Seeing flashing deskjet 3845.

the light is blinkung and the printer offline apears. HP deskjet 3845 Windows 7

I had the problem, no more. Open the hood before, wait for the stay of the cartridge in the Center, turn off the printer, close the lid and the problem will be gone. This is the kind of reset or it is but works.

Tags: HP Printers

Similar Questions

  • DeskJet 3845 trouble

    My DeskJet 3845 has stopped working.   When you try to print, I get a message... "is in error state".   I replaced the color and the blackcartidges but without result.   Ditto with the re-boot and remove and then reinstall the device.   My devices of the record shows that I'm now on (copy 3) well that no one else will appear and Ctrl-P prints a page showing a choice of 4 HP 3845 printer (0 to 3), including any print and #3 giving the "... is in an error state" message. "   What can I do to activate things correctly?   When it runs, it gave good results, but not now.

    Hi @BrianJoyce,

    I am very pleased to learn that I was able to help you resolve the problem with the printer.

    When the printer is already installed and add you it back the computer, it creates copies.

  • DeskJet 3845

    My Deskjet 3845 printer works well but I need help to get the right sequence of commands to use to print a booklet.   The book is in Publisher and goes up to 52 pages A5.   I want the result to be a book of 13 sheets of A4 size paper that folds into an A5 booklet.   Can guide you me, step by step, through the process, please?

    Thanks for this direction.   I went to her and tried to follow the instructions but still get in a bit of a mess with getting the pages in the correct order.      I continue to try, though, until I understand well even if it uses the ink and paper in the process.   But thank you, whatever!

    Brian

  • Problems with the HP Deskjet 3845 in Windows 7 installation

    I could not well my HP model on the list and Windows Update was unable to get a list of devices in Windows Update, when I tried to install the HP Deskjet 3845 manually in Windows 7.

    Hello world

    The driver is already built into Windows 7. Follow the instructions below to install the appropriate driver.

    1. plug the USB cable from the printer to the computer.

    2. If you already ran the Windows Update, your printer must be installed using the driver that is included in Windows 7. If it is not updated with a driver appropriate to continue with the steps below.

    3. open devices and printers

    4. click on add a printer

    5. click on Windows Update

    6. when the update finished scroll HP on the left pane and select HP Deskjet 3840 series from the list of available printers.

    7 follow the instructions on the screen to complete the installation.

  • Printer HP Deskjet 3845 print in purple instead of black

    I just changed the ink on my HP Deskjet 3845 printer cartridges and now it started printing everything in purple. Before changing the cartridge, the colors were very good. I tried the contact on the cleaning cartridges and that did not help. There is no error message. I tried to put the old black cartridge in to test it, and even though it was really faded, it was printing in black. Color ink seems to work very well I printed a test page and the colors are out. I also tried to print that a document without any ink color in and a blank page came out. The problem must be something to do with the black ink cartridge, but I don't know what it is or what to do!

    Hi paterson14,

    Is the cartridge OEM new or revised?

    This cartridge is defective. You have to buy another cartridge installed in the printer. Let me know what you find?

  • Cannot print from Microsoft Office Home and Student 2010 military appreciation Edition on my HP Deskjet 3845.

    I have a new HP laptop and you tried to print with my HP Deskjet 3845. The only time it will print is when I troubleshoot or print my tax form. I have the pack family of software Office home and student 2010 Microsoft in the edition of military reconnaissance, but I got to the origin of Microsoft XP. They are not compatible? I'm just a user, and technical jargon goes over my head. I already go to solve problems and have not been able to solve my problem.

    Hi Jayne'sWarlock,.

    What happens when you try to print? What version of Windows do you have? Make sure you have the latest printer driver installed for the version of Windows you are using. Click here for options.

  • DeskJet 3845 Windows 7 drivers

    I have a new Win7 machine and cannot load drivers for my DeskJet 3845.  I looked through the discussion forums and of course have tried this link http://support.hp.com/us-en/document/c01874792

    Other people seem to have been able to solve this problem with this printer out of previous discussions.  However, they did not work for me and I called HP support and they told me that it is no longer a driver available for this printer for Win7.  Can someone please verify this for me?  Or preferably, tell me where I can find the driver?  Thank you

    Yes, the 990c driver will work with your 3845. If you get this error message, it is something wrong with your WINDOWS. Try to restart the computer and repeat the steps.

    Also, there is no direct download for it.

  • DeskJet 3845 prints blank pages

    I got the Deskjet 3845 printer for 6 years and I have not used for 1.5 years. I tried to get going again and every time I try to print, it prints blank pages. I just bought a new black ink cartridge and I removed the light orange Ribbon. I have Windows 8 and it's an old printer, so I don't know if it's a compatibility issue. I used printing HP and doctor scan and it said my printer was ok. However, when I printed a test page, it was empty. I'm totally stumped and I appreciate any help!

    All the best,

    Kyle

    I'm sorry you have a problem with the printing of blank pages. It seems you have the problem of material with the cartridges or the printhead. More he to sit upwards and not in use, the cartridges and printheads can dry out.

    Here is a link that can help you with this problem.

    http://support.HP.com/us-en/document/c01892627

    '"Click the WHITE STAR if you want to say thank YOU" '

    Let me know if it helps.

