Sequence of RAM

Similar Questions

• sequence of the RAM on the card mother dx58m01

  I have a dell xps 435mt core i7 920 with a studio card mother dx58m01. There is 6gig ram. 6x1024mb glue 1066 mhz. I want to change ram at 3x2gig sticks memory triple channel 1600 mhz. does anyone know the sequence of installation for this configuration. I currently at 1,3,5. It seems to run pretty slow however. Thank you guys

  Contact Support technique Dell http://support.dell.com/support/topics/global.aspx/support/dellcare/contact_technical_support?c=us&cs=19&l=en&s=dhs& ~ ck = anavml and give them your express service code and/or your product tag so that they can identify your specific machine.  Are all devices that are identical except for the new chips?  Then they should be able to tell the order to use because they know a lot more about their systems we do.  We could just guess they know.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Strange green line appears on the bottom of the frame of sequences (NOT the ONLINE PREVIEW RAM)

  Hello!

  I've recently upgraded to AE CS5, after long use of CS3.  I came across a problem that I hope there, someone can help me with.  For one of my elements of film a green line (one pixel high) appears at the bottom of the frame.  The green line appears in the layer panel, so I'm not there with plug-ins display - only it's purest form.  When I open the file in QT on my Mac, the green line at the bottom of the image is not there.  This has not met with the CS3 version, and I'm lost for a solution.  I did some googling and found some users AVID talks about a similar problem and was related to the fields.  So I went to 'Interpret the film' and then removed the fields with 'Lower' first and the green line goes.  The problem with this work is about the film looks so poor.  This is a digital image file, and I wouldn't remove fields because there were not at first.

  I have attached a few screenshots of the images in QT and AE CS5 for you all to see the question.

  Has anyone encountered this problem?  Is this a known problem CS5?  Is it related to OS x 10.6.5?

  Any help, advice or advice is greatly appreciated!

  Thank you!

  

  

  There is nothing to fix, and it's not a bug. For MPEG of any sort, all dimensions must be multiples of 2. It is inherent to the work of compression. You can not have a high 219 px film and not have it be cropped or enlarged pixel, with all the negative sides. I assume that the file is in fact already 220px high, the only difference being that CS3 can interpret correctly flag Quicktime display area, considering that this happens not in CS5. Which could be considered to be a "bug", but because Apple does not provide a 64-bit Quicktime and Adobe had to reverse engineer things, who do you blame? Yet once, it is not really something wrong here. In fact, the same file read on another computer or in a setting different software player can expose the same question, even when working in CS3. So the only real 'fix' is to properly encode the file 218px or 220px high. And the fields do not belong in desktop images. Apart from EI the irregular line will also be visible no matter how AE only displays a field both internally. You will need to handle this correctly, even though you may not want to.

  Mylenium

• Satellite Pro A120 (PSAC0E) does not start after upgrading RAM

  Hello

  I hope someone can help me here, I recently bought a Satellite Pro A120 (PSAC0E) and decided to upgrade the RAM. I bought a stick of 512 MB of curries with the following specifications: DDR PC2700 200-pin 333 Mhz SODIMM (64 x 64).

  However, the first problem I encountered was an alignment problem. A little effort and handling solved this, but after you insert the RAM into the available slot, the computer laptop wouldn't boot, and instead, I had the flashing sequence on the LED from 2,3,3.

  I was told it might be a problem matching, then tried to remove the original RAM and booting with just the new stick, still the same error. I tried it in the slots and still no joy. It starts very well with the original 256 MB of RAM, but refuses to take the new RAM.

  Are there any known issues? Can anyone suggest something that I can do wrong? I followed the usual steps of upgrade to remove all power cables and the battery before the upgrade, but still no joy.

  Hoping that someone is able to help!

  Hi James

  You simply have bad memory modules and is not a compatible uses.

  > the first problem I encountered was an alignment problem. A little effort and handling solved this,

  This should not happen! The right modules can be inserted without any problem of alignment!
  Handling can damage the module!

  In my opinion, you should use another and supported the RAM module.

  To my knowledge, you can use the PA3512U-1M1G (DDR2-667 1 GB Memory Kit) or (PA3411U-2M1G) DDR2-533 1 GB
  The two should be compatible.

