run as administrator command prompt and run this: wbadmin stop job
  3. Typing sdclt.exe in command prompt and click on change settings
  4. Connect your external HARD drive or DVD
  5. If changing the settings is not available, then click on set up automatic file backup
  I hope that it will work. Please let me know the results to help others.

  Kind regards

  Helene

  Is this useful? Then please click the button to Vote as helpful . Is that an answer? Then click Mark/propose as answer

• HP OfficeJet 4650: HP utility does not connect to my new portable printer HP OfficeJet 4650 of my connected USB MAC

  Utility HP does not connect to my new HP OfficeJet 4650 of my Mac connected usb portable printer.  I have to turn off the printer, printer and try again sometimes that works.

  Welcome @grizley1967.

  Thanks to their participation in Forums of HP! I see by your post that the HP utility connects to the printer. I will definitely do my best to help you.

  Make sure that the printer is connected directly to the Mac with the USB cable.

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Open disk utility.

  Select the startup disk in the list of volumes.

  Click the first aid tab.

  To verify permissions, click on verify disk permissions. To fix the permissions, click on repair disk permissions.

  Restart the computer.

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  Feel free to click on the button 'Accept as Solution' and the 'Thumbs Up' for my help. Please let me know the results and if there is anything else I can help you. Thank you!

• Z30 Z30 blackBerry does not load unless it is rebooted and does not connect to the link

  My Z30 will load only if it is connected to an AC charger and the Z30 is restarted. My Z30 does not connect to my PC via USB. My Z30 running OS 10.3.2.2639. I did a soft reset (how I learned that it charges a restart), and recently completed a wipe of the device security. I bought the phone on October 5, 2014, and now is not working today. My dealer I come to, their store policy is only good for 30 days after purchase and referred me to go look at the manufacturer's warranty. The manufacturer's warranty is for 1 year. I just went this year a few weeks ago. Doubly upset right now!

  Hmmm... except maybe Pinterest, it is difficult to infer any specific causal event of this sequence; I hope that you have already tried to remove this app to see if things have improved. But before more destructive measures, please run the BBVE on the device to see if it provides any useful information:

  • http://support.BlackBerry.com/kb/articleDetail?articleNumber=000035973&language=English

  Also, that you take a LINK backup in order to recover? For example, if you know your configuration selections, the home screen configuration, add apps, claim, etc., then you can skip the backup and reconfigure simply from scratch. But note that it also requires that use you the best practice method for Contacts and calendar, in that your device does not have the data source 'master' for those, but rather some services online (e.g., Google, Outlook.com, etc.) is the master, and so when you reconfigure these data will simply restore servers, no LINK restore to get the data on your device.

  Let us know.

• App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  After upgrade 'OS X El Capitan' to "macOS Sierra" window only empty "App store" and page "Safari" made its appearance, no error message shows. store "iTunes" and "Dictionary" does not connect too.

  But Google chrome works well.

  So have you tried the next steps in your original post that Safari does not work after installing macOS Sierra:

  (1) x OS: "Unable to connect" or "unable to connect to the App Store. An internet connection is required"- Apple Support

  2) Advanced the steps to correct the problems with the iTunes Store - Apple Support connection

• Messages does not connect to the Yahoo IM account?

  Messages app v9.2, currently works very well with my Google account and iMessage, also worked with my Yahoo Messenger account, but recently (today?) does not connect to it.

  I know that Yahoo has made changes to their Instant Messaging System. This change affected only Messages?

  Hello

  I can't connect either (I didn't realize that I do not use)

  However going on the Yahoo Site and change the password does nothing.

  With the help of their option 'insecure Apps' does nothing no more (there was an email saying I was using access to messaging through an unsafe application - but I have not used their messaging service for a very long time.)

  It does say read more suggests, is not Mail (after OS X 10.9 is OK)

  He does not on access to their e-mail service.

  There is no option in Messages to try to activate disable SSL you can with AIM or Jabber accounts

  I have looked in the help (a little) but still found nothing.

  

  20:49 Tuesday. October 4, 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• iPhone 5 sec Bluetooth does not connect

  My 5s Bluetooth iphone works fine one day, the next day it does not connect to my Boise, helmet or Fitbit.   My Bluetooth is on, I have it enabled or disabled and you have rebooted my phone.  I have updated to IOS 10.0.2.

  I was able to pair with my ipad.

  Hello

  Try the procedure described in this article to support > get help to connect a Bluetooth device accessory with your iPhone, iPad or iPod touch - Apple Support