Secure socket tunneling protocol service could not start

Similar Questions

• Error 711 The Secure Socket Tunneling Protocol Service service on Local computer started and then stopped. ." Unable to connect to the Internet

  Original title: I get error 711 when I try to connect to the internet via a UIM modem on my windows overpriced home 7 SP 1

  Did some research and tried manually from the phone, RACM, RACM auto and plug and play services but got error 1068.Tried to start the service SSTP to solve this problem but got the error "the Service of Protocol Secure Socket Tunneling courier on Local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs. »

  I am so desperate and would appreciate helpful suggestions.

  Hello

  1. When was the last time it worked?

  2 did you a recent software or changes to the material on the computer?

  Method 1:

  I suggest you to go through the steps mentioned in the link and the Coachman.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  If the steps is not enough, go to method 2.

  Method 2:

  Ensure that all dependencies of Service Remote Access Connection Manager components are started and set to automatic

  (a) (a) cliquer click on start-run, type services.msc, the, click OK.

  (b) ensure that the following services are started on and set to automatic.

  (c) make sure that the "Startup Type" says "automatic"and has begun.» If it isn't, use the drop down menu to change (under the general tab).

  (d) if she once said: "Automatic", then click on the "Recovery" tab in the upper part and replace the line "First failure" "Restart the Service", then click on ""apply ', then OK. "

  See also:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Hope this helps and keep us posted.

• Error 1079: The account specified for this service is different from the account specified for other services running in the same process. When you attempt to start the Secure Socket Tunneling Protocol

  I try to use my verizon air card, a PC770; VZ Access Manager version 7.2.7.1 recognizes the card very well, but whenever I try to "connect WWAN" I get the following message - "failed to connect - connection not available." Through the verizon forums, I trace this error to the 'Remote Access Connection eating' service that is not started. I try to start this service and receive error 1068: the dependency service or group could start. I have check the Dependencies tab and see Secure Socket Tunneling Protocol. When I go to this service, I see that it is not started, try to start this service result in error in my, title = error 1079.

  I saw many others issues related to the error code 1079, but nothing that she wears on the SSTP service.

  How can I fix it or what additional information is required to help diagnose?  Regards, Paul

  Bud13:
  Dude... May want to lay off the crack for a while before this extreme paranoia Gets the best of you...

  To the OP:

  Just go to the properties of the service you are trying to start, then select "this account".  Browse your computer and find the "Local Service" account  Clear the password so that it is empty and apply.  You will get a dialog box indicating that the account has been given to the connection as a good service.  Then start your service.  This should solve your problem.  I have seen this question many times and there are many, many reasons why it could have happened, but there is nothing to worry.

• disorder in the secure socket tunneling protocol boot

  I need to start 'secure socket tunneling protocol', but when I try to start it is to show that the service has lost since unused for a period of time.

  Hello

  The question you have posted is best suited in the Microsoft Technet Forums. I suggest you to send your requests it for a better response.

  Here is the link: http://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/threads

• NAS SSO service could not started.

  Hello

  I have a problem that I can't start the SSO service on my NAS server in inline mode, but the service works well on my two NAS that are deployed on the OOB mode.

  It gives an error that could not start the service please chk configurations. I checked the logs nas_server.log I get the following error have any idea abt it

  DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOUser = shkcas04

  2010-09-21 12:02:16.997 + 0500 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOUser = shkcas04:DURATION = 0

  2010-09-21 12:02:17.003 + 0500 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOPass = Cisco1234

  2010-09-21 12:02:17.003 + 0500 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOPass = Cisco1234:DURATION = 0

  2010-09-21 12:02:17.008 + 0500 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOKdc = pkshv002.apac.ad.ici.com

  2010-09-21 12:02:17.009 + 0500 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOKdc = pkshv002.apac.ad.ici.com:DURATION = 1

  2010-09-21 12:02:17.014 + 0500 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSORealm = APAC. AD. ICI.COM

  2010-09-21 12:02:17.014 + 0500 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSORealm = APAC.AD.ICI.COM:DURATION = 0

  2010-09-21 12:02:17.019 + 0500 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:save

  2010-09-21 12:02:17.021 + 0500 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:save:DURATION = 2

  2010-09-21 12:02:17.026 + 0500 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:startSSOServer

  2010-09-21 12:02:17.026 + 0500 WARN com.perfigo.wlan.jmx.adsso.GSSServer - server did not work...

  2010-09-21 12:02:17.026 + 0500 INFO com.perfigo.wlan.jmx.adsso.GSSServer - server from the server...

  2010-09-21 12:02:17.026 + 0500 INFO com.perfigo.wlan.jmx.adsso.GSSServer - GSSServer - SPN: [[email protected] / * /]

  2010-09-21 12:02:17.026 + 0500 INFO com.perfigo.wlan.jmx.adsso.GSSServer - GSSServer - construction list kdc for domain pkshv002.apac.ad.ici.com

  [2010-09-21 12:02:18.470 + 0500 com.perfigo.wlan.ssl.SSLLog - RMISocketFactory DEBUG: adding socket: d3c940 [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.92.15.1,port=15873,localport=1099]]

  2010-09-21 12:02:25.695 + 0500 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager TRACE is running: {0.85,0.3, [0:0:15]}: DETECT_INTERVAL = 20:DETECT_TIME_OUT = 300

  2010-09-21 12:02:25.695 + 0500 TRACE com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager has nothing to do... 10.92.15.1:0:1

  [2010-09-21 12:02:25.695 + 0500 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager PATH will sleep: delay of {0.85,0.3, [0:0:0}] = 20000

  2010-09-21 12:02:37.022 + 0500 com.perfigo.wlan.jmx.adsso.GSSServer ERROR - Unable to start server... pkshv002.apac.ad.ici.com

  2010-09-21 12:02:37.022 + 0500 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:startSSOServer:DURATION = 19996

  2010-09-21 12:02:37.061 + 0500 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOState = 0

  2010-09-21 12:02:37.061 + 0500 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOState = 0:DURATION = 0

  2010-09-21 12:02:37.066 + 0500 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:save

  2010-09-21 12:02:37.067 + 0500 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:save:DURATION = 1

  2010-09-21 12:02:39.598 + 0500 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

  2010-09-21 12:02:39.598 + 0500 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

  2010-09-21 12:02:39.603 + 0500 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

  2010-09-21 12:02:39.603 + 0500 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

  2010-09-21 12:02:39.608 + 0500 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader

  2010-09-21 12:02:39.609 + 0500 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 1

  2010-09-21 12:02:39.615 + 0500 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init

  2010-09-21 12:02:39.615 + 0500 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - invoke:

  Concerning

  Waqas

  Waqas,

  From a session SSH on the CASE, can you ping the server and post the answer?

  Faisal

• PDIHWCTL service could not start

  Whenever I boot my Dell M6400 laptop I get the error below in the system event viewer.

  I am running Vista x 64 professional

  It also happens on a different desktop computer Dell 690 running Vista X 64 final.

  I asked Dell technical support but they don't know.

  My computer seems to be working fine, but I would like to understand the implications of this error and corrected if necessary:

  Log name: System
  Source: Service Control Manager
  Date: 2009-03-21 11:00:17
  Event ID: 7000
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: LAPTOPD
  Description:
  The PDIHWCTL service failed to start due to the following error:
  The system cannot find the specified file.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      7000
      0
      2
      0
      0
      0 x 80000000000000
     
      40047
     
     
      System
      LAPTOPD
     
   
   
      PDIHWCTL
      %%d Ko
   
  

  The event long online help directs me to

  http://TechNet.Microsoft.com/en-us/library/cc756344.aspx

  but he does not bring a more light, the error is due to the missing PDIHWCTL file.

  I Googled it, not much info.

