Send Fax from PC to HP Officejet 4500 all-in-One G510

Similar Questions

• to send a Fax from PC in HP Officejet 4500 All - in - One G510

  Today I purchased the above unit and connected via eithernet, but I'm not able to send the fax from PC as the printer/Fax icon does not appear in the PC.

  I have to send many faxes and I bought this machine after reviewing the data sheet that clearly mentions "PC FAX SEND ONLY.

  means I can send faxes from my PC directly without printing the page and implementation Pan Telec.

  I ask team HP to help me configure the printer

  Concerning

  MYM

  {Information}

  Hi sainmym,

  First make sure you have the driver of Fax installed in devices and printers and then when you go to send a fax from the printing application make sure you designate fax HP Officejet 4500 G510 driver. When you tap on print you get the fax to the step 3 dialog box.

  

• HP Officejet 4500 all-in - One Printer - G510g will not print * sends an e-mail to yahoo my Yahoo or att.

  Win 7. HP Officejet 4500 all-in-One Printer - G510g does not print e-mails generated by yahoo my Yahoo or att.

  * prints the header only. OK, Juno & Hotmail prints. Have tried to reinstall the software to print, etc..

  Thank you

  Com63

  I'm sorry you have a problem with the printing of Yahoo.

  See if you can print from another program, such as, (firefox, Safari, etc.).

• HP Officejet 4500 All - in - One Printer - G510g 8.1 windows installation 64 bit

  After running a HP Officejet 4500 All - in - One Printer - G510g two an old notebook Windows XP and 64-bit computer laptop, an ASUS Windows 8, subsequently updated article 8.1; I am now trying to install it to run from a laptop Toshiba Satellite NB10T-A Windows 8.1 64 bit, but without success.

  The original installation CD does not provide an installation but start up (probably because it is only compatible with Windows XP and 7.

  The site www.hp.com offers a download a driver for the printer to Windows 8,162 bit. Sounds to download very well. Unpack the file, said he set up, but in the end, the driver is not available.

  There is no option to uninstall, in Control Panel of configuration/Printers/software control panel.

  Without that driver, the system Windows 8.1 recognizes the printer and allows the simple printing applications of ffrom. However, it is not possible to use scanning options, which gives the error message that the driver is not available. HP or HP Document Manager Solution Center are installed.

  I tried printing HP and doctor Scan. It recognizes the printer on USB link, said that lack of drivers, downloads, unpacks and installs the drivers. But the printer icon in the control panel of configuration/Printers continues to have an alarm icon indicates that the printer is still missing drivers.

  I also tried installing HP Printer Wizard. The result is similar.

  Please tell us how I can install this equipment scanning options and make sure that the machine is compatible with 8.1 64-bit windows.

  Thank you

  Dear Rainbow 7000.

  Thanks for your help. I tried following your instructions - remove all files HP, starting in minimal mode, downloading and installing new. Also tried to disable the antivirus scanner. But in vain. The drivers scanner has not been installed.

  The 64-bit Installer driver downloaded, but did not complete installation despite the night running. Looking at the processes running in the Task Manager, the name of the installer is for a 32-bit Installer (see the screen attached capture). Could be the problem?

  After trying various alternatives to the procedure, I gave up and downloaded the base driver HP Officejet 4500 m G50g Corporate Edition 14.0 (link http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-110155-1&cc=pt&dlc=pt&lc=pt&os=4158&product=3919449&sw_lang= ). This download is recommended only for the professionals, which I am not - but nothing worked.

  This driver installed fine. He recognized the printer and scanner. The printer and the scanner properly. The menu shortcuts also work as previously.

  It looks like so there is something wrong with the installer 64 bit full feature software and driver. The solution for the other wil the same problem is to try the base driver - although it is for the professionals.

  Thanks for your help, and I hope this will help other users.

  Have a happy new year.

  -------------------------------------------------------------------------

  Screenshot of the name of the installer:

  

• HP Officejet 4500 All - in - One-hp officejet 4500 G510g P:

  Stampante Ho Una HPofficejet 4500g510g,.

  by the prima volta ho usato stessa cartucce Originali my ricaricate...

  Can Dell... MENTRE lampeggia it pulsating; Sul display e camera Che sta esguendo Dell MA closed... no fa niente!

  Ho tried ha resettarla... iniziando at Una focopia, sul device display "in copia" ma no lo fa...

  riceve i Comandi dal calcolatore, not li can...

  E ' da 4 anni Che C ' e Ho, quindi senza Assistenza...

  No Yes Cosa Posso fare...

