Seeing flashes of power to Compaq CQ45 121TX

Similar Questions

• Seeing flashes of power on Tecra A3X (PTA3XE)

  Hello

  A user of our has decided to give his cell phone, a small glass, it is true that his office is pretty hot, but personally, I don't think it's that thirst.

  Fortunately, it isn't that she threw on her rather than liquid food sugars/decaffeinated, although he was on at the time of the water.

  Dismantled, it the best I could and let dry yesterday, most of the impact seems to be the front left (hard drive Bay swimming) if the chip of the extreme right and memroy in the Middle seems to have averted any entry of water.

  This morning when I reconnected it all, farily predicatably, don't turn on the battery power. When I plugged in the socket (at arms length) the power started flashing orange indicator - two courts, a long, two short, one long and then two short.

  Had a quick movement through the user manual and the only reference to the orange light flashing on power supply is overheating and inferes is no trend in the flashig, just that it will continue until it reaches a safe temperature.

  I'm sure that the wee thing is lousy but I wondered that the led power indicated and then by extension if this means that there is no room I can save as a spare (as it can denote ok more memory or chip and others).

  TIA!

  HM, sounds the motherboard has been screwed upward. I don't know, but if you´re really sure that everything is well connected and so on, it should work.
  Maybe the motherboard did get a small splash of this drink 'action '.

  The problem with liquids and laptops is that they won´t together and after a few times "liquid spill" a PCB can get a short circuit from devices that have been in contact with the liquid.

  My opinion: PCB disappeared. But that's just a theory. :)

  Welcome them

• Seeing flashes of power on Portege M200

  My Portege M200 my power light flashes orange 10000110 (or... _ _ _.) in Morse code) what it means?

  It starts flashing when I try to power will not end until I take the battery and power supply outside.
  It will start flashing even though I start without battery!

  Hello

  When the laptop has a problem with power (e-card), power sends the hexadecimal code.
  In your case, there are two problems:

  -To know what this code means that you know exactly how to read this code. The binary code must be converted into hexadecimal code, and then you can compare the code with a description of the maintenance manual.
  -Maintenance manual is not a public document.

  Unfortunately, there is nothing you can do alone. Please contact nearest Toshiba authorized maintainer and leave check your laptop.

• Not corrupt firmware? Seeing flashes of power - then it goes dead

  Hello world

  I'm looking not all threads resolved these but have not found something close to my problem. I have a Linksys WRT54GX4 that worked very well for several months at least. All of a sudden I noticed that I was picking up no wireless signals to the other side of my house. While they inspected my router, the two Ethernet cable direct to the PC connections were flashing, poster of activities. The Internet port also showed activity, but the power light was NOT ON. I tried the second reset step 30 and the router starts flashing lights as if it were to start normally, but then the power light will blink and stay on for about five seconds, then turns off. I can't ping the router right here or log in via the web interface - it is physically off. Then, it will be intermittently come alive, function for a few moments, and then turn off. I have no idea what this could be. Died at this point the router? The other troubleshooting steps, I can try?

  Thanks in advance for any response,

  -AJ

  Try to hard reset the router for 2 minute... Unplug the power cable and plug power 30 seconds... and check if the power led is now solid... If this isn't the case, then, router is that went wrong.

• HP Compaq CQ45-902TU with Windows 8 to be downgraded to Windows 7 Home Premium

  Hi all

  I bought a computer laptop cheap recently "HP Compaq CQ45-902TU with Windows 8" unfortunately cannot use it due to Windows 8' hostile user interface. I was intending to downgrade it. When I read the comments, they say I need to download drivers windows 7 first of this model CQ45-902TU HP Web site. HP site says that they do not provide it. What should I do? Is there anyone there to help?

  Thank you

  Sarah Lloyd

  Hi, Sarah:

  HP does not support PC consumers for all windows OS, but W8 64-bit systems.

  Do your series of W8 recovery discs before install us W7, as most likely the recovery partition no longer works.

  You must change a setting in the BIOS so that the laptop can boot from the installation of W7 media and for W7 run on your laptop.

  See the link below for more information.

  http://support.HP.com/us-en/document/c03736054

  You will need to find a model with a similar material as yours which has w7 64-bit drivers.

  I think that all the drivers and the software of this model should also work on your own, except the audio.

  You must install the Intel graphics driver for your model.

  DO NOT USE ANY BIOS OR FIRMWARE FROM THIS LINK FILES

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5278311

  You can get the Realtek audio driver from the link below.

