Serial number in the bios is different

Similar Questions

• Add serial number in the Bios

  Hello, is it possible add serial number in the Bios information?

  I have a 1323el dv6

  You can try this (totally not tested by me):

  http://www.diypcguide.com/how-to-fix-system-board-OOA-or-missing-system-information-or-product-information-not-valid-HP/

• Why my product number in the BIOS is different from what is printed on the laptop?

  I bought a HP Envy cl 4-1043 ultrabook and I created a set of backup on a USB key recovery.

  3 months later the 32 GB SSD is crushed and HP it replaced under warranty. The system unusable because of excessive corrupted files.

  The problem is now, I'm unable to retrieve the ultrabook using my recovery of backup series. The error reported is that the number of products reported by the BIOS is different from the one originally used to create the recovery image.

  The product reported by BIOS now number is B5T09UA #AB4

  What is printed on my ultrabook is B5T09UA #ABA

  The version of the BIOS is F.0B

  My question is why the product number has changed? He changed during the replacement of my ultrabook of the SSD?

  How I am now able to recover my operating system to Windows 7? I appreciate if someone can advise me.

  I suggest you contact the after-sales Service and sending it back to correct the error. It takes using a utility software owners to correct this problem.

  Best regards

  ERICO

• HP Envy Touchsmart17: Name of bad product and serial number in the BIOS has BEEN changed

  I have hp envy touchsmart 17 laptop changing a bios code.

  Dear I red your answer and I appreciate it. I did not plug the PC, I want to get the original serial number / product of the PC. Changed before you buy it, I don't want to get it back for certain needs I have to take. Please clarify for me on how to get it back. FYI, I went into my BIOS to factory setting and I couldn't because the HP Support responded by saying that my product has been changed and cannot get it.

  Please please answer

  Sincerely

• Update system-model and serial number in the BIOS on T61

  Hello

  We just changed the motherboard on a T61. After Windows XP starts, we would like to launch ThinkVantage SystemUpdate

  little, it cannot identify the T61 properly because the system Type is not correct in the BIOS.

  In the past, we were able to update it for example on the server X-Series starting with a BIOS update diskette

  and typing the correct values.

  How do I change them on a T61?

  Thanks in advance

  Welcome them

  Chakoe

  You will need the maintenance disk. It is only available to our technicians on the ground, technicians deposit and trading partners IBM/Lenvo. We are NOT allowed to discuss this for security reasons. Hope you understand.

  If you are a business partner, you are more than welcome to go to the website of Lenovo business partners or contact them by phone for help with this question.

  Kind regards

  Mark

• How can I fix the serial number and the product number in my bios cq61-410us?

  I have a laptop HP 18 months, with Windows 7.  It worked wonderfully in all until he decided a little there is to lose the serial number on the bios information.  Thus, he thinks now that I have a copy of counterfeit Windows.  How can I restore the serial number and product number in the bios information?

  Hello

  The only practical way to achieve this is to contact HP via the corresponding link below and to make arrangements for this information re-tattooed to the bios to a service center authorized.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• HP DV7-3063cl laptop PC: BIOS cannot locate the serial number of the new motherboard more PXE - E61: Media test failure, check

  I have recently restored a HP DV7 3063 cl laptop that died a hot mother (MB). I replaced the MB with a new Board of Directors of HP when the price has been reduced to $100, updated the CPU with an announced as new AMD 640 M and applied Arctic Silver on CPU and graphics chips. I put in 4 G memory cool, got the computer to work and installed Windows 10.

  However, I have several problems:

  1. The BIOS cannot locate the serial number of the motherboard during the boot process and sends a message to the effect. I hit the ENTER button start continues.

  I tried to access the BIOS to enter the serial number or other possible solutions, I found online. Help forum a HP had a BIOS software tool for editing of Compaq in 2000 but said it would only be on the desktop and HP staff will provide a BIOS for my laptop.

  2. I get two error messages that

  • PXE - E61: Media test failure, check cable of

  • PXE - M0F: Exit PXE ROM

  I didn't know all the patches for this issue, but it only delays the process of starting shortly before it continues.

  Finally, the computer starts Windows, but other problems.

  mhscholder,

  There isn't any publicly available method to update information in the BIOS.  HP only authorized service providers can update the MB after installation.  You will get this message during boot every time.  You also won't be able to run a recovery since the recovery media is looking for this information.

  The PXE errors generally occur during the initialization of the network is listed in the boot order before the hard drive.

  -wes

• How to change the serial number when the system board is replaced

  How can I change the serial number of the system in the bios of a D530 SSF when replacing the motherboard?

  Hello:

  I suppose that if that's all you can do with this utility, then it of all you can do.

  I do not think I said that the utility likely to modify or add the model number, nor asked the question originally.

  You will need to contact HP technical support and have a technician HP bios with any other information you need to tattoo.

