Series Deskjet 3630: network connection

Similar Questions

• HP DeskJet 3630: I can't get my printer to connect to wifi

  I set up my printer and I tried on my phone to connect to the wifi and it wouldn't work so I unplugged and moved closer to the wifi. Now wifi has the word "setup" that he disappeared and only WiFi it is requiring a password I don't know

  Hello

  Your printer has a direct wifi feature that is enabled by pressing the key direct wifi on the front panel. This allows to directly connect to the wifi local printers via a password. When looking for wifi networks on your ios device, you will see the name of the wifi printer - to get the password fo rthis hold direct of wifi on the front panel to the dryer and it should print on plain paper for you.

  The other option for the wireless connection (and the most effective if you have a router) is to connect your device ios and printer to your home wifi network. You need to connect your printer to a windows or mac to establish this connection - I have included a link to the Setup instructions for each below.

  http://support.HP.com/us-en/product/HP-DeskJet-3630-all-in-one-printer-series/7172306/how-to

• SER all-in-one HP Deskjet 3630: printers and drivers

  How to install the software of HP Deskjet 3630 series all-in-one software on a laptop Windows 8.1?

  Simple, you go to the HP web site...

  http://support.HP.com/us-en/drivers/selfservice/HP-DeskJet-3630-all-in-one-printer-series/7172306

  Download the drivers and full software and install them.   Download your user guide and read it.  There is also an update of the firmware...

• DeskJet 3630: Deskjet 3630 factory reset

  Hello. I configured my Deskjet 3630 successfully then open EWS, disabled some features and set password. Since that time admin password is not accepted. I tried network settings reset (Cancel button + button WiFi) but it does not affect the EWS password. Tried the deactivation/activation and many other methods - nothing works. I need a factory reset and I have no admin password. Help, please.

  Hey @BrahmaHuman,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with a setting of password on printer all-in-one Deskjet 3630. For that matter, I suggest contacting HP Support directly. You can do this by clicking on this link and fill in the form below.

  Please let me know if you are able to clear the password. If you are, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• DeskJet 3630: Deskjet 3630 driver not found on mac osx 10.7.5

  I bought this printer hp deskjet 3630 and when I put the cd to install the driver, I found that it is not taken in charge my macbook osx 10.7.5

  so, what can I do?

  Note my macbook cant start 2008 my system update for any version of any mac osx, please help me ASAP

  Hello

  The printer is compatible with the Mountain Lion (10.8) or a later version, it is not compatible with your operating system. to get all the features, I suggest the printer back and get a previous model that suports of Lion.

  You may be able to circumvent such assistance an another print driver, such will offer only the printer and features advanced features not so much that the ink levels, management of printers, etc.

  To so proceed as follows:

  1 install the package on your Mac:

  https://support.Apple.com/kb/DL907?locale=en_US

  2. connect the printer to your Mac and make sure that it is turned on.

  3. from system preferences > printers and Scanners, click the sign more and select your printer.

  4. click on the reduction in the drop-down menu, then select printer software use.

  5. Select the HP Deskjet 3050 as another driver and click Add.

  For scanning, you try the 3rd party software VueScan which should be supported on Lion and support your printer:

  http://www.Hamrick.com/VueScan/hp_deskjet_3630.html

  Hope that helps,

  Shlomi

• Satellite A200-1js: local network connection does not appear

  Hey people

  I have windows xp sp3 in my Satellite A200-1js but my Ethernet connection does not shut... and I saw this in my network connections:
  

  And in my etiquette system shows this:
  

  I installed the correct drivers

  Everyone knows what is happening?

  Thnkx

  Satellite A200-1js belongs to the PSAE6E series.
  Just a few questions:

  You would update you BIOS to the version of Win XP?
  If it isn't-> do this!

  Have you tried reinstalling the driver Realtek LAN 5.664.205.2007 from the Toshiba page?
  If it isn't-> do this!

