Security Essentials not on when I turn on laptop? Win7
Not sure if I posted this in the right forum. I just noticed this. When I turn on my computer 2 years of the old MSE tray laptop Acer Travelmate Win7 lower right icon is red but after all programs load finally turns it green.
I thought that programs remained on the merits even if the laptop is turned off. My AVG stays on I think because it's still ok under tension.
Programs do not remain in the background when the computer is turned off. After the start, all background programs must restart and load to new charges, which takes a few minutes after the first start-up and connect.
It is one of the reasons why it is faster to stop but just use sleep instead (as a phone mobile modern just goes to sleep when you don't use it, not completely turned off).
Tags: Windows
Similar Questions
-
dose Microsoft security essentials not to see the place but mcafee has always said he's here
dose Microsoft security essentials not to see the place but mcafee still says he's here, because of this I can't install or uninstall completely either.
What is your level of service pack? If you are unsure, check by simultaneously pressing the keyand of windows logo button pause newsletter.
BTW, please uncheck this as replied, if the matter is not resolved. Thank you
-
Windows 7 when I turn the laptop it says check cable connection pxe - mof: outgoing intel pxe rom no boot device insert boot disk and press any key
Hello
1. What is the brand and model of the laptop?
2 have you made any changes to the computer before the show?
Method 1: Change the boot order in the BIOS settings:
See the following steps:
Important: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
(a) start on typing Dungeon either F1, F2, F10, Esc, or DEL to enter the BIOS Setup.
Warning: some manufacturers use F10 for recovery of the system.
(b) glance to "Drive Configuration", "Boot order" or similar
(c) check the second drive the first boot device CD/DVD and hard drive.
(d) to save the settings and exit.
Method 2:
Step 1: Trying to boot into safe mode and see if that helps.
Start your computer in safe mode:
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
If step 1 work, try step 2
Step 2: A clean boot to check if startup item or services to third-party application is causing this issue.
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135
Note: when you're done to diagnose, follow step 7 in the article to start on normal startup.
-
I just formatted my laptop and every time I try to intall service pack 1 for windows vista as it gets installed but when I turn the LAPTOP works again it ask me to update? What should I do
Hello
Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.
It will also tell you here what Service Packs, if any, are already installed.
Then, choose the download of 'bit' OK to use to install Service Packs, first of all the installation of SP1.
Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30
Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299
Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468
Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669
And if you have any problems:
There is a Forum that Microsoft has put in place for problems with Vista Service Packs. If repost you the Forum they will definitely try to help you here...
http://social.technet.Microsoft.com/forums/en/itprovistasp/threads
See you soon.
-
I had the ' Vista Anti-Spyware ' Trojan horse to visit a web site. Why Microsoft Security Essentials does not detect the Trojan horse? He diverted Security Essentials and rendered inoperative.
Hello
you will need to ask this question about MSE in the Microsoft Security Essentials Forums the link below
http://answers.Microsoft.com/en-us/protect
Here's how to remove this Malware
Read this information
Vista anti-virus 2011, Vista Total Security 2011, Win 7 Home Security and include some of the names by a rogue new name change randomly to settle on the victim's computer. When this particular rogue is installed, it will install as a variety of names in different programs, with each having their own graphical user interface according to the version of Windows running on the computer. Whatever the name, however, they are all the same exact program with just a different name and skin on this subject. This rogue goes by many names in different programs, of which I have listed below depending on the version of Windows that is installed on:
Windows XP rogue namesNames of Windows Vista RogueWindows 7 fake namesXP Antivirus Vista anti-virus Win 7 antivirus XP Antivirus 2011 Vista anti-virus 2011 Win 7 anti-virus 2011 XP Anti-Spyware Vista Anti-Spyware Win 7 AntiSpyware XP Antispyware 2011 Vista Antispyware 2011 Win 7 antispyware 2011 XP Home Security Vista Home Security Win 7 Home Security XP Security 2011 Home Vista Security 2011 Home Win 7 Security 2011 Home XP Total Security Vista Total Security Win 7 Security Total XP Security 2011 Total Vista Total Security 2011 Win 7 Security 2011 Total XP security Vista security Win 7 Security XP security 2011 Vista Security 2011 Win 7 Security 2011 XP Internet Security Vista Internet Security Win 7 Internet Security XP Internet Security 2011 Vista Internet Security 2011 Win 7 Internet Security 2011 Follow the EXACT below removal instructions
http://www.bleepingcomputer.com/virus-removal/remove-win-7-Internet-Security-2011
-
my iPhone will not change when I turn it
My iPhone won't view when I turn it. Is their adjustment I can make?
The rotation lock is active?
If the screen does not turn on your iPhone, iPad or iPod touch - Apple Support
-
Please due reply
Hi hrithikroshan
As the device does not work correctly when you turn it on I suggest you to contact Samsung support and check. Please refer to the below link mentioned for assistance.
I hope this helps.
-
I have a problem with the security warning every time when I turn on my HP netbook
What should I do to not appear the next time this window? I always Cancel but it appers again and again when I turn on my HP netbook.
Hello
Hello. I can see the picture now. Please check this first
It is much safer to download from Microsoft source rather than unknown. You can also repair Windows using the installation CD/DVD.
Kind regards.
