Sending e-mail based on the value selected in the select list

Similar Questions

• Fetch value selection list to select the list using dynamic measurements

  Hello
  
  I have a select list 1 and select list 2
  
  as I chooses a 1 based on selected value select list option, select list 2 options screens.
  
  
  : Options P1_SELECT1
  
  DISPLAY RETURN VALUE OF VALUE
  D INTERIOR
  INTERNATIONAL I HAVE
  
  : P1_SELECT2 with dynamic statement options
  
  Select NAME, ID from PRODUCT_MAS
  where ADDL_FIELD1 =: P1_SELECT1
  
  can I do this task using dynamic measurements?
  If so how can I do this?

  You have even set a dynamic Action for this:
  Set as Select list and property 'Cascading LOV Parent article (s)' set of P2_SELECT2 to P1_SELECT1 and you're done.

• I can not send e-mails through with the ip address that I have now, it's an address.now of earthlink I have more earthlink, I need to change so it will send to someone, please help.

  I can't send all e-mail messages through the ip address that I have now, which is earthlink.  I need to change so that I am able to send messages to anyone.  I have windows xp - outlook express.

  If you no longer have the earthlink address, then you need to get a new email address before establishing an account.  You cannot configure an e-mail account by using an IP address.  Your internet provider or someone else must provide a first e-mail account.

  In OE, you can then go to tools | Accounts | Add | By post, then add your new email account in OE, so it can get messages.

  Steve

• How can I send a mail stored in the drafts folder?

  I prepared an e-mail, stored in the drafts folder, and now want to send.  What should I do?

  Double-click the header of the message and it will reopen as a new message. Click on send.

• How to set a repeating subform based on a value selected in a drop down list?

  Please forgive me if this is somewhere, but I spent a few hours searching and have not led to what.

  I have a drop-down list that allows the user to select the number of teams in you listing (1-5). Then I have a subform with all the necessary information for each team. I wish that the subform to repeat automatically based on the number selected in the drop-down list, because I need this information for each of the two teams by registering.

  Thank you!

  In the case of exit of the drop-down list, in formcalc, put something like:

  teams of var = $.rawValue

  var counter = 1

  While (counter< teams)="">

  Subform2.instanceManager.addInstance)

  Counter = counter + 1

  endwhile

  This assumes you have already 1 version of the subform. If you are a beginner with no condition (meter while doing<=>

• The point in THE READING values (select lists)

  Hello experts and professionals!
  I have a little problem on the left in one of my apps which is otherwise quite finished. By using the code below, I have reset some items on my pages, including lists of selection.
  Which works fine in Firefox does not in IE 8 in all. The text element is disabled, but the selection lists are not emptied.
  
  Do you have any idea how to fix this bug? I had serious problems to make jQuery and Javascript to run on IE and had to paste my code in the body of the page for ie to correctly interpret. This time it didn't matter either. Do you have any suggestions for me? Do I need to adjust the code? Since the text element is set to nothing, I know that the code is done! It is simply the selection list, which isn't managed properly!
  
  I'm curious to know your tips!
  
  Thank you very much!
  
  Code:
  
  < script type = "text/javascript" >
  function f_setItem)
  {
  $x_Value ('P1100_ART_NAME', ");
  $x_Value ('P1100_ART_CODE', ");
  $x_Value ('P1100_ART_ID', ");
  $x_Value ('P1100_XVAL', ");
  }
  < /script >
  
  Kind regards
  Sebastian

  Hello

  If all the elements are select list try this

  BR, Jari

• How to send an e mail based on a value?

  Hello world

  I'm really new in the system APEX and coding, so I need more help then, it seems.

  I want to do is send an email to someone a month before a specific date in a column.

  What I thought to be done is to create a new column with the value: sysdate - Date_in_the_column.

  Now, what I don t know how how to check this box to send an email when my new column value is = 30. Create a task or a process (I need to infallibly to check this value right, to know when to send the email)? If yes how can I do this?

  Thanks in advance

  Hi Gui Rocha-Oracle,

  GUI Oracle Rocha says:

  Hello world

  I'm really new in the system APEX and coding, so I need more help then, it seems.

  I want to do is send an email to someone a month before a specific date in a column.

  What I thought to be done is to create a new column with the value: sysdate - Date_in_the_column.

  Now, what I don t know how how to check this box to send an email when my new column value is = 30. Create a task or a process (I need to infallibly to check this value right, to know when to send the email)? If yes how can I do this?

  Thanks in advance

  1. you create the procedure which includes the logic that checks the date.

  2. then, you must create a job to perform your procedure.

  Check out this old thread: time based on event

  and also check this Doc online: APEX_MAIL

  Hope this helps you,

  Kind regards

  Jitendra

• BlackBerry Smartphones can send E-mails or change the default Services

  Hello

  I have 2 email addresses on my BB Storm, a Comcast account and a job.  I have no problems when I try to answer an e-mail from work.  However, when I try to respond to an email from Comcast, I do not get an option "send", just "Save as draft" or many other options.  I read another thread who suggested I go into Options > Advanced Options > default Services.  When I'm here, these three areas, calendar (CICAL), list (SYNC) contacts and messaging (CMIME) are all set to "Desktop" when I try to pull it down, a black box appears on the word "desktop" and there seems to be no more options pull down.  Any suggestions?

  Hello! I'll jump in...

  When you reply to an email from Comcast, your default value (of office) does not apply, since you're replying to Comcast. The default applies when you create a new piece of e-mail as the originator - it will default to send your default setting, you can override, by using the 'send' at the top of the screen, when you create the message).

  But, since your Comcast seems to be mucked up somehow, you must (as also recommended), re - send service directories to try to get it straightened out. For me, the best way to send the books is to use your Web of BIS carrier site... If you do not know the URL, find it with this link:

  http://www.BlackBerryFAQ.com/index.php/Where_can_I_log_into_my_BIS_account%3F

  If you have not used before, you will need to associate the Web site interface to your storm - and IMO that is more easily done on the storm... Settings > e-mail settings, create a username and a password (NOT a @BB e-mail account), then use these credentials to the site via a PC.

  Once you're set up with the BIS Web site, you can manage all BIS configurations you have - and you will find a configuration option is to send the service directories.  What you will find also, is that to manage your BIS accounts via the site or the storm interface has the same result - if you change something in a single interface, it will reflect in the other... they actually control the same, simply via a different interface.

• Today my email yahoo via thunderbird refuses to send e-mails due to the security exception box saying yahoo security certificate has expired. What should I do?

  It is incidents # 140604-031419. As of this morning I could not send emails to yahoo in Thunderbird. Instead a box of security exception appears, saying: "you are about to replace how Thunderbird identifies this site. Legitimate banks, shops and other sites public would ask you not to do. This site tries to identify with the invalid information. Outdated information. Certificate is not currently in force. It is impossible to check whether this identity has been reported lost or stolen.

  After clicking on 'Show', I realized the so-called security smtp.mail.yahoo.com certificate had expired today, 4 June 2014. Is it possible yahoo forgot to renew the certificate (obviously really happened in 2008)?

  How can I start sending emails through this account again without compromising safety?

  Yahoo has screwed up. It's for you to decide if she is sure to make an exception and send the message anyway or wait until they fix the cert.

  You can use webmail to work around the problem, however.

  Not that it makes feel you better, but you're not alone.
  https://answers.Yahoo.com/question/index?QID=20140604112909AAwFdLO

• When sending electronic mail it modifies the script or send pictures

  When I use before or answer all e-mail is changed. script lowercase changes. Photos or engravings are not sent. People who receive my E Mails are unable to download or try to see all of the e-mail

  Firefox send an e-mail, it's strictly a web browser.

  If you use Firefox to access your e-mail, you use "webmail". You must seek assistance from your service provider or a forum for this service.

  If your problem is with Mozilla Thunderbird, check out this forum for support.
  http://www.mozillamessaging.com/en-us/support/
  
  or this one
  
  http://forums.mozillazine.org/viewforum.php?f=39

• cannot send e-mail because of the use of the mailbox

  MSG on my cell following use of mailbox 228,47 KB of mailbox space used 475 KB you won't be able to send an email.   What is the remedy to fix this problem

  This message refers to the mailbox of your ISP.
   
   
  Menu button. Options | Email accounts | This email account | Properties | Advanced. Uncheck: Leave a copy of messages on the server.
   
  Do a manual send/receive and if is not clear it, Login Webmail site your server and empty the mail files there.
   
   

• Windows 7 Live Mail problem w / "Attach a file" / "Send to mail recipient of the message": go to Firefox Mozzilla vs Windows Live Mail email e-mail

  Salvation and tks for your services, as it has been a LONG search by the 84 yo non-tek's problem solved!

  For apprx 1 month when I passed ATT.net as my Internet Server w/ATT email Mozzila Firefox main mail server, Time Warner became my service Iternet allowing me to continue w/Gtek.biz in mail server.

  PROBLEM: Each Document of widows, I chose - via "Attach a file" - more went to my Windows Live Mail/top Mail CONTAINER (new e-mail), but went to the former Att/Firefox-Thunderbird-Mozzilla new e-mail!

  FYI: I got Mozzzila Firefox - Thunderbird REMOVED from my computer. AND get this message:

  "There are no associated messaging program to perform the requested operation."

  "PLEASE INSTALL AN E-MAIL PROGRAM OR IF IT IS ALREADY INSTALLED, CREATE AN ASSOCIATION IN THE DEFAULT PROGRAM CONTROL PANEL. (FYI, I need services from my local tech PC using 'Remote Control' to do this reinstall?)  TKS for your great patience with main operatr of mind! Herb Janecek (361)232-5270 / * address email is removed from the privacy *, Corpus Christi, Texas

  Hi Betty,.

  If I understand correctly your problem solved by upgrading your system to Windows 10. Correct me if I'm wrong. If you're new to Windows 10 the links provided below will help you to better understand and help them work with Windows 10.

  Get Started with Windows 10

  Need help with Windows 10?

  Keep us.

  Kind regards

• Links e-mail and filters - the wish list items?

  Compose an e-mail containing a link does not support stable link until the message is saved or sent to the car. This limitation is known to be intentional in the documentation. However, in the good old Eudora, press a hot key while clicking on a link in an email being composed active link for the optional test right then and there. Saving time very practical.

  Filtering of incoming emails via Tools/Message filters works, but requires many unnecessary steps to create a new filter. In good old Eudora, with an open incoming email or in the preview pane, the mouse option to 'Make the filter' opens a filter window using the e-mail address to propose the filter to use or replace, options that ends with a "Create filter" button. So the first time, you get an e-mail from a friend who deserves a filter allows you to filter all future emails boyfriend as you like - while reading that first email in the mate. Tremendous work saver and eliminates the need to remember the process of creating filter separated necessary in T-Bird.

  I'm a new user, so please let me know if I missed some useful options. Also I would like to know if it is a list of wishes that would be better directed elsewhere. Thank you!

  'Dead links' are a basic 'feature' of the Thunderbird editor and is not likely to change anytime soon.

  You can right click on an email address in the message header pane and choose "create filter from. This will start the construction of a filter with 'Sender' "is" and informed selected e-mail address.

  An add-on, QuickFilters, introduced a process of construction of drag-and-drop filter.

  http://quickfilters.mozdev.org/index.html

• Updating Flash graphic report based on a multiple-selection list

  I have P13_SYMBOL multiselect list item...
  
  Set property of 'The HTML Form element attributes' P13_SYMBOL onchange = "javascript:getchart (this); »
  
  I wrote the code to the following HTML header section page.
  
  < script type = "text/javascript" >
  function getchart (filter)
  {
  get var = new htmldb_Get (null, $v ('pFlowId'), 'APPLICATION_PROCESS is GET_CHART', 0);
  Get.Add ('G_SYMBOL', filter.value);
  var ret = get.get ();
  If (ret)
  {
  var d = document.getElementById ('P13_SYMBOL');
  d.innerHTML = ret;
  }
  
  Point of Application created G_SYMBOL
  
  Created GET_CHART Application process as follows.
  
  DECLARE
  vSymbol VARCHAR2 (100);
  BEGIN
  HTP.p(:G_SYMBOL);
  EXCEPTION WHEN OTHERS THEN
  HTP.p ('no such symbol!');
  END;
  
  
  Flash motion graphic flash next.
  
  Select the label TIMESTAMP, value1, value2 HIGH OPEN, value3 LOW, null, value4 "DCF" CLOSE link "" DAILY_STOCK_QUOTE ".
  where the symbol =: G_SYMBOL
  order of TIMESTAMP
  
  When I change the symbol chart flash multiselect list does not refresh.
  No idea what is wrong with the code?
  
  Published by: user8638468 on March 3, 2010 12:39
  
  Published by: user8638468 on March 3, 2010 17:30

  Here is a link to the post to blog more detailed for those who are interested.

  http://douggault.blogspot.com/2010/03/refreshing-Flash-charts-with-AJAX.html

  Can you please mark it as "answered" if I get the credit for it! ;-)

• Value select list Withouit Refresh

  Hello
  
  I want a value in the list without refresh. I have a textfield and a list of point selection .i want when I get back from student in textfield then list of object IDs should enter in list without refresh.
  
  
  
  
  Thank you
  Maury

  Hello

  Try this
  http://Apex.Oracle.com/pls/OTN/f?p=11933:37

  BR, Jari