Security and privacy setting problem

Similar Questions

• I can't open the pane of security and privacy preferences after encryption?

  I followed the installation program from the file vault and when finished I went to the security and privacy preferences pane, I received a message saying that it could not load

  Forget it; It just loaded

• I can't change my security and privacy settings.

  I am trying to install a software, but I can only download "Mac App Store and identified developers." Even after the release, it is grayed out and I can't make changes. When I move my mouse over it, it says that "this option is not available because it is managed by your system administrator. It's not logical because I am the admin of my own computer; Nobody else uses my computer. I've seen other forums on change my password, but I already tried without success. Any help would be appreciated.

  Hello lich51644,

  Thank you for using communities of Apple Support.

  I understand that when you try to change your general security settings & privacy, the part for "allow applications downloaded on:" is grayed out.  This indicates that the padlock in the bottom left of this window is still blocked, then you will need to click the lock and enter your administrator password.  If you don't remember your administrator password, and then follow the steps in the link below to reset.

  Reset the user password in OS X Lion, Mountain Lion, Mavericks and Yosemite

  See you soon.

• forgotten password for security and privacy.  Is there a work around?

  I remember not the password to make changes in security and confidentiality.  I tried all the password I can think of it must be with no luck.  Is there a work-around, or do I have to reinstall OS x.

  Thank you

  Frank

  The administrator password is blank?

  If you have not already tried it, try it.

  https://support.Apple.com/en-us/HT203127

• ORACLE ADMINISTRATION TOOLS - MANAGE SECURITY AND THE VARIABLE - PROBLEM

  To manage security, I use an external "DIM_DMT_PRIVILEGE" table with 3 columns: user, Type and value
  
  I created a block of initialization in the variable management section named 'CATEGORY' by the next expression of inititialisation:
  
  SELECT "CATEGORY", DMT_VALUE_CD
  OF DIM_DMT_PRIVILEGE T
  WHERE T.DMT_TYPE_CD = 'CT '.
  AND)
  High (T.DMT_USER_CD) = upper ('VALUEOF (NQ_SESSION.) THE USER) ")"
  OR T.DMT_USER_CD in ('VALUEOF (NQ_SESSION.) (GROUP)')
  
  The problem is that the initialization state * "upper (T.DMT_USER_CD) = upper ('VALUEOF (NQ_SESSION.)" "USER)") "* success but the other *" or T.DMT_USER_CD in ('VALUEOF (NQ_SESSION.) GROUP) ")" * don't.
  
  In the external table, the column user contain users and groups of users, security groups, and users.
  
  Thanks for your help,
  
  Kevin

  Hello

  In your select statement, you must use the name of the database table columns and not the names of the variables defined in the initialization block.

  Looks like you used the names of variables in a query, if I understand correctly.

  According to my understnading, you must use...

  SELECT DMT_TYPE_CD, DMT_VALUE_CD
  OF DIM_DMT_PRIVILEGE T
  WHERE T.DMT_TYPE_CD = 'CT '.
  AND)
  High (T.DMT_USER_CD) = upper ('VALUEOF (NQ_SESSION.) THE USER) ")"
  OR T.DMT_USER_CD in ('VALUEOF (NQ_SESSION.) (GROUP)')

  It will store these values corresponding to you first two variables defined in the initialization block.

• my security and privacy tabs do not work

  When I click it nothing happens

  Try Firefox SafeMode to see how it works there.
  
  A way of solving problems, which disables most of the modules.
  
  (If you use it, switch to the default theme).

  • You can open the Firefox 4, 5, 6, 7 SafeMode pressing the SHIFT key when you use the desktop Firefox or shortcut in the start menu.
  • Or use the Help menu option, click restart with the disabled... modules while Firefox is running.

  Do not choose anything at the moment, just use 'continue in safe mode.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before using the shortcut of Firefox (without the Shift key) to open it again.

  If it's good in Firefox SafeMode, your problem is probably caused by an extension, and you need to understand that one.
  
