Server EPMA starts does not after upgrading 11.1.2.1 11.1.2.2
Hi allI've updated 11.1.2.1 EPM system 11.1.2.2 and when I try to start the server of EPMA. Its starts not when I checked event viewer connect his watch below.
Service cannot be started. Hyperion.DimensionServer.Interface.Exceptions.EPMAServiceException: Failed to initialize the Session Manager. ---> System.Configuration.ConfigurationErrorsException: Configuration system failed to initialize---> System.Configuration.ConfigurationErrorsException: Unrecognized configuration section system.serviceModel. (C:\Oracle\Middleware\EPMSystem11R1\products\Foundation\BPMA\AppServer\DimensionServer\ServerEngine\bin\EPMA_Server.exe.Config, line 3)
at System.Configuration.ConfigurationSchemaErrors.ThrowIfErrors (Boolean ignoreLocal)
at System.Configuration.BaseConfigurationRecord.ThrowIfInitErrors)
at System.Configuration.ClientConfigurationSystem.EnsureInit (String configKey)
-End of the exception stack trace internal-
at System.Configuration.ConfigurationManager.GetSection (String sectionName)
at System.Configuration.PrivilegedConfigurationManager.GetSection (String sectionName)
at System.Net.Configuration.SettingsSectionInternal.get_Section)
to System.Net.Sockets.Socket.Initi...
Can you Veuileez help me.
Kind regards
AS
Enjoy reading the following in Support of Oracle - "EPMA Server start don't no - EPMAServiceException: failed to initialize the Session Manager." "---> System.Configuration.ConfigurationErrorsException: Configuration system failed to initialize [ID 1464564.1].
See you soon
John
http://John-Goodwin.blogspot.com/
Tags: Business Intelligence
Similar Questions
-
Update of Pluging Manager works does not after upgrade
I think I'm having the same problem as everyone else and I'm pulling my hair out trying to understand what is happening. Let me first start of by saying that I am in no way a SQL DB, so I'm just Dodge my way through so far with no luck. So far, that's what I did. I was running ESX 3.5 U4 and vCenter 2.5 U4 with a server remote phyiscal SQL 2005 for VCDB & UMDB. I upgraded to 4.0 vCenter and everything was fine. Then I tried to update Update Manager. He's been through, I managed to install the plugin Update Manager, but it is disabled and whenever I load the vSphere Client I get and error, "there was a connection to VMware vCenter Update Manager error - vcenterserver:8084.» Unavailable temporarliy database or network problems.
At the moment I have:
VMware VirtualCenter Server Service set to automatic and log in under the same account AD as with the previous version.
VMware Update Manager Service is set to automatic and log in as a Local System. Update Manager service will not start if you use this account or any account AD.
System DSN defined for the Update Manager and VirtualCenter with SQL Native Client driver. Remote server entered correctly and I use Windows authentication integrated with the default correct database selected and everything else is default. When I do a Test connection, I get a successful connection with the two system DSN.
However, Manager of continuous update not working which VirtualCenter Server works fine and both of the DB is on the same remote server. Just for fun, I tried to install SQL Express on the vCenter Server Server for the Update Manager and it worked. However, I would use the same DB Update Manager that I used on the remote server. I checked the log file, and that's what I'm after launching the vSphere client.
Product = VMware Update Manager, Version 4.0.0 Build = 162871 =
Managed implementation information configuration process
Unable to get the module name to process 4. Error: 299. Ignoring the process
Starting managed the java.exe process
Starting managed process rdevServer.exe
Internal Manager of the tasks established demand...
Handler created email alerts...
Configuration manager created...
Locking of entity manager created...
Key responsible VALM C:\Program Files\VMware\Infrastructure\Update Manager\ssl\valm.key
Health services manager created...
Collector of statistics created task...
Record of integrity. BaselineComplianceStatusCollector: true
Integrity.ComplianceStatusManager trace: true
Record of integrity. DVSManager: true
Record of integrity. ScheduledTaskManager: true
Record of integrity. SessionManager: true
Record of integrity. UpdateComplianceStatusCollector: true
Record of integrity. UpdateManager.remediate: true
Record of integrity. UpdateManager.scan: true
Record of integrity. UpdateManager.stage: true
Record of integrity. VcIntegrity.setConfig: true
Record of integrity. VcIntegrity.setNewUpdateConfig: true
Add reminder to Ufa Shutdown manager.
ODBC error: (28000) - [SQL Native Client] [SQL Server] Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON '.
ODBC error: (28000) - [SQL Native Client] [SQL Server] Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON '.
ODBC error: (28000) - [SQL Native Client] [SQL Server] Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON '.
I don't know what that means or how to fix. Any help would be grateful.
