Windows xp. I restored my computer and after the restoration, it would not load the updates of windows.

Similar Questions

• Updated Windows rebooted my computer and installed the updates last night and now my login password is different and I can not connect. Help?

  I put my computer to sleep last night and when I woke up this morning it has restarted and was sitting on the login screen.  This occurs when windows update itself - and I absolutely hate it by the way.

  When I entered my password, it says that it was incorrect.  I had the same password for a long time, so the only thing I can think is that the update of windows somehow changed my password.  I have Vista Ultimate 64 b.

  I did not create a password recovery disk - how can I get my account to change my password?

  Hello

  It is available on you microsoft information help on problems with passwords

  http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  ________________________________________________________

  except that we cannot help you

  read this microsoft's policy NOT to provide assistance to crack passwords when they are lost or forgotten:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

• have photosmart b110a and after the update, it will not print or scan to my office

  have recently bought photosmart b110a and connected wireless for desktop (windows xp) and laptop (windows 7), but after an update is, it prints from the desktop - have deleted the software but left driver installed to try to remedy the situation and made the restoration of the system

  Hi there caleso,

  This is probably a software bug somewhere lets try to download and print and scan running doctor located here:
  http://support.HP.com/us-en/document/c03275041

  It can fix its own much and if not to give a better idea of what is happening.

  Good luck!

• Major problems after the update to 10.11.2

  Hello

  I have a 2009 MacBook pro environment. I'vewalkways updated to the latest osx and have never had any problems. Since the update to El Capitan my computer worked really slow. I deleted all the old files, uninstalled I don't use and move all the files on a hard drive current of the program. With the first update to El Capitan, it would take 10 minutes to activate and load up, slow but manageable.

  Since the 10.11.2, update I have been practically impossible to use my computer at all. Now, it takes 25 minutes to activate and load up. Once its loading I can barely click an icon before her color of the wheels. It will charge finally something at the end of 5 minutes, but basically the computer is useless.

  IM wondering if anyone else has had similar with El Capitan and the problems that people would be advice to me. I plan to downgrade to Yosemite, as I had no problem then, but I've never done anything like this before, and I'm worried it will more mess my computer and then I will have no computer at all? I need to create a USB key with Yosemite on and then erase the Mac HD before reinstalling with Yosemite. I am naturally cautious but want to do what's best for my computer working again.

  Or would it be best to reinstall El Capitan and hope this sorts the problem?

  Thanks in advance

  Try these in order to test your system after each see if it is back to normal:

  1. a. reset the PRAM and NVRAM on your Mac.

  b. Macs with Intel processors: reset of the controller (SMC) system management

  2. restart the computer in Safe Mode, and then restart again, normally. If this does not help, then:

  HD recovery start: restart the computer and after the buzzer, press on and press and hold the

  COMMAND and R keys until it appears the Utilities menu screen.

  3 fix the hard disk and permissions: select startup drive in the Utilities menu utility. Fix the hard drive and the permissions as follows.

      When the recovery menu appears, select disk utility and press the continue button. After loading disk utility select it

      back from Macintosh HD entry of the list on the left.  Click first aid button in the toolbar. Wait for the operation

      ends, then quit disk utility and back to the main menu.

  4 reinstall OS X: restart from HD recovery Select reinstall OS X from the Utilities menu, then click on the continue button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than wireless.

  
  

• If I buy windows 8 (any OS windows) now and install in my computer and after a year when I change my computer, can I install the SAME operating system in the new computer?

  If I buy windows 8 (any OS windows) now and install in my computer and after a year when I change my computer, can I install the SAME operating system in the new computer?

  You can if you buy a commercial box full of Windows 8 version.

  If you buy a computer with Windows preinstalled, or a version OEM of Windows 8, 8 No, you can't.

  If you buy a version upgrade, you can, as long as the new computer has a licensed version earlier of Windows on them.

• HP Mini 210: Palm Desktop (see 6.2.2) lost address book during and after the upgrade to Windows from December 10

  The problem is not with the HP Mini. This computer is running Windows 7 Starter and he Hotsyncs perfectly with my Tungsten C handheld. The problem is with a Dell Vostro, but because it is a problem of Palm, I hope you can help.

  My Dell Vostro has been upgraded to Windows 10 in September. I had a few problem get the Palm to synchronize at this time, but I thought her and successfully synched bases Memo, address and the Date of all the way up to 10 Windows update that Microsoft pushed around Christmas.

  The first Hot Sync attempt after the update given my address book disappear from desktop ONLY (running version 6.2.2) and I was not able to find a way to restore the address book on the desk.

  Handheld still works fine. As I said the HotSync with the HP Netbook (Windows 7 Starter Edition) and I would like to continue to use it as long as ITO still works.

  Try using the Import/Export built-in in Palm Desktop.

  On the PC that contains the data, go to File/Export (while the address book is open and being viewed).  This will produce a file that you can copy to the Dell PC.  Use a flash drive, Cloud Computing service, card SD - it doesn't matter.

  On the Dell, go to file/import and locate the file.

  Windows 10 has caused some 'quirks' to appear in Palm Desktop.  We learn that we will!

  WyreNut

• After the update and restart my computer was like a whole new vista version and the version of office business. All files and emails and contacts and other programs have disappeared!

  I did a system restore to run today.  He had updated 8 minutes before all this happened, but I couldn't say what update caused this.  It's important, so I guess that vista.  All of my Web site and software adobe software for forms and emails, files, photos, everything disappeared as if today, I bought the computer Office exccept was there, but empty. I have even been asked to set up an e-mail account.  I don't know how it happened with an update and cannot lose another day to such a waste of time. I work and am finishing my doctorate so the stability of my work being it is quite serious.  How this happened and how can I keep it doesn't happen. I backup to carbonite.com and have now checked, contacts, emails by the intermediary of today and all the files, but it's scarYYYYY!   I was never warned or the ability to restart or given in error messages.

  Hi Kelly Barr.

  Welcome to Microsoft answers forums!

  Are you referring to (files, emails, contacts and other programs) shortcuts on the desktop?

  When updates are installed on the computer it says system files, this process of service not Microsoft that are running in the background can conflict with updates and tour damage the system settings.

  This problem can also occur if system files are corrupt.

  Try the following in order to recover the desktop icons.

  Even though the desktop icons disappear, the programs are still installed on computer you can launch them.

  Method 1:

  Ø, right click on the desktop

  O select view

  Ø, click show the desktop icons

  Method 2: Click the Start button > select programs > verify if all the programs installed on the computer display > try to start or right click on the program and Select create a shortcut

  Check the updates that triggered this question go by the date.

  1. Click for Start > Control Panel > Classic view > Windows Update.

  2. along the top, click view update history.

  Before you install updates, follow the precautionary steps listed below.

  Step 1: Disable the security software on the taskbar

  Note: Activate security software once theupdates are installed.

  Step 2: Disconnect external devices like printer and scanner, except the mouse, keyboard, and internet connection.

  Step 3: The clean boot computer:- Perform a clean boot (check step 1 in the link)

  http://support.Microsoft.com/kb/929135 ---> how to solve a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup after you install updates. Follow step 7 in the link.

  Try to install updates via windows update or you can also download and install the updates manually by accessing the Microsoft Web site.

  Data backup on the computer

  You can use backup and Restore Center integrated in the operating system to back up data.
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  Thanks and greetings
  Ajay K
  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• After the updates of windows, the computer stops responding with a black screen at startup of the system

  Original title: Windows XP does not start after the update, no error message

  Has made no changes to the system, but the last thing that happened was an update of Windows security on stop.

  Now when I boot, the BIOS p.o.s.t. shows good HDs, good DVD-Rom, RAM, but Windows never starts, goes just a black screen, HDs are not accessed.

  -F8 does nothing, can't use the last known good Config or Mode safe

  -Change boot order in the BIOS to boot from the Windows XP DVD, hoping to get the recovery console, but the same thing: black screen, no attempt to spin-up DVD or HDs.

  -Removal of mobo battery to reset the CMOS, no joy.

  -Checked and re checked all connections inside.

  -Stripped devices and added one at a time, no joy.

  -Traded-in an old video card in case it was difficult to generate the higher res gfx, no joy.

  I was construction/upgrade / repair my own PC for 3 decades and can usually solve the problem and fix it myself, but this one me completely baffled.

  Any suggestions?

  Hi Cougarific,

  We recommend that you repair your Windows installation in according to method 2 of this article and check the result.
  See computer stops responding with a black screen when you start Windows XP
  

  Note: When you perform a repair installation, it restores the current installation of Windows XP to the version on the installation DVD. This requires you to reinstall all updates that do not appear in this version of Windows XP disc.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My computer was not restart and I did a restore of the factory system, and it would not load the new screen?

  My computer has been restarted not and I have to click the button 3 or 4 times just so he can work. I use it for school so I really need to work and so I did the system back restore to the factory settings and it did again when the screen would not load but now it works. I left it only after I did 8 hours? that is the problem or do I do it again? I mean restoration?

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if you can doot:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:
  Try to perform the verification and startup repair if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  It will be useful.

• After the updates of Windows 7 computer does not start

  I received a notice from the system Windows 7 updates have been downloaded and available for installation. I selected the installation of updates. After the updates when installed I was in charge to restart. The computer will not start at the top. It tries but stops at a blue screen with a cursor. I tried to boot into "safe mode" and get the same. I booted from my original Windows 7 disc and I went back to my restore point before the update. It appeared to restore successfully but I still get a blue screen.
  What is my next course of action? I certainly DON'T want to format the drive and start again.

  The only thing I can say is that I know that you will not like to hear.

  It is to re - install Windows 7 (do not enter the product key and uncheck the 'Activation').

  Then immediately turn off automatic updates.

  Then, go to the Microsoft Update site and only install one update at a time (make a note of the number KBXXXXXX), restart and check that you do not get the blue screen. Then download the next update and repeat the process until you either find to have installed the offending update or updates without any problem. If all goes well and the problem did not repeat, then you can activate Windows.

  If you find yourself always with the blue screen after a given Update call Microsoft and tell them. If they won't listen, then create a new post on this forum, making reference to the question of the blue screen AND the number associated with the update. Also post the number here if I can do some research on the problem.

  JS
  http://www.PAGESTART.com
  Never be afraid to ask. This forum has some of the best people in the world to help.

• Computer freezing after the latest updates of Windows

  Unfortunately the windows restore has no restore points and was not yet active.  AAAAAAHHHHHHH.  I just got this computer last month and it's been great, and now I'm back to being a tech.  Large.

  Hello

  ·         Who were the latest updates installed on the computer?

  ·         The computer hangs or crashes the browser when it is on YouTube?

  You can check the same thing using the link below.

  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  You can try to uninstall and reinstall the updates manually and check if this helps solve the problem.

  http://Windows.Microsoft.com/en-us/Windows7/remove-an-update

  To install the updates:

  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  Check if there is information in Event Viewer which may help us to solve the problem:

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to disable a license of Windows 7's Home Premium on a dead computer and activate the replacement

  I had bought a copy of the Family Pack Windows 7 Home Premium Upgrade retail and had activated the license on 3 computers. One of the computers suffered a power surge and had to be replaced. I did and installed a copy of Windows XP Professional, I had and then installed the upgrade to Windows 7 but it does not allow me to activate Windows now indicating I had exhausted the licenses. How can I deactivate the license on the computer now dead and transfer it to the new?

  No need to just remove the hard disk from the dead computer and if the drive is still functional:

  (1) copy the data files, you can keep.

  (2) to format the drive for someone else cannot retrieve your product keys.

  Now before you do the steps above after activate Windows by phone.

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone

  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  How to contact a Microsoft Product Activation Center by phone
  http://support.Microsoft.com/kb/950929

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Register Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/register
  Register Windows 7 and you automatically receive a series of three welcome to Windows e-mails
  filled with tips, creative tips and other information to you help get the most out of Windows 7.
  You also get a subscription to the monthly newsletter of Windows Explorer,
  where you will find other tips and tricks, as well as special offers.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048

  Learn about Activation:
  http://TechNet.Microsoft.com/en-us/library/ff793423.aspx

  J W Stuart: http://www.pagestart.com

• Constant freeze (on IE9 and mozilla and media players) after the updates of windows, please help?

  Hello

  I have a bit of a situation, which I believe can be due to windows updates. I'm not very experienced with computers, but I know that I have no viruses on my computer, or malicious software, and I have corrected all the mistakes of registry. I have a dell xps l702x, i5 2.4 GHz, 8 GB of RAM. I had this problem for over 2 months and I just ran out of options on how to solve this problem. I reinstalled windows 7 all about 3 times over 2 months, and I have an idea about what's going on. My computer's internet browsers, which means of IE9 and mozilla firefox keep freezing when I use them. I tried to use internet explore with no. Add ons, without success, as well. I have a few movies downloaded, to freeze when I try to play them in VLC Player. When I re-installed windows 7, I used my pin code files for install base running programs. After windows updates (which were just of securities system and IE9) I started having the gel. It seems that some program moves data to and from the hard disk are the culprit. If I opened IE9 and it loads the homepage, if I move my mouse it freezes instantly, without ctrl + alt + delete to help me.

  Help, please!

  Do not use the programs OWN more.  They do little good and can cause problems.  What may happen, it is that these programs can find registry entries that do not appear to be used, then remove them.  MS has put some of these here for future use, and when the updates come and try to use entries that has removed the vacuum cleaner, you encounter this kind of problem.

  It is also possible that you may have an overheating or other related materials the problem, but if you have used a cleaner program, I would try to reinstall and do not use it to see what happens.  If that does not resolve the problem, you can check the time with SpeedFan, run the memory diagnostics, run drive Diagnostics, run chkdsk, etc., but reinstall without the program cleaning everything first.

  Also, you need only to download drivers from Dell, not Intel or update MS or anyone else.  This is another way people get into trouble.

  Good luck.

• Hi - I have an old Adobe Audition 1.5 and I used to be able to hear that I was recording. After the update of computer and reload Adobe Audition 1.5, can no longer hear the recording, but only on playback. Please notify.

  Hi - I have an old Adobe Audition 1.5 and I used to be able to hear that I was recording. After the update of computer and reload Adobe Audition 1.5, can no longer hear the recording, but only on playback. Please notify.

  Monitoring is done through your audio device, no hearing. When you updated your PC, playback of the audio device settings would have been reset. One of them includes the follow-up of the input jack, and that's what you need to restore. Since we do not know which audio device you use, it's all that we can tell you, except that if it is a device internal, you will need to open the volume control options and he change it. It depends on the good OS versions...

• persistent app of the fragments-i-drive placed a persistent frag of cookie or app on my computer and after removing the disc it always opens whenever I start. Anyone know how to uninstall or delete it?

  fragments of persistent app-

  i drive placed a persistent frag of cookie or app on my computer and after removing the idrive with CleanMyMac3, it's always the opening whenever I start. Anyone know how to uninstall or delete it?

  Rid you MBP od CleanMyMac3.  It is not necessary and can damage your system.

  Try Malewarebytes Anti-Malware for Mac:

  https://www.Malwarebytes.org/Mac-download/

  Ciao.