• HP DeskJet 3630 all-in-one: desjet 3630 does not print color

  Hi, I bought a new HP DeskJet 3630 series all-in-one printer today. Setting up the printer I did several tests that show color printing, however, whenever I try to print an image in color (working on my daughters school book) it prints in black and white. I did troubleshooting all I can think of, we have no black & white printing turned on. I'm not quite sure, what else to make sure the printer is brand new and should be able to print in color?
  Any help or advice would be much appreciated.

  Not quite sure what I did to make it work, di, but the cleaning cycle for the cartridges of ink & rebooted several times, and the printer is now printing normally =)

• DeskJet 6940: ethernet connection between the new modem and printer does not transmit Mac

  I just installed a new modem to Qwest; It works wirelessly with my iMac 10.11. My old (but functional until yesterday) Deskjet 6940 is connected to the modem via Ethernet. When I try to print, the document seems to be transmitted to the printer, but then it hangs on and I get the message "the printer is not connected" - which it is, plugged, ethernetted, and set in motion. Support of Qwest says that only 10% of the info from the computer are the printer, but he seems to think that the part of the new modem Ethernet is functional,

  I have already tried all unplug/restart/send/add printer new check/updates / IP (cannot connect) / ethernet ports and cables, etc.

  Any other ideas?

  Thank you!

  Hi @newgranny,

  Thanks for getting back to me.

  It is good that the printer has been able to print a diagnostic page.

  Ensure that the router and firewall on the market do not block these ports.

  • About the application firewall

  Ports of printing:

  • UDP ports: 427, 137, 161
  • TCP port: 9100

  Card photo upload:

  • UDP ports: 137, 138, 427
  • TCP port: 139

  The HP device status:

  • UDP port: 161

  Ports of Web Services:

  • UDP and TCP: 80, 443, 5222 and 5223

  Hello Ports:

  • TCP and UDP: 5353 and 5297, 5298

  Unplug the wired network (ethernet cable), restore the default values on the printer.

  Restore the default settings.

  Follow these steps to reset the printer to factory default settings:

  1. check that the printer is on.

  2. press and hold down the button to report Page.

  3 while holding down three times the homepage button, press the Cancel button.

  4. release the report Page button.

  Source

  • Restart the printer.
  • Connect the ethernet cable.
  • What were the results?

  If the problem persists, try the USB connection.

  Please reply to this message with the results. Good luck!

• DeskJet 3630: ePrint and duplex printing

  I'm trying to print from my HP chromebook on a deskjet 3630.

  I'm not understanding the various cloud of printing methods. I want to use a duplex and multiple copies. If I undestand things correctly, Google Cloud Print will not support it, but HP ePrint is (I think that I managed to connect a PC to the printer this way).

  So... can I (or how I can) install HP ePrint on my chromebook, to use it instead of google cloud print?

  Hello

  HP ePrint does not support duplexing in too...

  Doownload and using printing HP for Chrome, it provides you with the most controllable solution for Chrome OS:

  http://support.HP.com/RS-en/document/c04683559

  Kind regards

  Shlomi

• I need help in creating a connection to the LAN in my network connections.

  I recently performed a clean installation of XP Pro and I am unable to connect to the Internet. In my network connections, I have only the 1394 connection, but no connection to the local network.

  I've also included five devices problem identified by the Device Manager which are be annoying because no driver seems to be responsible.

  Problem of devices in Device Manager:
  
  1 Ethernet Controller PCI VEN_8086 & DEV_1050 & SUBSYS_815C104D & REV_024 & 2E98101C & 0 & 40F0
  The drivers for this device are not installed.
  
  2. multimedia Audio Controller r PCI VEN_8086 & DEV_24D5 & SUBSYS_815B104D & REV_023 & 267A616A & 0 & FD
  The drivers for this device are not installed.
  
  3. network controller PCI\VEN_1814 & DEV_0201 & SUBSYS_00321737 & REV_014 & 2E98101C & 0 & 50F0
  The drivers for this device are not installed.
  
  4. Modem PCI PCI VEN_8086 & DEV_24D6 & SUBSYS_8128104D & REV_023 & 267A616A & 0 & FE
  The drivers for this device are not installed.

  5 series  
  ROOT\LEGACY_SERIAL\0000
  This device is disabled.

  I have a Sony VAIO Modem Lite-on CNR model - 002 # / A18 and tries to pick up a signal from my router AirLink Wireless Lan and Port wide band a few feet skinny feet away.

  I've already lost most of the day diddling with half a dozen pilot search utilities that are imposed to the be me these sites with databases of driver. I managed to make no progress whatsoever other than to download several useless versions of .net software framework (required by these programs of research of sadistic driver update!

  My hardware should not be a problem because the system was functional in terms of access to the Internet only a few days ago.

  Can anyone offer suggestions that could help me solve this puzzle?

  RangerDude

  There is no LAN or wireless connections because the drivers are not installed for Ethernet controller and network controller.

  If your computer came with a disk of driver installation, use it to install the drivers.  If it does not, use a different computer to access the web site of your computer manufacturer and download Windows XP drivers for your computer model.   Then transfer them to your computer and install them.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Cisco UCS C210M2-VCD2 network connectivity

  Hello

  I will install three servers of c210M2 and I am quite new to the world of the UCS. According to the design that I'm supposed to install

  4 x Vm (CUCM, CUC, presence, UCCX) primary or Publisher on NGC 01

  4 x Vm (CUCM, CUC, presence, UCCX) subscribed or failover on NGC 02

  2 x Vm (MeetingPlace) on NGC 03

  I have a few switches access X 3750 for network connectivity. My question is how to configure the NICs on UCS Server or the network. According to my knowledge each server has cards NIC 2 x 10 giga and 1 x NIC integrated management. I'm confused how many NICs each VM will have and how to set up all these VMs NIC on 2 x card physical NETWORK by UCS. Any suggestions please.

  Kind regards

  Asif

  Asif,

  Nexus 1000 would be useful here, but if not an option and that you use standard vSwitch then both NICS should serve rising in a unique vSwitch for redundancy.

  Here are some suggestions of QoS that might help you too.

  Rredundant of the physical LAN interfaces are recommended

  One or two pairs of cluster NETWORK adapter for the CPU VM traffic. A pair just on C210 due to the low load per VM

  A pair of NIC (or dedicated team) for specific traffic VMware (mgmt, vMotion, VMware HA, etc.)

  SIDENOTE: Pair of grouping NIC can be divided through the motherboard and the PCIe card permitting the UCS C-series, protects against the failure of the PCIe card

  Once we know exactly asked what vSwitch using as the last post, we are able to locate more, but this is based on the standard use of vSwitch

  I hope this helps.

• Drops network connection randomly, error message in Event Viewer ' TCP/IP NetBIOS Helper service was successfully sent a stop command, error code: 0 x 40030011.

  Original title: network Drops randomly: the TCP/IP NetBIOS Helper service was successfully sent a stop control

  The given reason was: 0 x 40030011 [OS: network connectivity (planned)]

  I want a definitive answer for this! For some reason any that never seems to have been resolved. I'm on a Samsung qx410 computer J01 laptop with windows 7. The wireless adapter is an Intel Centrino Advanced - N 6250 AGN. I've tried making it so the adapters could not be disabled for reasons and basically all of the steps for this energy saving. I did everything with the drivers and software. In the event log, it has this event where he falls TCP/IP NetBIOS support apparently without reason? I then immediately lose my connection and it never seems to happen with the rhyme or reason. Any suggestions? It doesn't seem to be a hardware problem either. Where is microsoft on this topic? It seems to be a Windows 7 problem...

  Hello

  1 have had any changes made on the computer before the show?
  2. do you have a wired or wireless network connection?
  3. do you get an error message? If Yes, what is the full and exact error message?

  If you use try Method 1 of the Wi - Fi connection.

  Method 1:
  Disable authentication IEEE 802. 1 X.
  This problem can occur if authentication enable IEEE 802. 1 X for this network checkbox is enabled. If this box is checked, but there is no server to authenticate the connection is interrupted. If you turn on the wireless network connection, it disconnects again after a short period.

  To disable authentication IEEE 802. 1 X, follow these steps:
  (a) click Start, type ncpa.cpl, and then press enter.
  (b) with the right button of your wireless network connection and then click Properties.
  (c) click the wireless networks tab.
  (d) under preferred networks, click your wireless network, and then click Properties.
  (e) click on the tab authentication, click keyar authentication to enable IEEE 802. 1 X for this network check box, and then click OK twice.

