Seeing E2500 to power flashes; cannot reset
I have E2500 wireless router and have used fine for more than 6 months. Today, I needed a direct connection to my computer so I unplugged the cable from my router and connected on my computer, worked well. When I had finished, I plugged the cable on the router and tried to connect to the radio but I could find is no longer the signal from the router. I tried resetting by disconnecting and reconnecting the device and the computer, but nothing helped. On the back, the power light flashes and will not stop. I tried to reset the unit by pressing the button down for 30 + dry and nothing happens just the power supply light continues to blink. I even re-inserted the installation disk, but he cannot do anything because it can not find the router. I have no idea what to do next, any help or suggestion would be much appreciated as I spent the last 5 hours, frustrating me.
Thank you
-Jeff
jvgroom, a power indicator light flashes could mean a hardware or firmware issue. Connect a computer to the router and use the computer to PING 192.168.1.1 if you get 4 answers, you can still be able to update the firmware on the router via the router page or via a TFTP file.
Please visit this link. http://KB.Linksys.com/Linksys/UKP.aspx?VW=1&docid=8a3567e58c834e7485042cd8851b2776_4573.XML&PID=80&r...
Tags: Linksys Routers
Similar Questions
-
Cannot reset iPod classic after a fall on the cement.
Cannot reset iPod classic after a fall on the cement. Said to contact apple with a face sad iPod.
iPod classic 30 GB.
Tried resetting and it said to contact Apple. The 'do not disconnect' flashed continuously until it empty the battery. An error code came to my office saying I had expelled irregularly. I had not ejected it.
Any ideas?
You may have damaged hard drive to the iPod (or other component). You are able to put it in Disk Mode?
Put the iPod in disk - Apple Support Mode
If it passes in disc Mode, run iTunes on the computer and connect the iPod. iTunes may ask you to do a restore with a message on the "recovery." If you're OK with deletion of the iPod, tell iTunes to perform the restore.
If it does not go in Disk Mode, or the restore fails, you have a hardware problem with the iPod hard drive.
-
"Flash cannot parse this document" - CS5 question
Help! I have a FLA that CS5 has apparently damaged on a backup... (When you load the FLA in CS5, it now fails and sends "Flash cannot parse this document" in the output window.)
Unfortunately I found the corrupt nature of the file once I had made my regular routine of backing up my files - which means that the saved file is ALSO corrupt. I'm shooting in the dark here, but is it possible that the FLA can be recovered? Desperate, because this is a project I did last month.
Any help would be greatly appreciated!
See you soon,.
Ben.
Hello
We discovered that the file is damaged because of the empty structure in good following:
1. open the FLA in Flash CS4
2. open the library panel.
3. navigate to _movieclips & _gui/bitmap/_menu wheel/Gui_Wheel_ButtonOverlay_On and open it for editing in symbol mode.
4. Insert a keyframe in layer 2 of this movieclip.
5. save the FLA
Please send us your FLA so that we can narrow the problem.
-Amel
-
Cannot reset the Security Questions
Hello my dear
-J' forgot my account security questions, but I remember password
And I'm changing my Security Questions, but show me this sentence
"Cannot reset Security Questions."
We have insufficient information to reset your security questions. "
-I want to solve this problem as soon as possible if permitted
-
Email from bad security. Cannot reset security questions. catch 22! Help.
Email from bad security. Cannot reset security questions. catch 22! Help.
Try to use the service of Julian inconu of Apple. If you cannot reset their through it, you'll have to ask security team account Apple to reset your security questions. To contact them, click here and choose a method; If this page does not list one for your country or if you are unable to call, complete and submit this form.
(144529)
-
Cannot reset Apple ID same security issues with the link for valid reset. Help?
So, I'm trying to reset my security questions, because I forgot the answers. I followed all the procedures to do, but it won't work.
I clicked on the link for reset enter my Apple ID account page, then get the message: 'Reset Instructions sent. An email with the instructions was sent to @emailaddress. Follow the instructions in the email to reset your security questions. » - OK
I opened the email: "Dear ME, recently made you a request to reset your Apple ID security questions and answers. To complete the process, click on the link below. Reset now >"I click on the link, it opens a new window with a login screen. - OK
On the login screen, I entered my account information, email, and password in the fields and click the button to continue. Instead of connect, I get the message pop-under from the password field as follows: - FAIL
I try again and again, but it never works. Whenever I get my password and trying to proceed, the loading spinner runs for a bit, then I get this message "to reset your security questions, sign in to your account and start again." I have never spent this page and in a region where I am able to actually reset my security questions. I tried with all browsers, Firefox, Chrome, Safari... nothing works. Now, I have tried 3 times reset by e-mail. It will not work. What is going on? Is the site broken?
To make things worse, I don't have an option to call for framing according to the Apple website. The only option I get is to contact my operator. What the * is my carrier will repair my Apple ID? It's very frustrating say the least. Someone please help!
You cannot reset the Security Questions If you forgot the. You can only reset them if you know them (which means that you also know your password).
You can contact the Apple Support here to have a reset link you sent once they verify your identity:
Good luck
GB
-
When I start Firefox, it happens with Yahoo, NOT with the default Firefox. If I try to reset Firefox, I get the response "well, it's embarrassing" and cannot reset. I went to the deleted control panel Firefox and downloaded and re-installed FIrefox from the site of the Mozilla Foundation, and the problem still persists. I can't get rid of Yahoo.
As a side note, Chrome works OK. When I start Chrome, I automatically open four tabs. From time to time, opens Chrome a fourth tab... and it's Yahoo. I can go into the settings and delete the fourth tab and everything is OK for a while, but eventually the fifth tab opens again, and I again to remove. Don't know if these are related issues, but I don't believe in coincidence.
I use WebRoot security and have scanned my PC and deleted all the threats. As WebRoot is, my PC is clean.
You can check the suspicious extensions or recently installed unknowns.
Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.
- Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
- Do NOT click on the reset button on the startup window Mode safe
-
I forgot security rescue and complete e-mail address. How can I see my backup email address or reset my emergency email address?
You must ask security team account Apple to reset your security questions. To contact them, click here and choose a method; If this page does not list one for your country or if you are unable to call, complete and submit this form.
(141239)
-
Cannot reset the P of Satellite series to factory settings
My recetnly of the computer has been infected with the virus, omiga more.
I tried to reset it with the usual Start 0 out and 0 switch on but when I select the reset option I get the message "cannot reset cannot access partition...". "or something like this - any ideas?May I ask what model of laptop and what system do you use?
Have you changed anything on the HARD drive (partition table) in the past?Obviously the recovery cannot start because the partition cannot be found.
-
have 425 dn which is network. Can get a computer tray see 3, but other computers cannot
have 425 dn defined as network printer... Can get a computer tray see 3, but other computers cannot.
How can I get others to see tray 3
I'm sorry, but to get your question more exposure I suggest posting in the trade forums since it is a printer. You can do to Printers - LaserJet. Click new message.
I hope this helps. -
Windows cannot reset your computer
My computer says windows cannot reset your computer... Please help me to reset my computer...
The original product key is embedded in the motherboard of the laptop UEFI firmware, so you're not going to lose...
If you restore using recovery media HP, which will retrieve the key automatically and reactivate the original OS.
However, you have already saved your PC running Win10 with Microsoft. So, if you decide to install Win10 instead, as long as you install the same version you already running, once the PC connects to the Internet, it will communicate with the Activation of MS servers and automatically reactivates.
Good luck
-
I forgot the password of hotmail and cannot reset it
I forgot the password of hotmail and cannot reset the password. What can I do? I made another account on live.com. I want my old account.
Hello
Answers is a peer group supported and unfortunately has no real influence on Hotmail.
HotMail has its own Forums, so you can ask your questions there.
Windows Live Solution Center - HotMail - HotMail Forums Solutions
http://windowslivehelp.com/Hotmail - Forums
http://windowslivehelp.com/forums.aspx?ProductID=1Hotmail - Solutions
http://windowslivehelp.com/solutions.aspx?ProductID=1How to contact Windows Live Hotmail Support
http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htmWindows Live Hotmail Top issues and Support information
http://support.Microsoft.com/kb/316659/en-usCompromised account - access unauthorized account - how to recover your account
http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41Hotmail hacked? Take these steps
http://blogs.msdn.com/b/securitytipstalk/archive/2010/07/07/Hotmail-hacked-take-these-steps.aspxI hope this helps.
-
original title: web cam problem
using Skype... I can see other people, but they cannot see me...
Hello
Be sure to contact the Skype Support like this might be a known issue and they might have the solution.
There is also information and on the Skype Forums.Skype - Support
https://support.Skype.com/en-us/Skype - Forums
http://Forum.Skype.com/Also check with the manufacturer of the system, their drivers and documentation support online and ask
their forums (if any).============
You will probably need to reload the drivers of the device and any camera control software.
Login as an administrator.
Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
will update the driver stack.Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
software (if not more recent get the same).Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlThen let windows updates on however prevent loading of drivers who are often older than the
those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Cannot reset the Xbox live account
Original title: cannot reset the password
My sister-inlaw bought me a live account xbox 6 years ago but I forgot the password. I tried everything he was asked to figure out what the password, but no luck.i filled the form for changing the password twice, but had no luck. I do not understand that once its my credit card on the account. all I want to do is return on the line, but can't. I don't want to lose my gamerescore I put a lot of time and money in this account. What can I do to fix it is there a number I can call to speak to microsoft because the hotline live can help me with this. Thank you
my account BipolarSteve o
MY NEW email * address email is removed from the privacy *
Hello
Please follow the links below and check the issue:
Xbox LIVE connection issues:
http://support.Xbox.com/en-us/billing-and-subscriptions/Windows-Live-ID/Xbox-Live-sign-in
Find your account Microsoft or the password:
http://support.Xbox.com/en-us/billing-and-subscriptions/account-management/forgot-Microsoft-account
Also check out this link to reset the password:
https://account.live.com/ResetPassword.aspx
For more information contact Xbox Support:
I hope this helps.
-
Why when I try install Mac Os Yosemite in VMwareplayer when the virtual machine starts, I get this error:
The CPU was displayed by the operating system of Fords. Power off or reset the virtual machine
I have an AMD A10 processor
VMware does not support the operation of Mac OS X in VMware Player/workstation! Also, legally virtualisables versions of OS X running in a Virtual Machine can be done when done in the Apple brand hardware but when done while running under OS X, and for that, you need VMware Fusion not VMware Player/Workstation (or use ESX/ESXi on Apple brand hardware) you violate Apple's SLA for this product. So any help can you provided for OS X in this use of the scenarios that it would violate the community VMware operating conditions to do.
Maybe you are looking for
-
Compare 2 text files data and output match
Hi all I need some advice. First of all, in BinaryCode.txt data are thus: Replace BinaryCode0 1 0 0 0 0 0 0 0 0Replace 1 0 0 0 0 0 0 0 1 BinaryCode0Replace 1 1 1 0 1 1 1 1 1 BinaryCode1Replace BinaryCode1 1 0 0 0 0 0 0 0 0 the first line of the text
-
How can I remove the sender address in email before shipping
I have an IMAC computer. My email is msn.com (Hot Microsoft mail), I would delete the senders address before forwarding.how?
-
BlackBerry smartphones RECEIVES the MAILS to FOLDERS other than Inbox
Hello world I have this problem that I'm trying to work around. On my yahoo mail, I've created rules for certain categories of emails coming. These rules to move messages that meet the criteria for folders that I created. Now I have yahoo mail config
-
Installed Hauppauge winTV. How to configure Windows Media Center.
Original title: Media Center just intalled hauppauge winTV v7.2 HD card. now... How to WINDOWS MEDIA CENTER (or install or what...) I'm Feelin ' very stupid rite now), which is supposed to be included with Windows 7
-
Impossible to pass to windows 8.1 because my processor does not support
OK so I have windows installed on my dell OptiPlex 745 8.1, I uninstalled so I could go to a 64 bit OS. Now it won't let me not reinstall windows 8.1 and says "sorry you can not install the patch because it is not supported by your CPU" I have 8.1 in