Select the computer name of the machine running a WebForm (10g)

Similar Questions

• I choose the computer name of the machine running a SQL script

  Hello. I am looking for a way to select the computer name of the machine running a SQL script. Is this possible?
  
  I tried the following, but it does not work. Any suggestions?
  
  Select % computername % of double;

  http://www.Oracle.com/technology/oramag/code/tips2003/011903.html

  Check this link see if it helps.

  Concerning

  REDA

• When I start the machine, continuous hard drive work for almost 1/2 hour, meanwhile if I open a program, the machine runs very slowly. Help solve the problem please

  I have wndow XP Home edition service pack 3 installed on my lap top. When I start the computer the hard drive continues to work for almost 1/2 hour; Meanwhile, if I open IE, or any program, the machine runs very slowly and I just can not open the program up until the drive hard light is off. Please help solve the problem

  How much RAM you have on your system? (Right click on "My Computer"-> properties)

  As a general rule, Windows XP does not work well if you have less than 1 GB or more of RAM.  What usually happens is that your RAM capacity is exceeded leading to overflow on virtual memory (the drive) to compensate for the need of RAM in the computer.  This causes your system to beat on your hard drive and slow down your system.

  If this is your problem, the options are to increase the RAM on your system or decrease the non-essential programs that launch at startup on your computer using a tool like Autoruns.

  HTH,
  JW

• If I create a WinPE 2.0 distribution (Syslinux or PXElinux) which will take place on one of the machines running 'something Microsoft' what are the implications of license?

  The WinPE Licensing implications

  Hello

  I have a number of customers with machines that are fully licensed with XP, XPe or Vista.
  Each of these clients have a device that we have created, piloted by drivers custom within the OS.  The operating system will sometimes funny (corruption, etc.) causing the device to not function.
  I decided to create a diagnostic utility to check whether the fault is in the operating system, driver or device.  Because the fault could be deep in the operating system, the only way I can see to do is through WinPE
  I searched the net, but can do not seem to arrive at an acceptable legitimate answer... So here's my question.
  If I create a WinPE 2.0 distribution, either for CD, USB or chain loaded from Linux (Syslinux or PXElinux) which will take place on one of the machines running 'something Microsoft' what are the implications of license? Is it legal?
  Operating system licenses are not owned by us, but our customers if we do not have mass of licensing agreements or something like that.
  The plan is to create a unique distribution and add drivers to it that we encounter different machines.  I know it's frowned upon to speak Hirens on a MS site, but something similar to that (I won't use Hirens because I want that it is completely legitimate)
  I called him to the reading of the license with WAIK, but can do not seem to find anything about this.
  Thank you

  Hello

  This is not a question of normal consumption. I suggest you to contact our Legal Department for legal terms Express. http://www.Microsoft.com/about/legal/en/us/default.aspx

  I also suggest that you send your query in TechNet and check.

  http://social.technet.Microsoft.com/forums/en-us/operationsmanagergeneral/threads

• Changing the host name of a Machine running ESXi4.1U2...

  Re: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 861

  in ESXi4.1U2 (note: ESXi ESX not)-I want to change the host name - refers only to ESX - and not all steps are relevant.

  After I'm on the way to do it for ESXi4.1U2-

  THX in advance,

  r

  First line (vim - cmd hostsvc/net/dns_info) would get only the host name, while the second line would be the main task of chaning the host name.

  Once you run the second line, just select another item in the client vSphere (such as data store) and then check back the "and DNS routing, so it'll be Refresh display data (for me, it automatically displays the changes).

  If you still get the same result and the host name has not changed, could check if you can change it via DCUI?

• Difference between the workstation and the machines virtual ESXi?

  Apart from convert vmdk of thin thickness oversupply, what exactly does the download feature in WS 8 and later versions do, vs, simply by making a copy + paste of the virtual machine to the machine running Workstation in the ESXi data store?

  Besides, why Upload even converts vmdk of thin thickness providing? You can create native thin disks configured in ESXi is not as if ESXi does not support the feature...

  VMware Workstation is not (cannot) use a provisioning. The hard format is a fragmented file format that contains metadata about the blocks of data used in the file itself. This format is not supported with ESXi, and this is why it must be converted.

  André

• The list of all names of virtual machines that are attached to the computer with script group

  I need a script that would list all the virtual machines names that are attached to the Machine group as the bellows screenshot:

  

  
  

  Ce can be in any language I just need to get this information.