  Accept the agreement. Download and install the second on the list (W7 64-bit).

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

• LaserJet Pro M201dw: Flashing the power light on LaserJet Pro M201dw

  When my M201dw Pro LaserJet is in standby or energy saving, or what you call mode, the white light in the power button blinks slowly.  It's annoying when the room is dark and you look at the video or something.  Is it possible to keep the dark machine?

  Hello @wrecksx,

  This is a great place to visit for a community support and HP! I see that the power LED flashes when in stand bye mode and you want to know how to stop. I would like to help.

  It is a feature of the printer when in sleep mode, the power LED flashes to warn that the printer is in sleep mode. When you touch the screen the power light goes back to a solid light. There isn't any way to change this feature.

  The printer should be turned off, unfortunately.

  If the issue is resolved, your welcome to show your appreciation by clicking on "Accept as Solution" and the "Thumbs Up". Let me know how make you out. Thank you.

• Dell Dimension 9200. The orange light flashes. Power disconnect day + this market but stop and it will not work unless that unplugged for a day

  Flashes orange and no lights on the front panel next to the USB ports. (see amber light on motherboard, power button / stop 15 sec + he disappears, but the computer does not start, a few times the fan turned on couple seconds), initially it used to go in the cycle (starts for about 3-5 seconds and stops) several times and the flashing yellow light.

  If I unplug the power cord for a day + and try, it worked, stop and restart immediately worked too but when I shutdown and come after a few hours, it will not start again (power plugged).
  Disconnect the power supply for a day + new and it worked once tried.

  I did the reset by pressing the power button / 15 sec + but no luck. Until a day + unplugged worked so far about three times will try again tomorrow and see what happens if I don't stop the computer ever.

  What a PSU or of the motherboard problem or some other problem? Hope it can be fixed.

  Rav96

  Flashes orange and no lights on the front panel next to the USB ports. (see amber light on motherboard, power button / stop 15 sec + he disappears, but the computer does not start, a few times the fan turned on couple seconds), initially it used to go in the cycle (starts for about 3-5 seconds and stops) several times and the flashing yellow light.

  If I unplug the power cord for a day + and try, it worked, stop and restart immediately worked too but when I shutdown and come after a few hours, it will not start again (power plugged).
  Disconnect the power supply for a day + new and it worked once tried.

  I did the reset by pressing the power button / 15 sec + but no luck. Until a day + unplugged worked so far about three times will try again tomorrow and see what happens if I don't stop the computer ever.

  What a PSU or of the motherboard problem or some other problem? Hope it can be fixed.

  Rav96

  A flashing orange power LED, usually indicates a power supply problem power, given the age of the Dimension 9200, which is highly likely.

  Try to replace the power supply with a power supply of labour "Known", to see if that makes a difference.

  This system does not use an exclusive power of Dell, you can install most power supply ATX with a power connector 24 pin or 20 + 4 pin main motherboard and this can be purchased in most local computer stores, or online.

  The 9200 has a rear panel open, a diet with or without the on/off switch can be installed.

  Note: You need a PSU with six SATA power connectors.

  Otherwise, you can buy a refurbished Dell OEM [Dell P/N KH624] 375w PSU from here:

  http://www.Amazon.com/Dell-dimension-power-supply-KH624/DP/B0039OHV2O

  Bev.

• Update for Win 7 on CQ45 121TX?

  I own a CQ45-121TX which has Vista Home Premium SP2 on it.

  I was wondering if it can be upgraded to Win 7 and if and where I could find the drivers for it?

  If anyone has any advice, it would be useful.

  Thank you!

  Hello

  Here is the link for Windows 7 drivers from HP:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=3767639

  But first, if you please use this to check:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Good luck.

• Hello problem for guys to see flash cc cc 2015

  Hello! IM of the Russia. I have adobe flash cs6 previosly configuration and now when I download CC I see Flash CC 2015 in list of CC10 - only option to patch my old CS6 Flash apps.

  Am I doing something wrong?

  Your operating system meets the criteria to run Flash CC 2015?

  System requirements | Flash Professional

• Compaq presario seeing of green power SR1504x

  Hello

  My compaq power light started to blink every 2 seconds. The computer works well. Starts, loads fine, in other words, it works well. Any idea from her do it? I have not installed or changed anything.

  Thank you

  Hello dotdot65,

  I don't think you need to do a full restore. There is a chance that it was just a small problem and this won't happen again. There is a chance that if it repeated the steps I gave will help fix. There is a chance that it's your power supply dying.

