See the primary key

Similar Questions

• Hi cannot see the column in the primary key as a master detail

  I have a form master detail. In the first form master, I am unable to see the primary key
  Now, the form is based was completely and I'd also like to see the visible primary key column in the main report
  
  
  If I put the primary key as rowid then I should have seen the primary key.
  Now I can see the pencil icon (the icon of pencil to the rank nedopil) instead of the actual primary key column. who's a number of data...
  I'd like to be too visible. Can we guide what should I do for this...
  Thank you

  Are not only in the hidden items? Change the settings for them to be unhidden.

• Comparison of the data of several rows in a table - based on the primary key

  Currently I have a select statement that returns hundreds of records.  Each returned record is linked to A NUMBER of ORDER this order number has a recipe.  (a bit like a cooking recipe).  Each recipe has many records in the database related to this order number and records should be compared to records in a table that bind to a specific primary key...  (I have already developed the logic to isolate what PK I need).  If all these records that are returned by the select statement below does not match all the records containing PK in the table below, I need to get the next PK and compare all these recordings for select statements return.

  See below for a better understanding. Need a good example detailed on how to solve my problem here.

  Just to help you understand:

  Each element of the recipe is 3 parts (side, ref_des, part_number).  1 single recipe can have several parts (where the part_number), and each of these pieces should be placed on the lower side or top of the Board that is there "side" comes into play.  Same thing with Ref_Des.

  What is going on

  Select statement returns the RECIPE of ORDER NUMBER A.  There will be multiple records returned by this query.

  Select the Return statement:

  • Side
  • Ref_Des
  • Part_Number

  Example of return:

  B c17 75145-2

  T f14 89242-8

  B s12 45123-3

  etc,

  In general - what I need to do:

  There is a table called AUTO_RECIPE_DETAILS.  I take all of the records returned by the select query above and compare for each record in this table relating to the recipe 30319-000001.  30319-000001 a number of records.  It is the primary key for a whole recipe as seen above.  This primary key is bound the number of data records in this table.  The comparison is to see if all records under RECIPE_NAME 30319 -000001 match all the records returned by the select statement.

  IF IT DOES NOT MATCH: recover the following recipe in this table below 30319 -000002 and make the same comparison.
  

  Here's a perfect example of what the table looks like: (AUTO_RECIPE_DETAILS)

  
  

  RECIPE_NAME SIDE REF_DES PART_NUM

  -30319-000001 C16 87595-1 B

  -30319-000002           T B14 74150-4

  -30319-000001 T B14 34251-2          

  -30319-000001            T F24 84180-7

  -30319-000002 T B12 13710-8          

  
  

  
  

  It is the solution to my original question.  By this thread, it's the right answer and I hope this helps someone who is trying to compare two arrays element-by-element.  In the end, the advice given in this thread were correct and I will be using all of your suggestions and the scrapping of this.  Thank you everyone for your help though.

  FOR index_p IN pid_recipe. FIRST... pid_recipe. LAST

  LOOP

  Result WHEN the OUTPUT = 1;

  FOR index_d IN details_recipe. FIRST... details_recipe. LAST

  LOOP

  IF (pid_recipe (index_p). SIDE = details_recipe (index_d). SIDE)

  AND (pid_recipe (index_p). REF_DES = details_recipe (index_d). REF_DES)

  AND (pid_recipe (index_p). PART_NUM = details_recipe (index_d). PART_NUM)

  THEN

  EXIT;

  ON THE OTHER

  DBMS_OUTPUT. Put_line("IT WAS NOT a MATCH");

  result: = 1;

  EXIT;

  END IF;

  END LOOP;

  END LOOP;

  DBMS_OUTPUT. Put_line('LOOP OUT');

• How to refer to the primary key column of newly inserted rows of tabular form

  Hello

  I use APEX 4.2.0.00.27 with Oracle DB 11.2.0.3.0.

  I work with a tabular presentation wizard-created for insert and update a table using the integrated SRM process (sequence 10).  I'm trying to use a process of anonymous block of PL/SQL (sequence 30) to make another manipulation of table after the records were inserted or updated.  The manual process is associated with my tabular form and I use the variables of name of column binding in my program block.

  My (rsn_test) table has 3 columns: test_id (number), test_nbr (number), test_id2 (number).  Test_id column is identified as the primary key and the type of the source already exists a sequence rsn_test_seq.  Column test_id2 gets its default value 0 to a hidden page element.

  I would use my manual process for updating the value of the test_id2 column.  If it's 0 then I want to put the value of the column test_id.  If it is any other value, then it must remain at this value.  My logic works very well for an existing line, but I'm running into a problem with the newly added lines.  The new lines get inserted, but the test_id2 column remains the default value 0.  I can tell the debugger that the SRM process is triggered first and inserts the line, then my manual dealing with fires.  The problem seems to be that the connection variable: TEST_ID for the primary key column remains NULL after insertion.  I don't know how to get the value of the column test_id of my newly created line to use in my PL/SQL block to my update.

  Process of PL/SQL:

  DECLARE
  BEGIN
     :P7_SHOW := NULL;
     :P7_SHOW := NVL(:TEST_ID2,555) || ' and ' || NVL(:TEST_ID,787) || ' and ' || NVL(:TEST_NBR,9999);
     IF :TEST_ID2 = 0 AND :TEST_ID IS NOT NULL THEN
        UPDATE rsn_test
           SET test_id2 = :TEST_ID
         WHERE test_id = :TEST_ID;
     ELSE
        :TEST_ID2 := :TEST_ID2;
     END IF;
  END;
  
  

  Excerpt from the debugger:

  0.01625 0.00010 Processes - point: ON_SUBMIT_BEFORE_COMPUTATION
  0.01635 0.00008 Branch point: Before Computation
  0.01643 0.00003 Process point: AFTER_SUBMIT
  0.01646 0.00022 Tabs: Perform Branching for Tab Requests
  0.01668 0.00008 Branch point: Before Validation
  0.01676 0.00024 Validations:
  0.01700 0.00135 Perform basic and predefined validations:
  0.01835 0.00020 Perform custom validations:
  0.01855 0.00049 ...Validation "TEST_NBR must be numeric" - Type: ITEM_IS_NUMERIC
  0.01904 0.00007 ......Skip for row 1 because row hasn't changed
  0.01911 0.00016 ......Skip for row 2 because row hasn't changed
  0.01927 0.00012 ...Validation "TEST_ID2 must be numeric" - Type: ITEM_IS_NUMERIC
  0.01939 0.00007 ......Skip for row 1 because row hasn't changed
  0.01945 0.00018 ......Skip for row 2 because row hasn't changed
  0.01964 0.00005 Branch point: Before Processing
  0.01968 0.00004 Processes - point: AFTER_SUBMIT
  0.01972 0.00588 ...Process "ApplyMRU" - Type: MULTI_ROW_UPDATE
  0.02560 0.00154 ...Execute Statement: declare function x return varchar2 is begin begin for c1 in ( select "RSN_TEST_SEQ".nextval pk from sys.dual ) loop return c1.pk; end loop; end; return null; end; begin wwv_flow.g_value := x; end;
  0.02714 0.00140 ......Row 3: insert into "APPPCSRSN"."RSN_TEST" ( "TEST_ID", "TEST_NBR", "TEST_ID2") values ( :b1, :b2, :b3)
  0.02854 0.00011 ...Process "ApplyMRD" - Type: MULTI_ROW_DELETE
  0.02865 0.00004 ......Skip because condition or authorization evaluates to FALSE
  0.02869 0.00015 ...Process "Process Submit" - Type: PLSQL
  0.02884 0.00007 ......Skip for row 1 because row hasn't changed
  0.02891 0.00012 ......Skip for row 2 because row hasn't changed
  0.02903 0.00012 ......Process row 3
  0.02915 0.00429 ...Execute Statement: begin DECLARE BEGIN :P7_SHOW := NULL; :P7_SHOW := NVL(:TEST_ID2,555) || ' and ' || NVL(:TEST_ID,787) || ' and ' || NVL(:TEST_NBR,9999); IF :TEST_ID2 = 0 AND :TEST_ID IS NOT NULL THEN UPDATE rsn_test SET test_id2 = :TEST_NBR WHERE test_id = :TEST_ID; ELSE :TEST_ID2 := :TEST_ID2; END IF; END; end;
  0.03344 0.00013 ...Session State: Saved Item "P7_SHOW" New Value="0 and 787 and 1300"
  0.03356 0.00004 Branch point: After Processing
  0.03360 0.00048 ...Evaluating Branch: "AFTER_PROCESSING" Type: REDIRECT_URL Button: (No Button Pressed) Condition: (Unconditional)
  0.03407 0.00013 Redirecting to f?p=290:7:8717971109610:::::&success_msg=0%20row(s)%20updated%2C%201%20row(s)%20inserted.Success%2FEBD244168556408CBA714E3974918C09%2F
  0.03420 0.00012 Stop APEX Engine detected
  0.03432 0.00007 Stop APEX Engine detected
  0.03439 - Final commit
  
  

  Any suggestions?

  I have run tests on

  https://apex.Oracle.com/pls/apex/f?p=83488:1 demo/demo

  to see your problem.

  I have 2 solution for your problem.
  I add trial NOT tabular just usual block of PL/SQL

  	BEGIN
  	I'm IN (SELECT TEST_ID FROM RSN_TEST WHERE TEST_ID2 = 0)
  	LOOP
  	UPDATE RSN_TEST
  	SET test_id2 = TEST_ID
  	WHERE test_id = i.TEST_ID;
  	END LOOP;
  	END;

  and works very well, you can see in the sample.

  The other solution is to show new generated TEST_ID

  Adding a sequence as a default value for a column in a table field

  And to execute your procedure.

  I get how is with the good luck of time.

  By

• How to generate the primary key element and move to another page?

  How to make the primary key value to another page in a table?

  

  Hello

  I am a beginner in the apex,

  Please, now I want to add the primary key to page 1 for item id in page 2...

  Notice:

  Before, I created (process of pl/sql in the rendering of page @ after the header section) to get the id of secuance.

  BEGIN
  :P17_ID := seq_t_items_id.NEXTVAL;
  END;
  
  
  

  primary key is generated for the element ID of page 1... BUT When I update 'page 1' I see error and solved when shut down my browser and open it again...

  Please help me to...

  1. Generate a primary key (article id @ page 1)... without refresh error. ?
  2. Pass him (item_id) on page 2

  Thank you all for...

  Sorry I'm beginner in apex,

  I don't know how Pass value of the item_id TO page 1 page 2 "in the form ID", turn to the first PHOTO... .
  Help me..

  Thank you

• How to extract the values of the line full in the bean to support using the primary key

  Hello

  I have a table that has columns as plant_name, business planner email id and identification of email resident engineer. Here, Plant_name is the primary key.

  Now, I have this plant's name slipped and dropped like selectonechoice (drop) on page jsff. In this user can select any name of 1 plant drop down.

  Right now, I can go get plant in backing bean name, but I can't understand how business plan for extraction and identification of email of the engineer resident in this key primary-plant_name at the bean to support.

  Please let me know if anyone has an idea in this regard.

  JDeveloper version 11.1.1.6.0

  Thanks in advance.

  Sneha

  Sneha211 wrote:

  On the jsff page

  required = "#{bindings." Plant.hints.Mandatory}.

  shortDesc = "#{bindings." Plant.hints.ToolTip}.

  ID = "soc1" unselectedLabel = "- Select -"

  autoSubmit = 'true '.

  Binding = "#{backingBeanScope.backingbean.plantbean}" > "

  ID = "si1" / >

  In backing bean

  DCBindingContainer = lBindingContainer

  (DCBindingContainer) BindingContext.getCurrent () .getCurrentBindingsEntry ();

  DCIteratorBinding lBinding = lBindingContainer.findIteratorBinding("SupplierVO1Iterator");

  NewRow row = lBinding.getCurrentRow ();

  String aamplant1 = (String) newRow.getAttribute ("Plant");

  Hi Sneha, you've written code for it

  you have found the current line and the primary key then this line, then why you not not using this same rank to get the other attributes?

  NewRow row = lBinding.getCurrentRow ();

  String aamplant1 = (String) newRow.getAttribute ("Plant");

  String businessPalnner = (String) newRow.getAttribute ("business_planner"); Returns the value of the same line
  

  Engineer in String = (String) newRow.getAttribute ("engineer");

  
  

  OR if your condition is like that-

  you have a primary key field value, but you do not have the corresponding line, then you can get that line and it's attribute by using the primary key value

  See - http://adfgouravtkiet.blogspot.in/2012/10/filtering-of-data-from-vo.html

  Hope it helps

  -Ashish
  

• validate the primary key

  If the user enters two combination should trigger the error

  For example I testcode table with the primary key is combination of code1, code2, if use enter the same value for both two code I have to raise error am in jdeveloper 11.1.1.7.0
  

  see this

  Zeeshan Baig blog: define the constraints of unique keys for Non-primary key attributes ADF-British Colombia

  http://www.gabrielsideras.com/2010/09/28/ADF-unique-key-validation/

  http://www.databaseskill.com/1654786/

• Problems with the primary key of the query string

  Moving from asp to php, to work with David Power's book: The Essential Guide to Dreamweaver CS4 with CSS, AJAX, and PHP.  Recycling of my brain, so starting from scratch in the learning process.

  Everything was going perfectly until I tried to add the primary key of a record in a query string.  I compared my code with the example code for the book, and everything matches.  When previewing the page in my browser and hover over the link which must pass the main code on the next page, the query string does not appear correctly.  It shows user_id = but no figure shows, as it is supposed to.  www.webpage.com/update_user.php?user_id=

  Here is my code: (Please note, <>have been removed, as I was unable to find a way view the code in the correct way here (copy/paste was doesn't work do not, nor insert syntax))

  ? PHP {?}

  ? PHP echo $row_listUser ['family_name'];? PHP echo $row_listUser ["FirstName"];?

  ? PHP echo $row_listUser ['username'];?       ? PHP echo $row_listUser ["admin_priv"];?

  a href = "update_user.php? user_id =? php echo $row_listUser ['user_id'];?" "Edit / has

  a href = "delete_user.php? user_id =? php echo $row_listUser ['user_id'];?" ' Delete / has

  ? PHP} while ($row_listUser = mysql_fetch_assoc ($listUser));?

  Any ideas that could help me understand why this part does not in particular would be greatly appreciated.  Writing to the database worked perfectly, I see that there are numbers in the database as user_id, and it is defined as my primary key in the configuration database.  Such a simple process that is causing me headaches!

  Thank you

  You have the code to request a copy in your folder:

  $query_listUser = 'SELECT user_id, username, first_name, family_name, admin_priv from users ORDER BY family_name ASC';

  $listUser = mysql_query ($query_listUser, $connSCFDIR) or die (mysql_error ());

  $row_listUser = mysql_fetch_assoc ($listUser);

  $totalRows_listUser = mysql_num_rows ($listUser);

  $query_listUser = 'SELECT username, first_name, family_name, admin_priv from users ORDER BY family_name ASC';

  $listUser = mysql_query ($query_listUser, $connSCFDIR) or die (mysql_error ());

  $row_listUser = mysql_fetch_assoc ($listUser);

  The $listUser table will contain the results of the second query, which does not include the field user_id. delete the redundant code.

• Get the primary key of entry just created by submitting the form

  Hi guys,.
  
  I have a form built in APEX based on a table. The PK is generated by the sequence and the values of the form are recorded by DML (insert).
  