  I tried to Watch in database and found vm names of in table [ecm_dat_machines] and Group of/ids in names of table [ecm_sysdat_machine_groups] but I don't find table that would be assign vm to the Group.

  I serait appreciate any help or clue as I already spent a lot of time on this task.

  Attached file of import/export includes a view created for the SQL below, as well as a SQL report that uses this perspective to the computers by group in the VCM UI.

  Note that the functions used in the join of the query criteria are there to ensure that only valid/active/license machines are displayed, these date data and time are adjusted to the time zone of the user, and that the users do not see that their role does not have access to groups of computers.

  SELECT

  m.machine_name,

  mg.machine_group_name,

  mg.machine_group_desc,

  DATEADD (mi, utc.utc_offset, m.date_last_contact) as date_last_contact

  OF dbo.ecm_dat_machine_group_machines_xref mgx

  JOIN dbo.ecm_dat_machines m

  ON mgx.machine_id = m.machine_id

  Join dbo.ecm_dat_machine_groups mg

  ON mgx.machine_group_id = mg.machine_group_id

  JOIN dbo.ecm_dat_roles_machine_group_xref rmx

  ON mgx.machine_group_id = rmx.machine_group_id

  AND rmx.role_id = dbo.role_current)

  JOIN dbo.ecm_fn_machines_valid_t (vm)

  ON mgx.machine_id = vm.machine_id

  JOIN dbo.ecm_user_utc_offset (utc)

  1 = 1

• How to change the name of VirtualSwitch without running virtual MAchines of braking?

  Does anyone know how to change the name of the virtual switch (used by VM) without braking the VM running in this cluster?

  The best way to do this without losing network connectivity is add a group of ports with the new name and connect the virtual machines to the new group of port and when the initial group of port is empty remove - remember that it's the port group named not the vswitch.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• I have a Mac Book Air of 2015 running El Captain I see the airplay icon in my menu bar and I've upgraded to the latest version of the software on my AppleTV 2 but I can not Airpay icon on the menu bar of my mac to turn blue when I select the apple TV conn

  I have a Mac Book Air of 2015 running El Captain I see the airplay icon in my menu bar and I've upgraded to the latest version of the software on my AppleTV 2, but I can't get the Airpay icon on the menu bar of my mac to turn blue when I select the apple TV connected to a HD from LG smart TV. Help!

  Hi, Arghbee1.

  Please visit Apple support communities.

  I understand that you are unable to AirPlay from your Mac to your Apple TV.  Here are some troubleshooting steps that I recommend to go through this problem.

  Get help

  If you do not see the AirPlay icon , make sure that your Apple TV is awake and that it meets the system requirements.

  If you do not see your Apple TV in the AirPlay menu, make sure that your Mac and Apple TV comply with the system requirementsand your software from the Apple TV is updated. Also check your firewall settings:

  1. Choose the Apple menu > System Preferences, click Security & Privacy, and then click the Firewall tab.
  2. Click the lock icon and enter an administrator name and password.
  3. Click Firewall Options.
  4. Deselect the option "block all incoming connections".
  5. Select the option "automatically allow signed software to receive incoming connections.

  If your office does not look great on your HDTV, high-definition TV could apply image quality improvements that are not the best for the computer images. Check the manual of your HDTV for more information on how to adjust your HDTV settings for use with a computer. Your HD TV could offer a more appropriate display mode, such as the computer or game mode mode. Also try adjusting the HDTV settings like sharpness, retail building and noise reduction.

  If you mirror your screen and the image correspond to your HDTV screen, you can adjust the size of the Office for the best image. Click the AirPlay icon, and then select an option under "game size desk to." If you fit to desktop size to your Apple TV, the image fills the screen HDTV but will not look as good on your Mac screen. Learn more about overscan and underscan and what you can do about it.

  If AirPlay disconnects itself, your wireless network can be too busy or have too many wireless interference to maintain the connection of the antenna. Learn how to solve the problems of Wi-Fi connectivity. The manual of your router network may have additional suggestions for maintaining a strong and fast connection with your devices.

  Use AirPlay to view a video of your Mac on a HDTV

  See you soon

• Windows Vista is freezing after brief use. It began after the machine has run an automatic update on Wednesday morning (11/11/09). Have their problems with the update?

  The machine is relatively new and was working perfectly until the upgrade.

  Hi iapr97

  Welcome to the Microsoft Answers Forum!

