My Satellite L450D-11W is slow after you complete Sytem restart

Similar Questions

• Re: Satellite L450D-11W-Question on upgrade

  Hello

  I've had my Toshiba Satellite L450D-11W laptop for about a year now and I play a lot of games. It has AMD Athlon x 2 Dual Core, 4 GB RAM and Windows 7 Pro (32), but it tends to create lots of lag and slow loading for the games I want to play. I was wondering if it was possible to upgrade my computers laptop AMD Athlon Quad Core or Quad Core Phenom processor.

  The thing is, it would be compatible? Wouldn't make much difference? Where can I buy products from processors for laptop? I'd be happy for some answers or advice.

  Thank you.

  Please check this Toshiba document initially - http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm

• Satellite A100 - Internet becomes slower after 10 minutes

  Hello

  the Satellite A100 worked well for a few years, the internet has become suddenly too slow after 10 minutes of the start.
  The laptop switched on the first time that the internet works very well the 10 first minutes then becomes slower and slower until almost no packets are received but the connection does not completely down.

  Suspected spyware, rootkit, is cleaning up, and then installed from the disk recovery

  Then I tried the same thing. Uninstalled the connection to the local network and then reinstalled from the Device Manager, nothing.
  I figured that the Ethernet port is a failure. Then I used an adapter usb-to-Ethernet D - Link is completely independent of the integrated Ethernet hardware. Nothing, same behavior, working, first fine then Firefox displays a downtime

  The modem, cable, internet are all very well since I have tested with a PC and a laptop Fujitsu (5 years) and they all work very well. Even the D-Link works fine.
  The Toshiba pc diagnostic tool specifically says "Network Fail", but it crashes exactly?

  An idea or a similar experience?

  Hello

  Hmmmmm... It sounds quite complicated.
  What is with WLAN? Have you noticed the same behavior using the WIFI connection?

• Satellite L450D-128 stops responding after about 2 minutes in Normal Mode

  Hello

  I just got a new Satellite L450D-128 running Windows 7.
  Whenever I run Windows in normal mode, all and stops responding for about 2 minutes after that the office and I have to manually turn off the laptop.

  When I run Windows in safe mode, it seems to work ok, but I prefer not having to use safe mode indefinitely.

  Anyone know how I might be able to solve this problem?

  Thanks in advance.

  Hello

  First try to retrieve the device.
  It's not difficult, and the whole process won't take long.

  Turn the unit on and press F8
  Then choose fix my computer-> Toshiba HDD recovery

  This will start the installation of the new.

  I think that this is necessary in order to check if this problem is not related to software compatibility issues

  If the question will always be present while we should follow the investigation
  I mean, in this case, that a hardware problem would be possible

• Satellite L450D - power but starts after 5 seconds?

  Hi all

  As the title says my satellite l450d has power going in when I press the power button. The green power light on the front of the laptop turns on, I also hear a commissioning cooling fan. The indicator light on the side for the dvd player also flashes on and off first. All this happens within 4-5 seconds of me by pressing the power button, you will hear then click on and the laptop goes dead. This occurs regardless if the battery is in or out.

  Any advice would be greatly appreciated.

  Thanks in advance.

  Hey,.

  To me, it looks like a hardware malfunction

  I found this interesting article on the Toshiba site:
  [What steps must be followed if your Toshiba laptop does not start? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=21]

  If it doesn t work you need help I think that an authorized service. Guys check the exact reason and can replace all the pieces of equipment because they can order them directly from Toshiba.

  Have you contacted already guys?

• Satellite 1410 714 extremely slow after replacing HARD drive

  Hello

  I have a Satellite 1410-714 which has had a hard drive failure. I replaced the drive, but now the computer is extremely slow. Windows has been reinstalled, it was really slow too much and now it takes minutes for windows to start.

  I suspect that something might have broken on the motherboard and the hard disk. I checked mobo replacement parts, but have not found anything for-714, so a 1410 mobo compatible? This model has a processor celeron 1.8.

  Thanks for help.

  Hannu

  Hello

  I can t think the motherboard is broken after replacing HARD drive.
  I suggest updating the BIOS first. Maybe your old BIOS have a few problems with the most recent HARD drive.
  Please check site driver Toshiba for the latest version of BIOS.

  Have you used any anties Virus applications?

• Satellite A200-1SM is slow after installing Vista

  Hello.

  I have a problem with my Satellite A200-1sm computer.
  Yesterday I installed Alcohol 120% program and something happened.
  My computer stoped working and a restart and blue screen.

  After that, I installed the Windows Vista again and installed the driver.
  My processor is slow (before this happened was 3.8 after 4.6 and 4.5 memory after 2.7) and my memory is slow.

  Help

  Hello

  I installed the tool Alcohol 120% a few months ago too and as far as I know this software creates virtual drives and you can emulate max 31 readers.

  I m not 100% sure, but maybe this could be the reason for your BSOD issues possibly the software isn't 100% compatible with vista OS.

  However, after installation since the laptop recovery CD uses the factory settings and should work fine. I don t think that your laptop works done slower, is that Toshiba picture (from recovery CD) contains a large number of programs that regulates the functions of the laptop and run in the background of the OS. These processes need resources from the laptop, and so the Vista experience index may change.

  This is why I am 100% sure that your laptop is ok.

  You should visit the Websites of Microsoft and should read a little about this index, and how it works.

  Good bye

• Satellite A660 - no audio output after you connect it to external speakers

  HI everyone, this is my first post and to vary, I have a problem.

  I have a Satellite A660 11 M and when I connect to a 2.1 system audio external on 3'5 mm jack plug I hear the sound of the harman/kardon speakers, but not the 2.1 System.
  I have an Asus eeepc and works very well. Cable flawless work, is something in the configuration.

  I update the realtek and nvidia drivers and still out of work. Always when I connect the cable, realtek config screen appears and select line, but in works of asus eeepc and the computer toshiba laptop not.

  Concerning

  Try to check the settings in Realtek HD audio Manager. You can find it in the control panel.
  Open it and right on the top of the Hill you will see the folder small yellow symbol.
  Click on it and select the option enable auto popup dialogue...

  After doing this connect external speakers and do not forget the good feature is defined.

  On the same principle, it works with a headset and it works fine on my Satellite A660. When I connect headset I hear his helmet only. With other words, sound signal goes to external display only.

  By the way: I use the original Toshiba recovery image with the factory settings and there is no problem.

• Satellite 1800 working extremely slow after reinstallation of the operating system

  I bought a second hand Satellite 1800. I gathered all the drivers on the site of producer s, but when I formatted the HARD drive and installed Windows XP Home edition (my own copy, not any supplied software) the laptop works extremely slow... before that during the process of reading/writing of HARD drive, you could hear that typical for the sound... now the hard drive is completely silent during operation as it's slow as hell...

  I tried to keep up with the web and it turns out that if I reinstalled the OS to Toshiba Recovery CD, it should do the thing... never mind, I didn't know I should have this CD when I bought it... so now I don't... Is there anything I could do about it?
  Help, please

  Q.

  Hello

  As far as I know, this camera comes with W98SE and WME. The recovery CD with operating system Windows XP Home edition for this device is not created by Toshiba.

  You can install Windows XP Home edition and use all the drivers for the Toshiba download site. I don t know how much RAM use this device, but if the unit has less than 128 MB of RAM you can't wait the machine runs fast.

• response of touch-pad slow after you download driver touchPad synaptic

  I use the Hp support assistant & after downloading the latest updates which has been "synaptic touchpad driver", I discovered that the response of touchpad has become slower than before

  Hello

  You have a few options in my opinion please find the given link could help you resolve your problem.

  The use and configuration of the touchpad

  
  

• the WAN connection becomes too slow after you have configured the VPN (Site Site)

  Hello

  I have two branches connected via WAN (MPLS) connection using two 2921 routers.the connection is 2 M.

  I set up a VPN between these two sites, but after the connection has become very slow.

  y at - it something I can do to speed up the speed of connection.

  VPN proposals are:

  Proposals of the phase 1: 3DES, pre-shared,.

  Phase 2 proposals: esp-3des esp-sha-hmac

  I don't think that lower levels of security proposals will add a lot to the speed...

  Hi Marc,

  one thing you should definitely is a hardware encryption go if you do not already tht, it also reduces the load on your cpu

  You can try other things is play with mtu, according to your line mtu and what applications are mainly used. try setting the mtu of at least 60 odd bytes lower than the mtu and also sometimes server line recommended mtu settings like server many have obligation to mtu to 1300 or 1400, if that's not it can cause a lot of re transmissions, you can also try fragmentation before encryption

  http://www.Cisco.com/en/us/docs/interfaces_modules/services_modules/VSPA/configuration/guide/ivmvpnb.PDF

• satellite 2520cdt is very slow after replacing HARD drive

  My Satellite 2520 CDT is the HARD Mk 4309 MAST 4.3 GB default disk. I replaced the with the Toshiba MK 2016 GAP of 20 GB.
  I use Windows 98 since the original installation CD. The laptop is now very slow, it takes minutes to start programs, etc.

  I installed the latest BIOS with no improvement. Probably the laptop cannot manage the size of the HARD drive.

  Is there a solution?

  Hello

  I had the same suggestion. I think that the large size of the HARD disk is responsible to slowly start performance. But I wonder why BIOS recognize the HARD drive?
  However, try to defragment the HARD drive.

• Satellite A300 - cannot logon Windows after you run anti-virus software

  Hello

  I need URGENT help with my A300.
  I have AVG as my anti virus. I ran some scans earlier, and showed a number of threats that heals the VA and clean infections.

  Then, I thought to run it again just to make sure - then 2nd scan. I left do this while I went about my normal activities.
  Some time later, I went back to it. He had put into hibernation. I went from the power button and then loaded up as usual.

  FYI, I have a user account that gives full administrator rights must be able to access as usual.
  After clicking on it, it starts to load for subject a second and then straight away, says saving settings, end the session.

  It continues to be. I tried to log on in safe MODE. The same thing happens. It will not go beyond this point.

  Help, please!

  Memory/University thesis, I have my sister here! I don't know when it was backed up last! :(

  Thank you

  Hi cheekymonkey1882,
  seems that your system is infected with a root kit...

  get a linux live cd or a victory on cd and save important files!
  You must not start from the cd, so no code hard drive will be loaded!

  After saving the files (make sure that you can read!, usb device or other)
  restore the system to factory settings...

  You can try to disinfect the hard drive with the live cd too...
  but remember: If a file is infected it will remove the scanner.

  Good luck!

• Re: Satellite A200 LEFP6 is slow after updating the BIOS

  Hello

  I have a problem with my Toshiba.

  2 days ago, I installed a new driver BIOS on the computer. Since then, a laptop computer is running much more slow then normal. I don't know what to do?
  I want to get the previous Bios driver but I don't know how to do it and I don't wont to do the biggest problem that I have now.

  I chose good driver for my 'machine', Vista 32-bit (http://support.toshiba-tro.de/tools/eula/info_eng2.asp).
  Can you help me???

  I also have one more problem. My cd/dvd drive does not read the cd drive.
  Is it possible that the problem is Vista? Because a few months ago, I had a similar problem with cd/dvd player. This day someone we the internet forum advice change me something in (I'm not sure) a registry file.

  It is a good solution because the disappearance of the problem and everything was working properly until this month.

  Thanks for any help,
  So I hope you understand my English :)
  Nice day
  Tomek

  Hello

  Currently, the European driver Toshiba page provides a Vista 32 bit version of BIOS 2.50.
  Don't forget that your BIOS has been updated to 2.50. You can check in the BIOS settings.

  In addition, I also recommend setting the default BIOS.
  This can be done in the BIOS itself.

  But generally it s not easy t say why your laptop is slower. To be honest I don t understand what you mean by running a lot more slow then normal
  The laptop starts more slowly? Or what's a problem exactly?

  So now a few tips about you, CD/DVD drives issue;
  Yes, sometimes the windows sets some filter values in the registry and this may affect the functionality of CD/DVD drive.

  Check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=37430&TSTART=0

  There you can find the solution.
  And here is the link to the useful program that removes these registry values
  [CD / DVD missing in "My computer" (Windows Explorer) Player: http://askiris.toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=4457 82xml]

  Welcome them

• Satellite L450D respond does not after installing the camera software

  Hello

  I bought this month a return of the United Kingdom L450D. Yesterday I tried to install the Olympus digital camera software, but once installed would not work. Olympus site application is compatible with Windows 7, but I decided to uninstall the software. I wonder if I uninstalled something I shouldn't, because does not now.

  I have a message - Windows Explorer has stopped working with 2 options: find a solution online and restart the program or restart the program

  Problem is cursor will respond not with the touchpad. A couple of times without reply, tried FN + F9. Mouse connected, cursor moves but will not meet the comand

  Any ideas?

  Hello

  This means that camera Olympus software is causing this problem?

  Hmm you have tried to uninstall the software in safe mode? Go to the advanced boot menu (F8), select Safe mode. Then try to uninstall the usual Olympus software.

  In addition, you can try uninstalling with special tools like CCleaner. I use it often as it cleans the registry and others.
  Check it!