  Do I have to do is once I have create a new entry with my, I need to update a whole bunch of other tables with the new PK that I can easily do this by creating a process of PL/SQL after DML.
  
  
  
  However, I need the primary key generated by the new entry (created by filling out the form + submit).
  
  One way around it is

  Select max(userid) from user

  to retrieve it, but I don't know if it's a good idea/practice.
  
  Any idea guys? See you soon.

  Taepodong wrote:
  Hi guys,.

  I have a form built in APEX based on a table. The PK is generated by the sequence and the values of the form are recorded by DML (insert).

  Do I have to do is once I have create a new entry with my, I need to update a whole bunch of other tables with the new PK that I can easily do this by creating a process of PL/SQL after DML.

  However, I need the primary key generated by the new entry (created by filling out the form + submit).

  One way around it is

  Select max(userid) from user
  

  to retrieve it, but I don't know if it's a good idea/practice.

  This will only give the maximum ID and not currently generated ID

  Any idea guys? See you soon.

  Use this feature APEX
  Change your page > change you the DTF process for the form > Enter you page back key point in the element (this returns the new pk value generated by this form)

• dynamically find the primary key of a table

  Hello
  
  How can I see (dynamically) participating in a primary key table columns?
  
  Let's imagine that we have a procedure receives the name of the table as a parameter:

  PROCEDURE delete_record (table_name IN VARCHAR2)

  The procedure is to delete a record in the table 'table_name '.

  -- g_record is a global variable containing the values of the record that should be deleted.
  l_sql_statement := 'DELETE FROM ' || table_name || ' WHERE ' || primarykey_col_1 || '=' || g_record.col_1;
  
  EXECUTE IMMEDIATE l_sql_statement;

  So, how do I see the columns that make up the primary key, perhaps, somehow the using the description of the table?
  
  Thank you!

  You can use the ALL_CONSTRAINTS in combination with views ALL_CONS_COLUMNS to retrieve this information (there are also views DBA_ and USER_ as well). Here is a sample of SQL that you could use:

  SELECT  COLUMN_NAME
  FROM    ALL_CONSTRAINTS         AC
  JOIN    ALL_CONS_COLUMNS        ACC     ON ACC.TABLE_NAME       = AC.TABLE_NAME
                                         AND ACC.CONSTRAINT_NAME  = ACC.CONSTRAINT_NAME
  WHERE   CONSTRAINT_TYPE = 'P'
  AND     ACC.TABLE_NAME  = table_name
  

  I wonder however this method because it seems unorthodox. Could you provide a reason for this kind of implementation?

• Shape of the apex - how to get the primary key value manually?

  Hello
  
  Whenever I create form by using wizard Apex, he asks me to specify the trigger/sequence/pl/sql function to fill the primary key value.
  
  However, if I want to specify primary key myself (ie. undetermined generated automatically), how I can clarify that?
  
  Thanx

  Hello

  You mean by yourself: by hand or by a pl/sql?

  If you say by trigger, the system does not take on what number is sent. If you can give it "manually".

  May I ask what is the reason for this?

  See you soon,.

  Arnaud

• APEX do not allow to change the lines of the columns that are the primary key?

  I have pictures:
  http://img508.imageshack.us/my.php?image=21269582oe8.jpg
  
  
  Book (id_book - 'Primary key', title, year); book_author (id_author id_book - 'Primary key', - 'Primary key'); author (id_author - "Primary key", name)
  
  
  
  I created a new page-> Form-> form of 'author' table because I want to add new authors, modification and deletion. During the creation of this page, I have chosen column 'id_author' as '1 primary key column' and everything is OK (I can't edit the 'id_author' column - this column is autoincrement and I can change the 'name' column).
  
