Series HP Officejet 6110

Can a series HP Officejet 6110 be installed in a wired environment with multiple users?

Hi Chica2000,

Your OJ 6110 is a single USB printer.  It can be used with multiple users by having a computer on the network to the rest of the network printer share.  So that other computers to print, the computer sharing the printer must be turned on.

What version of Windows to do this?  It would work better if connect you the printer to a computer with Windows 7 and then other older versions could use it again.  It may not work as well the reverse.

Tags: HP Printers

Similar Questions

  • HP Officejet 6110 printer does not print correctly

    Original title: my HP Officejet 6110 printer

    My HP Officejet 6110 has started smearing it prints, I changed the cartridge has a new HP 56 and that it has not cured the problem. Any suggestions?

    Hi ccadkins,
     
    Try the steps listed in the article given below to resolve this issue.
     
     
    If this is not enough, post your request in The Forums HP's Support for assistance.
  • Can't find model number, installation instructions for the unit duplex for printer all-in-one Officejet 6110

    MY friend gave me a duplex unit to another printer 6100 series he had. We thought that it would be compatible. The HP site says that my all-in-one OfficeJet 6110 can use a duplexer, but that's all he says: no model number and no installation instruction.  Does anyone have any info or suggestions? I can't know just by looking at my printer.  (The duplexer No. FPU is C9101A).

    Thank you!

    To install the duplexer, you must remove the rear blankpanel of your OJ 6110.  The rear panel will be approximately 9 "wide and 4" high with two s tab that can be moved together in the output panel.  Snap the duplexer in place once it is removed.  Make sure that it is oriented correctly, the label must be on the bottom.  Use large buttons on the ends of the duplex unit to release the duplexer if it is to be removed or moved.

    With the duplex unit installed, you will need to configure it so that it is recognized by the driver.  See the post here for more information on activation of the duplexer.

  • Slow printing Officejet 6110

    My very old (8 years) 6110 All In One works well until about two days ago. He started very slow printing, about 5-10 min. per page. It prints at the same speed in all modes. It prints slow even on a test in the menu printer page. I read in the forum that a bad print cartridge can cause this problem. When I turned on the printer this evening, there was an error code that says "remove and check print cartridge". I cleaned the contacts on the cartridge, but nothing has changed. I have no spare cartridges to change. I can not clear the error code to try a test page. I tried all the advice I found on the forum, but no luck. Are there other things I can try? A new series of cartridges will cost me about $60.00. I can buy a 6500 new for $80.00, or a 8500 for $110.00. It is better to waste any more time on it, or it's time to replace the old printer?

    Thank you, BFK

    This is caused by the failure of one of your cartridges. I don't remember if the Officejet 6110 print reserve mode, but try the following: remove the black print cartridge and print a test page.  The printer prints at a normal speed?  Is therefore the black cartridge was the issue and needs to be replaced.  If it isn't then, put the black back cartridge in and remove the color cartridge and the test page printed.  If the printer now prints speed the color cartridge is responsible and must be replaced.

    Print you a lot?  The 6500 and 8500 have a reservoir of ink separated and the print head.  They are more suitable for frequent printing.  If you are printing only occasionally the Officejet 6110 can be a better choice because it has less overhead for maintenance.

    If the printer will not print with a removed cartridge then I would replace the cartridge black with a #27, available for $20.  If this does not resolve the problem, you can try the color cartridge #28, on $26.

  • Vista OfficeJet 6110 do not print black cartridge only (I always get color)

    I can't get my Vista with OfficeJet 6110 to print black cartridge only, that is, I always get COLORS in my impression.

    NOTE: I have the BLUE text in my .odt file and I want to print with just the black cartridge but alaways get BLUE to the exit...

    I hope Bob Headrick reads this...

    What printer driver settings that you use?    I can't install the Officejet 6110 driver, but I tried the following with the Deskjet 6500 driver: in the tab 'Printing shortcuts' select ' Fast/economical printing' in the 'what do you do?"tab.  IN the "Choice of colors" drop-down list select low "on Black Print Cartrdige Only", then apply. For good measure, go to the Advanced tab and enable "text just like Print black" in the tab "Printer features", then apply, OK.

    A similar procedure should give good results with the Officejet 6110.  If this isn't the case, you could install the Deskjet 6500 driver by going to add printer, select local printer, select the USB port the 6110 is on and then select the driver HP Deskjet 6500 Series.  You might have the DEskjet 6500 and Officejet 6110 drivers installed at the same time, they should not come into conflict.

    Kind regards

    Bob Headrick, MS MVP printing/imaging

  • HP Officejet 6110 - grayout duplex option.

    Hi, I hope you can answer to my problem. I have Windows 7 64-Bit. My HP Officejet 6110 has a duplexer installed. What I found a problem that I can not print on both sides. I checked the properties of the printer and found under Installable Options, duplex unit are grayout. I can not set to "installed".

    Everything you can activate it?

    Francis

    I'm sorry. It does not work. In fact, you are in error. I just thought of it. On Windws 7 system. They have a little change with the properties of the printer with confused. What to do to enable the duplex unit:

    Click Start

    Click on devices and printers

    Right-click on the Officejet 6110

    Click on printer properties

    At this point, he showed window "hp officejet 6100 series properties ' where you asked to change him. but it does not work due to the almost options are grayed out. What I do is:

    Click the button change the properties (below and left, with the shield icon).

    That you clicked on it, it displays EVEN VERY "hp officejet 6100 series properties ' window EXECPT the 'Edit properties' button disappeared.

    Click device settings

    You can change all the options is more grayout I changed the duplex option of 'Not installed' in 'Install' and it is capable of printing on both sides.

    Duh!

    Francis

  • When I turn my on my HP Officejet 6110 all in one, it makes noises like a rattling of the belt.

    When I turn my on my HP Officejet 6110 all in one, it makes noises like a rattling of the belt.

    [Moved from comments]

    Check with HP tech support to see what your options are.  This is not a Microsoft or issue of Windows.

  • Mistake1 right incorrect cartridge in Officejet 6110

    Original title: officejet 6110

    How can mistake1 right cartridge incorrect I fix it

    Hi EricHarold,

    You can check the support of HP at following link and check if it helps.

    Mistakes print cartridge

    If you are always faced with the question, then you must contact the HP support for further assistance.

    Contact HP

    Hope this information is useful.

  • where can I find drivers update for hp officejet 6110

    I work with windows xp and I need to update my printer drivers for hp officejet 6110 all in one

    Hello

    As OEM HP is responsible for the good operation of the printer and their
    drivers provided. Check with HP support, their documentation online and
    drivers and ask in their forums.

    HP - Printer all-in-one OfficeJet 6110<- set="" for="" your="" version="" of="">
    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=79477&LC=en&cc=us&DLC=en&lang=en&cc=us

    HP - OfficeJet 6110 all-in-one printer - Product Support and troubleshooting
    http://h10025.www1.HP.com/ewfrf/wc/product?product=79477&LC=en&cc=us&DLC=en&lang=en&cc=us

    Support HP & drivers
    http://welcome.HP.com/country/us/en/support.html

    Contact HP
    http://welcome.HP.com/country/us/en/contact_us.html

    HP forums
    http://h30434.www3.HP.com/PSG/

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • OfficeJet 6110 Windows 8.1 compatibility

    After upgrading my ro PC Windows 8.1 Overview Pro, print my 6110 OffcieJet function has stopped working.

    Is there a new driver for Windows 8.1?

    Hi mhbar1,

    I can't wait to hear that you have questions.  Unfortunately, given that this operating system is still in testing and has not released a new driver has not been released.  However, for this device, the drivers for Windows 8 and beyond are in-OS only.  Simply, we should be able to update or delete and add version 8.1 to recover printing features.  Please see the steps below that can solve the problem.  If you want to learn more about your product, click here.

    Update driver again:

    1. click on print and record device

    2. right click on the printer icon

    3. Select Print Properties

    4. click on the Advanced tab

    5. click on new driver, next to the driver with the name in block letters

    6. the add driver Wizard window opens

    7. Select HP under manufacturer, then select the Officejet 6110 in the list of printers

    8. click on next

    9. click on finish

    10. click on apply

    11. click on OK

    Delete and add the driver:

    1. remove the device

    2. turn on the printer and the computer

    3. connect the USB cable for printer

    4. connect the USB cable to the computer

    5. computer will install the most recent drivers in OS

    I hope this helps!

  • Scanning continues to not work for Mac OS 10.6 and 10.7 for all-in-one printer, HP Officejet 6110

    Scanning is broken in Mac OS 10.6 or 10.7 for all-in-one printer, HP Officejet 6110. It seems that only old versions of Mac OS will scan. I realize than products account "age" but it's really - poor behavior that HP and Apple cannot support such a function based on a very popular printer.

    Information on scanning support is circular at best and misleading at worst. A Bulletin Board suggests the purchase of a third party program to do the scanning 'work' for the Mac. Terrible.

    There should be a patch for it. It is really unacceptable and tarnishes the reputation of Hewlett-Packard and Apple.

    (Forgive me if this sounds like a sales pitch, it is not intended to be, and I'm not in the sale by any means - it's just the logical thinking process, I would in your situation).

    Option 1: Get Vuescan

    Pro - you can scan... as long as the printer is working.
    Con - given that electronic devices are usually only expected to last 5 years or more, your 6110 could go at any time, hence the need to upgrade. Improved printer support the most recent OS and the need of Vuescan would go, resulting in a loss of $40.