  Hi @maryf78

  If you are using HP original cartridges on your Officejet 4500. Have you tried to clean the contacts of the cartridge and the contacts on the printer?

  More details in the link below...

  http://support.HP.com/us-en/product/HP-OfficeJet-4500-all-in-one-printer-series---G5/3919445/model/3919447/document/c01953073/

  

  

• Impossible to scan, fax, or copy of HP Officejet 6500 All-- E709a One in

  I can print from my HP Officejet 6500 All - in - One-E709a, but I can't scan, copy or fax.  All drivers and updates are underway; No recent updates have been made before the problems that occur. I use Windows 7 64-bit.  When the printer is turned on, it still shows Original charge, but no documents are in the charger or on the glass (I already cleaned the glass and have ensured that the lid is tightly).  I have problems to scan, copy and fax. The automatic document feeder works.  I tried to reset the printer several times.

  When I try to scan a document into the document feeder (it feeds through) or from the glass, I get varying answers - rarely, he asked well how I save/handle the doc (e.g., save them in pdf format), but the document does not actually scan and I'm headed to reload the document OR it displays no. Scanning Options. The document does not appear in my analysis.

  When I try to copy, it shows the document as copy, but there is a long delay before the progress bar occurs.  When I copy using the document feeder, I actually get a copy (rarely and always disappeared - looking) or copy prints white - two results are always followed by an error message to reload the document.  When you copy from the glass, the copy print in white with an error message to reload the document

  The same problems occur when you try to Fax.   If trying to scan, copy or fax, the printer does a lot of gears whirring noises.

  Again, I can print a document from my PC without any problem, the problem is limited to scanning, faxing and copying.

  I tried the doctor of printing & scanning HP.  It always stops at the HP Twain scanning stage, saying that the scanning process was cancelled by the user (not true).  When I click on continue, it proceeds to the stage of Test analysis, but nothing happens when I click the button of Scan Test.  It only will allow me to ignore at this point.   All the other steps show green checks.

  My first question is really going to reach the merits of the case, I heard you say that the printer produces noise, but if you lift the bar A) trip through the screen and the light cover B) up?

  In addition, perform both of these resets and I would like to know how they are!

  All-in-one HP printer reset - HP Officejet 6500 - YouTube'

  Have a great day!

• OfficeJet 4500 all-in-one wireless WIIL NOT STAY online! Help, please!

  Help, please! I am incredibly frustrated with my officejet 4500 all-in-in-one wireless. my printer won't stay not 'online' and when I check my wireless network, the printer is listed as offline as well. When I try to print, I get the message "offline". I downloaded it on every possible driver update, scan and fix the hp program and even uninstalled and reinstalled this printer at least 8 times. I'm at my wit's end.

  I turned off the printer, and when it turns on, a document or two will show, then if I try to print something again immediately, I am again in offline mode.

  I also tried the 'hard reset' options I don't read here, but again, no luck. I changed both printer cartridges.

  I have coursed through the troubleshooter at least 8 times, and who never really helped. Cannot get a consistent performance. of course, at the time wherever I decided to ask for help, I'm out of warranty.

  I really hope someone can help me. I confess that I have very limited computer, so all suggestions, please use very simple instructions...

  Am I the only one having this problem?

  I'm sorry that you are experiencing this issue. It seems that your router is hitting the printer on the network. You can try setting a STATIC IP ADDRESS for her. This will have the computer and the printer communication directly.

  Here is a link that will help you implement. Let me know if you have any questions on it, or if that helps.

  http://support.HP.com/us-en/document/c02790693

  You can also reset you router. Unplug it for 30 seconds and plug it in again.

• Cannot install OfficeJet 4500 All in One G510n-z

  
  

  Hi Jeff17866,

  I'm sorry to hear you had problems re - install your Officejet 4500 on your computer from HP, but with a little more information, I can certainly take an extra look in things

  1. what version of Windows do you have?

  2. connect the printer via USB, Ethernet or wireless?

  3. what happens when you try to install the printer? Is there an error message? If so, what would you say?

  4. do you mind if I ask you why you had to uninstall it in the first place? (He can give me a better idea as to what is happening now )

  Once I have that information I'll do my best to help you further!

• HP Officejet 4500 all-in-One wireless printer

  The OP is win7 64-bit.  Control Panel to say 'NOT INSTALLED driver FOR THE HP3CC282 (HP OFFICEJET 4500 G510n-z). However, the properties of the printer show that this version of the 6.1.7601.17514 driver is installed. Why he says miss me the driver when properties shows me it's there?