  Thank you

  Antonio

  Thanks for the update thread. I don't think that you need to reinstall the operating system; just some programs you installed later and test after each uninstall. MS - MVP - Elephant Boy computers - don't panic!

• The inventory service could not start

  Hello

  We have improved vCenter Servcer 5.x to 6.0, which worked very well.

  As we put it at level ESXi also we close vCenter [a Vm] and brought back, our single sign on Windows domain was also corrupted.

  Now the field is back and vCenter VM, however vCenter Server Service does not essentially depends on Service of the inventory that fails to start.

  On the web console, I get the error "503 Service unavailable (unable to connect to the endpoint: [class Vmacore::Http:NamedPipeServiceSpec:0000000001D6D190] = _serverNamespace / _isRedirect = false _pipeName = \\.\pipe\vmware-vpxd-webserver-pipe).

  All discussions I found see SSO re-registration due to changes in the AD, but they use 5.5 x command that I couldn't find in 6.0.

  There is no SINGLE authentication service in 6.0 too and location of the log files is changed.

  What is the location of the new log file associated with the service of inventory and how to fix this SSO with service Invertory question.

  Thank you

  Hello

  If your vCenter server is on windows, then the inventory service log location is C:\ProgramData\VMware\vCenterServer\logs\invsvc.

  You can check vpxd or vsphere_client_virgo.log for details of the failure. You can share the beam of support for more details?

  Concerning

• A small flag appears on the bottom of my screen that says activate security service Windows, but when I try to turn on it says could not start the Windows security service

  Original title: HELPPPPP

  My computer a little flag in the background with a x... said red it turn security service windows, but when I try to turn it on... it said windows security service cannot be started :/

  Hey ChelseaHarris,

  Take a look at two responses in the thread below the link to see if they allow the Windows launch security service:
  Could not start the Windows Security Center service.

  If these steps do not help, try to run a full scan using the Scanner from Microsoft which can be downloaded using the link below:
  Microsoft safety scanner

  Hope that helps.

• Windows ICS Services stopped & could not start the windows firewall in windows xp professional sp2.

  I am facing a problem regarding the ICS Service & could not start windows in windows Xp service pack 2 firewall, whenever I have install windows Xp Sp2 and join the network, the ics services ceased and the windows firewall. While windows firewall service starts when I restart my computer. But after some time stopped again had services that I'm cold does not access the readers of part, could not access network resources.this problem occurs only on windows xp sp2, when I install windows 7, then all better.i work fetch on different forums, apply the settings but I'm not able to solve the problem on base all the time. Someone tell me the permanent solution of this problem, on a forum, I see this solution,sharedaccess.reg and settings.but I am still unable to find a permanent solution.

  Someone tell me the permanent solution of this problem?
  
  
  
  

  Hello

  Here are a few troubleshooting steps that you can try to solve this problem. See the following links.

  You cannot start the Windows Firewall service in Windows XP SP2

  http://support.Microsoft.com/kb/920074

  Registry WARNING: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see this link:

  http://support.Microsoft.com/kb/322756

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

  http://support.Microsoft.com/kb/875357

  If you have additional problems, please reply to this post and we will be happy to help you further.

• HPWSProAdapter service does not start

  After last MS Security patches application (February, 2013) on a Server Windows 2008 R2 HOSTS, HPWSProAdapter service could not start.

  "The HPWSProAdapter service failed to start due to the following error:

  Service has failed to demand launch or timely control.

  "A timeout was reached (30000 milliseconds) waiting for the HPWSProAdapter service to connect."

  This error is leaving me with some latest status "Device communications error" HP printers because they depend on this service to HPWSProAdapter.

  Any idea?

