Second LOV data depend on selected data of first LOV

Similar Questions

• LabVIEW backup only 2 seconds of data in the file

  Sorry for this question of beginner, but after a few hours of searching for an answer and trying to solve the problem, I still can't understand.

  I use a DAQ Assistant vi, displaying the data on a chart in waveform, and to help to write it into a file as vi to try to save the data I collect (this is a while loop). A .tdm file is created successfully, but only about 2 seconds of data (25 k samples) are saved in the file. In addition, I write custom vi set to 'Add '.

  I need to save the data for the duration of my collection (between 2-20 min).

  I'm sure the solution is brutally simple, but any help would be greatly appreciated.

  Thank you!

  surffl wrote:

  Yes, I use the importer of CT in OpenOffice as provided for by the regulation.

  Do you trust to OpenOffice?  What do you get when you use the importer with MS Office?  I don't think you have a problem with your VI, but a problem with the importing program.  LabVIEW is certainly save more than 1 second of data in the file.  I thought that after each section headers might have caused and the file reading problem, but if you say settting it only write a header still causes problems with importing the data, I think that the problem comes from the importer.

• If I have the two LOV in the same table then how to connect when I select first and second LOV value also change?

  Mr President

  If I have the two LOV in the same table then how to connect when I select first and second LOV value also change?

  My two fields are FLOW AND DR_NAME

  FLOW = ACCT_ID

  DR_NAME = ACCT_NAME

  I created with success of LOV for these fields.

  First LOV gives acct_id in the debit field and second LOV gives the value of acct_name to dr_name.

  How can I report these lov, it's that when I change my acct_id then acct_name also change

  I have these two tables

  CREATE TABLE "NOM"  (
    "ACCT_ID" VARCHAR2(7) NOT NULL ENABLE, 
    "ACCT_NAME" VARCHAR2(50) NOT NULL ENABLE, 
    "O_BAL" NUMBER(13,2),
    CONSTRAINT NOM_PK PRIMARY KEY ("ACCT_ID")ENABLE
     
     );
  CREATE TABLE "VOUCHERDET" (
    "V_ID" VARCHAR2(9) NOT NULL ENABLE,
    "LINEITEM" NUMBER ,
    "DEBIT" VARCHAR2(7) , 
    "DR_NAME" VARCHAR2(50), 
    "CREDIT" VARCHAR2(7) , 
    "CR_NAME" VARCHAR2(50), 
    "PARTICULARS" VARCHAR2(100), 
    "AMOUNT" NUMBER(21,2),
  CONSTRAINT VOUCHERDET_PK PRIMARY KEY ("V_ID","LINEITEM")ENABLE, 
  CONSTRAINT PUR_SAL_LINE_POD_FK FOREIGN KEY(PROD_ID)
    REFERENCES PRODUCTS (PROD_ID)ENABLE,  
  CONSTRAINT VOUCHERDET_DEBIT_FK FOREIGN KEY ("DEBIT")
     REFERENCES "NOM" ("ACCT_ID") ENABLE, 
  CONSTRAINT VOUCHERDET_CREDIT_FK FOREIGN KEY ("CREDIT")
     REFERENCES "NOM" ("ACCT_ID") ENABLE,  
  CONSTRAINT VOUCHERDET_V_FK FOREIGN KEY ("V_ID")
     REFERENCES "VOUCHER" ("V_ID") ON DELETE CASCADE ENABLE
    );
  
  

  Concerning

  so, instead of this second ActId, choose ACCT_NAME:

  

• See the second LOV after submit first LOV without ajax

  Dear,
  How to display a second LOV populated after the sending of the first LOV without using ajax.
  Please could someone help me.
  
  THX.
  Celio
  
  Published by: Celio on 15-Sep-2009 22:33

  Hello

  Yes, I had the same problem. Make a calculation.

  Item name: LOV2
  Type: SQL expression
  Point calculation: After submit
  Computing: NULL VALUE

  Conditions
  Condition of type: Request = Expression 1
  Expression 1: LOV1

  This means that when you change the value of the LOV1 and LOV2 returns null.

  Mike

• I want to install Illustrator on my second computer and it keeps disconnecting. My first computer is turned off

  I want to install Illustrator on my second computer and it keeps disconnecting. My first computer is turned off. I pay package the student since April 2014 and for a year, and I understand that I can get Adobe in two computers at home.

  Thanks for your reply. I pay $ 22 a month package for a year. I just spoke with the help of Adobe, and I solved it they problem. I'm on my second computer. Magali helped me, service excellent customer!

  You are now chatting with 'Magali.

  Magali: Hello. Welcome to Adobe Technical Support.

  Magali: Hi there.

  Magali: Could you please develop your question?

  Magali: Are we still connected?

  Maria V Abreu Valarino: Hi. I want to install Illustrator and some other applications adobe on my second computer and it keeps disconnecting. My first computer is turned off. I registered until I turned it off. I have already downloaded creative cloud, I introduce my user and password and it tells me "you have been disconnected. I pay the student since April 2014 Kit and I'll do it for a year, and I understand that I can get Adobe in up to two computers at home. What should I do?

  Magali: If I understand correctly, you can not connect to the desktop CC application. Is this correct?

  Maria V Abreu Valarino: Yes, in my second computer

  Magali: Thanks for confirming.

  Magali: I'll be happy to help you with this problem.

  Maria V Abreu Valarino: Thanks a lot.

  Magali: Close all adobe applications running including the CC desktop application.

  Magali: You're welcome.

  Maria v Valarino Abreu:

  Magali: Place you C drive and type %LocalAppData% in the address bar and press ENTER.

  Maria v Valarino Abreu:

  Magali: Go to adobe.

  Magali: Go to the OOBE.

  Maria V Valarino Abreu: I don't have a folder under that name.

  Magali: Appointment to the Local and then go to Adobe.

  Maria V Abreu Valarino: ok, I'm in OOBE

  Magali: Then go to opm and remove the opm.

  Magali: May I ask if you are finished?

  Maria V Abreu Valarino: it says that the file is currently in use, does not want to remove it, and CC Office App is not open

  Magali: Launch the Task Manager and click on the "processes" tab and put an end to all the processes associated with adobe, creative cloud and synchronization of the base.

  Maria V Abreu Valarino: done, I deleted the opm

  Magali: Okay.

  Magali: Launch the CC desktop app and try to connect.

  Magali: And tell me if you still get the error?

  Maria V Abreu Valarino: ok, give a second

  Magali: sure.

  Maria V Abreu Valarino: nop, I don't sign

  Magali: I know the error message you get?

  Maria V Valarino Abreu: "logged out".

  Magali: Okay.

  Maria V Valarino Abreu: "you have been disconnected".

  Magali: Can I know if you are in home network or office network?

  Maria V Valarino Abreu: I am a student

  Magali: Okay.

  Maria V Valarino Abreu: I have two computers at home

  Magali: Okay.

  Magali: If please browse the computer and then go to the c drive.

  Magali: Go to windows.

  Maria v Valarino Abreu:

  Magali: Go to System 32

  Magali: Go to drivers.

  Maria V Valarino Abreu: I'm here

  Magali: Then go to etc and find the Hosts file in the etc folder and copy it to the desktop computer.

  Magali: and then open it with Notepad and copy the content and paste it on the chat window.

  Maria V Abreu Valarino: # Copyright (c) 1993-2009 Microsoft Corp. # This is a sample HOSTS file used by Microsoft TCP/IP for Windows. # This file contains the mappings of IP addresses to host names. Each entry # should be kept on an individual line. The IP # must be placed in the first column followed by the corresponding host name. # The IP address and the host name should be separated by at least one space of #. # Additionally, comments (such as these) may be inserted on lines # individual or follows the name of the computer that is designated by a symbol "#". # Example: # 102.54.94.97 rhino.acme.com # source server # 38.25.63.10 x.acme.com # x client name resolution host # localhost is handled within DNS itself. # 127.0.0.1 localhost #: 1 localhost

  Magali: Thanks a lot.

  Magali: Close the hosts file.

  Magali: Launch the internet browser explorer.

  Magali: I know if it is launched?

  Maria V Abreu Valarino: ok

  Magali: Open Internet Explorer > options Internet, click on the tab "connections". In the tab 'Connections', 'LAN' selection settings, you will be able to display the Local network settings. In the LAN settings box, select the checkbox "automatically detect settings".

  Maria v Valarino Abreu:

  Magali: Then "uncheck" all the other boxes as "configuration Script auto use", "Use a proxy server," proxy server "." Click on the ok button and then close the Internet options.

  Maria v Valarino Abreu:

  Magali: Launch the creative Cloud desktop application, try to connect using Adobe ID and password.

  Magali: I know the status?

  Maria V Abreu Valarino: it seems that it is me signing in, yet the blue circle of uoloading

  Magali: Okay.

  Maria V Abreu Valarino: Yes! I'm registered!

  Magali: great!

  Magali: Now, you can go ahead and the CC desktop application allows to install the CC apps.

  Maria V Valarino Abreu: John, you're the best! Thank you very much!!!

  Magali: You're welcome.

  Magali: I'm so happy to hear this from you.

  Magali: Is there anything else I can help you?

  Maria V Abreu Valarino: can I do a survey of your service?

  Magali: You receive an email that will contain a link to complete a survey in option to provide your comments on the experience of the support. Your comments are much appreciated.

  Magali: Her makes me happy to help you.

  Maria V Abreu Valarino: Yes I'll do without a doubt! Thanks again, have a nice day!

  Magali: You're welcome.

  Magali: take care.

  Magali: Please contact Adobe.  We are available 7 days a week, 24 hours a day. Good bye!

  --

  The chat session is over.

  Please contact Adobe.

  This chat session is over.
  Please contact Adobe

• What is the second release date for IOS 9.3?

  See what apple has stopped all updates for 9.3, when is the second the IOS 9.3 release date?

  Welcome to Apple Support communities

  I'm afraid we cannot give you an answer because we don't know anything. This will depend on the difficulty is to fix bugs that caused the 9.3 iOS to be fired, apart from the testing process that needs to be done

• Filling the first page second page data

  Hi all
  
  I developed a demo.cfm page that has the grid table. I display the table grid of database data.
  Each row of the table in the grid has a button change. Click on edit button redirects to another page that contains text fields whose names are similar to grid table headers.
  
  As soon as the user clicks on a particular line of the grid edit table button. Button clicked line values must be entered in the second text of page fields.
  
  Ex: Grid table demo.cfm contains the following data
  Name Age Sex Address
  
  1. 22 M Edit XYZ xyz
  
  When the user clicks Edit button form is submitted and in the second page text boxes him clicked on change line of link values need to be filled.
  Here we clicked on the first edit of a line button then second page text fields are filled with the values of line first.
  
  NAME: xyz
  Age: 22
  Sex: M
  Address: xyz
  
  Similarly, regardless of the line edit button than row data must be completed on the second page of the screen areas.
  
  
  How to solve this problem.
  
  Can someone help me solve this problem.
  

  Change the link must go to the second page details specific to this line.

  Do something like:

  
  Edit
  

  Then, in your form on the second page, you fill in the form as:

  
  
  

  Clearly this all depends on your so-called fields etc (I guessed right) and also, you will need to check some variables exist or not while it throws an error when they are not - but that's a different question.

  Good luck.

• Equium A100-027: recovery disk remove second partition data?

  I installed the update of Windows Vista Service Pack 2 and now the laptop will not charge.
  I have a partitioned hard drive and will have to use the restore product disc.

  I have a lot of pictures and things on the second part of the hard drive.
  I want to know if I use the restore disc it will remove the imformaton on the second drive hard or as the first?

  Thank you

  Hello

  The recovery disk will format the whole HARD drive and will be also possible to erase all partitions created on the HARD drive!
  This means that you will lose your photos and all data stored on the HARD drive.

  Therefore, you must back up the data before using the recovery disk!

  Welcome them

  PS: It is not necessary to create multiple views on the same topic ;)

• selection of the first column of the clicked row data

  All,

  Ive a report with a custom template and I want to return / select the first value in the column of the clicked folder, how can I get this data by using javascript code in DA or jquery?

  I did some research but couldn't do something similar.

  Classic report

  Apex 4.2

  Scott,

  I used the expression below, but it works only when the column ID/first appears, but if you set a column to not show IE uncheck the show of the column attribute, then it cannot read this value.

  $(this.triggeringElement) .find ('td:first').text())

  is there a way to always get that ID/first column when figure is not on the report?

  concerning

• Error importing the second database data dictionary

  SDDM 4.0.0.833 on Windows 7 SP1.

  I try to import in the same relational model, a production and a development Oracle database in two different physical models.  I select only users, roles and Tablespaces, no other database items.  When I click on finish, I get an error with a big red x box and nothing else.  These are the only entered in the journal (datamodeler.log) for today.  What I am doing wrong?

  2014-02-10 06:45:35, 076 [main] INFO ApplicationView - Data Modeler Oracle SQL Developer 4.0.0.833

  2014-02-10 09:29:39, 473 [AWT-EventQueue-0] ERROR DBMExtractionWizard - java.lang.NullPointerException

  2014-02-10 09:31:53, 576 [AWT-EventQueue-0] ERROR DBMExtractionWizard - java.lang.NullPointerException

  Well, it was weird.  I closed SDDM and re-opened and always less error.  Was supposed to work in another design, so I closed the test design and got a lot of mistakes in the journal about starting by ' 2014-02-10 09:48:27, 228 [Thread-60] ERROR DesignLevelSettings - cannot save the settings of level Design: "I opened my other design, made some changes, saved and closed SDDM again."  No additional errors in the log.  Now import works fine.

  Any idea what's going on?

• Second data line - first row to another column?

  Hi all
  
  I have a requirement to show the data from second in the Column1 as first line of Column2. Please see the example below, where the month is filtered < = 05.
  

  Month    Sales    Sales_New
  01         500      600
  02         600      700
  03         700      800
  04         800      900
  05         900      NULL

  In the example above for month 05, column Sales_New should show NULL because it is the last line of the query.
  
  Thanks in advance.

  Something has gone wrong with your config...!
  What is
  "In the criteria tab use months in descending order and in the PivotTable, use ascending order.

  It is mandatory to achieve...
  FYI: I tested in my local.

  If you need send screenshot

  I appreciate if you score as correct ;) else let me know

• Create a second data store or expand an existing for a second guest data store

  Hello

  I want to create a second guest in an ESXi environment with two hard drives. Currently a single guest runs on the first store of data on the hard disk of the first. The second hard disk is attached and I should expand the existing data store or create a new data store. Is performance better if each client runs on his 'clean' hard drives or is there no leak performance if I extend the first store of data.

  Kind regards

  Axel

  Hi Alex

  Because of course you need to better performace on your virtual machine when each of the virtual machine would work on the separate data store that is created on the separate physical hard drive. Is visible only in the DISK operation.

  A question, does your env test or production?