  We would like to know more information related to this topic

  ·         You receive a correct error message or error number when the computer crashes?

  ·         All updates were installed successfully? Are there updates failed?

  To check if there are updates failed, follow these steps

  i. Click Start, in the search box, type in update

  II. click on windows Update

  III. click view update history

  I recommend you to start the computer in a clean boot to determine if any third-party application is at the origin of the problem. To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to run check and clean boot if you have the problem.

  i. Click Start, type msconfig in the search box and press ENTER.

  II. If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  III. in the general tab, click Selective startup.

  IV. under Selective startup, clear the check box load startup items.

  v. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  VI. click OK.

  VII. When you are prompted, click on restart.

  VIII. after the computer starts, check if the problem is resolved.

  If the problem is resolved, check what is the cause of the problem, referring to the link given below: http://support.microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  i. Click Start, type msconfig.exe in the start search box and press ENTER.

  II. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  III. on the general tab, click the Normal startup option and then click OK.

  IV. When you are prompted to restart the computer, click on restart.

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to select the photos I want to import in the import Windows 7 Wizard, and how to change their name to a group of the name custom when importing?

  Has features missing from Windows XP in Windows 7?

  I'm doing a simple import of photos using the option 'Import pictures and videos using Windows' native Autoplay.

  In Windows XP, I could choose what images to import and give them all the basic name custom during the import process, with each photo added later with a "001", "002" etc using the scanner and Camera Wizard.  It is very convenient because it could have been hundreds of photos on some of my cards from a long period of shots, I could run the tool more than once for different groups of photos that I would choose Import, and the pictures would be get named sequentially and stored in their files you want immediately.  I imported thousands of photos in this way.

  This new tool for Windows 7 allows me to add tags to all of the photos on the cards and devices and name photos after their date, or on the label, or other combinations of that... but why doesn't this new tool in Windows 7 suppose I want to import every single photo on the card device / I just connect and more that I want them all to have the same tag assigned to them?  It's stupid and useless - there, makes only has pictures of a theme on their card at any time that they connect to import their photos and always wants to import everything each time?

  To illustrate this point, let's look at my current situation.  I'm just on vacation in Europe and took pictures to more than one place, I visited, of course and now I would like to mark photos with the location of the names individually... or even more, I would like to actually name photos when importing with the name of the place in the picture.  Scanner and digital camera Assistant & would do that, no problem - you just had to run the tool once for each different group name, then select the appropriate images to import with the same group name.  It has been easy.  This type of naming is far superior to the addition of tags to images named simple-list or date-wise because you can tell what the image file in your library that you want to open just by going to (or get) the group name.  Want to see pictures of St. Peter's Basilica?  If you named the photos with that (added with 001, 002 etc), then simply browse to that name in your folder of photos «The Italy, holiday 2010»  Without trying to find photos Tags into the sea by the name of "IMG20100324005" - soup and no program Photo Gallery Windows Live Photos or necessary Picasa.

  This new program in Windows 7 for the import of images does not appear to be able to handle the very handy feature of its predecessor Windows XP.  It's very frustrating to have opted for the version of Windows newer and supposed to be 'better' but find several programs that have been very useful for XP have valuable features removed or are no longer present at all (like how Windows 7 is no longer a Clipboard Viewer - that has great idea that is?).

  So is it possible to recover the image import feature I apparently lost by 'redevelopment' of Windows Windows 7?  I could of course go and buy an image import and edition program (Smart Photo Import very nice for the price, a quick search I just do), but as this feature was native in Windows XP it is still stupid to have to buy a 3rd party simply program now because Microsoft does not understand the idea of keeping popular features in their software and seems rather "he dumb down.

  Any help to select the pictures I want to import and naming them when importing with a custom group name using the import wizard would be greatly appreciated... + 10 GB of photos and videos of this trip is sitting & waiting for a solution!

  Has features missing from Windows XP in Windows 7?

  I'm doing a simple import of photos using the option 'Import pictures and videos using Windows' native Autoplay.

  In Windows XP, I could choose what images to import and give them all the basic name custom during the import process, with each photo added later with a "001", "002" etc using the scanner and Camera Wizard.  It is very convenient because it could have been hundreds of photos on some of my cards from a long period of shots, I could run the tool more than once for different groups of photos that I would choose Import, and the pictures would be get named sequentially and stored in their files you want immediately.  I imported thousands of photos in this way.

