Secure desktop replacement

Similar Questions

• Issue of ASA 5540 and secure desktop Configuration

  Hey guys, I have the program installation and tested AnyConnect VPN and Cisco Secure Desktop successfully.

  Here's my question: is it possible to install two groups of VPN users, using Secure Desktop and who does not. Example of the groups below:

  Group 1: Corporate computers laptops that are not standard AnyConnect VPN Secure Desktop client.

  Group 2: Contractor and personal computers that cannot use the Cisco Secure Desktop via AnyConnect VPN.

  Thanks for you help guys!

  It is now possible to the 8.2.1. You can disable the CSD on a per database connection profile, you use Group URL subject.

• Cisco Secure Desktop installation

  Hello world

  I am very beginner in cisco device. in my Office I have vpn 3000 Concentrator and would use the secure desktop cisco with her

  succeced, I have install Secure Desktop version 3.1.1.45. to test, I would run cisco secure desktop from my client computer (XP). that means url I enter in the internet browser?

  Thank you

  ADI

  You would https to the public ip address of VPN concentrator.

  Here is more information on how to configure CSD on VPN hub for your reference:

  / * Style definitions * / table. MsoNormalTable {mso-style-name: "Table Normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-priority: 99; mso-style - qformat:yes; mso-style-parent:" ";" mso-padding-alt: 0 cm 0 cm 5.4pt 5.4pt; mso-para-margin: 0 cm; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; font-size: 11.0pt; font family: 'Calibri', 'sans-serif"; mso-ascii-font-family: Calibri; mso-ascii-theme-make: minor-latin; mso-hansi-font-family: Calibri; mso-hansi-theme-make: minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-make: minor-bidi ;}"}

  http://www.Cisco.com/en/us/partner/docs/security/CSD/csd311/csd_for_vpn3k_cat6k/configuration/guide/CSDprefc.html

  Hope that helps.

• Where can I download Cisco Secure Desktop (CSD)?

  I need to download Cisco Secure Desktop and I followed the link provided below of cisco... but he gave sent me to a different link.

  http://www.Cisco.com/c/en/us/TD/docs/security/CSD/csd34/configuration/gu...

  http://www.Cisco.com/cgi-bin/tablebuild.pl/secureDesktop

  Help please!

  If you have found useful information, please mark it as correct.

  Thank you.

• On the Cisco secure desktop PC emulator

  We have an ASA 5550.  We need to install the software host explore on each computer so that users can make payroll on the mainframe.  It is possible to install this software on the Cisco Secure Desktop uses SSL client so that it is unnecessary to install Explorer host on each computer?

  Thank you.

  Diane

  No, you can not use CSD to install the software you want to install. CSD provides a virtual office to provide the secure environment when you connect via VPN/SSL. CSD is not like citrix or RDP unfortunately.

• Reference Dell Desktop-replacement for Nvidia GeForce GTS 240 graphics card

  Nice day. I hope an expert can help me.

  My computer: Desktop computer Studio XPS 8100 Dell, intel Core i7 870 2.93 GHz, 8 MB, etc.
  Graphics card: NVIDIA GeForce GTS 240 single memory 1 GB. Reading, not sold at retail and is now no longer available.
  Unit of power: 350 Watt maximum.

  I do not use the computer to play games.

  For various reasons, you can Please provide DETAILS for me a graphics card in replacement of approximately the same 'power' +. I can myself, slot load driver and be operational. Don't not changing other pieces (I hope) and there seems to be so many available graphics cards.

  I hope for the purchase of the graphics card via Internet, British supplier and then abroad for me.

  In the meantime, thank you for your help.

  Leonard

  Hi Skanter - just saw this message-hope it comes in time

  I had this problem with mine - it was also to achieve 90degC. It is caused by a really poorly designed cooling system - the fins of the radiator are locked behind a metal shield and the fan blows into it.

  What you need to do is: -.

  (1) turn off and unplug everything from the PC

  (2) open the side panel and disconnect the audio cables and power of GPU

  (3) remove the mobo

  (4) with the help of a tiny posidrive screwdriver, unscrew the thin metal cover of heat sink

  (5) use a brush to remove all the dirt you may see! DO NOT BLOW IT OUT WITH YOUR BREATH!

  (6) reassemble and hopefully enjoy the silence!

  If you still get the noise the chances are some dust penetrated fan (this happened to me when I used compressed air to blow the heat sink). Replacement fans are as rare as horse poop to switch I could not even one of the original manufacturer (path to the bottom of the chain - don't expect any help from Dell or nVidia here, I'm afraid) but are thankfully easy to fix.

  GTS 240 fan fix: -.

  I do memory-sorry if I get something slightly wrong!

  (1) remove a map as shown above. Once the radiator fan cover will be exposed.

  (2) very gently, using a pair of small screwdrivers hanging under the blower rotor, gently lift the rotor clear of the case. He doesn't want to go at first, but be patient and try and apply steady pressure on each side.

  3) out of the bearing once clean any muck-it only takes a small amount here because of the noise.

  4) applied with a headset, a tiny (and I mean tiny) bit of WD40 (don't know what this is called in the United States-but it's a wonder spray!) for the bearing

  (5) wipe off - you'll need that the strict residue on the tree

  (6) reassemble and get started!

  If you are worried about prising off the rotor (or indeed I was wrong) you can undo the radiator all of PCB by unscrewing the screws with springs on them - this allows access to the screw bit to hold the fan. Then you can cancel these abd slide the cable out which means that you can clean the bottom - but the rotor must always be removed to lubricate the bearings.

  Good luck

  Nick

• Pavilion HPE-560z: Pavilion Elite Desktop - replacement of the memory card reader

  Hello

  My memory card reader began acting after 5 years of use. It detects the media all right, I can see the list of files, but when you copy them, the LED will market and file transfer is extremely slow. I would like to replace the card reader.

  Anyone know which internal drive is insert in the case of my hpe-560z Fund? Can we all 3.5 "card reader or there are specific requirements to pay attention to the?

  Thank you.

  Hello

  Please ysé part number from the following link:

  http://PartSurfer.HP.com/search.aspx?SearchText=XX094AV

  who is 575842-001 for Memory card reader-15 IN 1, slot 4.

  You can buy through top of store or try at Amazon:

  https://www.Amazon.com/HP-575842-001-USB-15-in/DP/B004A8JIO2

  Kind regards.

• Compaq Presario S319UK desktop: Replace HHD on SSD

  My hard drive has failed. I can replace it with a SSD then change o/s. The office in question is about 14 years old and I am a silver surfer I would keep runnig if possible.

  Pytor

  Sorry, but in your case, the answer is probably - no.

  Why?

  I'm guessing the age of your PC, the hard drive is an old legacy IDE form factor.

  Take it out and look at it.  IF she has a double row of small pins on the back, it is IDE.

  New readers, who are the SATA form factor, have two pins with strips plastic gold on them.

  SSDS are SATA, not IDE - which means, they do not connect to the same cables that you use for the hard drive.

• Pavilion m9670ch Desktop: replacement of the power supply

  I replaced the original power supply with another more powerful (550W) earlier, I bought a new graphics card. This power is very strong, that's why I bought a new DARK PRO 10 power SUPPLY ATX 550W. Now, the computer does not start. When I press the power button, the fan starts momentarily and stops again. All cables are correctly installed. I reinstalled the old power supply (fort) again and everything works normally (except for the noisy fan). I contacted the manufacturer of the unit from the POWER of DARKNESS, but he referred me to HP, because they did not have a solution, but it may be a peculiarity of the motherboard. What can I do?

  Hello

  Return the Dark Power Pro and get a Corsair CX500, or CX600.

• Microsoft Security Essentials replaces Windows Defender and what is the difference?

  Microsoft Security Essentials has a download of much larger definitions (45 MB) Windows Defender (about 13 MB). That means more MSE WD do? The current definitions of MSE download contains the same version of engine 1.1.5502.0 as the current update of WD. How about a link to MS site to learn what MSE; In addition, compared to the WD curiously enough, can not find such a link on the MSE sites.