  We won't know until we see what's happening over the next few weeks (ish) little.

  A full restore is not necessary and will not help solve the problem.

• Seeing E2500 to power flashes; cannot reset

  I have E2500 wireless router and have used fine for more than 6 months.  Today, I needed a direct connection to my computer so I unplugged the cable from my router and connected on my computer, worked well.  When I had finished, I plugged the cable on the router and tried to connect to the radio but I could find is no longer the signal from the router.  I tried resetting by disconnecting and reconnecting the device and the computer, but nothing helped.  On the back, the power light flashes and will not stop.  I tried to reset the unit by pressing the button down for 30 + dry and nothing happens just the power supply light continues to blink.  I even re-inserted the installation disk, but he cannot do anything because it can not find the router.  I have no idea what to do next, any help or suggestion would be much appreciated as I spent the last 5 hours, frustrating me.

  Thank you

  -Jeff

  jvgroom, a power indicator light flashes could mean a hardware or firmware issue. Connect a computer to the router and use the computer to PING 192.168.1.1 if you get 4 answers, you can still be able to update the firmware on the router via the router page or via a TFTP file.

  Please visit this link. http://KB.Linksys.com/Linksys/UKP.aspx?VW=1&docid=8a3567e58c834e7485042cd8851b2776_4573.XML&PID=80&r...

• I can't yet see flash players in firefox after uninstall and reinstall of firefox and flash several times. How can I fix this permanent?

  I can go in chrome without any problem and watch any video without any problem. the second I get into firefox, nothing does. I had this problem on and off for years. I really don't see why you can't solve the problem, if anyone can. I uninstalled and reinstalled firefox and flash player several times. nothing seems to work. I am really really tired of this same problem for years, I stay with firefox, because you are aware of privacy and are always more. I don't know what other details to tell keep you other than that just to be and it makes it very difficult to do anything on firefox, when I can't use something simple like the flash drive. as I said, if other browsers can remedy I see no reason why firefox can not year after year. I hope there is a solution to this problem because it basically stopped a lot of my work on the net that I will no longer use google or microsoft. Thank you

  If you use extensions (Firefox/tools > Modules > Extensions) which can block content (e.g., Adblock Plus, NoScript, Flash Block, Ghostery) then make sure that these extensions are not blocking content.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• nothing else that firefox can see flash 10.3

  I've recently switched to Flash 10.3, but nothing on my computer is now the flash player detection. is it possible to have two versions of flash but only have firefox use 10.3? I had already tried to install the latest version of flash again, but it makes firefox run VERY SLOWLY until I realized that firefox has tried to use both versions of flash at the same time.

  Not sure I understand on Firefox, try to use both versions of Flash.

  You seem to be using Windows Vista and so I imagine that you have Internet Explorer (IE) installed by default. IE uses a Flash Player completely different and who may have a different version number the one installed on Firefox.

  Maybe you've tried inadvertently to install the version of IE of Flash 10.3

  • Check the IE and that it has updated Flash Player installed. Make sure it's the version of IE.
    See http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html
  • Try installing the good and the latest version of Flash Player in Firefox, this time to make sure it's the version of Firefox installed
    See install the Flash plugin to display videos, animations and games
    • If you have problems with Firefox and Flash Player it may be interesting to experiment with disabling protected Adobe in Firefox mode
      See http://kb.mozillazine.org/Flash#Flash_Player_11.3_Protected_Mode_-_Windows

  Read related articles and after return to how you will.

• LaskerJet HP 1022: Having problems printing. Seeing flashes and does not turn off.

  I have problems printing.  I turned the printer on / off power several times to cancel the print job.  There is a red light flashing and I am unable to stop after pressing several buttons.  I apologize because I don't have a book.

  Here is your complete support page.

  http://support.HP.com/us-en/product/HP-LaserJet-1000-Printer-series/439424/model/439431/manuals

  Download your User Guide and read.  Here he also troubleshooting for you.  Good luck.

• Why can I not use the executable Flash on my computer to see Flash in FF?

  I was able to get the Flash player installed on my work computer (I don't have administrator rights). It allows me to see the Flash in IE8, but I can't FF8 to use it.

  I realize it is a plug-in, but are there not also the possibility to install applications to run programs?

  There are two different versions of Flash for Windows, ActiveX for IE version and the version of the plugin used by Firefox and other browsers.