Series HP laserjet 4050 N PCL5: laserjet "in an error state.

Similar Questions

• LaserJet 4000 TN: The printer HP Laserjet 4000 Series PCL5: error state & quot; message & quot;

  I sent the following message to Microsoft after a ' update:

  I have a printer HP Laserjet 4000 Series PCL5 TN which worked beautifully "black only" for many years. A recent update (Windows 10:12 / 22/15) seemed to put the printer in the "printer error state", when you try to print a simple document. It has been my default printer for a long time. I followed the suggestions of printer "windows 10", that is, unplug and plug - check cable (not USB) connections, remove the printer from the list of print devices /, reinstall drivers HP for Windows 10 (following suggestions from HP on HP site) - nothing seems to work. It has a network cable connection, but it is directly connected to my computer, no other computers are connected. See screen capture below. I even did a "recovery" of before 12/22! Any suggestions? Thank you. GM

  I received instructions from Microsoft:

  You run the printer Troubleshooter and identify the cause?

  If this isn't the case, we will do that by visiting the link below and see if it helps.

  http://Windows.Microsoft.com/en-us/Windows-10/fix-printer-problems

  Check also the update (KB number) has recently been installed on your computer.

  You can also restore printer drivers and check.

  To restore the driver, you can follow the steps below:

  • Press Windows + R on the desktop screen.
  • Type devmgmt.msc and press ENTER.
  • Expand the printer drivers and do a right-click on the driver and select Properties.
  • Go to the driver tab and click driver RollBack.

  Can I assume that you use a parallel cable to connect the printer to the computer.  If you do this is a known problem that can be solved.  Go to Device Manager and then click ports.  Double-click the lpt for the printer port, and then click on device settings at the top.  Change the default setting of the middle box checked in the box below to use any available interruption. I would also check the legacy down.  If necessary, turn the computer off and then turn it back on, but most of the time this solves the problem without a reboot.

• HP laserjet 2055dn B0605 error

  HP laserjet 2055dn B0605 error, I need solutions for this error I tried with the site, but it does not work.

  @Abhitech,

  Please refer to this document to help troubleshoot the problem you on the error message with this printer...

  HP LaserJet P2050 Printer Series - error B0601, B0602, B0603, B0604 or B0605 POPs during initialization of the printer

• LaserJet 100 MP175nw: Error 49

  I recently changed my Airport Time Capsule (newer model) and changed the name of my network. Now, I'm trying to print from my MacPro and the printer gives me an error 49 non-stop. I checked the responses in the communities of HP forum and none seem to work. I even tried to apdate the firmware through Windows 8.1 (running on my MacPro by Fusion) and I can't always help. Help, please.

  Hello @ljpell,

  Welcome to the Forums of HP Support!

  I understand that since the update of your airport Time Capsule and change the SSID of your network, your HP LaserJet Pro 100 color MFP M175nw is in an error state 'error 49'. I would like to help you today to solve this error state. Thanks for the troubleshooting steps you have already tried before reaching out for support, including. Now, just so that you know, 49 error messages can occur because if a conflict with the configuration of printers and the environment, or a problem with the copy or scan commands sent by the computer (Source). Because the 49 error message appeared after changing the name of your network and your airport Time Capsule update, I believe that the error message 49 on your printer is due to a conflict within the configuration of printers (environment). Therefore, I will pass you some troubleshooting steps to reconfigure the network connection on your device in order to have a nice clean slate to work with. Please follow the steps below.

  Step 1: Restore default network:

  1. Turn your printer OFF
  2. Please disconnect the power supply for your Time Capsule airport
  3. With the power cord unplugged, please turn ON your printer
  4. Your printer "should" come "ready" mode
  5. Press Setup (the key) on the front panel of your printer
  6. Arrow in the network Setup Menu on the right and click OK
  7. To restore the default settings right arrow
  8. Select OK to restore default values
  9. Once the default network settings have been restored, please reconnect your airport

  Your printer must remain in the normal state of "ready" now that he is no longer connected to the network. Can I please have you move to the next step.

  Step 2: Reset the printing system:

  To begin, I will have you reset the printing system on your Mac because it is important that we have a pleasure to work with for troubleshooting clean slate. Please click herefor instructions on how to perform the reset. When the site opens, follow the steps under "Reset printing in OS X Lion system." This Reset deletes each printer on your Mac. However, it does not uninstall printers. Therefore, if use you other printers on the Mac, once the reset is complete simply make sure printers are attached via a USB cable or connected network and (+) add hide them po do add not your HP Laserjet back in right now.

  Once the reset is complete, proceed to the next step.

  Step 3: Uninstall the drivers and software:

  Please click here to find out how to properly uninstall your printer. Once the site opens select the drop down menu 'Mac OS X v10.6, OS X v10.7, OS X v10.8 and OS X v10.9' and follow the steps to complete uninstallation.

  Once the uninstall is complete, please continue on.

  Step 4: Check and repair your Mac disk permissions:

  1. Open Macintosh HD and go to Applications
  2. Go to the Utilities folder
  3. Open disk utility
  4. Select the hard disk volume, you use (usually on the left)
  5. Select verify disk permissions
  6. Once this process is complete, select repair disk permissions

  Step 5: Check the Apple updates: 

  1. Go to the Apple
  2. Select System Preferences
  3. Select software update
  4. Click update now
  5. Install your available updates
  6. Computer restart

  Step 6: Reinstall your software and drivers: 

  1. Please click here to download the latest drivers for your HP Laserjet Printer
  2. Once the site opens, click on the download button at the top left
  3. Once the download is complete, follow the instructions on the screen to reinstall your printer
  4. When you are prompted, choose who you want to configure your printer for a wireless connection
  5. Connect the USB cable when prompted by the installer
  6. Wireless now reconfigure your printer for the new airport and network name
  7. Once the wireless has been reconfigured with success on your printer, you will be able to disconnect the USB cable

  -Source: Set up the printer for a wireless network connection

  Once your printer is properly reinstalled via your wireless network please test printing to verify that the problem is now resolved.

  Please reply to this message with the result of your troubleshooting. Good luck!

• How to fix "Printer error state" when I try to print to the HP Laserjet 3030?

  Have not been able to find information on why my HP LaserJet 3030 printer cannot be used with the new computer from Samsung in Windows 8.  I chose driver for printer, but receive error messages - "Printer error state" or "Cannot find the output device" - when I try to print.  What can I do to fix this?

  Unplug the printer for PC > uninstall all printer drivers > restart PC > down load & install the correct driver from the HP Web site > reconnect and turn on printer:

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=378058&TaskID=135&cc=us&lang=en&prodSeriesId=378056&prodTypeId=18972

• 79 Service error on Printer series color LaserJet Pro 200 M251

  I use this printer with the operating system Mac OSX 10.9.4 for about 9 months.

  Now, I get an error message from the Service 79. I tried to turn off the printer and the several times without success.

  Curiously, when I try to print a document, a message keeps appearing on my computer that says "the printer has been suspended. You want to resume printing? "When I click on the button resume, nothing prints.

  The manual States that the 79 Service error message is related to a firmware issue? Do you know how I can fix this problem?

  Thank you very much

  Stone

  Hi NebraskaPierre,

  By your post, I see that you have found a Service 79 error on the printer. I can help you.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  This can be caused by malformed PostScript documents.

  Follow these steps:

  Locate the power switch on the bottom of the printer.
  Turn the printer off position and COUNT to 10.
  Turn on the printer and the system should be all together.

  Try printing from another application to see if you have the same problem.
  
  If a print job from your hand repeatedly causes this error, this may indicate a problem with the print job.

  Try to split your document upward more before they print it.