Hello
As far as I understand, you are using integrated Windows authentication. Can you please try to use SQL Server authentication instead of Windows authentication? Update Manager does not support Windows authentication when the database is on a remote computer. The database and the DSN system must use SQL Server authentication.
You can also take a look at the following thread: http://communities.vmware.com/thread/212853?tstart=0.
Hope this helps,
Margarita
-
Integrated WLS starts does not after activating all the flags "Debug".
Hello
I have JDeveloper 11.1.1.4 with Integrated Weblogic Server. I had activated all "Debug" flags in the WLS and now after the bounce required servers, it does not come to the top. Should I did more than all the "Debug" options, but I am just unable to login to turn it off.
Is it possible to get around this problem?
Thank you
Vikas
Check also if you could comment on the underside of the elements in the config.xml file and restart the server, if you have not kept the backup copy of the configuration file.
WebLogic true If the server still does not start, check the server log, for errors or critical problems and go back with the details or error stack trace to help you.
Thank you
Vijaya
-
CRS starts does not after reboot
Hello
I just installed RAC in a test environment using vmware server 2. I have Oracle Enterprise Linux 5 and used oracle 11g (11.2.0.1). I have not yet installed the software database and the oracle grid infrastructure has just installed.
When I restart the node and deliver 'crsctl check crs', I see after release.
[root@rac2 ~] # crsctl check crs
CRS-4638: Oracle high availability Services is online
CRS-4535: cannot communicate with Cluster Ready Services
CRS-4529: Cluster Synchronization Services is online
CRS-4533: Event Manager is online
Now, "crs_stat t" does not work unless I manually start the crs daemon by using the command "crsd start." Why the crs daemon starts not automatic unlike 10 g RAC. Is this a normal behavior and what is a good way to make this daemon to auto-start.
SalmanI guess you run crsctl check crs immediately after the restart. It doesn't take long for the crs start and you don't have to start it manually. By default, crs is started automatically and if for any reason any you disabled, you can enable it using 'crsctl enable the crs '.
You can also check the status of different services using the:
# crsctl check crsd -
LR6 starts does not after decommissioning of CC2015
Hello
After trying Lightroom CC 2015 (. 2?) on mac OS X Yosemite (1 month trial), I decided to buy LR6, rather than taking the subscription to CC. So I bought the DVD LR6 and installed.
After installation, when I try to run LR, I have a picture of trees in the mountain and the program is blocked at this point.
I tried to uninstall everything beforehand CC, removed all instances of Adobe in my file system (in / applications and / library) and reinstalled LR6: does not make better.
I also moved my catalog used during the trial (in ~/Pictures/lightroom), in this case, the program ask me to create a catalog. Then appears in the main window, but I still have the window of launch (with trees in the mountain), and LR is blocked.
I need help. Maybe I need to reisntall OS x from scratch?
Hi brunop,
Please click on the link below to download and upgrade to version 6.3 of Lightroom
Lightroom CC 2015.3 / 6.3 now available
Let me know if it helps.
~ UL
-
SRM starts does not after migration to vCenter
Hi all
We are moving some things regarding the vCenter and SRM. vCenter and SRM are on separate servers, remain like this once all the moves are complete. I currently work in a test environment in order to eliminate the process. Moreover, all this is actually in 4.1 U 2.
The vCenter and SRM databases are moved to new servers. vCenter also moved to a new server. SRM will not move.
So far, the migration went well. Everything worked fine after the vCenter and SRM databases have been moved. vCenter worked well after being re-installed on a new server. However, now I have problems with MRS after the modified vCenter (hostname/ip). It won't start (or at least it is in a perpetual state start) and the log file is similar errors to: could not establish a connection to VMware vCenter.
This makes sense since the vCenter hostname/ip just be changed. To try to find a way to solve this problem, I was looking for to http://kb.vmware.com/kb/2008033. I tried to adjust the database, but now he complains about host certificates. I'm starting to think about a re - install MRS. from scratch may be the best option.
Y at - it an easier way, or am I missing something?
Thanks for your help...
Hello
The Ko, you mentioned suggests to re - install RS, so I think it is necessary, and there is not another way.
Michael.
-
X 230 starts does not after replacing dc jack
Hello everyone, I've replaced the dc Jack by the following materials repair manual, but the laptop does not start (zero response when you press the power button / stop) later. When the power adapter is plugged in, the battery light flashes three times, because of connection.
My suspicion is damaged key board or could be the motherboard. Please advise on how to continue. Backup battery is has nothing to do with the starting of computer?In your case. There is a high probability that something is wrong with the keyboard. But it could be something else.
-
vMotion works does not after upgrading to 5.5 U2
Hi all. We are current running an instance 5.5U2 vCenter after upgrading from a 5.1.
vMotion fully automated or manual jobs will fail with the following error. PBM. Fault.PBM fault.summary
Patches online that I could find refer to fixes for this same error but inside of vCenter. We run VC on Windows 2008 R2.