  OK, go ahead and uninstall the software from the Control Panel, and then install the full feature software.

  Once you have installed the software, let me know when the printer is connected and you can print.

• OfficeJet 4500: HP Officejet 4500 all-in-One Printer

  How can I find which edition of drivers I have download for my 4500 since there are different versions G510 (a, h g - n, etc.) and that there is no such index on my printer in order to avoid malfunctions?

  My serial No.: (deleted content)

  My FPU No.: CB867-64001

  Thank you

  Hi @TAXKOUTI,

  Welcome to the HP Forums!

  I understand you're wondering how to know which driver you need for your HP Officejet 4500 printer. I'm happy to help you!

  Please see this guide How can I find my model or printer number?

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope this helps!

• Redial/pause on officejet 4500 all-in-one

  How redial you a fax number in memory - to send a fax to the same number as before

  There are two options of renumbering on the 4500.  It can only be used if it has to redial when the recipient line is busy or unanswered.

  You can check the options under your FAX SETTINGS on the printer.

  I hope this helps.

• OfficeJet 4500 all-in-One Printer G510h - can't scan using the printer or HP Solution Center

  When I tried scanning document/image of my desktop with the use of the HP Solution Center, by pressing the button scan, printer/scanner does not react but simply go back to the home menu. I've tried a few things: reinstall the printer driver, restart the computer, unplug and turn on the printer, but it's the same thing happens again.  When I tried to scan the document/image directly from the printer/scanner, the following error message appears on the HP Solution Center:

  "An error has occurred with the HP scanning application. Try the following steps after each step, try to scan the image.
  -Restart the program
  -Restart the computer
  -Reinstall the HP Photosmart software that came with the device. »

  However, there is no HP Photosmart software supplied with the unit.

  Hello

  Please perform the below mentioned steps that should solve the problem.

  Click START > computer > C: > Program files > HP > Digital Imaging > Bin > right click on hpscnapp.exe, and then click SEND TO OFFICE.

  Back on the desktop, and then double-click the shortcut icon hpscnapp.exe , he would open the interface to start scanning.

  Kind regards
  Jabzi

  Help the community by marking this post.
  Your question has been answered? Mark it as a accepted Solution!
  See a great post? Give a Kudos!
  I work for HP

• HP Officejet 4500 all-in-one: do not print after a new router has been installed

  I recently got a router update Verizon Wireless. I updated the password key on my devices and also assured that the printer is visible from my PC. However since the upgrade, I can't anything to print.

  I tried whole process of turning off the printer and the router and the password rentering. The PC recogize the printer but there may some disconnect somewhere that I can't make impression - help...

  Thank you!

  Replacement/change your wireless router try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

• OfficeJet 4500 all-in-one on Mac OSX 10.5.8 will only print color

  I know how to pass parameters when printing to change it to black and white only. I'm going to the type of paper/quality. I change the 'plain paper '. and change in' grayscale' then check only "black cartridge. I tried to save this as a framework, but for some reason it always comes down to HP Premium Plus Photo paper type and goes to color. I can't have my settings to stay on grayscale with black cartridge only.

  I thought about it. Under the "Paper handling" option, there are different types of paper, you can choose. Apparently if you have 'paper without borders' (he missed for the 'paper suggested"a reason any), then it will use only HP Premium Photo paper. I changed this standard 'US letter'... then I can change the type of paper to "plain paper". It works very well after that.

  Nate

• OfficeJet 4500 All in one: Assistant.msi Support HP again trying to install

  I recently upgraded to Windows 10 and also installed the Support Assistant. Now every time I boot my system a pop box installation open saying it can't find HP_Support_Assistant.msi to install the Support Assistant. I don't know why this is happening because it is already installed. Please advise on how to address them. Thank you in advance!

  Hi @JEStolle,

  Welcome to the Forums of HP Support! I read your post and see that you have installed the software HP support Assistant and you get a message unable to find HP support Assistant software. I want to help you solve this problem. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  Run any Windows updates critical to see if that will help solve this problem.

  I suggest that you try to uninstall the HP Support Assistant software. Download and reinstall the HP Support Assistant.  If all goes well, a version update will fix the issue.

  Restart the computer.

  See if the error disappears, and if you open the HP support Assistant software now.

  If the problem persists, try to start in safe mode with network and then uninstall the HP Support Assistant software.  If you are able to complete uninstallation and then download and reinstall.

  HP Support Assistant

  You can take a look at this post by @densyo12 to see if it will be useful, Re: HP Support Assistant does not open.

  Please let me know the result and if there is anything else I can help you. Thank you.