Security problem - no security not defined but not, users can save form

Similar Questions

• How I replication address the security of transport (or how users can implement custom replication transport)

  I would like to put in place strong mutual authentication and encryption for replicated data and manage it in the application controls. (That is, not by using a VPN connection or other mechanism of the application could not apply on its own.)

  It would be nice if I done this sort of thing automatically, but in the interest of flexibility and simplicity, it seems it would be reasonable that I to allow a user to managing low-level message passing and sleep with any security or integrity checks which were appropriate.

  Is it possible now?  It seemed that there was a level of support for transport provided by the user in the past.

  To add to the remarks of Marc, there was some thought and effort put into the pluggable teapot, but there have only been a start in this direction so far.  I think it would be possible, for example, add support for Kerberos and secure transportation provided by the user in the future if that made him highest on our list of priorities.

  You have a specific need for an alternative implementation of security beyond (rightly) pointing out the merits of a pluggable approach?

  -Tim

  P.S. I think we used 'SSL' rather than 'TLS' to match the name in the JDK classes and to use terminology better known to the general public.

  P.P.S. The NoSQL product layers also its own authentication mechanism of client on top of the SSL part.

• the administrator cannot access programs, but guest user can

  When I am logged in as an admin user can't access programs, it happens that the program does not exist. When I try to go on internet with Explorer he asks me what program I want to use to access the internet. If I change my user and just go as a guest he let me go on the internet with no problems and have access to all the programs on the desktop. also, when I am logged on as administrator a lot icons in the toolbar have disappeared. It's as if the admin is blocked for doing things, but a guest user can.
  Thank you

  Hello

  The computer seems to work fine in safe mode. The diagnostic mode disables all third party software and services that run in the background. To emulate a similar situation in normal mode, you can run clean boot.

  To perform a clean boot on a computer that is running Windows Vista, follow these steps.

  1. click on start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after starting the computer, reinstall and run the program and see if the problem is resolved.

  Check if you have the same problem... If your issue is resolved, follow the how to determine what is causing the problem section in KB article to narrow down the exact source.

  http://support.Microsoft.com/kb/331796

  To restore your computer to a Normal startup mode, follow these steps.

  1. click on start in the box start the search.

  2. type msconfig and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  3. click on the general tab.

  4. click on Normal Startup - load all device drivers and services and then click OK.

  5. When you are prompted, click on restart to restart the computer.

  Concerning
  Anthony.

• My meniu in Photoshop CS6 Extended is very small.  I really need to find a way to solve this problem; It is not user friendly at all... I have a new

  Does anyone know how to solve the problem of the very small menu in Photoshop CS6 extended on a computer in high definition?  Need help please, it is not very user friendly at the moment.

  Thank you..

  Hello

  Photoshop CS6 can't stand the Hidpi monitors. To change the resolution of the screen 1920 * 1080.

  Microsoft to change the screen resolution, please follow this link: http://windows.microsoft.com/en-in/windows7/change-your-screen-resolution

  Thank you

• My computerwas hit by 3 virus trojan dropper, windows security deleted them, but now I can't start or have access to the shared program windows internet

  After removing the virus, I'm more able to send the outgoing signal. The computer says that it cannot open the windows firewall internet connection sharing service. The message is related service is not running. I went into msconfig file and everything seems to work here. Short of wiping the hard drive and reinstall everything, I ' at a loss as what to do then. Thank you

  If you mean that you see a message like this:

  Cannot start service Windows Firewall/Internet Connection Sharing (ICS) on the local computer.
  Error 1068: The dependency service or group could start.

  This means that some Services depends on firewall Windows do not run (and they need to do).

  The Windows Firewall Service has two dependency Services that should run until it begins:

  Network connections
  Windows Management Instrumentation

  Click Start, run and enter in the box:

  services.msc

  Click OK to open the Services applet.

  Locate and try to start the network connections and the Windows Management Instrumentation service.  If they do not, check their dependencies too to ensure Services that they depend on run.

  Right click on each Service and ensure that properties startup type is set to automatic and save all changes.

  Restart and get back in Services and see how things look now.

  Since you have had, or still may have a malware infection, I would follow with doing this:

  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• Bridged Networking problem - comments may be crazy, but nothing else can connect

  I have a few bridged networks confusion works correctly under VMWare Workstation 11. Installation is VMWW running on a Windows Server R2 2012 host with a Ubuntu LTS 14.04 server prompt.