  Norton, to less than the latest version, is a Devourer of known resources.
  TeaTimer, I used when children used the PC, because they moved I uninstalled SpyBot.
  In all the years using Windows XP, from time to time the navigation were I shouldn't, I have never had problems. I use F-Secure for the past 2 years, very occasionally run malaware application manually, it never finds anything

• After passing to MSE confiscated the SpamFilter in the bundle of security, it replaced.

  I need a stand-alone ANTI-SPAM filter that works well with MS Office Outlook that is used on our desktops and Outlook Express that is used on our laptops. Free filters are naturally friendly but often required luggage usually included with the 'free' software does pay for a higher quality filter anti-SPAM in general a better deal.

  Recommendations of the real long-term users of the SPAM filter they recommend will be greatly appreciated. Hedge recommendations or the OEM for their own software are not necessary.

  Thank you, JFF

  Hi Jim Favre.

  I suggest you use your favorite search engine and check any third-party application.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Cisco secure desktop

  Hello

  Please need help here,

  I have pre-opening policies configured on my ASA 5520 (9.1. (4-6)) and adsm 7.5 (1)) but I am not able to see the page on ASDM pre-opening,

  screen_shot_2015-10 - 16_at_00.00.56.png

  

  Any suggestion?

  Kind regards

  AM

  You can use Anyconnect 4.x or 3.x with policies before logon. As long as you have installed version 3.x of the hostscan image on your ASA.  You may need to downgrade the ASDM version.

  However being inform security risk on shared bugs previously mentioned.

  It will be useful.

  -Randy-

• Necessary certificate on ASA 5510 for Cisco Secure Desktop?

  I use Cisco Anyconnect "anyconnect-victory - 2.3.0185 - k9" and ASA 8.0.4. I want to just use CSD to prelogin and check a registry key for desktop PC.

  It works fine but I still the newspaper of the SAA this message:

  "Failure of the validation of certificates. No appropriate trustpoints found to validate the serial number of certificate: xxxxxxxxxxxxx, name of the object: cn = CiscoSecureDesktop.

  January 5, 2009 15:00:50: % ASA-3-717027: invalid certificate chain. No appropriate trustpoint was found to validate the string. »

  I need to install a certificate on ASA just to use the CSD module? Or, what is the average to avoid this log message and use a certificate of CSD?

  Thanks for your help.

  David.

  Hi David,

  The question is more aesthetic and does not affect all the features.

  You can view the bug "CSCsr07594", which describes the problem and the workaround in detail.

  Thank you

  Naman

• Enable or disable Secure Desktop based on customer/Clientless

  Is it possible to enable desktop set for connections without client while disabling the AnyConnect client connections it?

  Possibility to turn on/off the CSD by tunnel group (TG) / connection profile will come in future image.

  Then you should be able to put a TG for Clientless with / withour CSD; and anher TG for Client AnyConnect/with/without TG.

  Nelson

• pre-opening Cisco Secure Desktop policies

  Hello

  We just do 2 updates on our asa 5510...

  1. we have improved our ASA 5510 6.21 to 6.41 firmware

  2. we have also improved for the last package of csd

  (we have improved from 3.5.841 to 3.5.2008)

  After 2 refills, it seems that all my policies pre-opening disappeared

  I try to activate / disable the CSD and they won't come back...

  I only have the default policy

  What can I do to get back them?

  any clues on this?

  Thanks for the help!

  You will not be able to recover it, but check to see if one of your old configuration still exists in flash.

  The CSD is stored in a file called "data.xml", there is on the flash of the SAA in the sdesktop directory. You can try to tftp this disabled the flash of the ASA file and see if it contains no remenants of your previous config of csd.

  CD desktop

  dir

  (you should see the file called "Data.xml")

  copy tftp flash:/sdesktop/data.xml

  If when you view this file you don't see one of your old settings of localization of CSD, then I think you'll be out of luck unless you have a copy saved to another location.

  -heather

  Don't forget to note all the messages you help and mark the issue as resolved.