Sensor management

Similar Questions

• Auto sensor updates CSM 3.2 JOINT-2 for version (6.1)

  Nice day

  During the recovery of the automatic updates via CSM 3.2, true Cisco.com... not get 6.1 updates?

  The latest versions of the CSM do not yet support IPS version 6.1.

  You must stay with IPS version 6.0, if you want that your sensors managed by the MSC.

• ThinkPad Yoga 14 (20FY) - can not auto-rotation, Missing in Action Center - WIndows 10

  I just did a clean install of Windows on my Thinkpad Yoga 14 10. I tried to install all the drivers that I could. The only thing missing for the laptop, it's that I can't auto-rotation in tablet mode. Auto-rotation setting is missing from the center of the action and enter the display settings is not an option to allow auto-rotation. I also tried enabling the sensor, the sensor monitoring service and Service of sensor data with no luck. What are the conditions to get this working?

  Thank you!

  I finally got it to work. After some intense searching, I found the driver that I had to install. It ends up being the Intel integrated sensor Solution. Installation of the package has work as well as the addition of a "sensors" section in device with drivers HID sensor Manager.

  http://support.Lenovo.com/us/en/downloads/ds112057

  It's weird that the driver does not show in the ThinkPad Yoga 14 drivers page.

• Sourcefire Defense Center with the new firepower of Cisco 7115

  Hi all

  I have a client who has DC3500 with 18 Sourcefire NGIPS recorded thereon.

  This customer needs to add additional 7115 NGIPS to the existing DC3500.

  My Question is, the 7115 to DC3500 new registration will be good or not?

  Best regards, Mohamed Amin

  Course - as long as you have the licenses to apply on the new sensor. The DC 3500 (now called Firesight 3500) is rated for up to 150 sensors managed (devices) and 300,000 guests/users.

• Envy of HP Touch Smart 17: HP Mobile Data Protection sensor missing in Device Manager

  I had a HP 3D drive guard error after installing drivers of devices in Device Manager in the control panel.  I looked on Google for answers and they said to find the right driver on the HP website, sp71811, uninstall the old drivers and install a new one for this laptop.  I did this and got an error DLL missing after restarting the machine.  You told me to uninstall again and reinstall and do not forget to restart after uninstalling.  The installation said it was incomplete, that the files were not completely installed.  I got an error message about a missing .dll file (don't have the error code now).  Something about a file stack error.  I went to the Device Manager and uninstalled the driver for the HP mobile data protection thinking can I reinsall that Device Manager but he removed the accelerometer.  Now I can't download HP 3D DG due to missing accelerometer.  How can I retrieve the accelerometer and the original problem with HP DG 3D?

  Hello:

  Try the latest version of the 3D driveguard driver...

  This package provides the software HP 3D DriveGuard to the notebook models that are running a supported operating system. HP 3D DriveGuard software protects the drive hard by parking the heads if cell phone accidentally falls, or is suddenly struck by another object.

  FTP://ftp.HP.com/pub/SoftPaq/sp75501-76000/sp75979.exe

• I managed to spill water on my MacBook Pro, Apple will know if I open just to check if the sensor LCI (water) have been activated? And if they somehow, this void my warranty?

  Today, I spilled a glass of water and it went all over my MacBook Pro keyboard. The laptop is less than a month. I did everything what is recommended - I turned off and returned upside down now and just do it sit down u with ventilation and a fan just next door. If I open it in a few days to see if sensors of water have been activated, this will automatically cancel my warranty even if they are not. I read that sometimes they get activated, so I would check.

  Water + computer means generally computer died.

  Turn the power off.  Leave it unplugged.  Find your backup.

  Let the Genius Bar to determine how much damage has been done.

• How can power of fire management Center 6.0 - I Add Licenses of sensor.

  Hello friends,

  I bought licenses for the 4 sensors 'L-ASA5525-TA = "and they didn't come with any file PAK to add on the FMC.".  I contacted the Department of licensing and they tell me there is no PAK file for this product, since it is a complementary (BELIEVES) end user license agreement.  I'm confused, how do I get the licenses installed and works?

  Thanks in advance,

  Martin

  The type of license TA's IPS. TAC is correct that it does not include a separate license. It is rather a right of subscription to the IPS updates (updated rule Snort and vulnerability Database - SRU and VDB) via the Talos of Cisco's Cloud Computing service. As the right itself is not currently applied through technical means, there is no separate license associated with.

  The ASA base firepower module should have included no control license costs. If you swap that using the FMC license key, it will be show as "Protect + Control" and allow you to build protection against intrusions and related policies.

  The YOUR license allows you (by virtue of having bought it and accepted the additional EULA) for the SRU on demand or scheduled and VDB, updates to these policies use threatens the latest information available.

• Management Center of power of light 6.0 - not seeing any output sensor of firepower

  Hello people,

  I just deployed a light inline power meter and added to the CMF 6.0.  I created a simple access with intrusion prevention strategy.

  It has been in service for 3 hours and I see nothing in the management console.

  The policy plan is set up and access list see partition.

  Someone at - it a guide for the creation of a strategy of access control on the center of power of fire management, specifically 6.0 beginners?  5.4 work with another client, I...

  Thanks in advance! :)

  Martin

  Hello

  You can probably check if logging is enabled on this rule.

  Policies are more or less same 5.4 and 6.0. If traffic matches the default rule, make sure that logging is enabled it.

• Management control of the engine with proximity sensors

  I have two prox switches and two relays that I can control in labview manually, however I was unable to produce the needed code to "lock" or the relay that prox has been activated.  The application is very simple, I have a linear actuator that I run at the end of the race until it activates the switch prox "scope".  At this point, I want to activate the second relay to reverse the direction of the motor until it activates the "home" prox switch

  I know that someone will take about two seconds to bust the code but I was failing for about 2 days on this subject.  Any help would be appreciated.

  Thank you.

  Try this.  Proximity detectors and the relay outputs are simulated.  You will need to replace those with your digital inputs and digital outputs.

  In the last image, it is a small flat sequence with the button stop running to ensure that all relays are extinguished in the case where the program Stop button by wire a fake to the local variable.  Excerpts from VI transformed into nodes of property with controls to control wired in them reference.

  

• 4 "other unknown devices" in Device Manager. Windows 7 RTM 64 dv7 1450

  Just bought a computer HP dv7-1450 laptop with AMD Turion X 2 64 processors. Installed Windows 7 RTM 64 and everything seems to work except there are 4 unknown "other devices" listed in Device Manager. The 4 devices are:

  -System base unit (x 3)

  -Unknown Device (x 1)

  I have no idea what are these devices. I tried looking for drivers for chipset on the AMD and HP Web site without result. But I do not know if these are the associated chipsets. One of the devices would be the disk fall sensor hard (it does not appear in the device no matter where Manager)?

  Unfortunately on the HP site, there are not many downloads of drivers available for the 64-bit (Vista). I know that Windows 7 64 drivers won't be available until in October, but if there are not any available Vista drivers either, I expect to see all the drivers for Windows 7?

  The most important thing for me is just to know what are these "other devices" 4 and get the drivers installed.

  Thanks in advance!

  ProtectSmart Hard Drive Protection here

• Libretto W100: Access to acceleration sensors

  I would like to do shows with the G-Sensor.
  How can I access it?
  Is there any help?
  What is the driver and the name of the sensor?
  It does not appear in Device Manager.

  Hello

  It seems that the capacitive multi touch sensor is provided my Wacom.
  Google a bit and found this:
  http://www.Wacom-components.com/usingWacom/

  Welcome them

• Windows 8.1 Fingerprint Sensor Driver does not

  Hello guys,.

  After I updated for Windows 8.1 my fingerprint sensor driver no longer works!

  my laptop is Envy-Dv6 7300 ex

  I trid download last update driver for Envy-Dv6 7300 ex driver fingerprint sensor digital validity 'sp58900.exe' file, but does not!

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4132 & LC = on & CC = Aemea_middle_east & DLC = in & sw_lan...

  HP experits!  What we please? It is the urgent dinner!

  Thank you

  Abdelrahman Nabil

  Software Developer

  Happy for you missing USB driver yellow is the sensor I belive after I uninstall and reinstall easy pass HP works like Charm after the reboot!

  and it was one of the manythings that I try.

  but I guess the way to write it as follows:

  1. go to the Device Manager.

  2 - uninstall the USB not recognized yellow marke and uninstall Valideity WBF DDK to add/remove components.

  3 - Download the driver of sensor of fingerprint of CV for your labtop.

  4 reinstall HP Simple pass without uninstall it so you do not miss the credintial registered, you have sites Web and windows login.

  5 restart your knees.

  See you soon!

• Satellite Pro A300 PSAGDE Touch pad and fingerprints fingerprint sensor problem

  I have been runing Windows Vista on my Toshiba Satellite Pro A300 PSAGDE. Because my original Windows Vista key has been blocked I did a system recovery CD Toshiba vith XP. Everything work fine except the fingerprint sensor and the touchpad. Manager access suite said he couldn't connect with equipped and the driver touch pad in the taskbar icon shows but it seems to be inactive. The touchpad does not work even though I have pres FN + F9.

  What should I do to save this problem.

  Sory for my bad English, I just form Slovenia, I hope you understand.

  Somehow the material is not properly recognized.
  It will be interesting to see if the fingerprint sensor and touchpad may work with Vista preinstalled originally.
  I think that Alex is right. Contact the nearest Toshiba service provider and ask for help. They should check the functionality of the hardware.

• 5701na stream 7: Stream 7 Kionix sensors and automatic rotation

  Hello
  I have two tablets of 5701na 7 stream, that were running Windows 8.1.  I did a clean install of Windows 10 on both.  "E/s of sensor devices" section in Device Manager shows the device of the accelerometer is installed and functional.  "Sensors" section shows the 'Kionix Fusion of sensors' device, but this device is marked with an exclamation point, and indicates the status of the device that the "device could not start, error 10". "
  
  I tried the original commercial version of Windows 10 Pro N and the latest Version 1511.  I also tried the Windows 8.1 and Windows 10 drivers on HP website.  I tried various downloads of individual drivers (inf25 and inf24) and install the devices manually as legacy material.  Even when the devices appear to install correctly, 'Sensor of Fusion Kionix' device stop with error 10, usually in a few minutes.  And I tried all the combinations on the two tablets, just in case it was defective.  The two tablets were turning correctly when running Windows 8.1.
  
  Everything works as expected, including modes of Tablet and desktop computer and the Windows button that switches between the display of tasks and the office.  But in Control Panel-> display and in "all the settings-> devices-> display" settings there is no list drop-down or turn on or off for auto-rotation.
  
  I installed and re-installed the OS at least a dozen times, trying different driver combinations in different orders, but the sensor Fusion won't stay not just active.  Has anyone else had the same problem?  Windows 10 is better suited to the Tablet, and I'd be disappointed to return to Windows 8. 1.
  
  Thank you.

  Turns out be the version "n" to win 10.  The "n" version not supported the pilot of Kionix, while the "n" version is apparently not.  As far as I can make out, the "n" version does not install the required driver update framework.  The driver seems to run through all the options, but it is not actually install the driver correctly.  With a version "n" not to win 10, driver installation takes about 10 seconds, the part of driver framework seems not to be triggered and the package successfully installed / active detection devices.  If you plan to install Win 10 Pro, remember to insert EI.cfg and PID.txt files in your USB image, substitute the Win 8.1 home activation key which is burned in the BIOS.

• Windows 7 Pro x 64 does not detect HP Mobile Data Protection Sensor (accelerometer)

  Hello.

  I installed win7pro x 64 yesterday and already fallen on a serious problem, which is how I use the laptop a little dangerous for my valuable data.

  When I was working on HP Vista 32 bit (of the partition recovery etc.) brand, it was a device called the HP Mobile Data Protection with HP ProtectSmart software sensor (or protect Smart). In other words, the accelerometer HDD which parks the HARD drive heads when it "feels" it is down or something and the software for it. It has worked flawlessly.

  
  

  Until I decided to install Win7... And then, surprisingly, after failure of driver install and take a look in the Device Manager, I have noticed that there is no such device. I checked three times, looked at property of each device, even reinstalled Vista 32bits back - he has shown again - and installed Win7 - not detected again. There is nothing that has the HPQ004 device ID! I remember people saying that after that fresh Windows installed, there are 6 unknown devices or more. I got only 5. [Device fingerprinting, 3 x MemCard player and IR receiver]. There is no accelerometer... Also, when I try to install the drivers/software, windows appears:

  ProtectSmart Hard Drive Protection: with the text Property.AccelerometerNotPresent

  and then another saying something like features were not installed due to wrong installation or not supported feature.

  So now I'm stuck with a laptop it is dangerous to travel with, because the disk is no longer protected

  I have already installed all the drivers available on the HP page, even downloaded those newer Intel (chipset) etc.

  Is there a solution to this? Has anyone else encountered this problem?

  Windows 7 is officially released and available in RTM version, not beta, so I think that HP should open support in his favor and release new drivers for win7! And above all, to solve this problem...

  If anyone is interested, this problem is solved now.

  Just download the new drivers from http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 321957 & prodSeriesId = 3744188 & swItem = ob-76187-1 & mode = 4 & idx = 2, install and make sure you have the latest version of the BIOS. Tested - heads are being finally parked! Yay!