Someone has seen this before and have a hand on repair. Thanks in advance.
Did you check if engine storage profile is running?
Connect web client and check out vCenter healthcare services and make sure that fix you something unusual.
-
External monitor works does not after upgrade
Hello friends.
Computer and software (Production Premium CS5.5) have improved. I use an external bridge connected via Firewire. Premiere Pro sees the bridge but does not the image/video to it. I even managed to capture from the first bridge without problem. No matter what I tried first will not export to the NTSC monitor. He did it in Production Studio Premium. With the software, I had before she would export any SD NTSC image or video. I produce a weekly television show and my external NTSC monitor is a must for the color calibration. Any help would be greatly appreciated.
CS5.5 Production Premium
Two DVI monitors
Quadro 2000 video card
Windows 7 Professional - 64-bit
I7 with 16 gigs ram
-
JDeveloper starts does not after MAF 2.1 update
Hello
12.1.3 JDeveloper / MAF 2.1 / Windows 7 Prof 64 bit / JDK 1.7
I just updated the MAF from JDeveloper extension (Help - Check for Updates).
I had earlier version 2.0 of the MAF and it worked very well.
After this 2.1 update, I was not able to start the JDeveloper. The update succeeded.
It gives me error when I try to open up JDeveloper below.
I also tried to remove the "system12.1.3.0.41.140521.1008" folder, but it is still not start.
I've seen other posts in this forum but some developers could start JDeveloper after the update.
Can you get it someone please let me know if there is a way to solve this problem?
Does JDK1.8? I still have my JDeveloper running on 1.7
Error
------
Warning - could not install some modules:
Master + URL FileSystem - module named oracle.ide was needed and not found.
Cache - module named oracle.ide extensions was needed and not found.
Profiler Java (common) - none of the modules providing the org.netbeans.lib.profiler.common.Profiler capacity could be installed.
JDeveloper/NetBeans bridge - module named oracle.ide was needed and not found.
Actions - the module named oracle.ide bridge was needed and not found.
Profiler Impl - module named oracle.ide.runner was needed and not found.
Profiler Impl - module named oracle.ide was needed and not found.
Profiler Impl - module named oracle.jdeveloper.runner was needed and not found.
JDev projects via NB API - module named oracle.ide was needed and not found.
GUI Builder to JDev - module named oracle.ide was needed and not found.
3 additional modules could not be installed because of the above problems.
Thanks for any help.
Sameer
Not exactly what goes wrong with your installation.
In general JDeveloper 12.1.3 must be started with JDK 1.7
You must also have 1.8 JDK on your machine, and the extension of the MAF will need to know its installed location.
I suggest that you remove the system12.1.3 directory, and then re - install JDeveloper in a new location.
When you install JDeveloper, if you use the installer of pot, make sure that start you with JDK 1.7.
(Should be fine if install you using the exe file).
-
JDev 12 c starts does not after a successful installation
Hi all. Thanks in advance for your help.
I just downloaded JDev Studio 12 c. I downloaded the 32-bit and installed linux on my 13.01 Ubuntu distribution. I worked with JDeveloper since 11.1.2.3 version on my Ubuntu system, without any problems at all. However, after the successful of Jdev 12 c installation (I received a warning because Ubuntu is not in the list of certification for linux OS) when I start it I got the following error message:
I've already set up the open file limit and the shell command: ulimit-n displays 4096 as suggested in the guide installation and before the race. / jdev I set ulimit-c unlimited, startup appears, but after a while, I get the following text on my console window:
---------
#
# A fatal error has been detected by Java runtime environment:
#
# SIGSEGV (0xb) at pc = 0x6537f1e0, pid = 14655, tid = 1756736320
#
# Version JRE: 7.0_15 - b33
# Java VM: Java hotspot Server VM (23, 7 - b01 mixed mode linux - x 86)
# Problematic frame:
C# 0X6537F1E0
#
# Core dump is written. The default location: /home/aalopez/development/Oracle/Middleware_12.1.2/Oracle_Home/jdeveloper/jdev/bin/core or core.14655
#
# A file error with more information report is saved as:
# /home/aalopez/development/Oracle/Middleware_12.1.2/Oracle_Home/jdeveloper/jdev/bin/hs_err_pid14655.log
[thread 1764014912 was also a mistake]
#
# If you want to submit a bug report, please visit:
# http://bugreport.Sun.com/bugreport/crash.jsp
#
Home/aalopez/Development/Oracle/Middleware_12.1.2/Oracle_Home/JDeveloper/jdev/bin/... /... /IDE/bin/Launcher.sh: line 603: 14655 Aborted (core dumped) ${JAVA} "${APP_VM_OPTS [@]}" ${APP_ENV_VARS} - classpath ${APP_CLASSPATH} {APP_MAIN_CLASS} ' ${APP_APP_OPTS [@]} ".
---------
Any ideas?
Thank you.
Same problem on ubuntu 13.04. The problem is the jdk 7 provided with JDeveloper 12 c, because JDeveloper works very well with OpenJDK 7. You must change the JDK home in the jdev.conf file. On my ubuntu 13.04 I made the following changes:
"SetJavaHome/home/ss/Oracle/Middleware/Oracle_Home/oracle_common/jdk.
TO
"SetJavaHome/usr/lib/jvm/java-7-openjdk-amd64 /".
-
MacBook Pro starts does not after crash
Hello
first... Sorry for my English ;-)
I have worked on my MacBook Pro (early 2011) and the screen was distorting the market. I did a reset hart (by pressing the power button / stop to stop). After that he starts not more. I erased the MSC, the Cache of the NVRAM. Tried to boot in recovery of the Internet. But I get only a blank white screen and the fan at full power. Beginning not more.
What it could be and what can I do?
Thank you very much!
Your MBP is perhaps in this category:
https://www.Apple.com/support/MacBookPro-videoissues/
Make an appointment with an Apple store genius bar and tested it.
Ciao.
-
EL Capitan starts does not after turning off...
Hello
After updating my MacBookPro mid 2014 at El Capitan 10.11.1 is not restarting after closing.
After the departure, I see the loading bar then he hangs up...
Need to go to recover, then reinstall El Capitan of the Internet to start the computer again.
Help, please!
concerning
Valentine's day
Please remove "SyncMate" by following these instructions. If necessary, start the computer in safe mode to do it.
If you can not start even in safe mode, ask for other instructions.
Back up all data before making any changes.
-
Excel 2007 starts does not after installing KB973593
Office Standard 2007 in Vista running. KB973593 installed last night. When I try to start Excel, instead of start, Windows Installer arrives. After a minute or two, I get the following error:
Problem with shortcut
This patch package could not be opened. Verify that the patch package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer update package.Hello
Check out this forum exclusively intended to provide resolutions to the problems in office:
http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspxGood luck $
-
Application services won't start does not after Oracle Applications 11i Clone
Hi all
Can someone help me on this...
EBS: 11.5.9
Database: 9.2.0.3.0
After cloning oracle Application Apache, concurrent managers and other services are in place and works perfectly but my forms and reports services do not come to the top.
It's show time when I tried to start the services. Please find below
Service control script execution:
/Disk1/Oracle/dev1comn/Admin/scripts/dev1_dataprepdev1/adfrmctl.sh start
script gave:
****************************************************
ERROR: Timed out: Exception interrupted
Command line is maybe not valid
****************************************************
Service control script execution:
/Disk1/Oracle/dev1comn/Admin/scripts/dev1_dataprepdev1/adrepctl.sh start
script gave:
****************************************************
ERROR: Timed out: Exception interrupted
Command line is maybe not valid
****************************************************
Service control script execution:
/Disk1/Oracle/dev1comn/Admin/scripts/dev1_dataprepdev1/adfmcctl.sh start
script gave:
****************************************************
ERROR: Timed out: Exception interrupted
Command line is maybe not valid
****************************************************
Service control script execution:
/Disk1/Oracle/dev1comn/Admin/scripts/dev1_dataprepdev1/adfmsctl.sh start
script gave:
****************************************************
ERROR: Timed out: Exception interrupted
Command line is maybe not valid
****************************************************
Thanks in advance...
SAIAutoConfig succeeded completely without error?
Please see (adstrtal.sh returns timeout error [331322.1 ID]).
Thank you
Hussein
Maybe you are looking for
-
How can I delete all THE pictures from the Iphone 6?
I am trying to remove all the photos from my Iphone 6. I have had no luck with one of the methods I've tried, including the phone for the Mac, excluding photos of synchronization.
-
Clock or 6587 external in (simple nerve - ADM)
HelloI have a PXI fpga 7962R module and or 6587 adapter. I want to use the external clock to set up a simple Adder xilinx Ip core. I have the e/s 0 clock input an external clock of 20 MHz with 3 V pk to pk. I then attached to single loop timed cycle
-
I bought a computer at a garage sale. When I try to start it is password protected. When I try to start it in safe mode, it is also password protected .is there any way I can bypass this password protection? I have not all records for this system. do
-
Vista SP2-Microsoft Update offers several times
Original title: Vista SP2. I tried to install Windows Vista SP2, it shows that II have installed, but it comes back that I need to install it. What can I do to fix this
-
I downloaded creative cloud and everything went great, but when I run it I get an error. Would like to help so I can get back to editing on my new computer, thx!