• OSX does not boot sequence make

  Hello

  I have a MBP 15 "(early 2011). I7 2.2 GHz, 16 GB at 1333 MHz DDR3 RAM and it runs OSX El Capitan 10.11.3 Version.

  A few years ago I have moved the "old" SATA HDD to DVD Bay using an adaptation set and installed an SSD as drive system (and added a few extra memory in the process). Everything worked perfectly up to one month, when all of a sudden, he didn't get through the startup sequence after you enter the system password. The process indicator basically stopped at around 60%.

  Using virtually all options to restart the Mac as explained here (randomly): combinations of keys start for Mac - Apple Support , I was able to recover the system, every time, but after a few days or even a week the problem occurs again.

  Some details of the event and recovery:

  -Mac just stops and restarts

  -You here the start-up tone and see the Apple logo

  -Enter the password for the user

  -Indicator process stops at 50-60%

  Recovery process (do not know which of the following actions really toured well (or which combination / sequence!).) After each attempt to start, I have to do a hard reset using the power button.

  -Try boot in SafeMode (screen remains white)

  -Single user (screen stays white and you hear fan noise)

  -Reset NVPRAM (no difference)

  -Don't start with 'Diagnostic test of the internet' - no defect found during extensive testing

  -Start in verbose mode (machine hangs after that "nspace-Manager-set-snapshot-time" will appear on the screen)

  -Try to boot from USB key (screen stays white and you here the fan noise) to OSX bootable

  -Start in safe mode (it then actually starts in SafeMode as expected)

  -Do a reboot of the 'normal' system (result: MBP starts normally as it should)

  Only yesterday (after the start in normal mode) the screen and the MBP froze showing this (actually using the Console application):

  

  BTW - I did not see this during one of the other occurrences, so I don't know if this is purely related to my main problem.

  My questions (and shout for help :-):)

  -Is this someone has an idea what may be the issue and how to confirm this?

  -In what files newspapers could / should seek to find the culprit (assuming that something related to this is actually connected)?

  -What other tests / scenario could I try?

  Thank you very much in advance for any help, comments or suggestions!

  M!

  It looks like a hardware problem (graphics card). This year 2011 many Mbps this error, he even had a repair action going. I'm not sure that this action is still running. Check with Apple.

• Satellite L30 - 10W shows 894 MB of RAM only

  Hello

  With advance sorry for my English. I'm Polish and I use Google Translate because I know too much English but I think that you can somehow not the TRAINER TR? in spearwood.
  I have a problem that really bothers me. Namely, the laptop I installed 1024 MB of RAM, but the bios and the system itself (Windows XP SP3) I can detect only 894 MB of RAM. And my question is: is it possible, it not? And if so, why. I tried to manage myself somehow. Convert the sequence of the RAM (in the slot machines), set individually, but it still does not work. Below the type of RAM (as both are identical). Everest he showed to me.

  Module name: Hyundai HYMP564S64CP6-C4
  Serial number: 04004172 h
  Manufacturing date: week of 4 / 2007
  The module size: 512 MB (2 rows, 4 banks)
  Module type: Unbuffered
  Memory type: DDR2 SDRAM
  Speed of memory? : DDR2-533 (266 MHz)
  Module width: 64 bits
  Voltage of the module: SSTL 1.8
  Method of error detection: no
  Reduced refresh rate: 7.8 (US) Auto Refresh

  Memory clock:
  5.0 - 4-4-12 @ 266 MHz (CL-RCD-RP-RAS)
  4.0 - 4-4-12 @ 266 MHz (CL-RCD-RP-RAS)
  @ 200 MHz 3.0 - 3-3-9 (CL-RCD-RP-RAS)

  Manufacturer of memory modules:
  Company: Hynix Semiconductor Inc.

  Well well, to throw in addition to information about my BIOS:
  BIOS type: Phoenix
  BIOS date: October 24, 2007
  BIOS ID: Phoenix 4.0 Release 6.1 NoteBIOS
  BIOS OEM: v3.10
  Chipset: VIA 82 3038 rev 97
  SuperIO: unknown
  Manufacturer: Toshiba
  Motherboard: Satellite L30

  Hello

  According to the specifications of the laptop your L30 has ATI RC410MD graphics card. I m not 100% sure, but I assume that it is the shared memory card which means that certain amount of RAM will be used for graphics operations. Due to this RAM more low value appears in cell s system information.

• Start stopped Equium A110-276 - seems less RAM slot is defective

  Hey there.

  I am trying to sort my latop comrades. He just stopped start one day, when the power button was pushed the power light light up, the DVD - RW would scan for a disc and the brief of HDD LED illuminated. The screen never showed any output, remains black.

  After a call to Toshiba, I decided to take a look at the RAM. It seems that the lower slot is faulty. The 2 sticks of RAM work well in the first slot, bringing the machine at the STATION and the shoe, like three other sticks, I tried.
  None of those tested work sticks worked in the lower slot, either by themselves or with the top slot filled.

  In addition, unlike most chess slot of RAM I saw, instead of the slot has been 'dead' (that is to say memory not recognized and begin with only the location of work), it seems that the POST sequence is interrupted as soon as the HARD drive is questioned (the sequence of work is the HARD drive light flashes, then the monitor active) which would lead me to believe that the post is the gel as he tries to question the faulty RAM Bank.

  Yes, is there one option, other than a new motherboard, which can help get this slot machine working again? I've already thoroughly cleaned, t no effect and does someone has an idea why this would happen? The laptop has a life very easy, rarely used, always stored in her purse and enough dust, not hard fall or shocks either. Today was the first time the access panel RAM had even opened, it was factory-equipped memory.

  For now, he can run with the RAM one module, and at least he has the opportunity to get a 2 GB module to make up for the shortfall.

  The BIOS version is 1.20

  Hello

  My book of 8 years had the same problem. One of the slots was defective.
  I put t don't know why, but after a long period of use, it did not work.
  So I had two options; either replace the motherboard (not possible because the mobo would cost as much as the entire notebook) or not to use only one bank of memory.

  I bought a 1 GB of RAM instead of 2 x 512 MB, and now the laptop runs to search using a single module of RAM.

  It may be an option for you. If this isn't the case, then a replacement of the motherboard would be required.

  Good bye

• Satellite P305D - different error during the startup sequence

  Hi I have a constant problem I have no idea how fix it. I have Windows Vista Home premium loaded and it works very well when it is running. I can restart the laptop several times and it starts perfectly, if I turn it off for an hour or two and go to start it always happens with a different error during the startup sequence. Most of the time I just go to start Windows normally and it loads, other times I have to go to the ERD.

  I uninstalled Vista and wipe the system well before reloading (using another drive) and the same thing happens. Would it be more likely to be hardware related? I know the battery charges well and I ran all the tools that Vista has to check the hard drive, so I don't know where to go next.

  Any help would be appreciated.

  Terry

  Hello

  Can you please post what errors you get during the boot process?

  In my opinion it could be a hardware problem, because you have already tried to reinstall Vista, so I doubt that the error is software related.
  Strange, but it might be a problem of RAM or HARD disk. The two parties, you can test it with Memtest86 and Drive Fitness Test. Google is your friend to find these two tools.

  In the worst cases, you must go to an authorized service provider. Technicians can check the entire notebook.

• Context of the sequence becomes invalid when the runtime is longer

  I have a sequence that loop for about 70 k iterations (which is pretty huge). The sequence called a subsequence where the inhabitants of the sequence called are modified. Question is, around 65 th iteration k, I get an error message indicating that the reference of the local past is invalid. The number of iterations when the error occurs varies from one computer to another, but always in the 65 k range. When I try to run another sequence (a single) consecutively, I get an "out of memory" error I guess the reason why the local reference is not valid because TS execution stops when the memory TS gets the complete decision-making context of sequence and therefore the reference local section not valid.

  I would like to know how to reduce the consumption of memory of TS because I disabled the result of record for all the result of sequences (Configure-> Options of Station-> run), disabled registration for each iteration of the loop, optimize no reentrant calls thi sequence is also enabled. I even tested with just this sequence of sequence and I wonder if there is a maximum number of threads of execution when a loop.

  PC configuration

  RAM-12 GB

  LabVIEW and Teststand 2010 SP1

  I will not be able to view the code, but the closure is a custom step which has sequence call as its adapter.

  Hello

  I tried this:

  Main sequence called a sub sequence, which includes 3 stages of instruction.

  I have a loop sequence sup to 75 k with result logging enabled.

  TS runs successfully - no problems.

  Try to jump steps (one at a time) in the sequence of sub to know at what stage leads to this question.

  Also try to reproduce using a simple sequence (that you can post online).

  Ravi

• access stationglobals of RAM

  In general, how will be accessed during StationGlobals? TestStand access them each tim on the hard disk as the file stationglobals.ini, or is it a copy of this file in the memory?

  The substance of my question is that I have access to some globals several thousands of times in my sequence, and I mean he can save access to the hard drive, unlike globals access to any file on the hard drive instead of station.

  Mitulatbati

  Overall are stored in ram. When the engine stops, they are stored on the disk. You can make them persist at any time by calling Engine.CommitGlobalsToDisk ().

• 7020us dv7: Hp Dv7 7020us try to reinstall windows 7 from USB with new HD and RAM sticks.

  Hello

  In a bit of an affair with my Dv7. The laptop started to meet a load of startup error. Try using the recovery in Start menu tool led to a blank screen. You try to start windows normally flashed a blue screen too fast to read and then started the boot sequence all over again. I made a recovery from USB on my HP m6 s SO. However try to boot from the drive did nothing to change the way the computer tries to start.

  I decided to simply upgrade to a 1 TB Toshiba HD and 16 GB of RAM. Everything installed with ease by making sure that I was not on the carpet and have myself grounded to the metal structure of the laptop while working on it. However, starting with the new HD, I get the error SMART 301. If I try to run a diagnosis of HD happens "Not available" as the result of INTELLIGENT analysis and short-and long-term. I don't get then the no display device bootable detected. I tried to play with all the settings of the BIOS without changing boot.

  I don't know what to do now any guide I found said to use the recovery disk/drive in the boot menu. All of the guides I found for the creation and verification of a recovery device assumes that you have access to a functional desktop.

  Could I really have gotten a bad HD or s it showing not available because it is not configured for the SMART test?

  Any help is appreciated. I really enjoyed the two Dv7 I've owned and do not want it to turn into a paperweight.

  Although he remained until about 03:00, I had actually work on my own after few more search.

  I found a discussion saying that USB flash drives created using the Recovery Manager contains the recovery tool, but not a copy of windows for the restoration of the system. Given that I made a copy of the recovery media with my m6 SO, I was out of luck.

  Do some research more I found an article from a reputable site which links to a mirror of the files digitalriver. I don't link or discuss much more I know most of the forums do not like the word 't'.

  I however checked checksum SHA1 file against the official registration of the ISO file windows.

  Formatted the USB stick which was the Manager of recovery on it and turned it into a bootable USB key. Downloaded the drivers listed on the site of HP to get my WiFi market to download the rest of them directly on the Dv7.  All checks very well now. The 1 TB HD no longer displays the 301 error.

  I tried to reset the BIOS and make also a BIOS for emergency return to zero. Not more than anything.

  Thanks for the reply it would have been interesting to see what we could have done.

  Can you confirm what I've read about the creation of recovery media regarding the USB is different from a CD?

• upgrade RAM not recognized by BIOS

  I have a pavilion dv6t-3100 Entertainment series that I had upgrade the system RAM to 8 GB to 16 GB.  The system startup stops but so too demand placed on the system.  I see that the BIOS didn't recognize the 16 GB but running system and another diagnosis tools to see all the 16 GB.  My question is how do BIOS to recognize the 16 GB of physical RAM?  Should I Flash a BIOS newer or even force him to re - initialize or is it a key sequence / start that will solve this problem?  I hate to give up the extra RAM without a fight.  Thank you, jwillar

  All indications are that the system tops out at 8 GB of RAM. You try to stuff 20 pounds of sugar in a 10-pound bag. It is not entirely the BIOS but also material of the motherboard which imposes the limit. It wouldn't do any good to Flash the BIOS, but it can't hurt. I wouldn't try to do it with 16 installed concerts; who would be in trouble. It starts at 8 GB and I mean 2 x 4 GB not just remove a module.

• I have 2 versions of windows vista running on my computer. One is before it crashed and it took all the RAM (Ram)

  I can't clean the discs because I can't load any programs because the memory has faded.  So I can not put a page of my computer desktop or download programs, I need to get my images that I have on the other program running.  I can't open one of these programs because I don't have the authorization even if I was always the user and administrator.  What I would do.  Can I add more memory Ram?  Can I remove the old stuff that I can't open anyway.  DLLs etc.  I downloaded vista 2pr, but it does not work.

  Hello

  Here is the information from your other question here about it:

  "I can't collect any information of my system information page."  When I connect I get redirected to a page that asks me what version of vista I want to open.  One is Microsoft vista and the other is windows vista.  The Microsoft is the only one that works. The other takes me a blank page. »

  "I have 2 versions of windows vista running on my computer. One is before it crashed and it took all the RAM (Ram).

  I suggest that you save your data and reinstall the operating system properly.

  There are several methods to reinstall Vista.

  See what methos works for you.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• 2 GB with 4 GB of ram in 2 different slot... it will create the problem?

  My pc contains only 4 GB of ram ddr3 on 2 + 2 on two different machines to & I want to spend 2 + 4 = 6 GB. So there will be a slot of 2 GB and 4 GB in another location. Will there be a problem with two different memory (I'm going to buy the same frequency & same ram manufacturer). So one slot will contain 2 GB and another slot will contain 4 GB will be a problem on the system due to the different memory size.
  My systm spec:
  Motherboard - asus m5a78l-mlx
  Processor - amd phenom II X 4 840
  4 GB ram ddr3
  Graphics - Sapphire 7750 1 GB ddr5

  Please please please help me. .. .

  The specifications of your system of M5A78L-M LX

  Specifications of the system as delivered by the manufacturer.

  Scan your system to view your specific system configuration

  DDR3 PC3-12800, DDR3 PC3-14900, DDR3 PC3-10600

  Memory type: DDR3 PC3-12800 DDR3 PC3-14900, DDR3 PC3-10600, DDR3 (non - ECC)

  Maximum memory: 16GB

  Slots: 2

  Although the memory can be installed a module at the same time, the best performance comes from the use by pairs of modules.

  How much memory your Windows OS will recognize depends on which version of Windows you are using. 32-bit versions of Windows will see (and use) only 3 or 3.5 GB. To use more memory, install a 64-bit version of your OS. More information about maximum rates of BONE memory can be found here.

  DRAM memory is the memory of 'work' of the computer. It is used to store data for programs (sequences of instructions) on a temporary basis

  Source: http://images.crucial.com/upgrade/ASUS-memory/ASUS+Motherboards/M5A78L-M+LX-upgrades.html

• dv6408nr VS samsung ram 2x1GB 800 MHz

  Hello

  I got 2x512MB inside and it wasn't enough, so I bought 2 x 1 GB on sale at auction

  http://Allegro.pl/item678169249_pamieci_sodimm_1gb_ddr2_pc800_do_laptopa_wawa.html

  but when I play in NFS carbon, my work stoppage, game for a moment stop display driver (black screen)

  his take half of mnute maby, game is runing but I can not play, because of big lag

  game myst be restarted

  When I put my old BONES, the game works properly

  I have all the drivers updated, bios to

  my point is - that something is wrong with the ram?

  --------------------------------
  Sorry for my bad English
  HP Pavilion dv6408nr - Vista
  external HARD drive - ubuntu

  My mistake. I trusted Crucial. Next time I'll check the first chipset model.

  Your video card uses system RAM. So this question point corrupted Ram I think.

  You check Ram with Memtest86 + or GoldMemory. Just burn it on CD *.iso file and run the test. You may need to change the boot sequence in the Bios (to get the BIOS press F10 boot).

  Few things more. Where you update graphics driver before installing this new memory?

  You can test how your laptop behave on old memory when you play this game?

  Can you post here too CPU - Z screen?

  What you bought is model CL6. CL5 is a better choice.

  See here information on here for your MODEL and latency settings.

  You wrote:

  'I got 3GB of ram but 2 + 1'

  After this information, I don't know one of the Bios updates the settings changed for Ram on this model and Crucial does not know about it. Even in the specs on the HP website there is information still 2 GB max.

  So hope it this information will help you at this time.

  Pozdrawiam. MAM ze hopes you information cos Ci dadza.