  Open the registry, go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\HPWSProAdapter

  Change multiple channels environment

  Insert COR_PROFILER = {03191964-0505-1966-BD0E-E92B0C04964F}

  so it will look like this;

  COR_ENABLE_PROFILING = 1
  COR_PROFILER = {03191964-0505-1966-BD0E-E92B0C04964F}
  SystemRoot = C:\Windows

• Hello services did not start, check the sufficient privileges to start system services

  I have a Dell desktop computer - over 6 years running windows xp. I've been using itunes for several years, update without problem until a couple of months ago when I got this error "Hello services could not start, check the sufficient privileges to start system services. I tried to delete everything from itunes etc following the instructions from apple forum - but still get the error. I tried to restart Hello in the service of my computer menu - but now it doesn't show even Hello - I have tried to load Hello - same error... help - I don't want no Hello == I just need the latest version of itunes - now I have nothing. !

  Hello the long beach of dl,

  You need not run Hello service to have iTunes on your computer.

  You can look in the event viewer and see if there are errors on iTunes or the Hello Service.
  By default, the Hello service is started and the startup type is set to automatic.
  The path to the executable file is: C:\Program Files\Bonjour\mDNSResponder.exe. You can search and find this file?

  I find a 3rd party software removal tool and then have it remove all traces of iTunes, including the Bonjour service.
  Use the control panel to uninstall iTunes and software components in the following order:

  1. iTunes
  2. QuickTime
  3. Apple Software Update
  4. Apple Mobile Device Support
  5. Hello
  6. Application of Apple Support (iTunes 9 or later)

  Download the latest version of iTunes for Windows, and then try to install again.

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Services do not start. I get error 5 - BFE, DHCP, & DPS; I get error 1068-IKE, IPsec Service & network list

  Vista Home Premium SP2

  Error 5: Access denied

  Cannot start BFE Base Filtering Engine service

  DHCP Client service

  Diagnostic policy service

  Error 1068: The dependency group or the service could not start

  IKE and AuthIP IPsec Keying Modules

  IPsec policy agent

  Network list service

  Error 1073741288

  Network location awareness

  I checked the forum after forum with no luck.  Any ideas?

  Hello

  ·         What services can you try to start?

  ·         What is the problem you are having with the computer?

  ·         Logged in Administrator?

  ·         You will remember to do recent changes on the computer before this problem?

  ·         Your computer is on the field?

  Response with above information to better help you.

  I suggest you to follow the steps in the link and check if the problem occurs:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/Windows-could-not-start-error-1068-the-dependency/7963d72a-5d73-44fe-8316-058c46235737?page=1

• Windows could not start the Secure socket tunneling service error of Protocol on the local computer 1079 error

  Hello, what can I do to fix this error?

  Hello Mehran,

  1 did you change on your computer?

  I suggest you try the following article and check if it helps.

  Services do not start, and you receive an error 1079 on a computer that is running Windows Server 2008, Windows Vista, Windows 2008 R2 or Windows 7
  http://support.Microsoft.com/kb/2478117/en-us

  Thank you

• Could not start the Security Center Service

  I clicked on Windows security alerts, it showed "The Security Center Service is disabled".  Then I clicked "Activate now", came a "Could not start the Security Center Service" message.  Please tell me what I need to do.

  Thank you very much!!!

  Longpo

  See if these are useful:

  http://support.Microsoft.com/kb/2519899

  OR

  http://support.Microsoft.com/kb/2510301

• Windows could not start the service on the Local Computer Security Center. Error 1068: The dependency service or group could not start

  I use Windows 7 Home Premium

  My windows Security Center cannot be started. I spent to the Microsoft Management Console and tried to launch security through Services Center, but when I do I get the following message is displayed:

  "Windows failed to start the service on the Local Computer Security Center.

  "Error 1068: the dependency service or group could not start"
  Help, please.
  Thank you.

  Hi Rohit Chettri ,

  (I am not good in English)

  I am trying no operation troubleshooting you mentioned. I have it set for myself.

  I clicked on something related to the denfence in the heart of the action and when I restarted my computer is off almost all services. I couldn't even connect to the internet

  I went to the Configuration System (msconfig)-> services-> active tab all services and restart. After that my computer works normally.

  In any case thanks a lot Rohit Chettri.