Selection of different parts of the questions of chronology

Similar Questions

• Pages - selection of different parts of the text at the same time

  The old version of Pages used to have a really useful feature that allowed you to select the different parts of a text at the same time by pressing the command at the same time you did drag the cursor over the text you want to select.

  This feature doesn't seem to be available on the new version, which is a shame because it was really, really useful.

  Is there another way to select different parts of a text at the same time?

  I would be really grateful if someone could find a solution!

  Any rejection of Pages v5 supports non-contiguous text selection. No tricks to work around this design limitation. You may always continue to use Pages ' 09 v4.3 If you wanted these "professional" features of return.

• Best way to add words to the different parts of the frame?

  There are sometimes opportunities when I want to put the text on different parts of the screen, possibly with different fonts sizes and colors etc.

  On this occasion, I'm going to fill in the spaces in the jury of the Clap below.

  Is there a quick way to do it using a single title I can position each word (or groups of words) exactly where I want to?

  Or do I just add writing in Photoshop? This would limit still edit in FCP X.

  To add the likelihood that I will use fonts like marker felt, slate etc.

  

  Change the fonts and sizes is normally done in any title - just select the text and apply the changes. No need for a special title for this.

  To move the text independently:

  It is very easy to create a title in movement with more than one piece of text - this is a title with two layers of separate text:

  

  By posting the Position for each text, you can place and move independently.

  This will appear in the tab title of the Inspector instead of the video tab.

  In a quick test, I could not change the name of the parameter, but it works very well

  :

  

  

• Why don't the mpg2 files allow to move to different parts of the clip in XP? Vista lets me.

  Hello.

  Why don't the mpg2 files allow to move to different parts of the clip in XP? Vista lets me.

  Desktop: Windows XP 32-bit Home Edition. Laptop: Windows Vista Home Premium 64-bit.

  I have a DVD I paid for and used a software to copy video clips (unprotected) to mpeg2 files. There are 4 of them. It was a DVD recorded in 2004 at a dance event. It is not a commercial version.

  XP: The 1st clip allows me to open it in Windows Media Player 11 and I can drag autour in various places to look at different times of the clip. The clip of 2nd, 3rd and 4th are locked and won't let me pick different times to watch. They will play through.

  In Vista: I can't the cursor around anywhere, then select any time to look into all parts of clips with THE 4 clips.

  I took the clips, put them on a USB stick, moved in both sense between each system. I tried two more than once.

  I used the software to rip the clips on XP and Vista. It's the same result. The fault seems to lie with XP.

  Perhaps some of this DVD had some kind of protection against copying for XP but not Vista (and other OS of potentially). Or it's the encoder?

  My account has been locked or something, I couldn't answer.

  It is therefore probably encriptación with Windows Media player. I can read files with RealPlayer on Windows XP and Vista in Windows Media Player.

  Tried to use my software for video editing, re - export files in mpeg2. But each of them had sound problems. So, this is how the DVD is probably protected.

  I have something on Vista operating systems and a workaround with XP using RealPlayer for the original files. I'll keep looking. It's mine to archive all I want at this stage.

• In the visualization of my photos display problem: I have red spots in different parts of the pictures. Someone knows how to fix this?  I rebooted my MacBook Pro, but it does not solve the problem.

  In the visualization of my photos display problem: I have red spots in different parts of the pictures. Someone knows how to fix this?  I rebooted my MacBook Pro, but it does not solve the problem.

  Details please

  What version of Aperture? Is OS X 10.7.5 as you say correct for your OS? You shoot JPEG or RAW? If RAW device? Wharton has changed since this worked?

  LN

• How to divide the screen into two parts in order to see the two different parts of the same file? [Suggestion] [Android]

  I am Brazilian and I use Adobe Acrobat Reader DC a lot. I would suggest an implementation of features present in the PC, I missed a lot of things on Android, which is 'New window' or something like that, like split the screen into two parts in order to see the two different parts of the same file.

  For smartphones, its use is restricted, but for tablets, it can be really useful, because it allows the display of two distinct points of the same file,

  I have reduced considerably the use of paper using this application, however, I need to navigate the file always pick up a few points seen earlier, which causes a lot of discomfort compared to printed documents.

  This is a suggestion, but I would like it to be considered.

  Thank you for your request. We have taken note of the same and must try to integrate it into one of our future releases.

  Thank you.

• Apply different effects to different parts of the same text?

  I have a text logo, I want to keep intact (it is kerning) so everything is in a box.

  Let's say that:

  HelloNiceWeather

  I could apply different effects to different parts of the text? (for example I 'Hello' slide to the top of the bottom of the screen and 'Nice' from the top?)

  Thank you! It is appreciated

  To do this, you must create a mask around the letters that you don't need, using the pen tool.

  Check this part of the aid online to familiarize yourself with one of the most important tools of EI (once you understand how it works, and it's easy, you're going to release some gret inside AE power)

• by selecting a required part of the image in a batch

  There is a picture of Apple on white canvas. I want the cultures in a way so that my new image contains only a required part (apple only). To explain it clearly, I drew a rectangle around Apple and grapes. I just want what's inside the rectangle. I can't give the height and width to cut because I want to run this script on a lot of images that have different forms (for example apples and grapes here). Do I have to check every pixel to change color (from white to colour) so that I can get the height and width of the real part of every image or there is a better way.

  

  Just thinking about it with slight color differences. A layer of temperature setting can be added to turn the pure white bg, then use the trim command, the button remove the adjustment layer. who will do the trim of the cultures most close to the subject.

  

• Help in the selection of a part of the image and turn it into an object...

  Hello world

  I've never used Adobe, please bare with me. I have an image that has an object (a tree), I would like to extract and insert it into a different document. I spent a lot of time to clear the surrounding area of the photo to see it become white. I want to have nothing more than the tree. No white background or whatever it is. I know that this may be a very simple task, but as I said, I'm a newbie. Help, please!

  I have PSEv.8.

  I used the brush selection (A) tool that has worked well. After the selection is made (the "mobile dash" have been around the whole tree), I went to layer > new > layer by copying. This put the tree on its own layer.

  There were a couple of areas I've airbrushed with the Eraser tool. The checkerboard pattern indicates the transparency.

  You can copy & paste this selection into another file

  .

• How to select a different language during the installation of Vista on Satellite L30?

  At the start of the toshiba L30 first running windows vista basic in Dutch has been selected by mistake. The vista has been installed. I tried to format PC and reinstall windows vista basic to the General again, but it would still allow me select the English operating system.

  Unfortunately, it was a mistake, and I don't understand Dutch. Is thereany way I can reinstall the operating system in English. ?

  E-mail: [email protected]
  Thank you

  Matthew

  Hello Matthew

  Do you use any recovery DVDs delivered for installation of the OS? where you bought your laptop (country)?

• regexp_substr - how to search for two different words and result based on returning a different part of the string

  Hello everyone

  I fight with this regexp_substr and I wonder if there is a way to deal with it. I have two string type in a column with the following structure:

  structure 1 always starts with "app.catalog.school.", as the following three examples

  app.catalog.school.DB.BT

  app.catalog.school.B.FTA

  app.catalog.school.ACA.CD

  structure 2 always begins with "app.catalog.admin.", as the following three examples

  app.catalog.admin.C.ABC

  app.catalog.admin.BT.AP

  app.catalog.admin.MI.RT

  If the value of the field begins with "app.catalog.school." it should return everything after the last period (.) as follows

  BT

  FREE TRADE AGREEMENT

  CD

  If the value of the field begins with "app.catalog.admin." it should return the string between the third and fourth period (.) as follows

  C

  BT

  MI

  I actually have a solution to this:

  decode)

  regexp_substr (myfield, ' [^.] +' 1, 3), 'school', regexp_substr (myfield, ' [^.] +' 1, 5), "admin", regexp_substr (myfield, ' [^.] +' 1, 4)

  )

  I am not happy with the solution above using decode(). I think I should be able to solve this problem purely with reg_exp but after hours to try again without success. You have better solution/suggestion?

  I use Oracle version 10.2. Thank you very much.

  Oops: Oracle version 10.2, here to use regexp_replace

  WITH testdata UNTIL
  (SELECT 'app.catalog.school.DB.BT' FROM DUAL str

  UNION ALL

  SELECT 'app.catalog.admin.C.ABC' FROM DUAL
  )

  Select
  Str
  , regexp_replace (str, ' ^. * (admin | school\.)) [ ^.] +)\. ([^.] +). (* $', "\2") res
  of testdata

  RES STR

  "app.catalog.school.DB.BT" 'BT '.

  'app.catalog.admin.C.ABC' 'C '.

  to 11.x, we can use regexp_substr because he has this subexpression setting more pure accident.

  WITH testdata UNTIL
  (SELECT 'app.catalog.school.DB.BT' FROM DUAL str

  UNION ALL

  SELECT 'app.catalog.admin.C.ABC' FROM DUAL
  )

  Select
  Str
  , regexp_substr (str, ' (admin | school\.)) [ ^.] +)\. ([^.] +)', 1, 1, null, res) 2.
  of testdata

  STR	RES
  app.catalog.school.DB.BT	BT
  app.catalog.admin.C.ABC	C

  Post edited by: extended chris227

• addressing different parts of the sprite in function?

  So, I have this function to make a sprite on foot:

  function wlk() {}
  If (Key.isDown (Key.Right) |) Key.isDown (Key.LEFT) | Key.isDown (Key.UP) | {Key.isDown (Key.DOWN))}
  market ++; If (Walk > 2) {walk = 0 ;}
  Chibi.tunicpants1.rtleg._y = 4 + market;
  Chibi.tunicpants1.ltleg._y = 5 - walk;
  }
  
  }

  In the onEnterFrame looks like this:

  WLK();

  But what do I do to get the function to address different versions, such as

  Chibi.bluejeans1.rtleg._y = 4 + market;
  Chibi.bluejeans1.ltleg._y = 5 - walk;

  while I can each address type for the market accordingly, through something like

  WLK (tunicpants1);

  WLK (bluejeans1);

  WLK (tuxedopants1);

  and so on?

  I tried something like this:

  //----------

  function wlk(s:String) {}
  If (Key.isDown (Key.Right) |) Key.isDown (Key.LEFT) | Key.isDown (Key.UP) | {Key.isDown (Key.DOWN))}
  market ++; If (Walk > 2) {walk = 0 ;}
  Chibi.tunicpant [s].rtleg._y = 4 + market;
  Chibi.tunicpant [s].ltleg._y = 5 - walk;
  }
  
  }

  onEnterFrame = function() {}

  WLK (S1);
  WLK (sA1);

  ...

  //-------------

  but it did not work.

  From what I see in you, thhe here you probably want to do is...

  onEnterFrame = function() {}

  WLK ("tunicpants1");  Use quotation marks

  WLK ("bluejeans1");

  WLK ("tuxedopants1");

  and so on

  function wlk(s:String) {}
  If (Key.isDown (Key.Right) |) Key.isDown (Key.LEFT) | Key.isDown (Key.UP) | {Key.isDown (Key.DOWN))}
  market ++;

  If (Walk > 2) {walk = 0 ;}
  Chibi [s].rtleg._y = 4 + market;
  Chibi [s].ltleg._y = 5 - walk;
  }

  }

• Isolate the part of the question of the picture/texture

  Hello

  I have a photo (attached) and would like to make two things with him. (I hope one) focus on both the texture of terracotta of the vase and its wooden background to give the image contrast and b), repainting the Brown close to royal blue. I tried to do this by using the eyedropper and then Image. Adjustments | Replace the color, but because the vase itself is colored in a shade of Brown I find more blue to replace Brown as the color of the fence, it it also replaces the color of the vase.

  So, I need somehow to "raise" the vase of the image, and then repaint the fence in isolation and then put back the vase in the photo - but I don't know how to do this.

  Thanks for all the ideas.

  Steve

  

  Looks like you're new to Photoshop.  Learn about the masks.  It should be a trivial task to hide the vase and apply the adjustment just in the background.

• Printing of text selected cultures, one part of the first line - bug report 696566 - any input help or workarounds?

  Previous reports of this problem in this forum have had their closed discussions. It is still a bug in FF 17.0.1, and has a 696566 bug report. One suggested solution of definition of impression to 90% scale has no effect.

  Printing bug has now been fixed.

  change Some printing bugs have been fixed including some pdf issues and bug 684622
  

  Hope that your problems will be resolved in Firefox 21.
  Who will now average using night http://nightly.mozilla.org/

• Photoshop CC - can't control + click to select a different form while using the tool pen?

  I used the tool constantly feather in photoshop cs6 and would often use control + left click to select a different shape using the pen tool.

  Now, I have to switch to the move tool to select another layer? Why this feature has been removed / changed?

  Difficulty: After sleeping more, here is how I fixed it:

  The new Direct Select tool by default is set to layers "active." Switch to "all layers".

  

  Post edited by: Joe Horan

  A new problem = select several points with control + click + drag is to select all shape layers... Jesus Christ, why is this changed?

  I must now double click on the form I want to choose? Why? What is the point of this?