  • "Printer: door open" error on HP Deskjet 3845

    The green light on my HP Deskjet 3845 printer continues to blink.  Whenever I try to print something, even a test page, the error message says "printer: open door."  However, I checked several times and there is no open door!

    I am on Windows 7 (64-bit) and I'm on with a jetpack from verizon wireless.

    I'd appreciate any help!

    Thank you!

    Generally when this starts to happen, it is because the door sensor went out. There is only a reset you can do to try and clear the error and it is a hard reset. I will include the instructions below. If this does not work, you will need to replace the printer.

    To do a hard reset:
    1. make sure that the printer is turned on.
    2. pull on the power cord from the printer.
    3. pull out the power cord from the wall.
    4. wait for 30 seconds.
    5. plug in the printer and turn it on.

  • DeskJet 3845: deskjet 3845 paper not feed

    My Deskjet 3845 won't feed paper.  It was working fine and all of a sudden everything just stopped feeding paper.   I tried running the self-test by holding down the power button / stop and opening and closing door four times.   Systematic post, but it won't pull the paper.   I opened the back and checked the paper roll.  It seems - noevidence of any accumulation.  Then he touches, it feels like soft rubber, so I don't think that's the problem.  All the ideas!

    You were correct.  My 3845 had a hardware problem.   I hated to throw my 3845 followers, so I removed the top cover.  The problem is obvious - when he tried to print a test page, gray plastic gears at the end of the feed roller just spun.  The feed roller does not turn.

    To fix this, I drilled a 1/16"hole in the hub of the wheel in plastic and in the supply roll on a 1/8".  This required a wet strand.  Then, I inserted a piece of steel (a piece of a small nail) in the drilled hole rod, passing through the hub and in the feed roller.  I then epoxyed the stem in place and leave to harden for 24 hours.    Make sure you blow the shavings of metal and the dust of the printer with a lot of compressed air!

    The printer now works fine.

    At past total: $4 hardened forest, epoxy $5, I have time to time.

    Feel free to pass along this correction for someone else who needs it.

  • Hello problem for guys to see flash cc cc 2015

    Hello! IM of the Russia. I have adobe flash cs6 previosly configuration and now when I download CC I see Flash CC 2015 in list of CC10 - only option to patch my old CS6 Flash apps.

    Am I doing something wrong?

    Your operating system meets the criteria to run Flash CC 2015?

    System requirements | Flash Professional

  • Button flashing Deskjet D2360 attention

    The attention on my Deskjet D2360 button is flashing all the time, no obvious cause - no paper jam and have replaced two ink cartridges.  I noticed that when I open and close the top that the print head is not everything are the usual movements, just a little.  Any ideas gratefully received am lost without it!

    Thank you very much

    Bren

    Hello brenlondon,

    I see that the D2360 attention flashes, you have checked for the paper is stuck and I noticed that the transport is not mobile quite as it should.

    With what you said about the transport and what this guide suggests: power LED flashes, it would seem that there is a traffic jam in the printer.

    Try the steps suggested portion of carriage jam and let me know if it helps.

    Kind regards

  • I can't yet see flash players in firefox after uninstall and reinstall of firefox and flash several times. How can I fix this permanent?

    I can go in chrome without any problem and watch any video without any problem. the second I get into firefox, nothing does. I had this problem on and off for years. I really don't see why you can't solve the problem, if anyone can. I uninstalled and reinstalled firefox and flash player several times. nothing seems to work. I am really really tired of this same problem for years, I stay with firefox, because you are aware of privacy and are always more. I don't know what other details to tell keep you other than that just to be and it makes it very difficult to do anything on firefox, when I can't use something simple like the flash drive. as I said, if other browsers can remedy I see no reason why firefox can not year after year. I hope there is a solution to this problem because it basically stopped a lot of my work on the net that I will no longer use google or microsoft. Thank you

    If you use extensions (Firefox/tools > Modules > Extensions) which can block content (e.g., Adblock Plus, NoScript, Flash Block, Ghostery) then make sure that these extensions are not blocking content.

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

    • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
    • Do NOT click on the reset button on the startup window Mode safe

  • nothing else that firefox can see flash 10.3

    I've recently switched to Flash 10.3, but nothing on my computer is now the flash player detection. is it possible to have two versions of flash but only have firefox use 10.3? I had already tried to install the latest version of flash again, but it makes firefox run VERY SLOWLY until I realized that firefox has tried to use both versions of flash at the same time.

    Not sure I understand on Firefox, try to use both versions of Flash.

    You seem to be using Windows Vista and so I imagine that you have Internet Explorer (IE) installed by default. IE uses a Flash Player completely different and who may have a different version number the one installed on Firefox.

    Maybe you've tried inadvertently to install the version of IE of Flash 10.3

    Read related articles and after return to how you will.

  • Why can I not use the executable Flash on my computer to see Flash in FF?

    I was able to get the Flash player installed on my work computer (I don't have administrator rights). It allows me to see the Flash in IE8, but I can't FF8 to use it.

    I realize it is a plug-in, but are there not also the possibility to install applications to run programs?

    There are two different versions of Flash for Windows, ActiveX for IE version and the version of the plugin used by Firefox and other browsers.

Maybe you are looking for