Sony Vaio - Tuner Hardware - VGC-LS30 series

My computer crashed and had to be replaced the hard drive. When I took my computer to the repair shop, everything worked as before except for the TV. When I try to put up to the TV is not said: 'NO TV Tuner hardware detected. Is there something available for download or should I buy it?

http://eSupport.Sony.com/en/VAIO

Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

See you soon.

Mick Murphy - Microsoft partner

Tags: Windows

Similar Questions

  • Where can I find the implementation hints for my xbox media center-8 digit code working on my vista sony VAIO VGC LS30

    I have a XBOX360 and it's hooked up to my Sony VGC LS30 all-in-one with an audio and video entry for my Media center and it asking me to place and extension and when I do want a 8 digit code? where can I find the code to 8 digits.

    Thank you

    Jimmy

    Hi Jimmy,.

    I suggest you to send your request in Forums Xbox to better support:

    Xbox forums

    For more information:

    Demonstration: Creating an Xbox 360 in an Extender for Windows Media Center unit

    Configuration of your Xbox 360

    Set up a Windows Media Center Extender device

  • Sony VAIO VGC-LS30 memory

    Is it possible to upgrade a Sony Vaio VGC-LS35 more than 2 GB of RAM?

    Hi oldcutler!

    Based on the specifications of your VAIO computer.

  • Sony vaio fw Series notebook PC hangs after complete recovery using the recovery disk

    I have sony vaio fw notebook computer series. the problem is that a week ago my laptop keyboard did not work properly, his work of sttops not all but a few keys and I stop directly by using the power button / stop and then I turn it on after day and the computer started to freez. I though I could get rid of this by restoring the complete system and I did it by using the recovery disk that I created at the firrst time I've had this laptop. during the recovery process, my laptop crashes twice but in any case, I managed to do thanks to a system of complete restoration and after that when I turn on my laptop, then it worked fine for 10-15 minutes but after that it started to freeze up again. I had to stop it again using the button / stop and it happened about 5 - 10 times, after that I decided to do a full restore using the restore disc. as I was doing that the process is not complete because it crashes when I do this. Finally, I managed to do a full system restore after more than 10 + time and guess what it lights up then my laptop crashes completely. I can't open anything... mouse works very well but if tried click on any program then you can not click on it, please help what should I do now... p.s, my computer works fine in safe mode with networking, but in normal mode its completely freeze

    Hello

    Go to the Sony website and download the latest Vista drivers for your model.

    http://eSupport.Sony.com/us/p/select-System.pl?model_type_group_id=10

    If the problem persists after that, you may have a hardware problem.

    See you soon.

  • computer laptop Sony vaio S - series VPCS133GN, operating system windows 7 Professional (64 bit) genune, these days, my pen drives are not installation and opening

    I use a computer laptop sony vaio S - series VPCS133GN operating system windows 7 Professional (64 bit) genune, last few days my pen drives are not installation and opening. Kindly help me.

    Best regards

    A.C. Dutta

    Hi Johanna,.

    Thanks for posting your query in Microsoft Community.

    I understand that you can not use the USB in Windows 7.

    I imagine the inconvenience that you are experiencing. I will definitely help you with this

    1. you get any error message?

    2 have you tried using different USB ports?

    3. any other USB key works on the computer in question?

    4. do the USB works on any other computer?

    5 have had any changes made to the computer before the show?

    Please follow the methods.

    Method 1:

    Run the Microsoft fixit for the link.

    Hardware devices do not work or are not detected in Windows

    http://support.Microsoft.com/mats/hardware_device_problems/en-us

    Method 2:

    As all devices have same also have USB device associated drivers. Appropriate sometimes drivers not detected after initial installation so reinstalling the drivers can fix the problems.

    You can check after uninstalling and reinstalling USB drivers if you are able to connect. You can disconnect all USB devices and then perform the following steps:

    (a) click Startand then click Control Panel.

    (b) click system and Maintenance, click System, and then click Device Manager.

    (c) Note if the control panel is in Classic view, double-click Systemand then click on Device Manager.

    (d) If you are prompted for an administrator password or a confirmation, type the password, or click allow.

    (e) in Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".
    Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

    (f) repeat step 2 to uninstall all items under 'USB Bus controllers'.

    Then, restart your computer and Windows 7 will automatically reinstall all USB controllers.

    We would be more than happy to help you if the steps above did not solve the problem.

  • Keyboard and touchpad not working not not after reboot. Windows 8 Sony Vaio T series Ultrabook.

    My Sony Vaio T series Ultrabook running Windows 8 froze during the execution of a program. The Task Manager does not work, so I used the sidebar on the touch screen to restart. Once I had restarted, or the keyboard or the touchpad worked besides than the backlight on the keyboard. I tried to use the restore system to return a few days, but without success. In my device manager, there are yellow signs next to my keyboard and touchpad. An external mouse does not work either! After a repair, he says: my computer has problems with PnP devices. I can browse only my computer with its touch screen and it's very tedious. I need this computer to type for the school. Help, please!

    Hi Darklo,

    I suggest you follow the methods listed below. Before continuing, please answer the question below.

    (1) what is the program that you try to run?

    I suggest you to follow the below methods and check if it helps.

    Method 1: Run the hardware troubleshooter and check.

    Follow the steps to run the Troubleshooter:

    (a) press the Windows key + C on your keyboard to display the bar of charms.

    (b) type of Troubleshooting , and then click solving problems under settings.

    (c) now, type Hardware Troubleshooter in the option Search .

    (d) click on hardware store to run the troubleshooter.

    Also try to update the drivers for the keyboard and the touchpad.

    Method 2: Update drivers for the keyboard and the touchpad.

    (a)  , press the Windows key + R, type devmgmt.msc.

    (b) right click on the keyboard.

    (c) click on Properties, click the driver tab.

    (d) click the Update driver button.

    (e) click on the OK button.

    Similarly, follow the steps to update the touchpad.

    Method 3:  Run the Microsoft safety scanner.

    The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note:

    The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

    Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

    Hope that this helps, if you have any additional questions, feel free to post. We will be happy to help you.

  • My Sony Vaio E Series model VPCEB32FM CD/DVD ROM is not working or projection upward. Please notify

    My Sony Vaio E Series model VPCEB32FM CD/DVD ROM is not working or projection upward. Please notify

    I tried to remove and reconnect.  I tried to look in the Device Manager.  I tried the patch Microsoft Fixit. None have seemed to work.

    What are some solutions.

    Thanks in advance

    cmczona,

    Did you try to apply this difficulty? If you have, and it still doesn't show, try to start it.  Make sure that you have a bootable disk and make sure it is set to boot from the optical drive in the BIOS first.  If you can't then it's a hardware problem and the player or another material is defective...

  • Why doesn't my computer series sony vaio y cannot detect / connects to a wireless connection

    Why doesn't my computer series sony vaio y cannot detect / connects to a wireless connection. only through connection cable/usb... Please help me... Thank you...

    Hi JaqD,
    to go with that said Brian, more in detail the best options, we can give you.
    In the meantime, here are some generic troubleshooting steps:
    http://support.Microsoft.com/kb/313242

  • WIFI ON MY SONY VAIO E SERIES SAYS WINDOWS WIRELESS SERVICE DOES NOT

    My Sony VAIO E Series windows wireless service does not

    the computer says that

    Hi Isabel,.

    1. Exactly when you receive this message? It's trying to access wireless internet?
    2. What is the exact model of your PC laptop Sony Vaio E series?

    Make sure that the laptop wireless switch is turned on.

    Method 1:

    Please follow the steps to start the WLAN service.

    1. Press the Windows key and R together to open run prompt and type services.msc
    2. Select the autoconfiguration WLAN service in the list, right-click on properties
    3. Change the startup type to automatic
    4. Click the Start button
    5. Click on apply, Ok.
    6. Restart the computer and check if it works.

    If the problem persists, proceed from the link below to fix this problem.

    Wireless and wired network problems.

    http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-81&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Reply to the post with an up-to-date report of the issue so that we can help you further.

  • Synchronization problems Blackberry Bold 9700 with Bluetooth of Windows 7 drivers Sony Vaio SZ series

    I have recently upgraded to Windows 7 with a clean reinstall on my laptop Sony VAIO VGN-SZ470N. Full specifications can be seen here: http://www.sonystyle.com/webapp/wcs/stores/servlet/ProductDisplay?catalogId=10551&storeId=10151&langId=-1&kw=vgn-sz470n/c&lp=8198552921665095013&productId=8198552921665095013#footNotes

    My goal: to sync my new Blackberry Bold 9700 wireless via bluetooth using the built-in radio. Many people have had problems with this and the forums are littered with solutions that have worked for others, but I'm having no luck.

    So-called: Device Manager software Blackberry won't recognize devices that are managed by Windows Native Bluetooth stack.

    What I did:

    Windows will automatically detect my bluetooth radio and installs the "Bluetooth USB Controller (ALPS/UGPZ6)" (hardware ID: USB\VID_044E & PID_300D & REV_1915, USB\VID_044E & PID_300D) driver. With this driver, I can go to the "add a device" with my phone in discovery mode, and the computer will not conclude it.

    If I go in ' control panel-> add devices ", the Add Device Wizard window will tell me it's looking two detectable Bluetooth devices found in the range. I went into control panel of-> see devices-> UGX (which resembles a bluetooth adapter bit) and there was no "bluetooth settings option when I would right click."

    After reading on the Blackberry forums that the BB only synchronizes with the Bluetooth of Windows stack, I updated my driver ALPS/UGPZ6 to "generic bluetooth adapter. The selection of this driver also installs driver for "Microsoft Bluetooth Enumerator. It also adds the bluetooth icon in the lower bar of good start near the time and date. I can now go to 'Add a device' and it will show my BB 9700. When I connect, matching Assistant is displayed on my phone and in windows. I enter a code on my blackberry and enter a code in the wizard windows. Both devices and then tell me that pairing has been successful. However, the two machines are.

    Once the BB is paired, tent windows install the drivers of the two newly discovered devices, then gives me an error and States that the drivers cannot be installed. It is said that it is impossible to install two drives, both devices are listed in the device as "Bluetooth Peripheral Device" Manager (Hardware ID BTHENUM\ {426c6163-6b42-6572-7279-44736b746f70} _LOCALMFG & 000D).

    In "devices and printers > Bluetooth' BB 9700 is now listed with a status of 'troubleshooting needs'." Although the devices are paired, the BB will ever show a status of connected, rather it will continue to just try to connect every two minutes or more. I can connect to my friends MacBook, but I have no idea how to test the fact that the connection works. I also noticed that in the screen 'Add features' phone bluetooth of my roommate. So, I looked for ways to resolve the missing drivers.

    I found three solutions supposed for the driver installation error which has not WORKED for me.

    (1) the first is to right click on the two strangers 'Bluetooth' devices in Device Manager and updated the driver in both cases to "RIM Virtual Serial V2". When you try to implement this solution, the status "needs Troubleshooting" will disappear, but blackberry Device Manager will not find the BB 9700 to add for bluetooth sync. Nothing else seems to change. Complete instructions for this solution have been listed here: http://supportforums.blackberry.com/t5/BlackBerry-Pearl-BlackBerry-8100/Need-Bluetooth-Peripheral-Device-driver-to-connect-to-8120/m-p/263541

    The other way, I tried to fix the driver error problem was to remove all the listed drivers and reinstall the generic Bluetooth USB controller and the enumerator. Then I went and downloaded the Windows Mobile Device Center Driver Upgrade. For the two unknown devices labeled "Bluetooth Peripheral Device", I chose the Bluetooth radio driver > Microsoft Corporation > peripheral support Windows Mobile.  Once again, the status in devices and printers troubleshooting message > Bluetooth devices disappear, but still the Blackberry device manager can't find the phone. I found the original steps for this here: http://www.computers.nepalesemap.com/index.php?topic=3.0

    (3) supposed to be the reason why the blackberry will not sync with the ALPS driver installation is because the windows bluetooth stack does recognize it not as compatible. So I uninstall the Bluetooth devices and blackberry. I restarted and the computer reinstalls the driver ALPS.

    I found a solution which says to edit the c:\windows\inf\bth.inf file and add the hardware ID that is listed in the device under the ALPS HardwareID driver manager. I have add the ID of the hardware to the list of devices, but the bluetooth enumerator installs ever, and I can't access the Bluetooth settings.

    Does anyone else have this problem? Can anyone help!


    Hi Cptnnemo,

    How do you close the computer, you have your Blackberry?  As with any Bluetooth, the device must be 3-4 FEET away from being discovered.  Please follow the instructions on the MSFT made, then try to keep your 3-4 feet away and try the discovery mode.

    Mithdraug

  • I am not able to install windows on my laptop sony vaio SVE15111EN series 7(any version). Error 0x8007045D

    I am not able to install windows on my laptop sony vaio SVE15111EN series 7(any version).

    Often, I get an error 0x8007045D.
    I made a Dvd of ISO to burn at 4 x speed. I checked the burning process.

    This means that theres a problem with your hard drive

    The car manufacturer has a utility bootable disk from audit

  • I get formatted my laptop sony vaio e series & now how can I turn on the built-in camera & bluetooth.

    I get formatted my laptop sony vaio e series & now how can I turn on the built-in camera & bluetooth.

    Assuming that you used your Sony disks restore those characteristics have been resettled

    See Sony support/help pages

  • Webcam not working not not for sony vaio e series vpceb14en

    my web cam web cam sony vaio e series vpceb14en does not work.

    Then display help on the Sony support site or their forums

    http://www.Sony-Asia.com/support/product/VPCEB14EN

  • How to turn on the backlight for the keyboard in Sony Vaio T series Ultrabook running Windows 8

    Original title: keyboard light... I NEED HELP!

    I just bought a Sony Vaio T series Bu201 windows 8. Does anyone know how I can change the bright keyboard or so-called backlit keyboard... I tried to find an answer, but even on the settings does not say how can I activate...

    Thank you, I called and found out that my laptop does not come with this feature :/ I got a Sony Vaio four years ago and it came with the keyboard feature which is why I thought it came with it too... In my opinion, any computer laptop should come with the option to turn on or off!

  • SONY VAIO F Series SVF15412CXB does support dual channel memory?

    SONY VAIO F Series SVF15412CXB does support dual channel memory?  Or is it only a slot?

    I'm curious to know if I can put a second stick of RAM in there for performance dual channel.

    Hi gremark,.

    I understand you want to be sure of everything. I checked the service manual for this model and even tried to open a laptop of the same type and I can assure you that this model supports the double delivery. You can add up to a stick more than 4 GB of ram to increase the memory capacity.

    ~ Mark

Maybe you are looking for

  • Satellite Pro M70, Possible replace the DVD - RW drive?

    I thought that in the future come lightscribe Slim DVD - RW. Is it possible to remove the build - in the disc that came with the computer, with a slim-line DVD - RW. I think the connection, it is standard on all readers optical slim for laptops, or i

  • Is the second graphics card for lenovo Y510p out forever?

    I just bought my new laptop Y510p but I expect to buy second card to complete the system for the games, but I learned that the new card is out of stock. Does this mean I'm stuck with the single graphics card forever? : (I no option to update my graph

  • "Turn off monitor" in the behavior of type custom step

    Hello! Currently in the drafting of the types of custom step based on sequences (default adapter of my type of step is a sequence), I would like to define the right ' off track ' in my step type definition. The problem is that this option is not visi

  • Control the analog output in *.vi

    Hi you all,. I have a PCI-6281 with a Bob SCB - 68 in any case, I use two channels of analog output to cross strains of certain instruments. Every time I restart the computer, I reset the tensions Explorer automization and measures. (I'm on measures

  • Registry cleaners are safe or not?

    Hello... I just want to know it's available on the internet registry cleaners are safe to use or not?  If use any registry cleaner it would harm my system or windows? Please tell me should I use any registry cleaner or not? [Edit Moderator: left the