  Paul

• Serial number in the registry key

  I have an old hard drive to a laptop that was stolen recently.

  I tried to find its IP address, but said that would be unnecessary because I used a home router.

  Since I have unable to write down or cannot find the information from my old PC, is there a Reg Key file would have the old serial number of the laptop?

  Where can I find the IP address, which would be useful?

  TY,

  Michael

  The serial number would be recorded in the BIOS, not the registry.

  The internal IP is probably dynamic and is newly assigned to every start.

  The external IP address is probably also dynamic and is assigned by your ISP.

  What do you hope to gain by knowing its serial number or IP address?

• Reinstall Windows 7 after adding RAM does not work, if the serial number on the hard drive doesn't go to Microsoft?

  The serial number of the hard drive go to microsoft, I went to reintall my windows after it kept crashing, updated my hard drive, memory, ram.  I think because the serial number is different on the hard drive, it will not be installed.

  System becomes inadmissible has nothing to do with the product activation.

  The probable cause is faulty RAM or loose, make sure that the memory modules are firmly fixed and mounted in banks of memory on the motherboard.

• I have the computer hp pavilion dv6 laptop. where the serial number of the product is written on the product?

  Can you please provide the location where the serial number of HP Pavilion dv6 is mentioned? As always, I need to enter this number every time I visit to any client. I have not found that it mentioned anywhere. Please provide.

  You can find the serial number of your laptop through one of the means.

  1. The Service Tag (bardcoded sticker) inside the battery compartment of your laptop that would have the serial number of your laptop
  2. Turn off the computer and once you turn on, keep pressing the F10 key to load into the BIOS screen, and you can locate the serial number in the main menu
  3. Power off the computer and once you turn on, keep the button pressing ESC to load the start menu. In the start menu, you need to press the F1 key to load information system
  4. Once you have access to windows, press FN + ESC key simultaneously to find a popup that displays system information from your laptop.

• Recently switched from PC to Mac. I have the CD for the CS6 Adobe Creative Suite for Mac and PC. How can I get the serial number of the CD Mac OS with no disk drive?

  Recently, I switched from PC to Mac. On my PC, I got the Adobe Creative Suite Design & Web Premium (academic edition) CS6. I bought the product through my school and have two installation CD, for Windows and Mac.

  I try now to download this product on my new Macbook, but do not have a hard drive. When I check my saved items, it says that I have the Creative Suite CS6, but under the platform, he said "Winner" and serial number is for Windows product. Of course, this won't work for my Mac OS.

  So my question is, how do I get the serial number of the installation CD Mac OS with no disk drive? I guess that the numbers are different because when I put the Windows product number in the install window on my Mac, it does not work.

  So my question is, how do I get the serial number of the installation CD Mac OS with no disk drive?

  You use this procedure to share your serial number CS6 win to Mac CS6.

  Exchange a product Adobe of a different version of the language or platform

  Download the Installer application download Adobe Creative Suite 6

• I purchased Adobe Premiere Pro CS4 in 2009 for Windows, but now I use an apple computer. Please can you lucky my serial number of the version of windows in a Mac version?

  I purchased Adobe Premiere Pro CS4 in 2009 for Windows, but now I use an apple computer. Please can you lucky my serial number of the version of windows in a Mac version?

  First of all, this isn't Adobe.  This is a user to user forum.  We are customers like you, with the exception of a few employees from Adobe that are similar to.

  Second, Adobe doesn't support a change of platform (operating system) for current software versions, although you can switch to another platform:

  Exchange a product for a different version of the language or platform

• How to enter the serial number for the sales order line that has shipped status

  Hi all
  
  We have 2 different items that are defined as serialized in question sales to the definition of element order.
  
  In order for a sale, user forgot to add the serial number to one of the item to Ship confirm step.
  He entered the serial number correctly to another element.
  Now the two lines in sales order have shipped so status view us through shipping > operations.
  
  I'm technical and new guy at the OM could if it you please let me know the process to enter the serial number for the item for which the user has failed
  
  Thank you
  Satya

  Hi Satya,
  Given that the article is already shipped, you can enter the serial number for this line.
  You must enter the serial numbers after picking confirm only.

  check this note
  How do I enter the serial numbers in the form of delivery operations [ID 1235403.1]

  As a workaround for previous lines don't RMA and try to receive the goods at your subinventory.
  For all transactions again follow the notes above.

  Thank you
  -Arif.

• How to find the serial number of the processor in the MacBook pro s serial number? I have a dead MacBook that was given for service to a third party. I doubt that they have replaced the original parts. Help, please. Thank you

  How to find the serial number of the processor in the MacBook pro s serial number? I have a dead MacBook that was given for service to a third party. I doubt that they have replaced the original parts. Help, please. Thank you

  As far as I KNOW, the serial number of the MacBook does not have the serial number of the processor.