  This new tool for Windows 7 allows me to add tags to all of the photos on the cards and devices and name photos after their date, or on the label, or other combinations of that... but why doesn't this new tool in Windows 7 suppose I want to import every single photo on the card device / I just connect and more that I want them all to have the same tag assigned to them?  It's stupid and useless - there, makes only has pictures of a theme on their card at any time that they connect to import their photos and always wants to import everything each time?

  To illustrate this point, let's look at my current situation.  I'm just on vacation in Europe and took pictures to more than one place, I visited, of course and now I would like to mark photos with the location of the names individually... or even more, I would like to actually name photos when importing with the name of the place in the picture.  Scanner and digital camera Assistant & would do that, no problem - you just had to run the tool once for each different group name, then select the appropriate images to import with the same group name.  It has been easy.  This type of naming is far superior to the addition of tags to images named simple-list or date-wise because you can tell what the image file in your library that you want to open just by going to (or get) the group name.  Want to see pictures of St. Peter's Basilica?  If you named the photos with that (added with 001, 002 etc), then simply browse to that name in your folder of photos «The Italy, holiday 2010»  Without trying to find photos Tags into the sea by the name of "IMG20100324005" - soup and no program Photo Gallery Windows Live Photos or necessary Picasa.

  This new program in Windows 7 for the import of images does not appear to be able to handle the very handy feature of its predecessor Windows XP.  It's very frustrating to have opted for the version of Windows newer and supposed to be 'better' but find several programs that have been very useful for XP have valuable features removed or are no longer present at all (like how Windows 7 is no longer a Clipboard Viewer - that has great idea that is?).

  So is it possible to recover the image import feature I apparently lost by 'redevelopment' of Windows Windows 7?  I could of course go and buy an image import and edition program (Smart Photo Import very nice for the price, a quick search I just do), but as this feature was native in Windows XP it is still stupid to have to buy a 3rd party simply program now because Microsoft does not understand the idea of keeping popular features in their software and seems rather "he dumb down.

  Any help to select the pictures I want to import and naming them when importing with a custom group name using the import wizard would be greatly appreciated... + 10 GB of photos and videos of this trip is sitting & waiting for a solution!

  ===========================================
  Perhaps the following links will propose a few ideas:

  Windows 7 - change settings for importing pictures and videos
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-importing-pictures-and-videos
  (don't forget to extend "Import in the view settings" at the bottom of the page)

  Windows 7 - How to make photos from my camera to my computer?
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-get-pictures-from-my-camera-to-my-computer

  You might find the free Picasa software or Windows Live Photo Gallery
  to be useful:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Download Windows live Photo Gallery
  http://explore.live.com/Windows-Live-Photo-Gallery
  (There are other applications included in the download...
  Uncheck the ones you don't want)

  Picasa
  http://Picasa.Google.com/

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Should I apply the different computer names to my Win7 32-bit and 64-bit installations?

  I have Win7 Pro x 64 (64-bit) retail installed on my first hard drive and Win7 Pro x 86 (32 bit) OEM on my second hard drive (such as insurance, in the case that some of my programs and games do not run in Win7 64 bit).  At the beginning of each installation, Win7 request your screen name and the computer name.

  Given that the two Win7s are installed in the same machine, and I have another hard drive as my Backup Master, should I give my Win7s the different computer names?  I think I have to, because I think I run the risk of my backup of 64 - bit crushing my 32-bit backup and my 32-bit crushing my 64-bit support. whenever I run a backup of a BONE followed by another...

  If you have both installed on separate partitions/hard disks, they are considered separate or computers, facilities so yes, both must have unique names.

• software isinstalled, but message comes up to make sure that your device is connected, the computer is not reconizing machine

  the software is installed, but message keeps occurring that make sure your device is connected.

  Hello

  Thanks for posting your query in the Microsoft Community Forums.

  According to the description, it seems that you are facing problems with the connection of the device that you get an error message "make sure that your device is connected, the computer is not reconizing machine." I'll be happy to help you with this problem.

  (1) device you're trying to connect?

  (2) how you try to connect the device?

  (3) what software is installed? Are what software you referring?

  (4) have you made changes on the computer before this problem?

  Method 1: I suggest you follow the steps in the link to run the troubleshooter and check if that helps.
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: You can also try uninstalling and reinstalling the drivers and check if the problem persists.