    Option 2 - upgrade
    Pro - new product will be compatible current OS with a complete solution, have more physical features than your current product and a warranty.
    Con - it's pocket money-, but looking at the Con in Option 1, you could potentially spend AND pay $40 for additional software, so in the grand scheme of things, it would be the least expensive option and best bang for the buck.

    These are my thoughts on this subject, take them for what they are worth. Whatever you decide, I hope everything is working well for you and happy that you have found an alternative solution (always nice to have more options)

  • can I use the same USB cable for two printers - HP Officejet 4315 and HP Officejet 6110?

    I have an existing HP Officejet 4315 with USB cable and want to use the same cable replacement for my other printers, the HP Officejet 6110.  This allows me to change the cable between the printer and still work?

    Thank you for your thoughtful replies.

    As you asked specifically about the compatibility of the USB cable, I would say that it will work because both devices support USB 2.0 (that is, both devices can be used with the same USB cable alternating).

    Installation of the software for the two devices must be made successfully to use various functions.

  • Win7 x 64 native driver for the OfficeJet 6110 does not recognize the element of automatic duplex unit add-on unit

    After upgrading my laptop Lenovo T61 to Windows 7 x 64, I find that my OfficeJet 6110 unit automatic duplexer is not recognized.  The duplexer has worked flawlessly for 3 years under Windows XP, but apparently he is not recognized with Win7 x 64 native driver.  The auto duplexer unit is a standard HP brand option for this printer.

    The printer is connected to a USB hub, which is connected to my laptop.  The duplexer works fine when reconnected to a XP operating system with the pack of HP software/driver installed.

    Y at - it a trick to make the add-on unit unit duplex automatic, recognized and functional element in Win7?

    Thank you!

    Hello
    Enter the control panel > devices and printers.
    Right-click the printer icon, and then click printer properties.
    Click the device settings tab.
    As installed in Duplex Automatic Two-Sided accessory and then click OK to save the change.

    Automatic duplex printing should now available.

    Kind regards
    Shlomi

  • How to install printer HP Officejet 6110 in Windows XP Mode?

    Original title: HP Officejet 6110 Director will not correctly installed in XP Mode (under Win 7 Pro)

    Director HP Officejet 6110 has installed without problems on several XP machines (even if with IE7, it requires a work around).  It does not usefully install in XP Mode (under Win 7 Pro).  Instead, all of the useful features have disappeared.  Is there a way to operate or is XP Mode completely useless for me?

    In addition, I used the old Win 3.1 (16 bit) Tetris with XP, but in XP Mode, the screen is ugly and distorted, and it is capricious, jerky and useless.  Any hope for here?

    Hello

    Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro Technet public. Please post your question in the Windows Virtual PC and XP Mode forum.

    Windows Virtual PC and XP Mode:
    http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threads

    Kind regards.

  • Printer series HP Officejet 6500e709n

    My printer keeps givng even msg of error on a plus. I installed my ink cartridges and it it keeps saying (black) are damaged or not installed properly. I installed it again and again and again... its not damaged. This is not the first time, he did.  before, I kept stirring and install and it works finally. It; series s e709n a HP Officejet 6500. HPD 18846.  Can someone please tell me what to try next

    I'm sorry that you are having this problem. Here is a link to a document for your printer model that addresses the error message that receive you, and troubleshooting steps to try and help you solve your problem.  It will guide you in how to do a manual cleaning of the contacts and the cartridges.  I hope this helps.

Maybe you are looking for

  • ThinkPad Tablet 2

    Lenovo ThinkPad tablet 2 does support Linux? Fedora running on it would be cool.

  • Where can I find PXI - 6123 registry definitions based on records of communication?

    Well, the subject line tells it, I hope. I need to write a driver for the PXI-6123. I prefer a VISA driver because our data acquisition application is written in Java. I have already created a wrapper for Open Source Java VISA that can be found at jv

  • Sony Vaio - Tuner Hardware - VGC-LS30 series

    My computer crashed and had to be replaced the hard drive. When I took my computer to the repair shop, everything worked as before except for the TV. When I try to put up to the TV is not said: 'NO TV Tuner hardware detected. Is there something avail

  • BlackBerry Smartphones Synch with Desktop Manager

    Lately, I was able to sync my Pearl with my office. It starts well, but a few times during synchronization, usually when to synchronize the calendar, I get an error message that says: Error has occurred. 0x83e90003 error code. See the Documentation.

  • The AMX control and information Integrator

    Hello On the old site Tandberg.com there is information and software concerning software integrator like AMX and Crestron modules. And there was the software to control the audio and video processor in the C40 - C60 - codec C90. Where is the informat