Send the expense reports to department heads every fortnight?

Similar Questions

• Approval of the accounts payable pending in the expense report

  Hi all

  I'm having a problem where the two incidents that have status "pending approval of accounts payable" in EBS are reported on an expense report. Are there any ideas as to why this is happening?

  Thank you!

  Hello

  It seems that the auditor has not marked received receipts.

  -connection with the auditor of the user accounts and access to the responsibility of the audit.

  -Go in the "management report" Menu just to verify that the auditor is not assigned to the expense report.

  -Change the Menu, go to the Menu 'reception reception package '.

  -Query the status of expenditure and fill the fields: Original Date received packet received and the report number and save it.

  Cheryl

• Malicious Software Removal Tool repeatedly offered on Windows update. Manual update of the malicious software removal tool Windows sends the file to a different folder every time I install and is inaccessible

  Original title: manual update of Windows malicious software removal tool sends file in a different folder every time I install and is inaccessible

  I installed MRT repeatedly automatically and it keeps asking me to install.  I did it manually and it would be installed in a different folder on my other drive to a different location each time.  Here are two of them only starting today.                e:\be6123f9a9f687a86b13dca0939d0bc and e:\7321902026cdc0af0d9d93be

  Hello

  The following article can help you to solve this problem.
  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
  http://support.Microsoft.com/kb/910339

• User authentication - can not send the session... cookie header etc.

  I am quite new to create dynamic sites, especially using php.  After following many tutorials but I was able to connect to a database using Xampp and phpMyadmin with everthing works as it should.  I have created a template and can still access the database, view information presented in different ways without problem until I try to connect the user.  As soon as I do, I get the following error:

  Warning: session_start() [Function.session - start]: Cannot send session cookie - headers already sent in C:\Program Files\xampp\htdocs\FM...ry\TestLogin.php on line 0
  
  Warning: session_start() [Function.session - start]: Cannot send session cache limiter - already sent headers (production started at C:\Program Files\xampp\htdocs\FM...ry\TestLogin.php:0) in C:\Program Files\xampp\htdocs\FMRPNewTry\TestLogin.php on line 0

  I don't know what to do. The inside of the frame a login page appears very frank and I got it actually working while taking a tutorial.  I can't imagine what I did differently in my own page/site other than one using a model which is pretty basic.

  Can anyone help?

  The difference is caused by selecting the option to use links relative to the root of the site in the site definition. With a PHP site, you should always use links from the document. Otherwise, you must change all instances of virtual(), which is an exclusive feature of Apache, and that also causes a lot of problems, such as the one you fell.

• Uninstalled McAfee Security, but I continue to the popup error report 'McAfee Security Center had to close"asking if I want to send an error report.

  Original title: error reports

  I uninstalled McAfee Security, but now I get the popup error report 'McAfee Security Center had to close"asking if I want to send an error report. When I click on 'do not send', another error report immediately appears. No idea how can I stop this? At the present time, I have 9 popups error report in my taskbar.

  Ed

  Hello

  This problem can be caused if McAfee Security is not completely uninstalled.

  1. Why did you uninstall McAfee Security?

  2 have you tried sending the error report?

  3. What are the content of the popup of 9 error report?

  I suggest you to uninstall McAfee completely the link security.

  How to uninstall or reinstall supported McAfee products using the tool of Consumer Products Removal (Development):

  http://service.McAfee.com/FAQDocument.aspx?ID=TS101331

  If the problem persists, then I suggest you to contact McAfee support:

  http://www.McAfee.com/us/support.aspx

  If you need further assistance on this topic, let know us and we will be happy to help you.

• Invert the status of expense report

  Hi all,

  Nice day.

  There is an employee (EMPLOYEE X) who created an expense report, registered and then to go on an extended leave.

  Now, they need the expense report to be transmitted and processed.

  I suggested that we open EMPLOYEE x account, give someone authority to submit via 'Access permissions'.

  but business users do not want to reset account EMPLOYEE x.

  any other suggestions?

  can I directly update a column to force him to return to the State of project?

  Thank you!

  Nope. It's the best way to go.

  Or you can make the payment in AP as payment for this employee and later pay this deposit when they are imported from expense to the AP.