  Method 2:
  Try the procedure described in the link to create a new network profile.
  Create or modify network profiles
  http://Windows.Microsoft.com/en-us/Windows7/create-or-modify-network-profiles

  Method 3:
  If the problem persists, you can try the procedure described in the link and check.

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 4:
  If the problem persists, you can try to reset the Internet Protocol.
  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357

  Method 5:
  If still the issue remains, control whether or not the service is set to automatic.

  (a) click Start and type services.msc in the search box.
  (b) search of the computer browser.
  (c) series the service to automatic.

  Steps to set the auto services

  a. Locate the service (computer browser)
  b. right-click on the service
  c. If the service is stopped , then Start the service
  d. Select Properties
  e. and in the Startup type , select Automatic.

  Hope this information is useful.

• Wireless network connection disconnects when you plug in the charger and the error message "no connection available or limited connectivity.

  Original title: wireless computer does not work when plugged in and load, why?

  have a laptop Windows 7 who had originally installed XP. I have not changed anything inside her, but suddenly one day any time, I have the unit plugged my Ethernet and wireless turns off. As soon as I unplug it, the computer note immediately that there is a wireless card and connects.

  
  

  The computer has never done this until two weeks ago. It works just fine when unplugged, but still once, as soon as I plug it in it disconnects and States they has "No connection available" or "limited connectivity". I started seriously annoyed because it's my main laptop and I must wait for it to load in order to do something with him for an extended period of time.
  The device information:

  > Ze2000 HP (Pavilion series)
  > Original OS: Windows XP Home Edition
  > RAM: 512 MB
  > 100 GB hard drive
  > AMD Turion 64 Mobile Technology ML-34
  ___________________________________________________________________________________________________
  I can provide information. No errors appear in the error log or event viewer and I made backups and reset 3 times in recent weeks.

  Hello

  I appreciate your efforts to solve the problem.

  This problem may occur corrupt or incompatible drivers, missing updates or because of incorrect network connection settings.

  Are you having the same problem when you use the configuration of a network connection?

  I suggest you to check if there is no wireless or mobile network\devices which can interfere with the wireless network and remove if there is.

  Method 1:
  I suggest you to download and install the latest network driver on the manufacturer's Web site and check if it helps.

  Check out the link:
  http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=442888&TaskID=135

  Method 2:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.

  
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab4&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 3:
  If the problem persists, I suggest you to check that your device is allowed to the computer.

  a. click on start and type Device Manager in the box start the search .

  b. open the Device Manager and expand network adapter.

  c. right-click on the network driver and click Properties.

  d. click the power management tab.

  e. uncheck all options.

  f. click OKand then click OK again.

  See the article and check if that helps.

  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-in/Windows-8/cant-connect-to-Internet

  
  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

   

• App Store network connection has been lost because

  MacBook air early 2015 El Capitan 10.11.6

  Regardless of the service providers network, firewall is turned off, I get "we couldn't complete your purchase. Network connection has been lost"message when I try to install any app from App Store.

  Any help appreciated.

  Try resetting the App Store and the deletion of Cookies.

  Reset       Taken from old Toad

• Sierra periodically drops network connection

  I installed Sierra last night.  For the third time today, I was told that I was not connected to the internet.  The first two times I have recycled my modem and returned.  This time, before that I did, the system which I would put in sleep after that I lost the internet, woke up spontaneously and I was connected. And now, the same thing that happened to me last night also happens to know that after you put the system to sleep, in a few seconds, he wakes up immediately without doing me anything. (Which had itself set last night, but now it is again).  No doubt these two are related?

  No idea what is happening and how to solve this problem, so it doesn't continue to occur?  Thank you.

  Tonight after the system into sleep, I woke it and again, for the fourth time today, I have had no network connection.  I waited a while and was connected again. So I think that there is something of how Sierra handles sleep taking offline or something similar.  I always hope that someone here can help with advice about what to do to fix this problem.  Thank you.