Second FT VM cannot be created problem

Similar Questions

• Satellite A100-998: Partition cannot be created with Paragon Partition Manager

  Tried to use Paragon Partition Manager 8.5 and at the request of partition received message "' new partition cannot be created without doubt all the main locations are occupied." " There are two partitions identified, logic (c) primary format 186GB and logical (*) primary unformatted 251 MB 2049,9 GB i.d. 0 x 88 linux partition 0free plain text table.

  I have not tried any operation since buying disk management. How can I get my space to put my newly acquired Vista? What effect deleting partition (*) will have.
  ]

  Hello

  I'll try to clarify the situation on your HARD drive. as far as I know your laptop comes with preinstalled a? Media Express Playera?. It's small? Linux-baseda? application and it is installed on the small unallocated partition (about 250 MB). Please leave it is.

  Partition is primary can be reduced by about 40%. Of these 40% you leave, you can install Vista OS. On this way, you will have two operating systems, and every time that you start your laptop starts a? Manager will ask you what OS you want to boot.

  When you start the installation of Vista installation program will ask you where the Vista must be installed. Choose please this second partition.

  Let us know the results.

• FPGA Interface C API, error-63105, OR-RIO: C/C++ identifier is already in use and cannot be created.

  Hello

  Installation program:

  1 x the NI PCIe-7841R

  When I am trying to automatically generate a C++ API for my top FPGA VI using the FPGA Interface C API 12.0 I get the following error.

  Error-63105

  NOR-RIO:

  The "NiFpga_FPGATop_IndicatorBool_DMAFIFOtimeoutoccured" C/C++ identifier is already in use and cannot be created.

  Anyone know what this means? Is there some kind of limitation on the appellation of front interface controls?

  /Mola

  Problem solved.

  I had placed two flags with the same name on the front panel - by mistake. It builds the FPGA without errors, but the C API generator was not in favour of that.

  / Mola

• I upgraded my Vista Home premium to windows 7 ultimate, shortcuts on the desktop are not displayed, and can be created, or any folder cannot be created until the flash drive is reinserted

  during the upgradation he automatically took backup to an external flash drive, now every time I have to run has previously program I have to insert this flash drive.
  also all the shortcuts on the desktop are not displayed, and can be created, or any folder cannot be created so that the flash disk is reinserted

  Hi subhshy001,

  Welcome to the Microsoft Windows answers Forum community!

  Try this if you do not have

  Windows Explorer to create the folders and shortcuts in your document folder, drag and drop them on your desktop.

  If you have completed the steps and was not even useful,

  Follow these steps:

  Try to create a shortcut and sending it on the desktop.

  (1) open: Start Menu ,.
  (2) right-click: Internet Explorer icon .
  (3) select: send to > desktop (create shortcut).

  There should be a shortcut on the desktop .

  Make sure that the "show desktop icon" has a check against it

  OR

  Just click on the empty part of the desktop, choose new > then select the folder to create. Right click on this folder , select Rename it.

  If the steps above do not work then:

  You can scan your computer for malware.

  You can download, install and update anti-malware free of your favorite search engine and find malware.
  
  Important note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  If the scan comes back clean, so I recommend doing a System File Checker too l to analyze your OS system files.

  To help resolve this problem, use the tool (SFC.exe) System File Checker to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. open an elevated command prompt . To do this, click Start , click principally made programs , Accessories , right-click guest , and then click run as administrator .  If you are prompted for an administrator password or a confirmation, type the password, or click allow .
  2. type the following command and press ENTER: sfc/scannow (Yes there is a space after sfc) the sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. This analysis do take some time to complete.

  Hope this information helped!

  Thank you, and in what concerns:

  Aziz Nadeem - Microsoft technical support.
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Start repair cannot find a problem, but are still unable to start Windows Vista successfully.

  So here's the skinny.  I have a PC with Windows Vista Home Premium 64-bit.  I came home today and I tried to start it up, it got to the point where the bar is be thrown backwards and then what seems to have been that a BSOD flew for a fraction of a second the power cut and the system restarted.  Restart Start Up Repair did not work (you cannot determine the problem).  Could not start safe mode, and when I went to all our restore points had mysteriously disappeared the system recovery.  I checked the material widely to find errors, and it doesn't seem to be a hardware problem.  Since at this stage would not worth the hassle to track down a Vista Home Premium disc to make a repair (which I'm not sure would work based on reading other forums) a Windows 7 upgrade would solve the problem?  If that won't accomplish anything, I at least would be able to rifle through the old partition and get my stuff is back with a fresh install of Windows 7 on a new partition?  What can I do, or I am the GROUND.  There are a lot of things on this computer and I would be sad to lose.  Unfortunately, we are a company household risky here and nobody listened to me when I said that we really need get an external hard drive to make a backup, so we don't have not one.  Help would be greatly appreciated.

  Hi Loveofsporks,

  You are able to start Windows now? If this isn't the case, follow the steps below.

  1 restart your computer and immediately press the F8 key until you reach the menu Advanced Boot Options.

  2. Select Disable automatic restart in the event of system failure

  3. restart the computer.

  4. After you receive the exact error message.

  For an upgrade to Windows 7, you must be able to boot into Vista. A clean install would solve your problem if it's related software. Regarding your data, try to connect the hard drive to another computer as a slave drive to see if you can recover your data. You can check in the recovery software from 3^rd party in option.

  * With the help of third party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista update will not install and causes cell phone restart. Laptop will not reboot and Startup Repair cannot fix the problem.

  Windows Update tried to install 4 days now. Every time he tries it tells me it failed and trying to install in manually. He said then the laptop restarts, but it does not start. Startup Repair tells me that it cannot solve the problems.
  I don't know how to go beyond this problem, can someone help me? I have no disk Vista as it came pre-installed on my laptop. Help, please!

  If your Vista is preinstalled, ANY support for your laptop is the manufacturer of the computer, not Microsoft.

  Try this:

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not she, transfer your question in the appropriate Forum:

  Windows Update Forum:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot run "solve problems" in netwoking "

  I am faced with error "Diagnostics scripted Native Host has stopped working" when executing "solve problems".  repair network and cannot run the "problems".

  My windows update works correctly and is not facing any other question.

  Reliability history States 'sdiagnhost.exe' stopped working and also APPCRASH.

  I also created new user and find the same mistake made its appearance.

  Run the sfc and he found some files it cannot repair, summer of these added files. PL also help me if I can replace these files manually (and then how to extract the right files from windows sources CD) I find this article linked to this

  http://support.Microsoft.com/kb/929833/en-us#manually repair

  Find a file in journal SFC:

  Cannot repair the military record [l:30 {15}] "acppage.dll.mui" Microsoft-Windows-Application-experience - Tools.Resources, Version = 6.1.7601.17514
  Cannot repair the military record [l:42 {21}] "CipherSuiteOrder.adml" Microsoft-Windows-CipherSuiteOrder - Adm.Resources, Version = 6.1.7600.1
  Cannot repair the military record [l:18 {9}] "upcfl.ttf" Microsoft-Windows-font-TrueType-FreesiaUPC, Version = 6.1.7600.16385
  Cannot repair the military record [l:26 {13}] "RSSFeeds.html" Microsoft-Windows-Gadgets - RSSFeedsGadget.Resources, Version = 6.1.7600.16385
  Cannot repair the military record [l:22 {11}] "license.rtf" Microsoft-Windows-license-default - Ultimate.Resources, Version = 6.1.7601.17514
  Cannot repair the military record [l:22 {11}] "L2SecHC.dll" Microsoft-Windows-Layer2SecurityHelperClass, Version = 6.1.7600.16385
  Cannot repair the military record [l:30 {15}] "msprivs.dll.mui" Microsoft-Windows-LSA - MSPrivs.Resources, Version = 6.1.7600.16385
  Cannot repair the military record [l:34 {17}] "dpapi_keys DL.man" of Microsoft-Windows-Migration-DownlevelManifests, Version = 6.1.7601.17514
  Cannot repair the military record [l:40 {20}] "Telnet Server - dl.man" of Microsoft-Windows-Migration-DownlevelManifests, Version = 6.1.7601.1751
  Cannot repair the military record [l:76 {38}] Microsoft-Windows-Migration-DownlevelManifests's ' Microsoft.Windows.COM.DTC.Setup DL.man', Version = 6.1.7601.17514
  Cannot repair the military record [l:26 {13}] Microsoft-Windows-Migration-DownlevelManifests's ' GPBase DL.man', Version = 6.1.7601.17514
  Cannot repair the military record [l:38 {19}] Microsoft-Windows-Migration-DownlevelManifests's ' IasMigPlugin DL.man', Version = 6.1.7601.17514
  cannot repair the military record [l:34 {17}] "dpapi_keys DL.man" of Microsoft-Windows-Migration-DownlevelManifests, Version = 6.1.7601.17514
  Cannot repair the military record [l:40 {20}] "Telnet Server - dl.man" of Microsoft-Windows-Migration-DownlevelManifests, Version = 6.1.7601.1751
  Cannot repair the military record [l:20 {10}] "ds16gt.dLL" Microsoft-Windows-Microsoft-Data-Access-Components-(MDAC)-ODBC-Driver-Setup-Thunking-16, Version = 6.1.7600.16385
  Cannot repair the military record [l:52 {26}] "PreviousMenuButtonIcon.png" Microsoft-Windows-OpticalMediaDisc-Style-Performance, Version = 6.1.7600.16385
  Cannot repair the military record [l:42 {21}] "Perf_Scenes_Mask1.png" Microsoft-Windows-OpticalMediaDisc-Style-Performance, Version = 6.1.7600.16385
  Cannot repair the military record [l:48 {24}] "photoedge_videoinset.png" Microsoft-Windows-OpticalMediaDisc-Styles, Version = 6.1.7600.16385
  Cannot repair the military record [l:44 {22}] "NextMenuButtonIcon.png" Microsoft-Windows-OpticalMediaDisc-Style-Performance, Version = 6.1.7
  Cannot repair the military record [l:60 {30}] "NavigationUp_ButtonGraphic.png" Microsoft-Windows-OpticalMediaDisc-Styles, Version = 6.1.7600
  Cannot repair the military record [l:64 {32}] "menu_style_default_Thumbnail.png" Microsoft-Windows-OpticalMediaDisc-Styles, Version = 6.1.7600.16385
  Cannot repair the military record [l:36 {18}] "BlackRectangle.bmp" Microsoft-Windows-OpticalMediaDisc-Styles, Version = 6.1.7600.16385
  Cannot repair the military record [l:38 {19}] "cloud_Thumbnail.bmp" Microsoft-Windows-OpticalMediaDisc-Styles, Version = 6.1.7600.16385
  Cannot repair the military record [l:58 {29}] "Heart_SelectionSubpicture.png" Microsoft-Windows-OpticalMediaDisc-Styles, Version = 6.1.7600
  Cannot repair the military record [l:20 {10}] "pubprn.vbs" Microsoft-Windows-printing - AdminScripts.Resources, Version = 6.1.7600.16385
  Cannot repair the military record [l:32 {16}] "pwrshmsg.dll.mui" Microsoft-Windows-PowerShell - Message.Resources, Version = 6.1.7600.16385
  Cannot repair the military record [l:22 {11}] "cscript.exe" Microsoft-Windows-writing scripts, Version = 6.1.7601.18283
  Cannot repair the military record [l:24 {12}] "helpcins.dll" Microsoft-Windows-ServicingStack, Version = 6.1.7601.17592
  Cannot repair the military record [l:22 {11}] "cmnicfg.xml" Microsoft-Windows-SharedAccess, Version = 6.1.7600.16385
  Cannot repair the military record [l:24 {12}] "wmipjobj.mof" Microsoft-Windows-WMI-CreateJobObject-provider, Version = 6.1.7600.16385
  Cannot repair the military record [l:24 {12}] "secrcw32.mof" Microsoft-Windows-WMI-Mof, Version = 6.1.7600.16385
  Cannot repair the military record [l:24 {12}] "wmipjobj.mof" Microsoft-Windows-WMI-CreateJobObject-provider, Version = 6.1.7600.16385
  Cannot repair the military record [l:34 {17}] "I386\GS2171E3. PPD"prngt004.inf, Version = 6.1.7600.16385.
  Cannot repair the military record [l:32 {16}] "HPZEVW71. DLL.mui"prnhp003.inf.Resources, Version = 6.1.7600.16385,

  Hello

  Glad to know that you have addressed the issue.

  In Control Panel, you can enable Windows features enable or disable link on the left. .NET Framework will be in the window that opens, a check mark beside that that means that it is installed.

  Windows 7 comes with .net Framework 4.0 Client profile, you must install the lower version.

  I suggest you follow the instructions in the link:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/how-to-install-NET-Framework-11-in-Windows-7-64/eb1e6232-E874-432e-AB43-17660e25e43d?page=1&TM=1345067625733

  See also:

  How to determine which versions and service pack of Microsoft .NET Framework levels are installed

  http://support.Microsoft.com/kb/318785/en-us

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  How to: determine what version of .NET Framework is installed

  http://msdn.Microsoft.com/en-us/library/hh925568 (v = vs. 110) .aspx

  Hope this information helps.

• ad-hoc cannot be created

  Hello

  I want to do a special in windows 7 that I'm setting an ad hoc network profile after all he says "ad hoc cannot be created.

  Why is this?

  Hello

  Have you made changes on the computer before this problem?

  I suggest to run the network troubleshooter, and check the status of the issue.

  Using the troubleshooter from network in Windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  You can also refer to:

  Set up a computer-to-computer (ad hoc) network.

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

  Wi - Fi and in Windows network connection issues. http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• FDM - a script engine for the specified language cannot be created.

  Hello

  When I try to log into the application of FDM, I get the error message below. FDM - 11.1.1.3 application version. I restarted all services and tried to log in again. But getting same error message.  It was working fine before. Please could you help me solve the problem.

  "Error: an error occurred in the logging on the system." -A script engine for the specified language cannot be created. »

  Thank you

  Michel K

  Your vbscript.dll is corrupt. Replace with a good copy and register again via cmd regsvr32.

• Photoshop CS5 says me file cannot be created

  Help, please!

  I work on a Mac and using photoshop CS5.  Work with raw files I saved multiple pictures with no problem, but I'm now being told of file cannot be created.  Any advice would be much appreciated.  Thank you.

  First you ctrl-click on the thumbnail in the bridge.

  In the context menu, highlight, but do not click on the option "open in Camera Raw.  Do not move your mouse.

  Press on and press Cmd-Opt-shift

  Now you click on "Open in Camera Raw" to see the dialogue box reset

• cluvfy returns the "/tmp/" path does not exist and cannot be created on nodes

  Hello
  I'm installing Oracle RAC for SAP to AIX 5 L.
  After performing due diligence for the installation of cluster service, it returns the following message:
  "/Tmp/" path does not exist and cannot be created on nodes
  This meessage happens after checking access node and the phases of user equivalence.
  This is my complete log:
  pr_bd01/oramedia/clusterware/Disk1/cluvfy / > stage pre - crsinst - n pr_bd01, pr_bd02./runcluvfy.sh
  
  Conducting due diligence to install cluster services
  
  Audit accessibility of node...
  Verification of accessibility node from node 'pr_bd01 '.
  
  
  Verify the equivalence of the user...
  Check of user equivalence passed for user 'oracle '.
  
  ERROR:
  "/Tmp/" path does not exist and cannot be created on nodes:
  pr_bd01
  Audit will proceed to nodes:
  pr_bd02
  
  Check prior to the installation of cluster service failed on all nodes.
  
  The directory/tmp is a shared file system and oracle user can write and read
  User Oracle ID is the same in both nodes
  The dba group ID is the same in both nodes
  Oinstall GID is identical in the two nodes
  The primary group for the user Oracle is oinstall
  
  Where is my problem?
  
  Thank you
  
  Published by: user8114467 on 02/27/2009 07:17

  You can also run with - verbose flag - what is the difference between / tmp on 2 machines - define export CV_DESTLOC = /.

• Data source cannot be created: [MapperConfig] unable to add the source of card data.

  I get this error:
  * The data source cannot be created: [MapperConfig] unable to add the map data source.*
  
  While following step 2 of the installation Demo MapViewer tutorial.
  
  I have the BI server installed on a machine and to implement the demonstration on a data schema database RAC.
  
  I managed to configure the connection via OIC and TNS Planner,
  but now when I try to add, OracleAS MapViewer Admin, data MVDEMO source I get this error.
  
  I use:
  NAME mvdemo
  BASED ON: TNS is selected
  TNS name: ORCL_TAF
  User: mvdemo
  Password: mvdemo
  # Mappers: 3
  Max connections: 100
  
  Thank you
  Marco

  Hi Marco,.

  I had the same problem with the MapViewer and a RAC.

  You define your data source in the MapViewerConfig.xml? You will find this XML code under: j2ee/mapviewer/applications/mapviewer/web/WEB-INF/conf

  If so, you need to restart your OC4J Instance with the option "-userThreads. You can do this in the properties of the server administration/mapviewer/unter EnterpriseManager or with the opmn.

  So, I think, you have first to define your data source in the configuration file. Otherwise, it does not have with a CAR.

  I hope this helps.
  Andrea of CU

• recovery system cannot be created

  Recovery cannot be created

  What is next

• Cannot type, hardware problem?

  When the connection of the user, I couldn't type my password because the computer type the letter H continuous. My friend thought it was a problem of a bad keyboard, then it deleted physically from the laptop. I plugged a USB, same problem keyboard. Until I have a chance to press a key, the letter H is displayed continuously & backspace will not remove. Then I reinstalled windows xp, but when the time comes to enter the product key, I can't because of the letter HARMAN etc. Now I'm stuck in an endless install because the message "the file 'asms' on windows xp professional service pack 1 cd is necessary." "The type pathname file is located and click ok." In the box that I have would seize the file, HAROLD constantly. Command button will remove HHH, but when I'm not pressing strand CNTRL of h. The laptop is a Sony Viao pcg-8m3l. Keyboard still deleted cell phone fr. changed the hard drive, tried to reinstall, same prob. Start beeps continuously. Have that before the removal of the keyboard & before you reinstall attempt. Please let me know what hardware problem, I looked over. Thanx

  Hi KaliTender,

  Follow these methods.

  Method 1: Disconnect any external devices to the laptop and see if the problem still occurs.

  Method 2: Boot into the bios and reset

  Note: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  If the problem still persists, then contact the manufacturer for more help and information.

  http://eSupport.Sony.com/

• When I try to copy a file to an external device using Windows Explorer I get the following error message: "cannot copy. The directory or file cannot be created. »

  original title: could not copy files

  When I try to copy a file to an external device using Windows Explorer I get the following error message: "cannot copy.  The directory or file cannot be created. "I understand that I may have the physical limit of USB keys for the root directory.  How can I fix it?

  Hi GloriaZF,

  What is the size of your external hard drive and what is the available free space? Open my computer-> right click on the external hard drive-> properties. You will not be able to copy more data if the disk is full, or who have less space compared to the size of the file you are trying to copy.

  You need to remove the order data to make the space more. Deleted data from the device USB will be permanently deleted and will not be stored in your Inbox, so take care while eliminating unnecessary data.

  I hope this helps.