• Firefox crashes on startup - going straight to the Crash Reporter

  Firefox started crashing on startup today ' hui - goes directly to the Crash Reporter. Does not correctly send the accident report. Firefox in safe mode does not help. Tried to uninstall followed by clean install, no change. Tried to clean the installation of an earlier version 41, 0 - no change.

  Just before what happened got an opinion on Norton Toolbar, and I chose not to activate it.

  Have also tried to turn Norton turned off before reinstalling - no change. Also said Norton to ignore xul.dll, which sometimes he puts in quarantine during updates (detection of false suspects cloud 9).

  The later saved report of June so probably isn't relevant. Here's what the Crash report attempts to send:

  AvailablePageFile: 3647537152
  AvailablePhysicalMemory: 916017152
  AvailableVirtualMemory: 2042167296
  BlockedDllList:
  BlocklistInitFailed: 1
  BreakpadReserveAddress: 268566528
  BreakpadReserveSize: 67108864
  BuildID: 20150917150946
  CrashTime: 1443810798
  E-mail: [email protected]
  InstallTime: 1442945265
  ProductID: {ec8030f7-c20a-464f-9b0e-13a3a9e97384}
  ProductName: Firefox
  ReleaseChannel: press release
  Safe mode: 0
  SecondsSinceLastCrash: 472
  StartupTime: 1443810797
  SystemMemoryUsePercentage: 57
  Ramjet: 1
  TotalPageFile: 5206085632
  TotalPhysicalMemory: 2146148352
  TotalVirtualMemory: 2147352576
  URL:
  User32BeforeBlocklist: 1
  Seller: Mozilla
  Version: 41.0

  This report also contains technical information about the State of the application when it crashed.

  Hmm, Yes, incident reports are old now.

  As long as I can guess, I note something that is coming a lot lately: If you use Norton Security software, it seems to be a serious boot problem crash if you also have a program called Freecorder from Applian Technologies. If you find Freecorder in your Start menu > all programs or in your control panel, uninstall a program, and it is not crucial to keep it, please try to delete it. You have to maybe stop and restart Windows to make sure that it is completely disabled.

• Send the command to laser sensor via a serial port RS232

  Hello

  I have a sensor of moving Laser of OPTEX FA Co., LTD. with a Communication Manual.pdf file attached. I modified the sample base series write and Read.vi of LV to send the command to the probe in order to receive a response. However, LV always returns an error on my VISA Write.

  In short, the structure of command for the sensor must have a form like this

  STX-command command-space-1 2 - ETX

  (more can be see the manual on page 3 or 18 of the .pdf file)

  where

  -STX: code showing the head of transmit data (02 H)

  -Command 1, 2: could be refers to table 1, 2 and 3 of the manual.

  -ETX: code illustrating the completion of data transmission (03H)

  For example, if I want to ask the sensor to send the data from A sensor head, the command must be

  STX-ABLE () A - ETX

  (20H) space is shown as ().

  I tried to send a string HEX (02 - 4 d 454153555245-20-41-03) for this command to the entry VISA, but all I get is ERROR.

  I enclose with this thread my vi and a printscreen of the ERROR.

  A lot a lot of appreciation for any help from any of you.

  I have my LV code can run successfully. He can read the COMMAND and return measurement data. The last time does not playback VISA because I used a cable RS232 to opportunity, and someone operated two pins (2 and 3) for another application.

• Even after the status report of the auditor approval i - the load is "pending approval of accounts payable"

  Even after the status report of the auditor approval i - the load is "pending approval of accounts payable"

  (1) what to do now? I intend to update it

  UPDATE ap_expense_report_headers_all

  SET expense_status_code = "INVOICED."

  expense_current_approver_id = NULL,

  source = 'Self-service '.

  (2) why these things happen? What is recommended to treat if it happens?

  Thank you

  Rahul

  Hello Rahul,

  Expense report preparer can remove the expense report and re - submit, it may be the case of data corruption which is the reason why its status is not updated.

  Re submitting the ER to do magic

• Request for prepayment on the expenditure reports

  Hello
  
  In the Payable settings options.
  If you use fresh Internet and you enable this option, then payables invoice import applies all advances outstanding, available, starting with the oldest, up to the amount of the expense Internet.
  
  Suppose that -
  The 'Advance' checkbox is not checked or is forgotten to check in the workbench of expense for an expense of employee in the AP report, approving the report of the expenditure and there is an advance for this employee will be payables invoice import still applies this advance against the expense report?
  
  Thanks in advance
  Shanks

  The expense report import process will not apply the prepayment in this case. However, you could always apply the prepayment once the invoice is created in the AP

• How to send the page before loading the page header?

  Hello
  
  Is it possible to send the page before loading the page header. Because I have a sql report in the homepage itself that needs to be exported to excel.when, loading the page, the page elements will be set to NULL in the session that causes the output export empty.
  
  Appreciate the help,
  IDEOGRAM

  Hello

  Use according to the calculations of the header for these items.
  It should work

  BR, Jari

• Get the error message "send and receive reported an error (0x800CCC92): your e-mail server rejected your login. '. Check your username and password in your account properties.

  Get the error message "send and receive reported an error (0x800CCC92): your e-mail server rejected your login. '.  Check your username and password in your account properties.
  I'm using Outlook 2002 on the XP Pro operating system.

  It lasts for almost a year, but I managed to work around the issue since it was started using a different outgoing SMTP user name and the password.  (More settings, outgoing server tab, log in using...)  Now it has stopped working.

  There are four machines at this place and all suffer from the same problem.  I use a LinkSys RVS4000 router.  The previous Linksys router has also had the same problem so I replaced, thinking he can correct the problem, he didn't.
  Troubleshooting:
  a. I am able to recreate the account on another machine to a different place and it works.
  b. I can take an account of my machine, create in this place and it will not work.
  c. accounts deleted and created a new, did not
  d. has replaced the router to the place with a new Linksys router
  e. contacted support for ISP, (Time Warner), they accuse the hosting company
  d. contacted support for hosting of the company (HostCentric) they blame the ISP
  c. confirmed username and passwords are correct.
  e. There are 4 machines in this place with different addresses.  All started having this problem/error the same day within hours
  f. may receive emails cannot be sent.

  http://expwinproblems.blogspot.com/2010/11/error-messages-in-Outlook-when-send-or.html

• Send the microsoft error report. When can I expect an answer and someone has encountered this

  im running a configuration tool LONSpec which continues to encounter a problem and sent to close.i must microsoft error report.when can I expect an answer and someone has encountered this

  You do not get a response.  The "error report" simply sends the incident information to a database.  People do not read the actual reports (they just look statistically to see if any given program regularly generates accidents), especially if this isn't a Microsoft product that caused the accident.  It is best to contact the manufacturer of the other software or check their Web site.

  Steve

• Impossible to get moviemaker to work on my computer. always get the error message, asking if I want to send an error report. __

  trying to open movie maker I get the winbdow which says "windows movie maker has encountered a problem and needs to close" and then askss to send an error report. Downloaded the program again, but keep getting the same message

  Hi jovato,

  Remember to make changes to the computer before that happened?

  I suggest you try the following steps to refine the question:

  Step 1: Put the computer to clean and test start

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  If the problem persists,

  Step 2: Download and install the latest service pack on the computer

  
  How to obtain the latest Windows Vista service pack

  http://support.Microsoft.com/default.aspx/KB/935791

   

   

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have two report in a page and I want to change the report that one color of header but he perform the two report

  I have two report in a page as A report and B and I want to change the header color report only a header, but it will change the color of the header of the report I use this code in the css section

  table.uReport > thead > tr > th {}

  color: red! important;

  }

  but it will be the effect on the two report kindly can you help me

  Mr.javvi wrote:

  I have two report in a page as A report and B and I want to change the header color report only a header, but it will change the color of the header of the report I use this code in the css section

  {table.uReport > thead > tr > th}

  color: red! important;

  }

  but it will be the effect on the two report kindly can you help me

  Specify a static region ID for each region and which applies to the to box in your rule of CSS selector to target the report only in this region:

  #report-A table.uReport>thead>tr>th {
    color :red !important;
  }