Send notifications by e-mail from the IOM outside
HelloI have a code which I'm out of IOM. The code does the following things:
1. updates the expiration date of the user of the base of the end date indicated as input.
2 send email notification after the end date of the user is updated.
I can run point 1 with success-making key, user key Manager, update the end date of the user in the table of the usr, but I am facing issues when the notice is sent by e-mail to the user's Manager. If anyone has worked on this type of scenario, so please let me know.
Thank you
Kalpana.
File send text as an attachment to the email.
Tags: Fusion Middleware
Similar Questions
-
How to set up a mail with the IOM Server
Experts,
Any idea/links/Docs on how to configure a server to e-mail with the IOM and to send e-mail notifications to someone.
Forgive me if my questions seem incomplete.
Thank you
Suren. Create a resource of Type e-mail server. Give name as "Email Server.Now fill in the values for the all parameter for example server, user name, password and authentication type.»
. Go to the System Configuration and the Email Server property value gives the name of the resource that you created in step 1, so the name will be "mail server".http://forums.Oracle.com/forums/MessageView.jspa?MessageID=3867506&STQC=true
-
This e-mail from the thunderbird support team or a fake email?
I received an email informing me that my account is almost full and giving me instructions on how to renew my account. I just want to check if this e-mail is really a mozilla thunderbird support or is a fake email.
the content of the email:
Subject: [[email protected]] alert low storage limit
Date: Thu, October 15, 2015 17:00:08-0700
From: < [email protected] > Service account
Answer: [email protected]
To: [email protected]Dear [email protected],
1969-2000 MB
We noticed that your e-mail account has almost exceeds its limit. And you will not be able to send or receive messages any time now,
Click here to renew your account.
NOTICE:
failure of the renewal of your e-mail account. It will be permanently disabled.Thank you
Service accountn ' has not clicked on the hyper suggested link again.
The wording of the messages from the 'provider' is a little off. It may be a phishing attempt.
Contact your e-mail provider using the details found on an old Bill or use a previous contact address you have used successfully in the past.
DO NOT CLICK ON LINKS IN THE MESSAGE-UNSUB
The messages appear to come from - [email protected] , but the reply address is another area - [email protected].
The address of this last was reported as scam
http://scammed.by/scam.php?id=77518
Your questionThis e-mail from the thunderbird support team or a fake email?
Thunderbird support is not a provider of e-mail and does not send a message like this. I suspect that it is a scam.
TB - 38, 3 Win10-PC
-
The problem with the file sharing by mail from the contextual menu in the Finder.
When I want to send a file by email from the Finder, I do a right-click on the file and choose 'Sharing'-> 'Mail '. I expect to see the new e-mail message with the attached to the message of failure.
But nothing happens and the Finder stop responding and I have to "Force quit" them.
My configuration:
MacBook Pro (retina, 13 inches, end of 2012), 2.5 GHz Intel Core i5, 8 GB 1600 MHz DDR3, HD 4000 1536 MB, version OS X El Capitan 10.11.3 graphics card
Please launch the Console application in one of the following ways:
☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).
☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be all Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ all Messages
in the list of logs on the left. If you don't see this list, select
List of newspapers seen ▹ display
in the menu at the top of the screen bar.
Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.
The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.
Please don't dump blindly thousands of lines in the journal in this discussion.
Please do not post screenshots of log messages - text poster.
Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.
When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.
If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.
-
Why is there no option to send notifications by e-mail on external calls task?
Whenever Eloqua creates a certain type of task, I need the external call to send an e-mail notification to the rep. Why external calls task do NOT have the option of e-mail notification checkbox? See screenshot below. Is there a way to force or to obtain this added option for task calls? Any thoughts, Topliners? Thanks in advance!
Update on this post: I called support Eloqua and currently, they do not have the functionality to send notifications by e-mail for Eloqua 9 integrated tasks. There is no way to get this custom built/added either. I then spoke with my SFDC administrator to see if there was a way to have SFDC auto brand e-mail notification area once a task with a certain subject line has been crossed to SFDC. He did some research and it seems that if Eloqua does not have a certain feature, SFDC won't it no more. So there is currently no way to get tasks marked notifications to auto-email.
-
How to move all e-mails from the imap server to local folders automatically for each mail?
Hello
I want to transfer all my e-mails in local folders as soon as they arrive in Thunderbird and remove them from the server. I can do this manually by moving the mails to hand, but I want to do it automatically by Thunderbird.
After a few hours, I found there is an option on the removal of e-mails from the mail server, if I use POP3, but it is not an option for IMAP.
Important note: my mail can not be resolved like POP3, so please don't segguest implementation using POP3.
Thanks in advance.
-
Flatten to a string to send arbitrary objects by messages from the user interface?
Hi people,
I am trying to send arbitrary data by messages from the user interface defined by the user to my labview interface. Something funny happens then: if I send the data through the message of ui, it seems I have something strange. There is only one character or nothing in the message of the user interface that reached my reminder.
It seems that flatten channel also creates control characters that are interpreted by NI TestStand and Labview not as members of the chain, and for this reason I only get incomplete data. within the action of testand, which creates the flattened data, I put a dialog box to display the string data, and it seems that at least up to 255 (ascii) characters are used.
Is there something like uuencode/uudecode to avoid this problem?
Thanks in advance
Okidoki, found.
His «binary"produced by «Flatten the string» string Apparently I thought, the LabVIEW data type is incompatible with the API of TestStand from LabVIEW. In conclusion I would classify this as a bug (sorry people, at least there should be documentation) API for LabVIEW TestStand 2014.
As a solution, I use flatten it in XML, which is a printable and human readable 'normal' string.
It was trial and error, and I'm not enjoying this.
-
I want to send my message by mail with the email form that I have already installed
I want to send my message by mail with the email form that I have already installed
original title:<> Hi Michael,
I suggest you to check if you get the same message in Internet explore, if you use Firefox I suggest you contact Firefox for using the link below.Hope this information helps. -
UID copy failed
I have windows vista. When I try to delete the mail from the Inbox I get the message that says: "the selected message could not be copied to the destination, UID copy failed."
Hello
· What mail client do you use?
If you use Microsoft Outlook, please post your questions in the Forums of Microsoft Office.
If you use Windows Live mail, please post your questions in the Windows Live Forum.
-
email problem - "mail from the host cannot be found.
Problem title: original email.
Why I have problems with my email migration to Windows Mail? I get an error message stating my "mail from the host cannot be found. This has happened on and off for the last 2 weeks. It also affects my laptop. He does not seem to fix his car, then back again. Have you any idea what may be causing this.
The host (server) mail.btinternet.com is alive and well. It must have been a temporary problem. Let us know if this problem persists.Gary van, Microsoft MVP (Mail)------------------------------------------------------"Gerry Pike" wrote in the new message: * e-mail address is removed from the privacy... *My e-mails light up Windows Internet Explorer. When I open Windows Mail, automatically migrate through and be able to be opened, read and responded to. I did this since I've been using Vista - about 2 years and more. It is strange that he should start suddenly that past not only with my PC, but also my laptop. I did not any changes to settings to one of my computers. The situation does not erase, but he continues to reappear - as the last 2 days! Even my ISP - BT - could not find a solution! The message I get is a follows.The host 'mail.btinternet.com' is not found. Please check that you have entered the server name correctly.Account: 'mail.btinternet.com', server: 'mail.btinternet.com', Protocol: POP3, Port: 110, secure (SSL): no, Socket error: 11001, error number: 0x800CCC0Dppear.Gary van, Microsoft MVP (Mail)
-
I lost my mail from the homepage app.
I lost my mail from the homepage app. Where it will be to reinstall?
First of all, try to search for it...
Select search in the bar of charms and search for mail. If its there, it will appear and them select it by right click and choose PIN to start.If it does not, go to the app store and search (Win + Q) for mail, you can reinstall it from there
-
How to remove the user from the IOM by using Trusted Recon
We trust Sun to IOM LDAP Recon. We delete usually old Sun LDAP users periodically. According to the requirement, these users should also be eliminated from IOM as well as all its databases that are put into service.
Looks like that, the behavior by default of 'iPlanet Trusted remove user Recon Task' is to set the user status to 'Deleted' and 'Revoked' about the users corresponding IOM and resources put into service. How can I remove users from the IOM as well as the database placed in service in the case of user removed from Sun's LDAP?
Thank you!
KabiOnce a user is created in the IOM, you cannot remove it. As you said, the default behavior for the removal of the recon user approved is that the user will be disabled in IOM and revoked from all target applications. Revoke the user will remove the user from the target applications.
This is done for the purpose of audit so that later we can determine which users have been removed or terminated.
But as a you can manually delete the records of user database directly which is not recommended.
-
This error message appears when I try to send to "my pictures", a website or anywhere outside my windows mail or yahoo mail
The connection to the server has failed. Subject ' Emailing: 280front', account: 'yahoo mail', server: 'www.smtp.plus.yahoo.com', Protocol: SMTP, Port: 465, secure (SSL): Yes, Socket error: 10051, error number: 0x800CCC0E
When you click a mailto: link on a Web site (like on Craigslist, etc.), itwill try toOpen your default e-mail program.If you use webmail, this can be a problem, because most webmail can be defined asthe default e-mail program.Yahoo made a toolbar which apparently can make your Yahoo webmail theby default...SeeIf you are using Internet Explorer and you don't mind the other garbage thatis installed.If you want to use a program such as Windows Mail or Windows Live Mail desktopto access your Yahoo Plus account (you can access the free account in the)US), you must correctly configure this program of e-mail by the link providedpreviously.Note: The server name does not begin with 'www '.--Dave N.MS - MVP (Mail)Windows 7 Ultimate 64Get it: http://download.live.com/wlmail"ihave010" wrote in messageNews: * e-mail address is removed from the privacy... *I'm so frustrated. Why I can not email a website or my photos orMy documents? I now have an acct direct windows and a hotmail. Do I need oneWindows mail, windows live or hotmail ACCT? Can't I just use my Yahoo?The connection to the server has failed. Subject ' Emailing: 280front',.Account: 'yahoo mail', server: 'www.smtp.plus.yahoo.com', Protocol: SMTP,.Port: 465, secure (SSL): Yes, Socket error: 10051, error number: 0x800CCC0EWindows 7 Ultimate 64
-
Sending mail from the script.
Hello
I am writing the script that will send the mail & check the ORA error in the alert log. Below is the script, but I didn't receive the e-mail, please correct.
# File: alert_monitor.sh
key = 'date + % Y.%m.%d ".
ALERT_LOG_PATH = $1
#Check to find any ORA errors
Cat $ALERT_LOG_PATH/alert_$ 2.log | grep "ORA" - | grep - v ' ORA-12570'. "
#If there is error ORA post them
If [$?-eq 0]
then
CNT ='cat $ALERT_LOG_PATH/alert_$ 2.log | grep - v ' ORA-12570' | grep n 'ORA' - | cut - f1 d «:» | head - 1 '
SED-n '$cnt', '$p' $ALERT_LOG_PATH/alert_$ 2.log | mail-s 'Mistakes in the $2 alerts log' [email protected] [email protected] - c
FI
#Archive this alert drop by a date key
Cat $ALERT_LOG_PATH/alert_$ 2.log > > $ALERT_LOG_PATH/alert_$2.log.$key
CP/dev/null $ALERT_LOG_PATH/alert_$ 2.log
Thank you.
Published by: user8854256 on November 18, 2010 23:54Maybe your mail order doesn't like that you first specify the address and follow that by - c. cc-address? This help if you change that?
... | mail -s "Errors in alert log of $2 " -c [email protected] [email protected]
Apart from that, I think you run the risk of ruining your line number for sed with the running grep.
-
When I click on mail from the OL, it now opens with a message window?
My outlook mail is a mess. My mail files and local files separate all the time. My local folders will list separately on the left of the page with a background color kahki? Page mail slides, has never done this before? When I opened the mail, it opens to a page of message send/REC/WAV? It allows to open the lower pane only when you click on? Also, I tried offline compaction, it stops in the Middle, and whatever the folder is currently compacted disappears. I have does three times with no result... no go to compact again, I'm going to lose my files. It's a mess, even though I keep getting mail?
You may have a damaged identity especially if it's the default main identity. File | Identities | Add the new identity. Create a new one and try it. If all goes well, you can import your messages and address book from the old identity and delete it.
Maybe you are looking for
-
create usb bootable drive Humber 7installation victory
Hello, I'm trying to create a bootable USB key for my Windows 7 installation disc. (1) can I create an iso of the original disc and copy to USB? So can I copy just version 64 bit home premium on the disk, because it is only a key USB 4 GB (3.72 GB us
-
Can I download windows 2008 server R2 64 bit Bill through the Internet.
I bought the copy at retail of windows server 2008 R2 64-bit x. and I send out countries but Server 2008 Media Server is here in India. I want to install this product on this server what can I do. ? can I download the support from the operating syste
-
How to read the Drwtsn32.log and user.dmp files
I'll have the blues of the blue screen and need to read these files to help me find the problem.
-
Delete a printer or add a new One
After you set up an e-mail address for my printer, I returned the printer and bought another. I want to use the same address of the printer for the new printer. Can I do if I have any more old printer? Thanks, cb
-
Firewall blocks access to AOL Error 0 x 84008504.
OT: firewall. Firewall blocks access to AOL. Error 0 x 84008504. Help!