  Fix permissions of the drive on the Mac:

• M600 series printers LaserJet Enterprise (601) with custom tray (cb527a)

  I have a custom of paper (4.13 "x 8.5") piece that allows to print fine from Tray 1.

  I bought custom support tray (cb527a) because the data sheet says it can print dimensions of 102 ~ 105 mm to 170 mm to 140 mm to 282 mm.

  I succumbed in a sheet 4.13 "x 8.5" feel of this custom tray (tray 2).  The printer is confused when I put in place the guides in the positions for this odd size (it is in portrait, not different from Tray 1 mode). He seems to think that the sizing is 6.69 "x article 11.1".

  This custom media tray can take all kinds of sizes ISO and the currents ranging from 3 x 5 to 5 x 8 card formats... It seems especially excessive zeal for a product labeled as 'company' in order to avoid paper sizes custom when the dimensions are within its range of specifications...

  If you have this job, it would be a great help if you can lend your expertise to me.   I tried to configure the status bar of the console device and through the administration of the web... the HP Universal PS driver doesn't seem to offer any help either...

  .. I found the answer...

  Unfortunately, the manual (HP doc: c02677203) has crushed my dreams on the 73/74 Page.

  Short version, it is not possible to print my document 4.25 "x 8.5" via media in tray 2 tray.  The minimum size for tray 2 is 5.83 "x 8,27".  So very disappointed for a product labeled as "business".

• LaserJet M1132 MFP: Error E3 on M1132 MFP

  Hello

  Please help, I get the error E3 despite the fact that I've changed the cartridge, made sure that all packages are cleaner, cleaned the iner part of paper, disconnected and reconnected several times.

  is there a way to reset?

  Thank you

  I beg of you. Where E3 is an indication of a paper jam (could make sense given the noises your description), try the procedure described here: remove a paper jam for HP LaserJet Pro M1130 and LaserJet Pro M1210 Multifunction Printer Series.

  If the problem persist, it would be better for you to call us.

  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  
  File number and phone number are displayed.

• LaserJet 3020 upgrade error

  My Laserjet 3020 does not at all. A message is displayed on Didital sign indicating "UPGRADE ERROR, CALL HP HELP DESK".

  Please advice how ractify it.

  Alharamain wrote:

  I don't have. Since I do not know any number of support HP in Karachi centre.

  Try this:
  http://www.romakhi.com/

  Computers of Roma was created in 1988 and 20 years computer Roma has itself in magnates Macho in World.Roma a computer is authorized dealer of Hewlett Packard (H.P.).

  http://www.romakhi.com/contactus.html
  

• LASERJET 1300: fatal error in laserjet 1300

  I bought a 'new' in the Laserjet 1300 to a thrift store box when I turn it on it shows "ready" light, works, all gears seem to be turning, doing this for about 1 minute, then stops and shows fatal error, turn off and turn back on, same thing, any help?  error fatal high school talking about the engine, the engine turns during the minute before the error.

  This is the engine error but it could be the motherboard, but all first I remove the cover and make sure that the Ribbon connector going to the laser/scanner Assembly is in place.  I know that the laser/scanner cable can give the defective engine error.  You will also want to check the other wire that goes to the laser/scanner Assembly to ensure that it is correctly connected at both ends.  It is also possible that the formatter is bad.

• LaserJet MFP M127 Pro: LaserJet MFP M127 error message and don't scan Pro

  Relatively new LaserJet M127 gives me a "charging document" error message when you try to copy something that is clearly on the glass.  I tried to scan a document and it also gave me a message to load paper when I already had a loaded document.  It is fine impression of the MacBook, but will not copy.  He stopped abruptly.  I copied it several times before.  Any suggestions?

  Thank YOU, rb011... it worked.

• LaserJet P2055dn Setup error

  When installing, I get the error message stating:

  "This software cannot be installed using the command" run as... " ». The installation cannot continue until this is resolved. »

  I am the only administrator of the computer and the only other account. I would like to set up the printer via a network connection. Thank you very much for the help.