  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themes

• I can't find that a description describing downloaded file security and privacy. Resource?

  There is a white paper that explains the lifecycle of document and security?

  I uplaod a file on my account. . Is my account the only one who ever has access to this file, unless I start to share?

  I create an anonymous link. A user clicks on the link and access the file. Is it downloaded on their computer for rendering, or is it rendering at adobe?

  Portfolio files are managed differently?  Should the receiving user create an adobe id? There is additional protection? Adobe password protection?

  Is special software required on the computer of providers (linux, Mac, windows) to read a file?  (Sent by ordinary e-mail portfolios require a recent adobe reader & flash on the destination computer.)

  I link to a specific recipient. Are - those - providers necessary for the creation of an acrobat for access control ID?

  I guess what I'm looking for is a comprehensive product guide.

  Hello! Here are some great questions.

  There is here a FAQ to send Adobe: Adobe send FAQ

  But he does not seem to answer most of your questions - I'll see what I can do about it.

  In the meantime:

  I uplaod a file on my account. . Is my account the only one who ever has access to this file, unless I start to share?

  Yes.

  I create an anonymous link. A user clicks on the link and access the file. Is it downloaded on their computer for rendering, or is it rendering at adobe?

  Preview before the user can see is made by Adobe. The file is downloaded when the user press the download button. We modify the file, but we do virus scanner when it is initially loaded, and we don't download if we detect a virus.

  Portfolio files are managed differently?  Should the receiving user create an adobe id? There is additional protection? Adobe password protection?

  Sorry, but I'm not familiar with the portfolio files.

  Is special software required on the computer of providers (linux, Mac, windows) to read a file?  (Sent by ordinary e-mail portfolios require a recent adobe reader & flash on the destination computer.)

  It takes only a web browser to display the preview of the file. Depending on the type of a PDF document, it is, it can be seen with no Adobe PDF viewers, or if it uses certain features of PDF, it may require Adobe Reader or Acrobat and possibly an updated version of Flash, as you say.

  I link to a specific recipient. Are - those - providers necessary for the creation of an acrobat for access control ID?

  N ° each of them will receive an email with a link to the file, but they do not sign to see.

  I hope this helps! Again, I will pass these for right-wingers to see if these questions and their answers can be added to the FAQ.

• I downloaded macossierra yesterday. Siri is asking me to allow location in settings and privacy, but I can't tick enable locations.  It is grayed out. help is needed

  I downloaded yesterday sierra of mac os.  However, I asked Siri what the weather conditions were in my position. She said that to go into the settings under Security and confidentiality and allow my place.  I did, but I'm not able to check the enable places.  It is grayed out.  Does anyone else have this problem.

  Hello dogsandcats,
  Thank you for using communities of Apple Support.

  I understand your message that you are not able to activate location Services within the parameters of security and privacy on your Mac. I know how it is important for you to be able to turn on location Services. When you go to System Preferences, then Security & Privacy, make sure you click on the padlock at the bottom left and type your admin password. Then you should be able to turn on location Services.

  On location in OS X and Safari Services
  

  Activation of location Services

  Follow these steps to turn on location services in Mountain Lion OS X or later

  1. Choose System Preferences from the Apple () menu.
  2. Click the Privacy & Security icon in the System Preferences window.
  3. Click the Privacy tab.
  4. If the icon of padlock in the lower left corner is locked (), click on it and enter an admin name and password to unlock ().
  5. Select location Services.
  6. Check the box "enable location services".

  Best regards.

• The ad blocking and Privacy Extensions for Safari

  Hello.  I have two questions really.  I often watch videos using sites such as Vodlocker, thevideo.me, GorillaVid, beststreams, streamin.to, vidzi.tv, etc..,.

  1. What are the best extensions to use Safari block ads, menus, embedded, redirects and especially pop-under?  I have AdBlock Plus, but it doesn't seem to block ads and work well with redirects or pop-under.  And Yes, I already have the box checked in my security settings to block pop ups!  (In my experience, it doesn't work well.)

  There are also Ublock, Ka-block!, Wipr, Adamant and Glimmer Blocker I know.  The problem is the Gallery Extension Safari no longer allows the notice of any extension, which is ridiculous.  Not being tilted technologically, I relied heavily on reviews!  For the life of me, I do not understand why Apple has stopped allowing customers.  Ublock caused some sites Web works is not for me.

  2. what privacy extensions work best?  In general, for general use in computer science and in conjunction with ad extensions?

  I would like to find the best combination of ad blocking and security extensions.  Unfortunately, I am not versed with those who is so advanced, requiring the user to enter and write the code to prevent certain types of advertising.  I'm open to hearing all the tips and suggestions!  And thanks in advance to those who take the time to reply and help!

  There are a few easy steps you can take to improve your privacy on the Web.

  In the Safari menu bar, select

  ▹ Safari preferences... ▹ Extensions

  An inventory of the extensions you have installed, as appropriate. A few Safari extensions are adware or spyware. Carefully read the privacy policies or the terms of use. Delete everything that you don't really need, or you are not sure.

  An extension that you may want to install is called "Ghostery." It blocks tracking cookies a lot. Extensions "ClickToFlash" and "ClickToPlugin" prevents Flash content from loading automatically.

  If you have installed hacks supported by advertising as "Glims" affecting the Safari, uninstall them as instructed by the developer. Doing so will improve the stability of Safari, as well as your privacy.

  In the Safari Preferences dialog box, select the Privacy tab. You have the option to delete data, such as cookies, stored on your computer by web servers. You can delete all of these data, or only some of them remove by clicking on the Details button. The other parameters are little explicit.

  On a more advanced level, you can change the DNS servers used by your computer or router, to find the addresses of all the Internet servers that you use. In general, the best choice from the point of view of privacy is to use the DNS servers of your ISP. Your Internet traffic goes through the network of your Internet service provider anyway, so in theory, there is no loss of privacy in the use of its DNS servers. Avoid third party DNS services such as "OpenDNS", which is in the business of selling your information to marketing specialists.

  Consider using software like 'GlimmerBlocker' ad-blocking, which also blocks certain forms of abuse of JavaScript that can be used to track you. It is only suitable for advanced users, and it can block some web content you want to see.

  This comment is not an endorsement of any third party software. Do your own research before deciding whether to use the software.

  When you use a public network such as a Wi - Fi hotspot, don't forget that others connected to the same network may be able to listen to your network traffic. They will not be able to read the content of this traffic, if you connect to Web sites secured like this, but they know the addresses of the sites. It is the same for the e-mail and Messaging. Public VPN services to sell as a solution to this problem, but using these services may have a serious security and privacy implications.

• Security and confidentiality in El Capitan

  I use iOS 10.11.2, and I want to open an app I downloaded before I updated. My system used to ask me if I wanted to open it because it has been downloaded from the internet, but now it gives me this message:

  

  "(l'application) could not be opened because it comes from an unidentified developer." Your security preferences allowing installation of only the applications from the Mac App Store and identified the developers. »

  I tried to change my security settings but when I go in my system preferences and click on 'Security and privacy' he said "Preferences error could not load security & privacy preference pane."

  I also tried to close and reopen the pane of system preferences and restarted my computer.

  I do not change my security preferences before I updated, so I'm 100% sure that this problem was caused by the update.

  Any help would be appreciated.

  CTRL-click it and choose open.

  (137162)

• Who holds the keys for encryption AES mentioned in the table under "security and features iCloud?

  Who holds the keys for encryption AES mentioned in the table under "security and features iCloud?

  Article

  Security and privacy - Apple Support Overview iCloud

  has a useful table in the section entitled Security and features iCloud.

  The table shows the types of keys used to secure the different types of data.

  Apple holds these keys as it may be requested of Apple by third parties?

  Hmmm... You definitely raise a good and valid question to which I don't know the answer to, but if I had to guess, I would say that no one.  Would this be possible?  I know I've heard Cook mention that they "don't hold the keys" but does the same thing, it refers?  It would make a very interesting topic of discussion.

• can someone change my WZC and the setting of security through the internet?

  can someone change my WZC and the setting of security through the internet? I was watching a video on youtube when my stop comp. and restarted on its own. start and my security program was not able to start, had to uninstall and reinstall to turn back. He told me has encountered a problem and that you must close the program and the program would not close. It comes in a loop. Security found nothing. WZC to capture multiple signals, but now I can't pick up a. right extremist to the modem.

  It seems that if you picked up some malware.  What is the full error message on "antimalware executable?

  I would like to cancel the restoration ago 2 months... it's really too long to rely on system restore.  Too many things have been added in the meantime who is affected negatively by the restoration.

  It is very difficult to say anything from the limited information you provided, but I suggest starting by download, install, update and run a full scan with MalwareBytes Anti-Malware.

  In your answer, in addition to providing the full text of the error messages, provide all of the following:

  What version of Windows, including service pack, do you have?
  What antivirus application do you use?  Is up to date? Have you ever let her subscription lapse?
  What other antimalware applications do you have?
  What is the brand and model of your computer?
  What is the brand and model of your wireless router?

• Vista SP1 does not update problems and System Restore returns a message "system restore was not entirely successful. File system and the setting of your computer has not changed"with the error code (0x80071AA7)

  0rignal title: Vista SP1 didn't update problem

  So, recently, I was on my computer of gf and noticed she had some updates, it could use his computer which included the SP1 update.  So I went through the process trying to update his computer and he has been a disaster and have had many problems and seems to have tried everything.  It has a Dell inspiron 1525 and has no CD and no key for its program of Vista.  I burned a Vista recovery disk and tried troubleshooting by using that, but have not had much luck.  When I use the Startup Repair tool there is no nothing.  So I tried to use the restore of the system with the Description of "install: Windows Vista Service Pack 1.  He had a restore point saved just before I tried to update to SP1.  Whenever I chose this method, it's but the whole process then in the end it says:

  "System restore was not entirely successful.  File system and the setting of your computer have not changed. "

  then he begins to list the details with the error code (0x80071AA7) and then gives me the option to close or 'Run System Restore"once again that is an endless loop, because I just end up with the same error each time.  If anyone has had this problem and bring myself through it.  I don't want to reinstall windows because it seems simply ridiculous and plus that she a lot of pictures on his computer and I want to get rid of those.

  If you need more information please let me know and evil provides everything I can

  Hello
   
  Follow the steps and check if the problem persists.
   
  Step 1:
   
  I suspect that your security program may be responsible for this. I would suggest you temporarily disable all security software and try the system restore.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note : Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Step 2:
   
  As for installing updates is concerned, I you should install them after you put your computer in aclean boot State. There could be a third-party software in conflict with updates. Clean boot helps eliminate these conflicts.
   
  Note: Restart your machine as usual by following step 7.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• RE: iOS iPhone 6 s 10 how l remove or disable the slippery camera from outside the locked screen? This feature is a security and threat privacy for me.

  RE: iOS iPhone 6 s 10 how l remove or disable the slippery camera from outside the locked screen? This feature is a security and threat privacy for me.

  You can not. However, I'm not sure why you think it's a privacy or security threat. The only thing that can be accessed without unlocking the phone is the camera to take pictures. No one can access your data already on the phone.

  You can send feedback to Apple here:

  http://www.Apple.com/feedback

• I have the time to default iPhone 4 iOS 7.1.2 iPhone App not updated since the last 3 days and also checked all the settings for location and also set as new iPhone always present problem... Please try to fix... Thanx

  I have the time to default iPhone 4 iOS 7.1.2 iPhone App not updated since the last 3 days and also checked all the settings for location and also set as new iPhone always present problem... Please try to fix... Thanx

  Turn off your device and turn it on again. If this does not help, sign out of your account and reconnect.

  In addition, you can try to reset your settings.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings