The AMX control and information Integrator

Similar Questions

• I tried to set the parental control and received this message: because this computer is connected to a domain, Parental controls are not available.

  I have the internet Charter.  I am a home user.  I tried to set the parental control and received this message: because this computer is connected to a domain, Parental controls are not available.  Again, I am a home user.  What does that mean?

  Hello

  1. which user account you are using for Parental control (Please note that you cannot apply parental controls on a user admin account? It can be applied to standard user only accounts)?

  2 have you made changes on the computer before this problem?

  I ask through the following article to find out how to set up Parental controls:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/parental-controls

  http://Windows.Microsoft.com/en-us/Windows7/set-up-parental-controls

  After completing the above links persist issue please fallow the mentioned below of the methods.

  Method 1: Disable UAC (User Account Control) and check the result
  See http://Windows.Microsoft.com/en-us/Windows7/how-do-I-change-the-behavior-of-user-account-control-by-using-the-slider

  Note: You must restart your computer when you enable or disable UAC. Change levels of notification does not require that you restart your computer.

  Important: Enable UAC after you complete the steps.

  Method 2: If the problem persists, try to set the parental control in safe mode and check the result. If you are able to apply settings in safe mode, this means that some program is causing this problem, mainly the security software.
  See http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode  

  Hope the above information is helpful.

• In Photos, I changed the date, title and information on the location of the images of a slide digitizing company.  I want to preserve the custom metadata and the original resolution of 2500 dpi in a file backup, but when I export it loses my metadata chan

  Using version 1.3 of Photos, I edited the metadata about the images, I received a business of digitization of slides to insert the first day of the slide, the location, a title and a keyword.  I want to archive these images with the original resolution of 2500 dpi, but when I export original unmodified, it does not preserve information.  When I export by choosing export as XMP IPTC, I can't read the XMP file to see if there are my revisions.

  When I export using the 'Export # photo (s)' choice, I can use the previews/tools/Inspector/iptc and see my changes.  But this photo has only 72 dpi.

  Is there a way to preserve this modification of metadata information in the original not modified?  Alternatively, this file has XMP I exported the info?  If so, how can I read it?  And that would mean I need to export both the original unmodified and the XMP file to my files from archive?

  Don't know what you want - well there is a CIO field in the EXIF fields it is meaningless as DPI is not a setting but the result of a math problem third grade - points by (divided by) inches until you add inches per impression you have no IPR - and when you add inches the DPI for printing are determined by calculating not by any setting

  For more information, see http://www.rideau-info.com/photos/mythdpi.html

  A 1200 x 1800 pixels picture printed as a 4'x 6' printing is 300 DPI bit matter what setting the EXIF says

  LN

• Network configuration and the Parental control and Powerline wireless Extender

  I'm looking at one of them to help to get wifi in my addiction.

  I need this on the same 'network' as my Nighthawk AC1750 router because I use it with wireless security cameras.

  Two questions about wifi created from extender by current holder:

  1. can I configure wifi with the same name and password powerline network is the 'same' as the network from the router?

  2. the standard OpenDNS parental control on the Nighthawk router will work when connected to wifi extender Cpl?

  zr8000 wrote:

  I'm looking at one of them to help to get wifi in my addiction.

  I need this on the same 'network' as my Nighthawk AC1750 router because I use it with wireless security cameras.

  Two questions about wifi created from extender by current holder:

  1. can I configure wifi with the same name and password powerline network is the 'same' as the network from the router?

  Yes.

  2. the standard OpenDNS parental control on the Nighthawk router will work when connected to wifi extender Cpl?

  Yes, your Nighthawk will still work as the DHCP server for the network and, therefore, point devices on the OpenDNS servers.

• Function of memory in the loop control and Simulation - problem of the ODE Solver

  Hello

  I'm correctly using the control loop & simulation to simulate the behavior of what is essentially a shock absorber-spring-mass system. In the process of change in time (dt) is used to integrate an arbitrary value. I use a rack depending on memory to store the time, to calculate the change of time (dt).

  The simulation is quite complex, because of the precision required, not all the ODE solvers can all support. Currently I use the Adams-Moulton method, this works very well for the simulation. However, it cannot detect the change in time, the change is constantly zero. This problem has auto market by using an another ODE Solver, but then the simulation has been messed up instead (even when I listen to the step sizes and tolerances). So I'm pretty confident that Adams-Moulton is one of solver ODE best suited to the problem at hand.

  Is there another way to store the previous hour and use it calculate lag, that the use of the memory function? Everyone knows about these problems before?

  I did a lot of research of error using the probe, but I'm sure that there is a problem with the ODE Solver and memory function. See the image below, showing basic how is calculated the change in time.

  I'm pretty new to LabVIEW, so if there is something else I missed I would be happy to hear it.

  PS! I set the tolerance minimum step of size/relative and absolute for the Adams-Moulton to simulate the behavior of the system properly.

  Problem solved!

  It turns out that the ODE Solver has struggled because of two "table 2D find" used functions. This was created for the interpolation/extrapolation, which caused a problem constantly and the ODE Solver could not resolve correctly, so the functions of memory doesn't work does not correctly or the other.

  By increasing the table manually, I could use closest method instead, with also good results as interpolation.

• The parental control and administrator capacity display

  Can I view dialogues of my son on AIM or IMs on Facebook?

  Hello

  See this and the 'related links '.

  How to install and use Parental controls in Vista
  http://www.Vistax64.com/tutorials/95139-parental-controls-Setup-use.html

  and these:

  Setting up Windows Vista's Parental control
  http://www.bleepingcomputer.com/tutorials/tutorial139.html

  Set up Parental controls
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-parental-controls

  ---------------------------------------------

  It is a software of supervision which would record everything as the type of children.

  Reviews of PC - Mag - Parental control and monitoring
  http://www.PCMag.com/Category2/0, 2806,1639158,00.asp How to buy Parental control software
  http://www.PCMag.com/Article2/0, 2817,2346997,00.asp

  See also sponsored links and downloads here
  http://www.PCWorld.com/search?Qt=parental+controls

  Google search
  http://www.google.com/search?hl=en&source=HP&q=Parental+Control+Software&aq=f&OQ=&aqi=

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Remote Desktop - conflict between the remote control and the host user?

  We set up Microsoft Remote Desktop on a Mac with a remote computer that is running Windows 7 Professional.

  What happens when:

  1. the remote user tries to connect to the Windows host computer while someone is working on it?

  2. a person is trying to work on the host computer, and the remote user is logged?

  Is the second locked user, is there a warning of the conflict, or is there another way that Remote Desktop manage such a conflict?

  DRM for any assistance you can provide.

  Stuart A. Forsyth

  E-mail address is removed from the privacy *.

  Hi Stuart,

  Thanks for posting your question on the forum of the Microsoft community.

  The question will be better suited to the audience of professionals on the TechNet forums.

  I would recommend posting your query in the TechNet forums.
   
  TechNet Forum
  http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  For reference:
  http://Windows.Microsoft.com/en-us/Windows/Remote-Desktop-connection-FAQ#1TC=Windows-7

  Thank you

• I set up the new user on my MacBook Pro with the parental control, and I want to allow access to Word, Excel, PowerPoint for Mac.  I have those checked in the dialog box list, but they may not appear in its applications. Am I missing something?

  I set up a 'user' for my son and use parental controls.  I want to him to have access to Word for Mac, and it appears in the list of applications I can check to allow use for.  However, when we opened a session under his username, these applications do not seem to be anywhere.  When you configure new users, applications such as Word for Mac or the available Pages on users?  I can't find any information to help in this regard.  I don't know if I'm missing something under user put up, or parental controls, or both.  Any help would be greatly appreciated!

  These requests should be made available, provided you installed then in the folder/applications, not in a private folder ~/Applications for a specific user.

• How to change the parental control and I'm invited to the pw on each Web page

  The URL says "content advisor" but how to get to it and that I would like to make the necessary adjustments?

  Hello Texas Girl,

  I've added a few links below, based on the Windows operating system.  I hope this helps, please let us know status.

  Control parental Windows XP:

  http://www.Windows-Help-Central.com/parental-controls-in-Windows-XP.html

  Vista/Windows 7:

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-parental-controls

  In addition,

  http://Windows.Microsoft.com/en-us/Windows7/products/features/parental-controls

  http://Windows.Microsoft.com/en-us/Windows7/what-can-I-control-with-parental-controls

• The quality control and 6.2. Seriously - I can't deliver to my client.

  I really can't believe that with these CRUCIAL questions: crash on export and engaging questions for Nikon, that he had been released.

  They don't think to test properly with El Capitan first? Who is responsible?

  Maintain massive offering images to my client. My life depends on it.

  Trying to downgrade with limited internet speed in the current location.

  Adobe-who takes care of the quality of your flagship software control?

  I managed to solve it (for now) by exporting my project in a new library on the desktop. I've also disabled my discrete graphics and unchecked the new importer dialog in the options.

  I am not a Nikon user so endearing was not the problem, but have had several accidents to export. And it seems that the issue of Nikon has been known for some time. How is always a problem with the version of the software?

  This could not be specific to El Capitan, but even if it is - man, I don't know that adobe must have had a final copy of 10.11 for awhile!

  I take the point that it's my job, that I should hold off upgrading and for that I take full responsibility. However, it is a point release update of Lightroom - I find this incredible situation of bugs this great!

  Shame on you Adobe to unwind a borked update to 10s of 1000s of people on software that people are really on.

• Research routers /End node in the ListBox control and save in two ListBox

  Hello

  I'm trying to copy routers and end nodes configured node in two different listbox... When I try to copy any node configuration 3212 copy in routers ListBox.Plz give an idea

  Hi Rita,.

  Change of use part to avoid empty spaces. If you use default tunnels in case of structures, it will add values in the default output array.

  The attached VI may help you.

  Kind regards

  Murali

  CLA

  * Congratulations are welcome *.

• Help, DG filtering using the combobox controls and the text box

  I have a DG populated an arrayCollection collection. I have a text input where I can type in my search criteria to filter the DG. I also have a combo box that contains a list of all the columns in my DG, so I can determine what column to apply the filter.
  
  I was able to make a filter text on a DG in the past, if I use a static data in my arraycollection collection name, but this time I want it to be dynamic using the drop-down list box.
  Here is an example of my configuration:
  DG contains columns A, B, C, D and E. The drop-down list box contains the choices A, B, C, D and E - including the label and the value of the data are the same in this case. If I select choices from the drop-down list box and start typing in my text entry, the DG should start to filter according to my entry that is contrary to the values of column D.
  
  Here's my code work for static column D filtering:
  private function filterColumn (): void {}
  sFilter = TextFilter.text;
  myAC.filterFunction = doFilter;
  myAC.refresh ();
  }
  private void doFilter(obj:Object):Boolean {}
  var result: Boolean = false;
  If (! obj.) D.Length | obj. D.toUpperCase () .indexOf (sFilter.toUpperCase ()) > = 0) {}
  result = true;
  }
  return the result;
  }
  
  This code will allow me to type in text and it will only filter the D column. The value of the combo box has no importance at this stage.
  
  I need the code to make what use the value combobox.selectedItem.data instead of D. However when I try this, he told me - TypeError: Error #1123: filter operator is not compatible with the Object type
  
  Using most of the above code, I just changed the IF statement to:
  If (! obj.) (cbx.selectedItem.data) .length | obj. ((cbx.selectedItem.data) .toUpperCase () .indexOf (sFilter.toUpperCase ()) > = 0)
  And which generates the above error.
  
  Can someone help me find a way to replace by a static column for the dynamic combobox value value? Any help is appreciated.

  I thought about it.

  If (! obj [cbx.selectedItem.data] .length: obj [cbx.selectedItem.data] .toUpperCase () .indexOf (sFilter.toUpperCase ()) > = 0)

  For anyone who wants to try it.

• How to make my waveform in the simulation design and control work continuously?

  Hi all, I m a begineer to Labview and have a few question.

  I use the Labview to design and implement a controller for FOPTD system, but I found that the waveform in the 'loop control and simulation"does not work continuously. I mean keep repeating in the same graph from 0 to 10 seconds. Is there an approach to make it run continuously?

  Thank you very much.

  Whenever a loop Control Design and Simulation is executed, it connects a full simulation, the initial time for the last time. When you drop a new loop CD & Sim down, the default values are zero second initial time and 10 seconds for the last time. I guess what you probably want is for simulation do not stop at 10 seconds. Double-click the left node attached to the CD & Sim loop and extend the end time. You can change the end of 'Inf' time if you want it to run until the VI is stopped.

• FPGA controls and indicators appearing is not in the node IO FPGA.

  I don't know there is something simple, that I do not. I use the pure mode of FPGA on my sbRIO. I have several controls and indicators that I added to the FPGA code since the last compilation. I compiled the code and ran it again once or twice. However, the new controls and indicators do not appear as options in the FPGA to e/s nodes on the side of the RT. What is missing?

  Thank you!

  Hi Adrien,.

  How you bind the host RT code to FPGA code?  It seems to me that you are accidentally linked to an earlier version of your FPGA code that does not include new controls/indicators that you are looking for.  Check the Open FPGA VI reference VI in RT to see if you're related to the FPGA VI, the right Specification to buildor latest Bitfile (xxxx.lvbitx).

  If you link to the VI or the specification of the Build that you consistantly use to compile, you won't have to worry of re - bind your RT and FPGA VI after each compilation.  If you bind to the bitfile directly, you will need to update your RT references after each compilation at the last bitfile.

  Kind regards

• I can't resize any object inside a tab control and control of the tab itself

  Hi all

  Since this morning I noticed that I can't always resize the object placed inside a tab control or the control tab itself.

  I have a few objects (controls, indicators, etc.) outside of the tab control, and they are resizable (I can see the dark blue squares and I am able to adjust the object); Instead, any object inside the tab control is still not resizable (when I select the dark blue boxes are not visible and I can't access the properties of the object by clicking with the right button of the mouse over it). If I have access to the properties of the object to the block diagram, the appearance of her-> frame size is gray and I can't change the size fields.

  It seems that something was changed when I try to adjust the minimum window size and appearance of windows in the proposals of VI, but I restore the previous values...

  How can I solve this problem?

  Sure, tab control is not locked.

  If the tab control is locked that resize is not possible

  Lucast85 wrote:

  Hi all

  Since this morning I noticed that I can't always resize the object placed inside a tab control or the control tab itself.

  I have a few objects (controls, indicators, etc.) outside of the tab control, and they are resizable (I can see the dark blue squares and I am able to adjust the object); Instead, any object inside the tab control is still not resizable (when I select the dark blue boxes are not visible and I can't access the properties of the object by clicking with the right button of the mouse over it). If I have access to the properties of the object to the block diagram, the appearance of her-> frame size is gray and I can't change the size fields.

  It seems that something was changed when I try to adjust the minimum window size and appearance of windows in the proposals of VI, but I restore the previous values...

  How can I solve this problem?