  To resolve this issue, follow these steps:

  1. to open Device Manager, click Start, click files, and research programsand typeDevice Manager. A list of the available items will appear above the search box; Click onDevice Manager. Device Manager opens with the name of your computer to the top and a list of the devices installed on your computer under the name of your computer.

  2. Locate the faulty device in the list of devices, right-click on the device, and then clickUninstall. When a warning message that you uninstall a device in your system, clickOK. Device Manager uninstall the device.

  3. right click on the name of your computer in the Device Manager, then click on Search the hardware changes. Device Manager scan your system and reinstall your device automatically.

  4 right click on the device, and then click Properties. Thegeneral of the device, in theState of the device Properties dialog box tab, you should see the message. This device does not work correctly.

  I hope this helps. Try the above steps and get back to us for further assistance if you have questions about the Windows operating system. We will be happy to help you.

• the computer is configured to automatically run programs at startup detected

  I have windows 7... computer running very slow when I start the pc, or even to open internet programs... don't have a full scan virus no nothing...

  When I check the performance he said: convenience store has made some changes to your system.try to try the task you were trying to

  do before.

  and she said then in a pox: problems

  the computer is configured to automatically start detectet and a yellow triangle with an exclamation point

  could you please tell me how solve the problem... thank you so much manual

  Hello

  Use the startup clean and other methods to try to determine the cause of and/or
  eliminate problems.

  ---------------------------------------------------------------

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Include
  everything you've ALWAYS had on this machine, including those you have uninstalled (they
  remains of leave behind which can cause strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows
  Vista or Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  Optimize Windows 7 for better performance
  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Open the troubleshooter of Peformance
  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  To see everything that is in charge of startup - wait a few minutes without doing anything-
  then right click on taskbar - task manager - take a look at stored by -
  Process - Services - this is a quick reference (if you have a little box on)
  Lower left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Is a quick check to see who are loading method 2 - using MSCONFIG
  then after a list of these here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what files, registry keys, and other objects
  processes have open, which DLLs they have loaded and more. This unique
  powerful utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically
  When your system boots and you connect. Autoruns also shows you the complete list
  locations of registry and files where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor file system, registry, process, thread and DLL
  activity in real time.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are
  loaded automatically when Windows starts. For each application, what follows
  the information is displayed: Type of startup (registry/Startup folder), Command - Line
  Channel file, the product name, Version, company name, location in the registry or
  file system and more. It allows you to easily disable or remove unwanted programs
  that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe
  not. The window Watcher says it all, every window created by each execution of the statement
  program, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded
  on your system. For each driver in the list, additional useful information is
  Poster: load address of the driver, description, version, product name,.
  company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit Maker as replacements and system manufacturer of device which are
  the most recent. Control Panel - write - graphics card - device manager
  the brand and complete model of your video card - double click - tab of the driver-
  Note the version information. Now click on UPdate Driver (this can do nothing
  MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
  If there are 3rd party with their own software and drivers and the other main device drivers
  you have.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
  and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
  their latest versions. (Look for the system to update the BIOS, Chipset and software updates
  Site of the manufacturer here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
  REBOOT after each installation.

  Always check in the Device Manager - drivers tab to be sure the version you are
  installation actually appears. This is because that some rollback of drivers before the
  later is installed (particularly that audio drivers) so install a driver - reboot.
  Make sure that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
  SCANNER - check manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using
  the above methods is preferable to ensure the latest drivers from the manufacturer of system
  and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable driver facilities
  in the updates of Windows, which leaves on Windows updates, but it will not be installed
  pilots who are generally older and cause problems. If updates provides a new
  driver then hide it (right click on it) and then go get new ones manually if
  you want.

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for the)
  Professional, comprehensive and Enterprise edition)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ===========================================

  Refer to these discussions because many more excellent advice however remember to check
  your antivirus, the main drivers and BIOS update programs and also to solve problems
  with the first method cleanboot.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Access the cluster from a virtual computer name

  Is it possible to create a property that accesses on behalf of cluster a virtual machine is running, like this:

  Get - vm | Select the name,

  @{n = "cluster"; e = {GetTheClusterNameSomehow}}

  ?

  Thank you!

  Something like this should do the trick.

  $vm = Get-VM -Name MyVM$vm | Select Name,@{n="Cluster";E={  $rp = Get-View $_.ExtensionData.ResourcePool  $parent = Get-View $rp.Parent  While ($parent -isnot [VMware.Vim.ClusterComputeResource]){    $parent = Get-View $parent.Parent  }  $parent.Name}}