  WIV,

  I don't know what process the OS you use so I tried installing on a 64-bit win7. When I downloaded the software of complete solution by default it when right on a Setup screen where I can choose the easy installation or advance of Setup options. I chose the installation easy and let it run and install as usual. If you encounter another, could you explain further, and I will try to help you through it.

  I have you linked to some documents that could be useful and a few screenshots that should help you through this. I also gave you the link to the page of the product that has the driver of the complete solution. You will want to choose the HP LaserJet P2050 post-Euro PCL6 Default Install.

  2055 d Page product - choose this option: HP LaserJet P2050 post-Euro PCL6 Default Install

  Install a driver full features or complete solution on a Windows 7 OS (32-bit and 64-bit) using a USB

  Install a driver full features or the complete solution on a Windows 7 OS (32-bit and 64-bit) through a network

  If you still need help, please post here and let me know what your specific problem.

  Thank you.

• When you try to install the HP Laserjet 1300 printer error there is a problem installing this hardware.

  Original title: HP Laserjet 1300 Windows XP, SP3 error installation

  When you try to install the HP Laserjet 1300 printer, I get the following error message and the process stops and restores.

  CANNOT INSTALL THIS HARDWARE

  There was a problem installing this hardware

  HP Laserjet 1300 PCL 6

  An error occurred during the installation of the device.

  The specified Module could not be found.

  I have used the original printer installation cd, bought a new cd from HP and downloaded the drivers directly from the HP Web site and I get the same error.  The record show error install printer on each attempt of events. Can anyone help?  Thank you

  Hello

  You are able to install other programs?

   

  Method 1: See the following article:

   

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02073861&LC=en&cc=us&product=3795406

   

  Method 2: view the following steps and see if that helps.

  (a) disconnect the printer

  (b) uninstall the software and drivers on the computer

  (c) plug the printer back

  (d) allow the Hardware Wizard search for drivers

  e) if it does not, it asks you to install the source for the drivers, the installation driver CD and install the drivers and see if that helps.

• Color LASERJET CP1025nw - Fuser error

  I get a 'Fixer' error when I print on my printer Laserjet CP1025nw.  I have powerd extinguish by instructions and left HP it goes off and unplugged during the minutes 25 + recommended, but nothing works.  There is a triangle with one! the control panel and I'm sure that has to go.

  Any thoughts?

  Thank you!!! \

  Steveoh

  I found the solution on another forum HP.  The guy said to replace the black toner cartridge and it worked!  He said that it had removed all the toner cartridges and put them back in, but no luck.  Changing the black cartridge has worked for me and him!  My printer is less than a year and I have probably put 2 reams of paper through it, so I'm happy that it worked!

  steveoh

• LaserJet 4000 printing error with USB/parallel interface and DATA light on at all TIMES

  Laptop Dell Vostro 3700, Windows 7/32, Laserjet 4000, connected via the USB interface cable / parallel on USB001. Interface drivers and printer installed automatically after starting the update of Windows PC.

  Single document print OK.

  Document of several pages: printer data LED flashes then REMAINS ON permanently. Printed front page sometimes, sometimes not.

  After some time, box status Control Panel/print poster printer fault and a yellow exclamation point appears on the printer icon.

  No possible mistake OK with MS print Fixit. No other printing possible before initialization of the PC and then to new as shown above.

  Same printer connected via a parallel cable that is normal for old PC Windows 2000 print OK.

  Help, please!

  SOLUTION FOUND!

  A SOLUTION THAT WORKS: add only DC powered USB hub and connect the printer to one of the ports of the hub-s. Let Windows install the drivers for the USB cable and printer and printing is perfect!

  It is that the laptop USB ports do not have enough current or voltage, especially if some other USB devices are connected to the laptop...