Server cannot connect to the cluster

Similar Questions

• Server cannot connect to the https

  I found the installation of software that our main server cannot access any site that requires https. I checked using Internet explore and firefox and no work. We have a Sonicwall firewall but can't find anything obvious here.

  Please contact a forum that manages your server product. If it is Windows server, then check on http://social.technet.microsoft.com/Forums/

  You can also add more details when reposting here, as the description above is not much information about the problem.

• Security Server cannot connect to the replica to connect to the server

  
  Hello

  I want to set up two security servers. Each connected to a login server.

  The installation of the Security Server works only when I connect to the backend connection.

  Telnet using port 4001 to replicas login server does not work. (from the Security Server)

  On the login replica server firewall rules seems to be OK.

  Who can help me here?

  Jan Willem

  It certainly works. Have two security servers, each associated with a connection to the server (for example a standard and the other a replica) is a very common scenario.

  Double check the rules in your firewall if you have an external firewall between your security servers and connection. Check for the setting procedure Administrator's guide matching password etc and for matching Security Server Troubleshooting section.  Make sure that the two security servers are configured the same (no group political advertising strategies of firewall different, firewalls running on all servers etc..). Make sure that the two connection servers are configured the same.

  Let us know what it was.

  Mark

• ESXi server cannot connect to the netowrk

  Hello

  I have installed ESXI 6 on a new host, and that you have set up the network in the usual way, but it can not ping to the gateway. I can see all the Nic are connected and have checked the settings. I looked in the newspaper and may see the following errors

  In the newspaper vobd I see the State of the physical link is up, followed by an event (esx.clear.net.vmnic.linkstate.up) could not be sent immediately to spend; tail to try again

  the newspaper cannot open the file DictionaryLoad:"//.vmware/preferences': no such file or directory

  Thank you

  Paul

  What are the ports on the switch uplink? Trunk or access?

  If trunk do you have native located on the port Vlan (switch side)?

  R

• error code: err.avg.pop3 proxy server cannot connect to the mail server. port110, secure (ssl): no.server error0x800ccc90, 0x800ccc90 error number

  Get this error when you try to send mails. Outlook express

  AVG is the cause of this error message. Try to disable mail scan in AVG and see if that helps. (Tip: AVG is causing more headaches with each update.) You may want to consider another AV program is more compatible with Outlook Express). Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• Help! Safari cannot connect to the server

  I really need help! I tried to forget the network and turning it back on, I have disabled the firewall and remove all extensions of safari. I seems that nothing works.

  I get the message 'Safari cannot connect to the server' on almost every site except this and facebook. I can't enter same Urbanoutfitters.com or ASOS. I just got the message "Safari could not connect to Server" I'm not a computer genius so hopefully someone here can help me...

  You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

  Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

  Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

  Step 1

  VSearch malware tries to hide by varying names of the files it installs. It regenerates itself also if you try to remove it when it is run. To remove it, you must first start in safe mode temporarily disable the malware.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for other instructions.

  Step 2

  When running in safe mode, load the web page and then triple - click on the line below to select. Copy the text to the Clipboard by pressing Control-C key combination:

  /Library/LaunchDaemons

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.

  There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. Files that belong to an instance of VSearch will have the same date of change for a few minutes, then they will be grouped together when you sort the folder this way, which makes them easy to identify.

  Step 3

  In the LaunchDaemons folder, there may be one or more files with the name of this form:

  com Apple.something.plist

  When something is a random string, without the letters, different in each case.

  Note that the name consists of four words separated by dots. Typical examples are:

  com Apple.builins.plist

  com Apple.cereng.plist

  com Apple.nysgar.plist

  There may be one or more items with a name of the form:

  com.something.plist

  Yet once something is a random string, without meaning - not necessarily the same as that which appears in one of the other file names.

  These names consist of three words separated by dots. Typical examples are:

  com.semifasciaUpd.plist

  com.ubuiling.plist

  Sometimes there are items (usually not more than one) with the name of this form:

  com.something .net - preferences.plist

  This name consists of four words (the third hyphen) separated by periods. Typical example:

  com.jangly .net - preferences.plist

  Drag all items in the basket. You may be prompted for administrator login password.

  Restart the computer and empty the trash.

  Examples of legitimate files located in the same folder:

  com.apple.FinalCutServer.fcsvr_ldsd.plist

  com Apple.Installer.osmessagetracing.plist

  com Apple.Qmaster.qmasterd.plist

  com Apple.aelwriter.plist

  com Apple.SERVERD.plist

  com Tether.plist

  The first three are clearly not VSearch files because the names do not match the above models. The last three are not easy to distinguish by the name alone, but the modification date will be earlier than the date at which VSearch has been installed, perhaps several years. None of these files will be present in most installations of Mac OS X.

  Do not delete the folder 'LaunchDaemons' or anything else inside, unless you know you have another type of unwanted software and more VSearch. The file is a normal part of Mac OS X. The "demon" refers to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.

  If you are not sure whether a file is part of the malware, order the contents of the folder by date modified I wrote in step 2, no name. Malicious files will be grouped together. There could be more than one such group, if you attacked more than once. A file dated far in the past is not part of the malware. A folder in date dated Middle an obviously malicious cluster is almost certainly too malicious.

  If the files come back after you remove the, they are replaced by others with similar names, then either you didn't start in safe mode or you do not have all the. Return to step 1 and try again.

  Step 4

  Reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

  ▹ Safari preferences... ▹ General

  and click on

  Set on the current Page

  If you use Firefox or Chrome web browser, remove the extensions or add-ons that you don't know that you need. When in doubt, remove all of them.

  The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

  Step 5

  The malware lets the web proxy discovery in the network settings. If you know that the setting was already enabled for a reason, skip this step. Otherwise, you should undo the change.

  Open the network pane in system preferences. If there is a padlock icon in the lower left corner of the window, click it and authenticate to unlock the settings. Click the Advanced button, and then select Proxies in the sheet that drops down. Uncheck that Auto Discovery Proxy if it is checked. Click OK, and then apply.

  Step 6

  This step is optional. Open the users and groups in the system preferences and click on the lock icon to unlock the settings. In the list of users, there may be some with random names that have been added by the malware. You can remove these users. If you are not sure whether a user is legitimate, do not delete it.

• My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  Assuming that you have a valid SIM card in the phone, it is more often symptomatic of a phone that has been hacked or jailbroken to unlock.

  Where do you have the phone first?

• iPhone cannot connect to the server to iCloud

  Hello!

  My son IPhone cannot connect to the server iCloud. App Store is not available. In the iTunes and App Store from the settings app, I can't log in. IPhone resetting is not possible. Restore from iTunes on Mac is not possible, because find my iPhone is active on the iPhone, and it cannot be turned off, because in the pane of the application of the iCloud settings can't do anything until I have to accept the new terms and conditions, which cannot be made.

  WiFi on the phone works great with Safari, Mail, but cannot get new e-mail messages. The weather application does not connect.

  His iPad that is connected to the same iCloud account has no problem and there is no problem to connect to his account on iCloud.com.

  I tried to restart and reset hard iPhone and updated to 9.3.4 via iTunes on Mac (which went without pain, but doesn't change anything).

  Any help much appreciated!

  Does anyone have advice at all...? Aside from throwing the thing?

• Outlook: "cannot get mail" "cannot connect to the server.

  April 6 at 7:00 PM CST, my iPhone 5 running iOS stopped syncing with my Microsoft Outlook account 9.3.1.

  I did have problems with my iPhone sync with my Outlook email over the past 5 years so far.

  My Outlook account is to these servers-

  web mail:
  https://blu183.mail.live.com/

  for Windows Live Mail 2012:
  https://mail.Services.live.com/DeltaSync_v2.0.0/sync.aspx

  I tried to delete my Outlook account from my iPhone and re-establishment and the account Outlook 'checks' correctly - but this does not solve the problem.

  The iPhone keeps displaying a pop-up message:
  "Cannot get mail" "cannot connect to the server.

  My iPhone is syncing correctly with my Gmail accounts and iCloud.

  Also, I created my Outlook account on iPad to my daughter who is running iOS 8.1.2 and I have the same problem.

  This seems to be a situation of the Apple servers, do not sync with Microsoft servers.

  Thank you

  It seems that Outlook is to have questions, not only with iPhones but W10, see this thread:

  I lost all my contacts.

• Some Web pages do not allow (safari cannot connect to the server)

  I can't access some Web pages like the movie online, eBay, Amazon, etc. sites, when I try, I got the note as 'safari cannot connect to the server' and my chrome also got error like massage "this webpage is not available" more my App Store unable to work properly can not download updates»» I tried to delete all the data of the website... and uninstall extensions, but there was not work //I got a MacBook Pro 2014 middle with OS X EL capitan 10.11.2//some on help me please

  Please remove the 'ESET' product (if you have it installed) by following these instructions. If you have a different version of the product, the steps may be different.

  Back up all data before making any changes. Never install any product "anti-virus" or "anti-malware" again.

• FSX won't turn on, says that it cannot connect to the server

  Hey, I tried to register my copy of Microsoft flight simulator X deluxe edition and it does not work I tried to register it hourly it says it cannot connect to the server);

  Hello

  What version of Windows operating system do you use?

  I suggest you to consult the following Microsoft article and check if it helps.

  
  Solve problems with activation for Microsoft games problems and mapping programs
  http://support.Microsoft.com/kb/960480
  
  Note : the steps mentioned below includes the modification of the system registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
   
  Back up the registry: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry
  Also see: frequently asked questions on how to enable Microsoft Games for Windows, streets and trips and Mappoint: http://support.microsoft.com/kb/927007

  If you still experience the problem, then I suggest to contact with support of Flight Simulator for further assistance.

  http://support.Microsoft.com/GP/games-for-Windows

  http://www.Microsoft.com/products/games/FSInsider/tips/pages/default.aspx

• Windows cannot connect to the printer. The name of the printer has been correctly entered, or the specified printer has lost its connection to the server.

  A Windows Server 2003 Standard Edition SP2 32-bit computer is a field, the file and print server.

  A computer on the domain is a machine of Windows 7 Ultimate 64 - bit with HP DesignJet 500 24 printer connected via USB.  The printer is running the latest firmware.  The PC is running the latest 64-bit drivers with no problems to the host machine printing.  The host also has the latest drivers 32-bit (x 86) installed by downloading by other computers on the network.  The printer is configured to share with the share name of HPDJ500.

  Now, on a machine Windows XP Pro SP3 32 bit on the field, I'm trying to connect to the shared printer.  Add a printer > click Next in the wizard of > check "a network printer or a printer attached to another computer" and then click Next > click on "Find a printer in the directory", then click Next > click Find now > HPDJ500 in the list below (the XP machine can see the shared printer on the Windows 7 computer!) and click OK.  At this point, I get an error that says: "Windows cannot connect to the printer.  The name of the printer has been correctly entered, or the specified printer has lost its connection to the server.  For more information, click Help. »

  Alternatively, if I right-click on the HPDJ500 printer listed, then click on connect, I get the same error message but I also see a separate window that says "Connecting to HPDJ500 on H2.ws.net" with the lively projector.  This window also disappears as soon as I clear the error message.

  Please note that this printer worked perfectly as a printer shared, hosted on a machine XP 32 bit on the field.  It works perfectly for the new Windows 7 64-bit machine, but we cannot connect from anywhere else on the network (including the server which translates the same exact error message).  On the server, I also preinstalled drivers thinking there was a problem with a 32-bit computer, trying to grasp the correct drivers from the host 64-bit Windows 7, but that doesn't change anything.

  How connect to this printer?

  Try using the path UNC path of the printer in the Add Printer Wizard.

  Add a printer > network printer > connection to this printer ((deuxieme point)

  Click next to browse (leave blank, the name field) or type the UNC path of the printer (i.e. \\Computername\Printername) path

• Media Player cannot connect to the server - Original COOD2EE7 error code

  Tried media player - tools - options-network. Cannot configure the Protocol / the proxy settings. Streaming proxy settings area is empty.

  Hello Adelek,

  Thank you for posting.  It seems that you may have a firewall problem.  I that you would suggest to check your firewall settings to see if it's to allow access of media player.  I've also included some basic information about this error.

  Please let me know if this helps you.

  You got the C00D1198 error message when you use Windows Media Player. The following information can help you resolve the problem.

  Unable to connect to the server

  Windows Media Player cannot connect to the server that hosts the content you want to listen to. You may encounter this error message for the following reasons:

  • The name of the server that hosts the content is not valid. If you typed an address Uniform Resource Locator (URL) in the open URL dialog box, verify that the file name is spelled correctly and that the path to the file is correct, and then try again. If you clicked a link on a Web page, the link isn't valid.

  • The server is not available (for example, the server is busy or not online). Try again later.

  • For Windows Media Player proxy server settings are not configured correctly. Verify that your proxy server settings are correct.

    To check your proxy server settings

    1. Click the arrow below the now playing tab, and then click More Options.

    2. Click the network tab.

    3. Check your settings in the Streaming proxy settings area.

       Note

       • If you don't know what your proxy server settings should be, on the network tab, select a Protocol, click on configure, then select Autodetect proxy settings or use the the proxy settings of the browser (available for HTTP protocol only).

  Zack
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• I'm unable to connect to Microsoft Lync. "Cannot connect because the server is temporarily unavailable."

  original title: Microsoft Lync

  Unable to connect to Lync

  Cannot connect because the server is temporarily unavailable.
  If the problem persists, contact the support team.

  Well, given that the server is temporarily unavailable, you cannot connect. If you wish to contact the support team, you contact the Lync support team. Nothing to do with this forum.

• Media Player all of a sudden will not play the dvd. Error message: Windows Media Player cannot connect to the server

  Original title: Media Player all of a sudden will not play the dvd.

  Suddenly, I can't play DVDs on my laptop. The error message is: Windows Media Player cannot connect to the server. The name of the server are may not be not correct, ther server name maybe isn't available, or your proxy settings are may not be not correct. Any suggestions on troubleshooting of Microsofts page appear to be relevant.

  Hi mcraigQY

   

  1. when exactly you get the error message?

  2. you try to listen to music from any remote location or try to play a DVD?

  3 have you tried to play a different CD or DVD?
  4. what happens when you play the same DVD on another computer?

  5. for how long have you been faced with this problem?

  6. the DVD folder that you are trying to play supported by the windows media player is it?
  7. What is the type of DVD that you try to play?

  Let us know the answers to help you best.