Serial RS232 Communication VISA write does not

Similar Questions

• Serial cable using IrDA protocol does not work correctly. Steve Stephens, * address email is removed from the privacy *.

  The difficulty it Center Microsoft said that my serial cable using IrDA protocol does not work properly.

  Appreciate any suggestions on how to solve this problem.

  Steve Stephens, * address email is removed from the privacy *.

  Hi, Steve Stephens.

  Did you run the fixit available in the link below?
  Hardware devices do not work or are not detected in Windows

  Method 1: Check for any error message in Device Manager

  When a device is not functioning, Device Manager also typically displays an error message with an error code that comes with it. First, search for errors in the Manager of devices to do this, follow the steps below:

  (a) open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.

  (b) If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (c) in the Device Manager, find your device, and then double-click the device name.

  (d) If an error code has been generated, the code appears in the status area of the device under the general tab

  
  Method 2: download and install all available Windows Update

  Install Windows updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

  Method 3: Download and install SP2

  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

• I changed my computer and am trying to re - install PS elements 13.0 on Windows 10. When I type my license serial number, Adobe responds "he does not recognize this serial number. When I go to the serial number recovery service, first he said he doesn'

  I changed my computer and am trying to re - install PS elements 13.0 on Windows 10. When I type my license serial number, Adobe responds "he does not recognize this serial number. When I go to the serial number recovery service, first of all it tells me it is not a product registered with my name and when I type the serial number for the old serial numbers, the system responds to that serial number is alredady registered and cannot be registered twice. What needs to be done to get out of this problem of serial number? Thank you.

  Hello Charles,

  to check this, you should take a look at the Adobe database to see what is stored/recorded on your accounts. You will find general information on your account Adobe https://accounts.adobe.com/> see My productsView all the > these products are associated with your Adobe ID > name > serial number.

  [And to find your serial number have a look here http://helpx.adobe.com/x-productkb/global/find-serial-number.html > I've lost my serial number >] see comments.

  The last time Adobe suggests so too this activation https://helpx.adobe.com/contact.html?step=ZNA_downloading-installing-setting-up_licensing-

  Hans-Günter

• I have CS6 on old computer and that you have disabled it. I now want to install the new computer. Downloaded and Set UP wrote the serial number is valid but does not CS 6 show as a product available. ???

  I have CS6 on old computer and that you have disabled it. I now want to install the new computer. Downloaded and Set UP wrote the serial number is valid but does not CS 6 show as a product available. ???

  Please have the link below to download correct application download Creative Suite 6.

  Please answer in a private message serial number that you use to activate it.

• How can I re-download Acrobat? I have my serial number but the order does not come under the heading upward my story.

  How can I re-download Acrobat. I have my serial number but the order does not come under the heading upward my story.

  Hi Roger,

  You can download Acrobat from the below mentioned link:

  Download Adobe Acrobat products. Standard, Pro | DC, XI, X

  Kind regards

  Rahul

• CS3 was suddenly asked the serial number and the serial number of the Cabinet does not.

  CS3 asked serial number all of a sudden, and the serial number of the box does not work.

  No, only support adobe or anyone else who can 'see' your computer can help you with a serial number problem.

  but you can uninstall your cs3, clean and reinstall then by use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

  and see if that solved the problem.

• Name of resource VISA get does not have USB serial ports

  We built an application on a computer that had a built-in serial port - COM1.  We have the option to change the COM port in the application.  We have installed the application built on a computer that has no serial port, but installed a USB serial Converter which records as COM3.  LabView does not see this port, even with a test application to return only the names of VISA resources.

  We have verified that the port is good with another program (a Modbus Simulator) and installed the last TIME VISA v4.41 separately without result.

  Any suggestions for more troubleshooting would be extremely useful.

  Joe T.

  My main of the application still does not work, but now the little test ones are.

  Here's what I did:

  1. update my LabView 8.5 with the last VISA - 4.4 runtime.  This update the installer as well.

  2. added the install MAX for the build.

  3. adding the Support of Configuration of NI-VISA for construction

  4. uninstalled the app and reinstalled with the new volume of the system.

  When I run MAX, COM3 appears.  He also appears in the application of test resources.  The simple test Modbus to write the program works, too.  I have a sneaky feeling that COM1 can be hardcoded somewhere in the parent application; our next task is to find where communication breaks down in our code.  The bottom line seems to be a lack of experience with the demand of our manufacturer.

  Thanks to all who participated!

  Joe T.

• Satellite A110-137: serial USB 1.1 Cable does not work

  My computer is Satellite A110-137 and the operating system is Windows XP Home Edition v 5.1 service pack 2. Language setting is the Finland.

  I have a prolific USB driver cable RS232 2.0.0.26 version 1.1.

  It does not at all. When I try to connect it to a package Kantronics KAM radio modem using Hyper Terminal there is an error COM3 message: ei voi games. Tarkista porttiasetukset. (COM3: cannot open.) Check the port settings).

  The settings that I have are 9600 bps, 8 data bits, zero parity, 1 stop bit, hardware flow conrol. It's the same thing in device driver settings and the settings of the Hyper Terminal. It is 100% sure that the problem is somehow related to Toshiba or Windows XP as the same USB converter RS232 perfectly works and right the first time with for example Fujitsu ErgoPro have Windows 2000 (and it's a machine Pentioum 233, very old stuff indeed).

  I can't get any help of Prolific, their home pages seem to be offline now.

  Hello

  I studied a little on the net and it seems that this converter RS232 USB 1.1 creates a virtual serial port (possibly the com 3)
  As far as I know the built-in modem is using the same port.
  Possibly there could be compatibility problems.

  However, this is not a product of Toshiba and this is why I would recommend contacting support of the prolific.
  I've been on the site and it of online.

• Serial number for student permit does not.

  My serial code does not work. I sent a request on 16 October 2013 and I still have the same problem. I don't know what is the problem but the problem is still there and I have the same message saying: "we cannot confirm the serial number for Adobe Illustrator CC. "during my activation. I don't know what to do as it been 4 days since I bought my University program.

  
  

  KarimS first, I recommend a check from your account to http://www.adobe.com/ you opened three separate cases with our support team and all three are waiting for your response.

  It also seems that if you are in North America and you have not purchased your software from Adobe directly.  Please visit http://forums.adobe.com/message/4634728#4634728 for more information on how to submit your proof of eligibility.  Once you have submitted your proof of eligibility, and it is approved, you will then be given access to your subscription.

  I also recommend that your e-mail address education in the presentation of your proof of eligibility.  This initiative will accelerate the process of you be made eligible.

• HP DVD Writer does not read or write DVD, but only the CD

  My HP DVD 1135t burner does not read or write DVD but only the CD. What is the problem? Please help me.

  CD/DVD players use different lasers for reading/writing DVD from the CD.  All indications would point to your laser DVD as having failed.  You could try to remove your drive and install it in another computer to see if the problem follows your player or your computer, but my bet is that the drive must be replaced.

  HTH,
  JW

• DVD writer does not eject

  My engraver of DVD from Toshiba, TS-T632, ceased to eject. There is not a disc in the drive, in fact, I replaced with a new writer. He still does not eject or open to receive a disc. Manual unlocking does not open it and I don't know what to try next.

  Hello!

  What is the brand of your DVD burner?
  did you ensure that it is connected to the power supply?
  There indicator light?
  If it is stuck, you can use a clip to eject it.
  Thank you
  Makoi

• I have PC toshiba laptop, my cd/dvd. writer does not read the CD software and not able to write the media__

  itshow msg

  Insert the disc pls

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  ===============================================================

  Check with Toshiba support, their drivers online (update or reinstall) and their forums.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Impression on XPS Document Writer does not record anything

  When I try to print in XPS Document Writer, nothing is saved.  The dialog box appears asking you where I want to save it.  I select the folder, type a name and save it, but nothing is written.  There is no error message or anything. It is enough to save.  I tried several different applications (Firefox, IE, Word, Wordpad), but this does not seem to matter.

  One note, however, is that I can successfully print/save a test page to the printer (which makes it even more strange) properties.

  I'm on Windows 7 Ultimate 64-bit.

  Any help would be appreciated.

  * edit * I also tried to remove the device and add it again.  It does not either.

  After seeing your post, I decided to revisit this issue.  Apparently I've solved it.  My problem was that the files I tried to save to have full control to administrators, but not by my user explicitly.  To test this, I ran Firefox as an administrator, and I was able to save/print the XPS document.  This obviously isn't the most secure solution, so I just added my name explicitly under the Security tab for my home folder and propagate the changes down.  It seems that I can now save without problem (and run it as an administrator).

  It's not really make sense to me, since I belonged to the admin group.  It seems that the Windows UAC at least inspire you or something.  In any case, it's working for me now.  Hope that helps you.

• TMS implemented at level 14.1.1 to 'Get SNMP community name' column does not allow NULL values.

  Hello!

  I had a TMS12.2 (via 12.6 and 13.2) to TMS14.1.1 upgrade.

  When I go to: systems > overview of the system and select all systems and all the settings, I get an error message.

  An order referred before you have a problem with the values of ip box.

  Is it possible that 14.1 upgrade does not correctly check if the empty database fields?

  How I'll fix it, did an upgrade using 14.2, or is it a sql command that must be executed

  (or some values to be defined)?

  Error details:
  Server Error in '/tms' Application.
  --------------------------------------------------------------------------------
  Column 'SNMP Get Community Name' does not allow nulls.
  Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
  Exception Details: System.Data.NoNullAllowedException: Column 'SNMP Get Community Name' does not allow nulls.
  Source Error:
  An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
  Stack Trace:
  [NoNullAllowedException: Column 'SNMP Get Community Name' does not allow nulls.]
  System.Data.DataColumn.CheckNullable(DataRow row) +2131738
  System.Data.DataTable.RaiseRowChanging(DataRowChangeEventArgs args, DataRow eRow, DataRowAction eAction, Boolean fireEvent) +5073836
  System.Data.DataTable.SetNewRecordWorker(DataRow row, Int32 proposedRecord, DataRowAction action, Boolean isInMerge, Boolean suppressEnsurePropertyChanged, Int32 position, Boolean fireEvent, Exception& deferredException) +195
  System.Data.DataTable.InsertRow(DataRow row, Int64 proposedID, Int32 pos, Boolean fireEvent) +344
  Tandberg.TMS.UI.SystemOverview.ViewSystemOverviewGrid.CreateDataSource(EmbedLinksSetting embedLinks) +6856
  Tandberg.TMS.UI.SystemOverview.ViewSystemOverviewGrid.DataBindToTMSGrid(EmbedLinksSetting embedLinksSetting) +171
  Tandberg.TMS.UI.SystemOverview.SystemOverviewView.SystemOverviewViewDataBind(EmbedLinksSetting embedLinksSetting) +196
  Tandberg.TMS.UI.SystemOverview.SystemOverviewHost.ShowModule(ModuleActions moduleAction) +115
  Tandberg.TMS.UI.SystemOverview.SystemOverviewHost.systemOverviewFilter_ModuleAction(Object sender, ModuleControlEventArgs e) +43
  Tandberg.TMS.Service.Navigation.TMSModuleBase.FireModuleEvent(ModuleControlEventArgs e) +22
  Tandberg.TMS.Service.Navigation.TMSModuleBase.FireViewAction() +34
  Tandberg.TMS.UI.SystemOverview.SystemOverviewFilter.viewButton_Click(Object sender, EventArgs e) +65
  System.Web.UI.WebControls.Button.OnClick(EventArgs e) +118
  System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +112
  System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +10
  System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +13
  System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +36
  System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5563
  

  Hi Martin,

  You see flaws CSCue22625. A fix was published in TMS 14.2.

  Kind regards

  Kjetil

• Serial number of Photoshop (Cs6) does not

  I bought Cs6 extend a few years back and the computer I had it on I had to throw. I disabled the Cs6 before throwing, but I tried to download to my new computer today, but the serial number is indicating that it is not valid. I never downloaded it on a computer and I have even disabled it so that I'm not sure on why it does not work.

  Exchange a product Adobe of a different version of the language or platform

  You will have to ask Adobe to share your serial number Mac for a serial number of Windows. Follow the steps in the link above.