-
Why a black line does not appear when I turn it on, but goes off when I start a program
When I turn on my machine, I get a vertical black line on my back drop. When I select a program the line disappears. Can you please help me with this problem. Thank you
Hello Georgehebden,
Thanks for your post. Try to start computer in Safe Mode with network and download / install the latest video driver for your computer. Please let us know the results so that we can better help you get this issue resolved.
See you soon
-
I am running Vista Home premium, this morning, I opened Hotmail and froze my system (on my laptop). I went to stop it. When I started again, he came there an inconsistancy in one of the discs, so that a disk scan had started. When he finished my system would not start. He turns, goes through the first page with the little bar on the bottom, then turns black, the windows symbol rises, the symbol of the manufacturer comes up, then a blue screen showing the configuration of updates: part 3 of 3-0% complete, do not turn off your computer. Then the process is repeated. Any help would be appreciated I need pictures of her. This is the only place that I have pictures of my mother to before she died. If there is no way to get my laptop, is there a way to recover photos?
Thank you
Shelley
Hello
I suggest you try the following Microsoft article and check if it helps.
An update is not installed successfully when you try to install the update in Windows Vista and Windows 7: http://support.microsoft.com/kb/949358
Note: Method 2 in 949358 KB (in the Microsoft article mentioned above) talks about safe mode.
If you are able to boot to the desktop in safe mode, you should be able to save all the pictures.
Hope the information is useful.
-
My laptop worked fine when I turned it off for the night, and when I come back to use it the next day, that windows Explorer has stopped working when I turn on my computer. My whole office is empty, including my wallpaper and I can not enter in 'my computer' and 'my documents '. The Task Manager works and I can run iexplore.exe and other programs.
Here are the details of the problem
Signature of the problem:
Problem event name: InPageCoFire
Error state code: c000009c
Type of media loopholes: 00000003
Name of the damaged file: explorer.exe
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 1042
Additional information 1: 559f
More information 2: 02934d2c52b3f39550891518a9d15746
3 more information: 6ef5
Additional information 4: b5d88008fbc27fee13f30131eedf2314I run on Windows vista 64-bit
Hi shellysong, I suggest you follow troubleshooting steps from the method below. Method 1
Step 1
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Step 2
I recommend you perform the clean boot.
See the link below to learn more about how to clean boot.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
Click Start, type msconfig in the search box and press ENTER.
If you are prompted for an administrator password or for confirmation, type your password, or click continue.
On the general tab, click the Normal startup option, and then click OK.
When you are prompted to restart the computer, click restart.Method 2
Try the SFC scan on the computer.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
-
Hello
I have lenovo ideapad z510 supplied with windows 8, then I installed ubuntu 13.10 on it. But whenever I turn my laptop on ubuntu brightness set to 0 & I have to manually adjust.
How can I exit ramp it s.t., there it is.
Jugal Hi, welcome to the forum.
Since your question was related to the Ubuntu, you must send your request here:
http://forums.Lenovo.com/T5/Linux-discussion/BD-p/Special_Interest_Linux
Also, when in this thread, use the search above and enter 'brightness', as it seems to exist some solutions already in there.
See you soon
DragonRider
-
When I turn my laptop on my screen lights. Why?
My laptop has become lately a little cranky. Sometimes when I turn it on the screen won't turn on. I have malware and spyware protection for my laptop. I just need to get my updated antivirus protection. It expired 15 days ago. Was having a hard time is done. This happened to me once before. What is the problem with my laptop? Is this serious? How can I fix it?
Hello SadGirl1,
If it is an intermittent problem with the laptop screen, my recommendation would be to contact the manufacturer of your computer, because it seems that your screen is out.
Best regards
Matthew_Ha
-
I have a computer gateway laptop and when I turn it on, I have to either wait for the screen to appear or for my laptop to connect to internet, I tried several different things, and none of them seem to work.before id turn on my laptop and within seconds it would connect, now it seems that it takes forever to connect. Thank you
Hello
1. any hardware or software changes made recently before the problem?
I suggest that you follow all the steps in this article to resolve the problem.
Optimize Windows Vista for better performance
http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance -
can someone me, help the sound icon on the bottom of my scree of the computer doesn't work, when I puch the bar until you get sound on my computer, it just goes back to zero all the time...
Hi JacquelineStueck,Parameter by default on your computer would be to reduce the volume when inbound communications are detected.a. change the setting in your control-> Sound-> Communications tab panel ' doing nothing '.b. click on apply. Click OK.If this does not help, perform the clean boot in order to identify the request at the origin of this problem:Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
Additional reference on:
Tips for solving common audio problems
http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems
Maybe you are looking for
-
I trtied to go in run and ensure that the BITS and the automatic updates service are started maje everything he said to do and always attack, no chance I downloaded multipoint pack 3 on a stick with updates, but don't know where to go t oinstall it i
-
Could not find photos and documents after reinstlling windows
I have rInstaller windows with the provided installation disc with a computer, after installing all my programs, photos and documents had disappeared. How can I find them?
-
OPU Test doesn't have a DVD - RW drive: HL-DT-ST DVD +-RW GT32N
It's been a while since my dvd - rw drive stoped to function as it was supposed to. I never thought about it until today.So, I did the test and it says "Test of OPU - failed". What it means? I put something in the drive, it goes on and then my pc say
-
Download a firmware up to date.
Tried to copy a MVD Visual would not download. Received a message that I need to date the firmware for dvd / player. Don't know how to do it. I've set up automatic downloads. What I would do.