Search for Windows 7 and the button of level a top

Similar Questions

• I have improved my all-in-one for windows 8 and the touch screen does not

  Hello, I have an acer aspire one, and I just bought and installed upgrading windows 8 from the Microsoft site. He installed an "auditor of system" 1 who reported a few minor problems, but none of them were associated with wifi or touchscreen. after upgrade both the touch screen or wifi do any work! Good start of Microsoft! Why can't just work? "Anyway - I googled a little and found this is normal and I should have installed a pre-upgrade Acer 1 pack?  Is is true that I can't find it anywhere and I wonder if it exists, can someone point me in the right direction and also let me know if I can install it now that I have already installed windows8! Thank you all

  FReeZA... Thanks a lot for your help!  everything is working now and Windows 8 work well on this machine!  I also had to upgrade the driver for the wireless card get that work and found them on this page as well as the touch driver that you sent me!  Thanks again. http://www.Acer.co.UK/AC/en/GB/content/drivers

• I bought web premium CS 5.5 for windows 7 and the installation fails

  Hello

  The beginning of the installation goes well, the serial number is Ok.

  First DVD OK.

  Start of the 2nd DVD and many failures occurs, she begins with:

  Exit code: 7

  Please see the faults and warnings below for troubleshooting. For example, ERROR: DS013, DW050... WARNING: DS013, DW036...

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error, error 101 (s), 98 warning (s)

  WARNING: DS013: Payload {D38116C8-C472-4BB0-AD6F-0C1DD1320D1D} AdobeHelp 4.0.0.0 is already installed and the load of the session {7EABC54B-02C3-4DA1-9EB4-974CE7414066} AdobeHelp 3.4.0.0 has no connection to upgrade/conflict with it.

  ERROR: DS013: check the integrity of the payload: failed with code 1

  -Payload: {D92BBB52-82FF-42ED-8A3C-4E062F944AB7} Microsoft_VC80_MFCLOC_x86 1.0.0.0.

  ERROR: Error 1935.An error occurred during the installation of Assembly component {74FD3CE6-2A8D-0E9C-A01F-C8B3B9A1E18E}. HRESULT: 0X8007007E.

  ERROR: Install payload MSI failed with the error: - 1603 Fatal error during installation.

  MSI error message: Error 1935.An error occurred during the installation of Assembly component {74FD3CE6-2A8D-0E9C-A01F-C8B3B9A1E18E}. HRESULT: 0X8007007E.

  What can I do?

  Thank you.

  MichelS

  Errors ' Exit Code: 6, "" Exit Code: 7 "|"» CS5, CS5.5

• The search for exact strings (and the right formula)

  I am using FIND instruction to search multiple strings in a larger formula. The original formula that I do stand out is the following:

  = IF (ISNUMBER (FIND ('INC', A1)),' ', 'Y')

  Of course, this gives a Y if he finds some text in "". "" However, I have several channels for which I would check, and they need to be exact. That is to say when I search Inc. and Inc., I don't want Inc. to be counted. So, I tried the following formulas.

  = IF (ISNUMBER (FIND (OR("INC",inc"), A1)),' ', 'Y')

  = IF (SUM (COUNTIF (A1, "* INC. *","{* Inc. *}")),' ',' Y')

  The second works better, but it also counts Inc. as a football game. Any suggestions?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• compatibility for windows 7 and the weather channel desktop application

  I tried to download the weather channel for my office application, but because I have windows 7, they are not compatible.  The Compatibility Wizard recommended I go to the XP version, but it did not work. While I tried to do it manually, when this does not work, I hit the Web, but apparently nobody had this problem but me.  This thing STINKS full compatibility!  Can anyone help?

  Hello

  What happens when you try to install the application by changing the level of compatibility to Windows XP mode? You receive an error message?

  Method 1: You can try to install the application at boot and check.

  Note: After installation, follow step 7 in the link provided to return the computer to a Normal startupmode.

  Method 2: You can try to install the app to re download the app again.

• Search for Windows 7 and update broke and no validated true after HD upgrade

  I had to change the hard drive in my PC Windows 7. Used the system Windows and a Microsoft Backup System Image disc. But now, Windows Search and Windows Update are both broken and I continue the nag message that my copy of Windows is not genuine.

  Fix - it by Microsoft online tools do not work.

  How to validate the new drive, so I can use Windows properly?

  TIA

  Paul

  Looks like that driver Intel Rapid Storage defective.

  Download and install the latest version of Intel:

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=22194

• Search for Windows 7, why not if give me the files that are not yet in my augument search?

  Windows 7 Home premium 64-bit OS.

  Have a lot of files are duplicated.

  In Windows 7 lets say the files in the folder have files that look like:

  Bill 120.le rar
  Bill 121, rar
  Bill 1 .rar

  and we want to remove duplicates with '(1) '.
  and we enter research * (*)

  Under XP it would only list the file: Bill 1 .rar IF you entered *(*.)  or *) * or (1), etc.

  Bill 1 .rar

  In Windows 7, since I started to use Win 7 years, everything I do is get frustrited when it will sometimes give me what I ask for the Bill 1 .rar.
  but most of the time like now, will give me ALL the files WITH and WITHOUT the "()".

  Bill 120.le rar
  Bill 121, rar
  Bill 1 .rar

  WHY?  and how can he give me what I asked?

  (I tried ALL the settings and they all do the same thing)

  Enter in the search box:

  name: ~ = "{}"

  The ~ = indicates to Windows 7 search to look anywhere in the name.  Usually, the quotes would not be needed, but( ) has a functional use of search for Windows 7, and the quotes tell Windows 7 search just deal with ( ) as a chararacter.  I tried to find a way to search for a (?), after? as a wildcard but couldn't.  [Update: solution concludes, at the end of the post]  However, you can enter this to search for files named with the two ( and ), but not necessarily appearing in the (#) form.

  nom : ~ = "(" nom : ~ = "")" »

  or more compactly,

  nom : (~ = "(" ~ = "")" »)

  Update: more than a month later, I realized the more compactly.  Subsequently, the? is interpreted as a wildcard character.  If more digits is possible, then additional search with? exactly two for? for exactly three and so on.

  Name: ~ "* (?) *"

  If filename: is used instead, then the tilde is redundant:

  filename: "* (?)" *"

• Windows cannot find C:\WINDOWS\system32\rundll.exe. Make sure you typed the name correstly and then try again. To search for a file check the Start button and then click search.

  I tried to launch my Spysweeper and found that is not there, then I re downloaded and I could not install it because it was already on my computer.  I went to the control panel to remove and got the message:

  Windows cannot find C:\WINDOWS\system32\rundll32.exe.  Make sure you typed the name correctly and then try again.  To search for a file, select the Start button and then check the search...

  What should I do?

  Hi gsrow,

  You can go there!

  Cannot find the Rundll32.exe file when you open the control panel:
  http://support.Microsoft.com/kb/812340

  Alternatively, copy the folder C:\Windows\System32\DllCache Rundll32.exe file to the System32 folder. Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• Indexing options and search for Windows 7 are not locate content of the document since "update" Open Office 3.3 3.4 (he worked for 2 years before that)?

  I have Win 7 with Service Pack 1. I have "updated my Open Office 3.3 to 3.4 and now Win 7 search and options DO NOT locate my document content indexing more? I contacted the support of Open Office: http://user.services.openoffice.org/en/forum/viewtopic.php?f=15&t=55483

  They claim that: "indexing and search in Windows 7 are performed by Windows 7", so there is a problem with Win 7 search and indexing options.

  I checked the indexing options in Windows 7 and the "Index Properties and content of the file" is selected for ALL the 'odt' as well as all the files 'o'.

  I set up a test document: I put only one word "Wednesday" in the Open Office text document, saved and it called "text". I am looking for Wednesday and the search comes up with two other documents containing the word Wednesday in them, but not the Test document?

  I just discovered something. When I did the 'Test' experience above, the file was saved in format 'odt' a:. I changed it to a ".doc" file and it now appears in the search results. As mentioned above, I've changed ALL the files starting with the letter 'o' in Indexing Options > Advanced Options > Types of files to the article: 'properties Index and contents of the file. The description of filter for files 'odt' comes back as: "IFilter shop OpenOffice IFilter" where as 'doc' filter is listed as a: «Filter Microsoft Office» Is it a "Boutique OpenOffice IFilter IFilter: issue" Blocking "the documents appear in the search results? If so, how should I do (I mean in addition to all the documents 'odt' replacing 'doc'?

  Just to clarify: document names 'odt' come to a search, but not the content document.

  Hello

   

   

  Method 1: Run the following fix - it:

  Difficulty of Windows Desktop Search when it crashes or not display results:

  http://support.Microsoft.com/mats/windows_search/en-us

  Method 2:  Restore the computer to a date when it was working fine before:

  Reference:

  System Restore: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

• Im trying to upgrade to sp2 for windows vista and it keeps fail with the error code 80070017

  Im trying to upgrade to sp2 for windows vista and it keeps fail with the error code 80070017

  error 0 x 80070017 data ERROR_CRC des 2147024873 (cyclic redundancy check).

  The files may be damaged or missing. Make sure all files required for installation are available, and restart the installation.

  Clean the system (compensation to all Temp/Tmp folders and included the content delete all offline, the TIF browser, Cookies, compensation do a disk cleanup.)

  Click the Start button. In the search box, type Disk Cleanup, and then in the list of results, click Disk Cleanup.

  Maybe some interviews, try to run the "chkdsk/r" command at the command prompt

  Check disk or Chkdsk is disk error checking in VISTA. It can be used to verify orruption and optionally repair errors and bad sectors on the hard disk.

  How to run Checkdisk at startup CHKDSK

  http://www.Vistax64.com/tricks-n-tips/67612-checkdisk.html?LTR=C>

  Run SFC/scannow

  File system (CFS) auditor checks all files in Vista are where they should be, and that they are not corrupt.

  WHY: You want to ensure that the base operating system files have not been damaged or changed.

  How to fix and check the integrity of system files of Vista with the System File Checker: SFC/scannow

  http://www.Vistax64.com/tutorials/66978-system-files.html>

  04/01 / 1107:15: 20:00

• Search for files by using the Start button

  I've lost the ability to search for files by using the Start button.  I can enter a file name, but always get a response "nothing found".  I know I did something back a couple of weeks, but don't know what I did to turn it off. Help!

  Thank you!

  Take a look at my search installation tips.  If you are in these settings, you can make sure search is enabled and if necessary you can use the 'reconstruction' of the for button to rebuild your search system.

  http://Skeene.NET/tech/boost-Windows-search-in-two-steps/

  Also, there is an automated troubleshooting tool that tries to find and fix any problems with your search system.  You can go for it here:

  http://support.Microsoft.com/mats/windows_search/

• I woke up this morning and my iPhone 6 does not light. I tried to reboot it by holding down the button market / stop and the button "home" but the apple logo never appeared and I had on the charger for a while and still nothing. Please leave suggestions!

  I woke up this morning and my iPhone 6 does not light. I tried to reboot it by holding down the button market / stop and the button "home" but the apple logo never appeared and I had on the charger for a while and still nothing. Please leave suggestions! Thank you

  You can make an appointment at the Apple Store - Genius Bar store and bring it into service. You can also search an Apple Store - find a store - Apple.

• I installed a game for windows XP and then used the troubleshooting tool to convert so that I can play in 7.__it still doesn't react. What should I do? Please answer__

  I installed a game for windows XP and then used the troubleshooting tool to convert so that I can play at 7.
  It still fails. What should I do? Please answer

  Hello

  a. what game do you have installed?
  b. do you get errors trying to run the game in compatibility mode?

  Look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Measures to check the application event log:

  1. click on start.
  2. in the search box type eventvwr.msc, and then on enter.
  3. now, click Application in the event viewer (local).
  4. now locate the event log on the right side of the event viewer window.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer 
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  You can try to perform the clean boot on your computer and check if that helps.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  To perform a clean boot on a computer, follow these steps.
  1. click on start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.

  Please follow the system in the boot environment. If the problem does not occur, it indicates that the problem is related to an application or a service, we have disabled. You can use the MSCONFIG tool again to reactivate the disabled one by one element to find the culprit.

  If your issue is resolved, follow the how to determine what is causing the problem section in KB article to narrow down the exact source.
  For more information visit: http://support.microsoft.com/kb/331796

  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

  To restore your computer to a Normal startup mode, follow these steps:

  1. click on start in the box start the search.
  2. type msconfig and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or provide confirmation.

  3. on the general tab, click Normal Startup - load all device drivers and services and then click OK.
  4. When prompted, click on restart.

  You can check its compatibility with windows 7 in the Compatibility Center.
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Hope this information is useful.

• Code product key? had reboot my computer and I need a code for Windows Vista from the bottom of my laptop

  Hi, I'm having a problem with my laptop. I bought my laptop online, a year ago, and I got a virus. Then, I had my computer reset and I need a code for Windows Vista from the bottom of my laptop. After looking through records and information, we found that he had no number. He worked initially but then recently he was asked for a product key or something of the sort code. I was using my laptop but I cannot customise my background etc.

  Can you help me?

  Thank you very much

  The code is located on a label and is a 25-digit alpha-numeric (and very hard to read) code separated into 5 groups of 5 numbers separated by dashes.  If you can't find it on the bottom of your laptop, open the battery housing and remove the battery and look there - I know of cases where this is where it was placed.

  If you can't find the product key, your only choice is to contact the manufacturer and see if they can help.  Sometimes the relocations made with recovery disks don't need to be activated (depends on the manufacturer and their recovery process must ask them and confirm before you spend money on the recovery discs).  A valid product key is required for activation if activation is required - there is no way around this problem.  And in case you are considering on it, you can't switch from one product not enabled - you need to do a clean and complete installation (update disc will not work).

  I hope this helps and that the manufacturer can help you.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HP envy 14-2090eo: can I use the same drivers for windows 8 and 8.1

  When I check in drivers which operating systems there are drivers available for my Hp Envy 14-2090eo, it says Windows 8 (64-bit) and Windows 7 (64-bit), "and im currently using Windows 7 64 bit" but does that mean the drivers to support these 2 Windows 8 and 8.1 of Windows operating systems, said in a different way "» : are the same drivers for Windows 8 and Windows 8.1?

  Best regards from hpenvy1

  Hello:

  Your model has the AMD/Intel switchable graphics.

  It is unlikely that the W8 AMD graphics driver will work on W8.1.

  Normally, you can use some of the drivers W7/W8 on W8.1, but the graphics is very doubtful - not switchable graphics anyway.

  You can run the windows 8.1 upgrade wizard and see what it reports.

  http://Windows.Microsoft.com/en-us/Windows-8/Upgrade-Assistant-download-online-FAQ