  If my answer is useful, click on some stars

  Visit my blog

  www.vmwaremine.com

• Add seconds to date in PLSQL

  Hello
  This is probably very simple, but I don't see it now :(
  How can I add the number (seconds) so far in PLSQL? I bet, there is a function for this.
  Thank you very much
  D.

  declare
   vdate      date;
   vseconds number;
  begin
    vseconds := 5;
    vdate      := to_date('2.1.2010 05:00','dd.mm.yyyy hh24:mi');
  //  vdate := vdate + interval vseconds second ...;
  end;

  declare
   vdate      date;
   vseconds number;
  begin
    vseconds := 5;
    vdate      := to_date('2.1.2010 05:00','dd.mm.yyyy hh24:mi');
    vdate := vdate + vseconds/24/60/60;
  end;
  

• regional settings/date problems; first day of week / browser language

  Hello
  I tried to create an event calendar portlet PL/SQL. My problem is that he reacts to the language of the browser or something, he goes all weird seen with browsers in another language.
  
  How can I force my portlet to be ONLY the Finns and Finnish. I DON'T want to change (first day of the week Monday or Sunday) according to the browser the user is using. I tried to use the third parameter to_char (p_date, 'dd.mm.yyyy','NLS_DATE_LANGUAGE Finnish = "") in all places, but it has no effect. Local database is correct (I think, I'm not the admin), but it still happens. Chrome, Firefox, IE show different tricks in the language of the browser.
  
  I'll tell you it's not not the most elegant coding ever (if it was I would have taken this into account and dealt with it!), but is it possible to force just my dates and variabes date to be Finnish, period.
  
  Published by: wand on March 9, 2010 10:37

  I have it.

  For public meetings, portal will indeed explore the language of the browser. Waiting on the language of the browser, the portal can display languages. Only when the users connect and set a language will be explicitly, we maintain the language setting, unless the user switches browsers again.

  DAD portal settings will replace your system NLS_TERRITORY setting scale indeed. The dads.conf will be something as AMERICAN_AMERICA. UTF8. If you want to override this in your portlet, you have to find a broken way the decision of the NLS_TERRITORY in the session. This can be done with dbms_session.set_nls ('nls_territory', 'FINLAND');

  for example for my previous example:

  declare
  Date1 varchar2 (2000);
  date2 varchar2 (2000);
  Date3 varchar2 (2000);
  Start
  Select to_char (sysdate,'Dy DD-Mon-YYYY "") today in the double date1;
  Select to_char (sysdate + (1-to_char(sysdate,'D')),'Dy DD-Mon-YYYY "") in double date2.
  Select to_char (sysdate + (7-to_char(sysdate,'D')),'Dy DD-Mon-YYYY "") in the double date3;
  HTP.p ("United STATES territory value");
  HTP.hr;
  HTP.p ("today: ' |") Date1);
  HTP.br;
  HTP.p ("first day of week: ' |") date2);
  HTP.br;
  HTP.p ("last day of the week: ' |") Date3);
  HTP.br;

  HTP.p ("defined territory in FINLAND");
  HTP.hr;

  DBMS_SESSION.set_nls ('nls_territory', 'FINLAND');
  Select to_char (sysdate,'Dy DD-Mon-YYYY "") today in the double date1;
  Select to_char (sysdate + (1-to_char(sysdate,'D')),'Dy DD-Mon-YYYY "") in double date2.
  Select to_char (sysdate + (7-to_char(sysdate,'D')),'Dy DD-Mon-YYYY "") in the double date3;
  HTP.hr;
  HTP.p ("today: ' |") Date1);
  HTP.br;
  HTP.p ("first day of week: ' |") date2);
  HTP.br;
  HTP.p ("last day of the week: ' |") Date3);
  end;

  Thank you
  EJ

• calculate a date field first of the month

  I need to calculate a date field using date of hire as a base date, and it should return the first of the month following 30 days of date of hire.  (date of rental + 30 days then first of the month following that date).

  Hello margery497,

  In this scenario, you can create a text field 1 with validation as a calculated field and can add now() formula inside. Then, in the text field 2, you can add the now() + 30 formula and save it with the calculated field.

  Here is the reference for validating field:

  http://helpx.Adobe.com/EchoSign/KB/form-fields---validations.html

  Kind regards

  -Usman