  Windows Server has a physical NETWORK adapter that is configured with two IP addresses.  For the sake of argument, that I will call the first IP 1.1.1.1 (255.255.255.192 subnet mask) and the IP secondary 2.2.2.1 (netmask 255.255.255.224).  Real IP addresses are all publicly routable.

  In my computer, the network configuration is set to "bridged".  Inside of the Ubuntu VM, networking is defined as follows:

  2.2.2.2 IP address

  255.255.255.224 subnet

  Gateway 2.2.2.1

  I can ping successfully the Ubuntu prompt from the Windows Server and other computers on the Internet, but cannot connect to any other service on the client (for example, SSH, HTTP, etc.), either from the host machine or any computer on the Internet. Note that both hosts and guests have their respective firewall disable for the moment.

  However, if I change the VM network config in my computer to be "NAT" and set the networking of Ubuntu on DHCP, all services on the client are accessible on the host Windows (for example, SSH, HTTP etc.) via a 192.168.x.x dealt with this workstation DHCP assigns the guest.

  I'm a bit puzzled as to why these services would be accessible to the NAT address, but not on the static IP address public when the latter may be ping from the host and other machines?  Any suggestions would be greatly appreciated.

  OK, managed to solve it with a violin.  The resolution was to create a new virtual network adapter in the virtual network Editor.  It has been bridged, with the physical NETWORK adapter selected in the drop-down list 'Bridge '.  In this case, this has created VMnet2.  Then in the VMWare Workstation GUI, I edited the network adapter settings to select VMNet2 in Network Configuration options.

  No idea why it did not work with VMNet0 at first, but still...

• Rich Table: entity validation fails, but the user can change the record! : O

  Hello
  I develop with JDeveloper 11.1.2.1.0 and I have the following problem. I have a rich table editable according to entity/view with a line entity level validator method that checks the consistency of rank according to custom rules.
  I noticed that if the validator fails, the error message is displayed correctly, but it is possible to move to a different folder and this causes a lot of problems. I need avoid recording of variation when this validator fails. I know there is a way to block navigation on an element using clientListener and javascript, but it's a different need because I don't want the user to change the recording while the validator fails.
  How can I do?
  Thank you
  
  Roberto

  Roberto R SCC wrote:
  I noticed that if the validator fails, the error message is displayed correctly, but it is possible to move to a different folder and this causes a lot of problems. I need avoid recording of variation when this validator fails. I > know there is a way to block navigation on an element using clientListener and javascript, but it's a different need because I don't want the user to change the recording while the validator fails.
  How can I do?

  When you change a line, it is the currentRow on the iterator. You do not want any line to become the currentRow.
  I would go to this topic, in this way: substitute the selectionListener table and the listener to custom selection, check if the current currentRow (the one you are editing) isValid (EntityImpl::isValid).
  Proceed with the treatment of the selection event only if it is validated... You could even show an error or a warning message asking the user to provide valid data and even commit the line before choosing another.
  (Sorry, don't have an example of a code of practice now)

• PC user cannot publish the FLA, but Mac user can?

  A developer using a Mac sent us a FLA file with its programming (.as) class files. When we try to compile a SWF using the FLA file, we get actionscript errors. However, if we take the same file directory have a Mac user load this same FLA and export it, they do not have the same problem and the SWF export correctly.
  
  Our machine will still export a SWF file, but it does not work properly (as it generates errors).
  
  No idea why this is happening between Mac and PC users?

  I found the answer, after uninstalling and reinstalling Flash and discover who has not worked. :)

  It turns out that it was in the object files Actionscript Flash generates during compilation. These are stored with the extension .aso. The ASO files are used for purposes of caching in order to expedite the export process.

  According to the documentation, Flash detects changes to the .as files and then proceeds to update the ASO files accordingly. That is not apparently happened in this case, as she had apparently continued to do refers to a wrong file of ASO.

  Once I selected CONTROL | DELETE ASO FILES AND TEST MOVIE, the SWF compiled without error.

  I hope this helps someone else out there! Here is some additional information on the ASO files:
  With the help of ASO files

• XP: Restrict users to install programs, but allow users to update

  Hello

  How can I, as an administrator, set up Windows XP as a user cannot install a program, but a user can install an update.   For example, a user would be forbidden to install Adobe Acrobat.  But once installed by the administrator, the user can install the updates later.

  Thank you

  karlo88

  If it comes to only Adobe Acrobat it not there no available for this group policy.
  Other functions of Windows, use the Group Policy Editor.

• Question about the use of subtypes (define a subtype of w / constraint defined by the user)

  Hi guys,.
  
  I am a newbie to PL/SQL.
  I really appreciate it if save you a little of your time to respond to this message.
  
  According to paragraph reference 10 g Release 2 (10.2) and Guide the user to the PL/SQL in Oracle® database labeled using subtypes, I found that the constraint of the subtype defined by the user can be overridden when you declare variables.
  
  Questions:
  
  1. Why does PL/SQL compel user-defined subtype substitution? Or is this an unexpected bug that exist in PL/SQL?
  
  2. is it arrive at Oracle subtypes as INTEGER, CHARACTER, etc.. ?
  
  I have reproduced this problem using the PL/SQL code following against Oracle9i 9.2.0.1, which produced any error or exception whatsoever.
  
  TO ELIMINATE ANY CONFUSION, THE ISSUE IS HIGHLIGHTED IN BOLD
  
  -THE SAMPLE CODE TO REPRODUCE THE PROBLEM
  DECLARE
  -a user-defined (Xtype) subtype is defined with a precision and scale force;
  Subtype Xtype IS NUMBER (1.0);
  -However, Xtype is overridden when you declare the variable "var_num".
  Xtype var_num (2,0);
  BEGIN
  var_num: = 10;
  DBMS_OUTPUT. Put_line ('var_num =' |) To_char (var_num));
  EXCEPTION
  WHILE OTHERS THEN
  DBMS_OUTPUT. PUT_LINE ("ERR: ' |") SQLERRM);
  END;
  /
  
  -HERE IS THE RESULT
  SQL > @D:\LocalWork\dummy.sql
  var_num = 10
  
  Edited by: HappyJay 05/09/2010 01:48

  Send me on email offline (remove the spaces) damorgan11g @ gmail.com and I will convey that to the person who is just that kind of decision regarding Oracle 12 currently.

• Since the last update of Firefox, I don't see a security lock when I connect to my two web sites to secure Bank so am forced to use IE and the two banks said the problem with Firefox, not their systems.

  Since the last update of Firefox (Version 4.0.1) I do not see a security lock when I connect my two web sites to secure Bank so am forced to use Internet Explorer for internet banking. I contacted the St George Bank and the ANZ Bank and both say that the problem with Firefox, not their systems. They advise also strongly me to not perform Internet banking unless the security padlock closed is visible in the window secure. The padlock is not visible when I connect secure site of PayPal. Before the upgrade, this problem did not exist and there is no when I use IE. Firefox is my favorite browser.

  The status bar everything has been redesigned, so now allows you to check if the site is secure the box to the left of the address (green, blue or plain).

  The site identity button | How | Firefox help

  Further discussion on this change mention an add-on, you can use if you really prefer to see a lock:

  Firefox 4 where is the lower right corner of padlock | Firefox Support Forum | Firefox help

• A small flag appears on the bottom of my screen that says activate security service Windows, but when I try to turn on it says could not start the Windows security service

  Original title: HELPPPPP

  My computer a little flag in the background with a x... said red it turn security service windows, but when I try to turn it on... it said windows security service cannot be started :/

  Hey ChelseaHarris,

  Take a look at two responses in the thread below the link to see if they allow the Windows launch security service:
  Could not start the Windows Security Center service.

  If these steps do not help, try to run a full scan using the Scanner from Microsoft which can be downloaded using the link below:
  Microsoft safety scanner

  Hope that helps.

• Secure notes of Keychain Access on IOS devices?

  Hello

  someone knows how can I can see/Access Keychain Access Secure Notes (created in Mac OS), using synchronization iCloud on any device 10 IOS (iPhone, iPad)? I can see passwords, maps via Safari on IOS, but not course notes - is this supported feature? Or I have to use the 3rd party app (1password) to get the ability to share notes secured between devices?

  Thanks for the help!

  Best regards, Petr

  Your notes are in the Notes app on iOS device, on OS X, or iCloud.com.

• Research of secure Notes

  Secure notes are a bargain. Finally a place for my login information. One problem - I can't, do a search. I would like to reiterate that - I can't find the content of the notes unlocked. Two level support pushed the issue to the top of the ladder and came back with, 'this is the expected behavior. Something about security.

  If you index the unlocked notes, the information would be available free of charge in the Spotlight index and would be safer.

• How to create a secure page. Not a secure area, just a https page to a form?

  How to create a secure page. Not a secure area, just a https page to a form? I can't find a way let me by creating or copying a page in dreamweaver and admin console is only showing the current http pages. I created before secure areas and included secure on my address worldsecure applications, but I just want to have pages on https.

  Make your page then it just a link to your domain secure (found under settings-> fields within the admin site)

  https://yoursite.worldsecuresystems.com/the-page