  BUT I also created a new page-> Form-> table for table "book_author" because I like to write numbers like id_book and id_author, change and remove them (so add relations between tables: book, book_author and author). During the creation of this page, I have chosen column 'id_book' as '1 primary key column' and 'id_author' as 'column primary key 2'. And on the Web site, I can't edit these fields. And I can not add also new line because I see in each new line: (null).
  
  http://img444.imageshack.us/my.php?image=11324615yk9.jpg
  
  APEX do not allow to change the lines of the columns that are the primary key? It's stupid... What can I do?
  
  Edited by: user10731158 2008-12-20 11:40

  Column unique and not meaningful if you ever want to update. In the case of your example, you need to add an ID column in the intersection of book_author table. Honestly, I was so blown away (and pleasantly surprised) by the absence of rebuttal and the "thx" I advanced and set up an example of how I would define the book_author table:

  create table  book_author
     (id varchar2(32),
      book_id varchar2(32),
       author_id varchar2(32),
       modified_on     date,
       modified_by varchar2(255),
       constraint book_author_pk primary key (id),
       constraint book_auth_book_fk foreign key (book_id) references books(id),
       constraint book_auth_author_fk foreign key (author_id) references authors(id)
       )
  /
  
  create unique index book_author_uq on book_author (book_id,author_id)
  /
  
  create or replace trigger  biu_book_author before insert or update on book_author
  for each row
  begin
       if inserting then
            :new.id := sys_guid();
       end if;
       modified_on := sysdate;
       modified_by := nvl(v('APP_USER'),user);
  end;
  /
  

  Good luck
  Tyler

• How to find the primary key columns in the tables in MS Access using SQL queries

  How to find the primary key columns in the tables in MS Access using SQL queries

  Hello

  This is the forum for Windows Vista programs related issues.

  For better assistance, please try instead the Forums in SQL Server .

  Thank you! Vincenzo Di Russo - Microsoft MVP Windows Internet Explorer, Windows Desktop Experience & security - since 2003. ~ ~ ~ My MVP profile: https://mvp.support.microsoft.com/profile/Vincenzo

• Doomed: URGENT: the windows behind the laptop sticker subsided, can't see the product key.

  I bought a HP laptop in December 2007. It came with Windows Vista Home Premium 32 bit OS pre-installed on it. It has been working well so far, when I need to format and install a fresh copy of the product. But the Microsoft sticker with the original product key on the back of my laptop disappeared and now I don't see the product key printed on it. I called HP support and after 2 days they told me, they cannot help me get the vista product key back. What should I do?

  http://www.Belarc.com/free_download.html

  If Vista is still running on your computer, use the program above to find your product key.

  Otherwise, we cannot help you.

  Vista is preinstalled HP on your computer.

  When you use the process of recovery of the manufacturer of the computer, it is normally an auto reinstall the fronm a recovery Partition...

  See you soon. Mick Murphy - Microsoft partner

• Make required error appears only the primary key generated in prior Database Table insert trigger

  Dear all,

  I am a beginner in the ADF and am under Jdeveloper Studio Edition Version 12.2.1.0.0.

  
  

  I'm trying to insert a record, I created the trigger for insertion prior to get the primary key and set some other default values.

  
  

  On the page, I did read-only primary key column and false required.

  
  

  When I try to save - commit (Programmatic), I get errors for the required value. How can I stop this errors.

  
  

  Secondly, I also tried changing the agent to disabled on the attribute View object that raised the error below:

  
  

  < oracle.dfw.impl.incident.DiagnosticsDataExtractorImpl > < DiagnosticsDataExtractorImpl > < createADRIncident > < incident created 148 to key problem "DFW-99998 [oracle.jbo.PersistenceException] [oracle.jbo.server.RowReference.verifyPrimaryKeys] [Proposals]" >

  
  

  Hoping for help.

  
  

  Thanks and greetings

  
  

  Arif Khadas
  

  If the primary key values from DB sequence, you can follow this approach:

  Using the sequence of database in ADF - Souza Waslley Blog

  Oracle Fusion Middleware Technologies: ADF 11 G: generate the primary key sequence number

  Otherwise, instead of DB trigger, create the DB function that retrieves the value of the PK and call stored function in the overloaded method create() entity: