separator bar color becomes transparent

Similar Questions

• Phone numbers in Mobile/tablet mode become transparent? No idea why?

  I have created the mobile and tablet version of a site and noticed the phone number on the mobile version has become transparent. In design, it is clearly black text. I downloaded the design on the live site and it turns white out (on a white browser fill) but the text is there because I can always reach the number and call option appears the iPhone.

  Any ideas why this happens?

  The text is moving towards a link automatically on a phone and a tablet. It's normal.

  Go to site settings and create a new style of link and set it to something other than your background color. And then apply the style to the text.

• Overview unwantedly convert a color to transparent (!)

  Hello

  I use a snippet to open png files and save them to gif format (to reduce the size of the file).

  The files are a book cover, including an orange background, with red, white and dark gray text and graphics (curves).

  Yesterday, it worked well.

  Today when I save as gif red color in the image disappears. I guess that it is transformed into Transparent. I see where the red text and graphic lines were is the background orange.

  Preview was not doing this yesterday.

  Today it is the same on the png files that I created yesterday, so I'm sure that change is in the preview, not Inkscape (which I used to create the PNG).

  I do not use the lasso or other tool to select all areas of the picture and enable transparency.

  I open the image, choose the export file to gif format and with the box checked and checked alpha, the color red is disappearing and I don't want it.

  Any suggestions much appreciated.

  Overview 8.1 (877.7)

  10.11.6 OSX

  Thank you.

  Do not use the gif. It is an older format, limited to 256 colors. It is quite insufficient for most uses (with the exception perhaps of dubious of these short "animations").

  One of the unique features of gif should have 'transparency' - but which has been achieved by stipulating a particular table as color being transparent (and not, as in modern formats, by adding a fourth channel, called "alpha channel" to the series of red, green and blue).

  Somehow the red in your translation got to be designated 'transparent color '.

  If you want to reduce the size of the file, try saving to jpeg and quality change to achieve a good balance between size and quality.

• How can I remove a black stoke when the stoke color is transparent?

  Hello

  I hobe you can help me. I have a way is white and the stoke color is transparent, but it seems that it is black. When I record, he is still there.

  How can I remove it?

  

  Window > layers

  Window > appearance

  These two indicators show you that something that applied to a layer

  It goes the same for a group

  

• After inserting a mock-up (LOGO PNG) in my shine card it becomes transparent, only vague lines are visible. Help, please!

  Im working on a film for the introduction of logo in After effects. Unfortunetely when I insert my composition (PNG or JPEG) in my card smash it becomes transparent. This is why the logo can not be seen. Only vague lines can be seen. Is that a graphics card problem or can it be resolved?

  
  Help, please!

  Thank you very much for the quick responses. I found the problem myself. I did not put my opinion shatter on "renders"!

• Need good resources to learn the separation of colors in Photoshop

  Can someone recommend a good resource to learn in detail the separation of colors in Photoshop.

  Specifically RGB to CMYK file conversion best practices.

  ojodegato wrote:

  Specifically RGB to CMYK file conversion best practices.

  With modern color management, it's much simpler than it used to be (and is usually much better, just check the colors of the 80s and 90s reproductions).

  It is not done by numbers more. You get the good CMYK profile for the actual process, test to verify the clipping and then convert them to the end. All the necessary settings are integrated into the profile and things like total ink limit and so on are more a matter of concern.

  The profile must be provided by the printer. Offset presses are usually standardized in Europe mainly in the ISO 12647-2 standard, elsewhere in the world, other standards apply. This means that you can often use standard CMYK profiles. But you should know that one.

• Since the installation of LR 2015 2.1 when I import from a card, that RAW files are OK by my JPEGs are blackened. The images are there because if I convert to black and white and then back to appear momentarily before color become blackened again

  Since the installation of LR 2015 2.1 when I import from a card, that RAW files are OK by my JPEGs are blackened. The images are there because if I convert to black and white and then back to appear momentarily before color become blackened again? Any ideas for help?

  Hi rsev,.

  For existing photos, select all your images in the grid view, and then click the Reset All button in the quick develop Panel. Then click on the auto tone button to correctly apply this feature.

  To prevent this from happening in the future, choose Lightroom > preferences > Presets (Mac OS) or edit > Preferences > Presets (Windows). Uncheck the apply auto tone adjustments.

  Reference: thumbnails appear black in Lightroom CC 2015.2/6.2

  It will be useful.

  Kind regards

  ~ Mohit

• Colors become progressively darker in Photoshop?

  Hey, guys - I'm new and using photoshop CS5 and use a Mac 10.6.4. I draw cartoons, so I often design line and an underlying layer for colors. But whenever I use the brush and make more strokes, colors become progressively darker until turn into black. I have a feeling it has a fancy photoshop name and I accidentally turned it on, but I don't know the name... It's really holds a lot of my projects and if you have something to help you, please tell!

  Thank you

  Think to can you have defined your mode brush to multiply

• The bar color on most, but not all, https sites is blue and not green. This means that they are not secure after all?

  Until recently the small color bar next to the address in each open tab was green for https sites and clear for open sites. The color for most sites https including my Bank is now blue. Some are still green, but most is in blue. Does this mean that sites are be pirated? Not sure? or something else?

  N ° which are the only certificates that are validated in different ways.

  Green means 'Extended Validation SSL certificate' and blue means a 'domain SSL certificate.

  See:

  • https://wiki.Mozilla.org/ca:glossary
  • https://support.Mozilla.com/kb/site+identity+button

• Dark on the screen colors become red lines - Satellite P200D - 11L

  I have this problem since yesterday: sometimes the dark colors on my screen becomes red lines.
  It is not a problem with the display LCD, in my opinion. It happened on the home screen when I turn on my laptop.

  So it is not with the OS or drivers.
  The problem would be with the graphics card?
  Will I need to communicate with the specialists of toshiba? I hope that's not very serious.

  If possible try to test with the external monitor. When the same appears on the external monitor, faulty graphics card is responsible for this. In this case, you need professional help.
  The warranty is still valid?

• Can I change the application title bar color?

  With a number of open applications and windows a standard color grey silver it can be quite difficult to quickly locate a title bar to move a window.  I don't see any option in system preferences to change the color of title bar.  Can it be done?

  OS X does not have this facility.

  You may be able to find a third party extension that can do the job, but my advice would be NOT to install this software.

  C.

• How to replace a specific color with transparent colors?

  I need to get the image of a control, but I want to change the background color of the control with a transparent color (like the handly image editor).

  I can't use the library IMAQ, so I would use the palette of the 2D image.

  I can read the pixel of data image by pixer, but... once the color replace is located, how to replace them with transparent?

  Thank you all

  It looks like you want the Mask.vi to 'create '. If this isn't the case, you can provide a code that indicates what type of situation, you do business with.

• Update bar color of char in the evolution of the temperature values

  Hello everyone. I actually read a temperature sensor and plot the data in the form of a bar graph. I am acquiring the data every second, and present them in a chart bar. the challenge is to show different colour on the bar chart that the temperature will dangerous.when playback security are safe, the graph must be red red, when there is just the graph must be orange and dangerous. I'm using Labview 2012.I need to get started as I'm actually learning the software.

  future prospects for the hearing from you guys.

  Yannstephen

  Using a range of set a defined value is something that comes up fairly often. Here are two solutions that may apply to you. The first uses logical operators and work as expected.

  

  However there are disadvantages to consider: what happens if you decide to add more beaches that have different meanings? This solution is well-suited and will become very difficult to maintain. The second solution solves this problem by using a Structure box. Note that the case structure only accepts integer values in the terminal of selector. You can read about workaround implemented here.

  

  I hope this helps!

  -Nate

• The Windows scroll bar color changing

  Hello

  Is there a way to change the default color of the scroll bar in the windows?

  Thank you.

  Nelly

  It's actually a under HKCU\Control Panel\Desktop registry setting, but please note that the scroll bar shares the same color as the buttons ("3D objects" in fact), so that your other components of the window will be will share the same color.  There is no way, without counting as WindowBlinds from StarDock software, change the color of the scrollbar independently.

  If it solves your problem, click on the link "Propose as answer" below and vote as useful by clicking on the green triangle for the lelft. Thank you!

• Publisher 2007 when I save as PDF, the red color becomes grayscale.

  I created a document in Publisher 2007.  I used the font color to red and saved.  When I then its ved to PDF or XPS, red font converted to grayscale in PDF and XPS.  No idea how to solve this problem?

  Hello Rburla,

  Welcome to the Microsoft Answers Forum!

  I suggest to change the color of the text in the Pdf file by accessing the properties bar by pressing Ctrl + E and change the color of the text that is selected according to the needs and save the file and check if it helps.

  For more information about how to convert publisher to pdf files or xls files, please see the links below.

  Save a publication as a PDF or XPS file

  http://Office.Microsoft.com/en-us/Publisher/HA100649921033.aspx

  http://Office.Microsoft.com/en-us/Publisher/HA100643861033.aspx

  How to create a PDF file in Publisher

  http://support.Microsoft.com/default.aspx/KB/302835

  If the problem persists, you can post your question in the Microsoft Office community for best results. Please visit the link below to find a community that will provide the support you want.

  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Please get back to us if you have any other questions.

  Thanks and greetings
  Mir - Microsoft Answers Support Engineer
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads