Server memory configuration

Similar Questions

• Dell PowerEdge R720 stuck on memory configuration

  Hello, maybe someone can help. I have a Dell R720 which had to restart Windows updates, once its been a bit problematic in that it sits on the configuration of the memory for about 20 minutes. Last night it never comes not beyond that.

  I read on a forum that it could be a driver of KVM switch problem?

  I also read that you can press ESC after publication and which will bypass this, problem, the server is a domain controller and nobody is there.

  Someone knows something similar?

  Peter

  Hello

  Is anyway to bypass the memory configuration?

  I reinstalled the processors and processors, but its still a problem.

  Any suggestions please?

  Peter

• R715 not Optimal Memory Configuration

  Hello

  We have a bunch (35 ish) R715s all configured exactly the same. Each with two CPUs of AMD and the factory had modules memory 8 x 2 GB (1Rx8 PC3L-10600E-09-10-D0) inside.

  Recently, I wanted to test the addition of extra ram. So, I bought 8 x 4 GB ram (2Rx4 PC3-10600R-9-10-E1). It is based on manuals Dells and determinative webpage about what would accept this server. When you try to install the ram here are the scenarios and what happens:

  (1) add 8 new modules for the empty slots of 'Black '. The machine does not start just buzzing.

  (2) take the 8 old modules out of the 'White' slots and REPLACE them with 8 new modules. It starts, but says "WARNING: the installed memory configuration is not optimal.  However, the bios reads 32 GB of ram.

  (3) take it down to only 4 modules (new modules). Set as described in 'A1, B1, A2, B2' slot machines. Same message "not optimal" appears and reads the 16 GB of ram.

  I also made sure that I am under the latest firmware available. Can you please explain what I'm doing wrong and my best option for ram I have?

  Linxxs,

  Sorry you are having memory problems with the server. The first question that you see, which once try to mix modules DIMM, is that new modules DIMM was purchased are Rdimms. The original DIMM, you have on the server are UDIMM, which Rdimms and UDIMM cannot be mixed in the same system. That's why you see the post No..

  Now, when you install only the 4 GB Rdimms, the reason for the error "Not optimal" is that with the R715 with dual rank Rdimms, best would be 1333 mhz DIMM, where the rdimms 4 GB you ordered are at 1066 mhz. Now, these bars will work in the server, but is not optimal, where the error.

  Just a note side when examining options, with unique access, you are limited to only 2 GB DIMMS, in order to extend it to allow only allows you to add several DIMMs of 2 GB. With double access, you can run as is, but will be the error, or you can swap in DIMM 1333 mhz modules.

  Just a few things to consider.

  Let me know if it helps.

• C240 M3 blocked "memory configuration and test..."

  Hello

  This server was returned by just us to Cisco, which had lent because it was new.   We try to return to service, but have encountered the following problem.

  At first startup, the server receives as much as 'memory configuration and test..' message.  Just this message, it shows no progress in actually memory test.   After a few seconds it turns off, and then turns upward again, repeat that a few times before sit down you with the "memory configuration and test.." message at the top of the screen, but now also showing the address IP of MMIC inside.   The four led above the power button shows green fixed and switch ID unit than the blue LED power buttons, as they should.

  I can get to the MMIC login screen, but the password to the default password so can't get farther in this direction until we discover the new username/password details.  Unless anyone knows how to reset the default MMIC.

  I tried the following recovery steps...

  (1) if we set the J2065 ' Clear CMOS' jumper, the server doesn't work.  It powers up to the day before, but does not respond when you press the power button.

  (2) to the "recovery" of the J2068 rider don't seem to have any effect, the server does not read the USB key recovery file.

  Any ideas?

  Thank you

  Tony S

  I remove the CMOS battery for a while, put back in place, try again and if still nothing... I would look for a motherboard replacement.

  -Kenny

• Windows Server Memory sharing

  Hello
  
  We are running Oracle 10 g 2 on Ms Windows 2003 x 64. Now according to:
  
  http://download.Oracle.com/docs/HTML/B13831_01/tuning.htm
  
  7 setting Windows to optimize the Oracle database:
  7.4 configure Windows Server is an application server
  
  Please guide how to change Windows Server memory to the model of network applications?
  
  Thank you to

  As it says, see the documentation for the operating system.

  For example http://technet.microsoft.com/en-us/library/cc728171.aspx
  This will take care of you the underlying parameters. There is therefore no need to hack the registry.

  Edited the link.

  Published by: orafad on December 17, 2010 11:19

• PowerEdge R710 E2011 memory configuration error

  I have a question that has me running around in circles.

  I'm the filling of a PE R710 server with 1 GB 1Rx8 PC3 - 10600E DIMMs, which works very well when the first two DIMM slots are filled for each channel. However, when I fill the third slot DIMM in any channel, I get the E2011 Memory Configuration error.

  I've already updated the system board BIOS to version 6.4 and still get this error.

  Can anyone out there tell me how to fix this?

  Thank you!

  Pripley,

  Based on what you say, it seems that the question you are running in is due to the DIMM you are populating the server, that sound as if they are UDIMM. With UDIMM, as well as Quad DIMMS, you are limited to 2 DIMMs per channel. At the bottom of page 129 of the present manual, you see this limitation.

  Let me know if that answers your question about the memory problem, or if you have Rdimms and see this.

• Satellite Pro L500-11V memory configuration

  Looking to buy, but the memory configuration is confusing.

  Care say 2 total slots with 1 free slot but already installed 1024Mo & 2048Mb.

  Card mother 1024Mo is mounted?

  Hello

  According to the Toshiba product page (you can find it using google ;)), the laptop was equipped with 2 bars of memory; a 2 GB and the second 1 GB module.
  If the laptop has 2 modules installed and supports the 3 GB of RAM (2 GB + 1 GB)

  I think that now everything is much clearer ;)

• the 27-inch 5K skylake memory configuration?

  I understand there are 4 memory locations by the end of 2015 iMac 27 inches.

  How is the 8 GB memory configured?

  is it configured 4 x 2 GB? or 2 x 4 GB with 2 empty slots?

  Thank you.

  Two modules of 4 GB.

  (136753)

• The SQL server system configuration checker cannot be executed due to WMI configuration on the computer

  The SQL server system configuration checker cannot be executed due to WMI configuration on the computer

   
  Toshiba-User Error: 2147749896 (0 x 80041008)
   
  I am trying to load the software for insurance. I got the above message.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  
  The SQL Server installation & set program to update Forum

  http://social.msdn.Microsoft.com/forums/en/sqlsetupandupgrade/thread/3f313abe-8826-4d76-8F04-611ebd4d0141

• Move (or copy) files__Error GRAND 0x8007046A: insufficient server memory is available to process this command

  error 0x8007046A: insufficient server memory is available to process this command on BOTH Vista and XP, when you try to move LARGE (> 100 GB) files from drive 1 to external drive connected locally

  Currently trying to use robocopy and changed the

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LanmanServer
  50 to 12 \Parameters

  WHY is happening.  GREAT video becomes more common, this will become a growing problem?

  E-mail address is removed from the privacy *.

  Just got "insufficient system resources to complete the service requested, using robocopy on my xp machine.

  This becomes a very serious problem that I have almost 200 GB tied up on my local disk in two files that I need to get away!

  Help!

  Boblevy,

  I had this problem with the Western Digital external drives in the past. There is an article on this specific error found here:
  http://support.Microsoft.com/?scid=kb;en-us;177078

  It refers to the same registry key that you mentioned above. You mention that you are changing the key; If it helped?

  This may be caused by your antivirus and it may be interesting to try this copy even in Mode safe and then further identify the issue with a clean boot:

  Method 1: Put the computer in safe mode and see if the problem persists:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 2: Clean boot

  If the problem is not repeated in safe mode, there is probably a startup item or service is causing the problem. Follow the steps on the following link to locate the item or service responsible for the error:

  http://support.Microsoft.com/kb/929135

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The network connectivity status appears as only 'Local' error message ' there may be a problem with your domain name server (DNS) configuration "when trying to diagnose the problem.

  Original title: connection internet wireless Sony Vaio problems

  I get connection "local only" and then when I try to diagnose and repair he said: "it may be a problem with your domain name server (DNS) configuration. He said that this problem cannot be fixed automatically and I have no idea what to do.

  How do you connect to the Internet (method/ISP)? What is a stand-alone computer or a corporate work station? What is the status of virus/malware of the machine? Please give us more details so that we can help you.

  Help us help you:

  http://www.elephantboycomputers.com/page2.html#Tech_Support - See the article "how to write a Post.
  http://support.microsoft.com/default.aspx/kb/555375 - how to ask a Question

  Troubleshooting Internet connectivity

  1 answer to the first and second troubleshooting Questions:

  First Question of troubleshooting: If the problem is new, what has changed between the time things worked and the time they do not have?

  The second issue of Windows troubleshooting: what is the status of virus/malware of the machine? If you think it's clean, what programs (and versions) allows you to determine this?

  Make sure that the computer is clean - http://www.elephantboycomputers.com/page2.html#Removing_Malware

  Many variants of malware will allow a proxy server if you are unable to Internet. Go to control panel > Internet Options > connectivity tab > LAN button. If all is selected in the section Server Proxy, uncheck the box, apply/OK outside.

  2. If nothing has changed and that the computer is clean, what antivirus/security programs are you running? Have AVG 8 or Zone Alarm? These two programs have had updates that caused Internet connectivity problems. I don't recommend either of these programs, but if you want to keep check them on the mftrs.' support websites.

  3. If #2 is not applicable:

  a. unplug the router.
  b. disconnect the modem. (If you have a DOCSIS 3 modem with battery backup, press the Reset button to reset the modem so the lights go out).
  c. wait 60 seconds.
  d. plug the modem (or wait until the reboot is completed) and expect that all the lights are on.
  e. plug the router and wait until all lights are on.

  You now have an Internet connection? Otherwise:

  4. connect your computer directly to the cable/DSL modem. You now have an Internet connection? If so, there is a problem with the router. They do not last forever. Replace it.

  If there is no Internet when your computer is connected directly to the cable/DSL modem, call your ISP because something is wrong with the cable/DSL modem or your Internet service.

  MS - MVP - Elephant Boy computers - don't panic!

• PE R710 optimal memory configuration

  Hi, we need to upgrade memory on our R710s. trying to find recommendations for configuring optimal memory for gen 11 servers without losing the memory speed. Came across a doc 2009, saying that we can not go beyond 1 DIMM per channel to 2 RDIMMs x without dropping speed to 1066. I'm sure that, after the updates to the BIOS, than the limit went from 1 to 2 DIMMs per channel. Can anyone confirm or share a most recent doc? Thanks in advance.

  Hello.

  The speed of the memory of each channel depends on the memory configuration. Yes, with the BIOS update as of May 15, 2009; Memory only rank and dual-rank modules supports up to 1333 MHz speed. See General information below.

  • Modules memory single or double-row:
    • One module of memory per channel supports up to 1333 MHz.
    • Two modules of memory per channel supports up to 1066 MHz. (review of BIOS on May 15, 2009, support was added for two modules per channel at 1333 MHz speed.)
    • Three modules of memory through are limited to 800 MHz, regardless of the speed of add-on memory.
  • For modules of memory Quad-rows:
    • One module of memory per channel supports up to 1066 Mhz.
    • Two modules of memory through are limited to 800 MHz, regardless of the speed of add-on memory.

  If the memory modules with different speeds are installed, they won't work at the speed of the modules slower memory.

• County of total memory configured in each cluster

  Hello

  I'm pretty new still, Powershell and PowerCLI, but I'm learning.

  I'm playing with, trying to extract data from my vCenter and its going well so far, with the help of this site and a lot of google'ing

  But now im running into a bit of a problem, I want to count the total amount of memory configured in each cluster. And what I soleved with this code:

  $confimem = get-Cluster |

  Select Name,

  @{N = 'Total configured memory GB'; E = {}

  [Math]: round (($_ |)) Get - VM | %{$_. MemoryMB} |

  Measure-object-sum | (Select sum - ExpandProperty) / 1 Ko, 1).

  }}

  And it gives a good result. But now I'm thinking it's account also all VM in the cluster, which is fed to the wide models and all that. I want to do is to include only the VM that is powered.

  And I was thinking something like: Where-Object {$_.} PowerState - eq 'Receiving'}, but I'm not experienced enough to know how to put this together.

  Any body help me solve this problem? I would be very happy

  Nice day.

  $confimem = get-Cluster | Select Name, @{N = 'Total configured memory GB'; E = {[Math]: round (($_ |))} Get - VM | Where-Object {$_.} PowerState - eq "Receptor"} | %{$_. MemoryMB} | Measure-object-sum | {{(Select-ExpandProperty Sum)/1 Ko, 1)}}

• Memory configured

  Hello

  A virtual machine allows more memory than its configured memory?

  For example:

  ESXi host is to have 10 GB of memory. 2 VM are hosted on this. Dv01 & VM02 configured memory is 2 GB.

  (1) if the Application is running inside the virtual machine requires more memory, then Will VM would be able to use memory configured 2 GB of memory conc as host is to have additional 6 GB of memory?

  Hello

  When you say 'configured memory', I guess you are trying to say that it is the memory that you have assigned as you created the virtual machine.

  In this case, not your virtual machine cannot be used more than it is configured with. you increase the memory.

  Please see below the link and image captured from pubs of vmware.

  http://pubs.VMware.com/vSphere-4-ESX-vCenter/index.jsp?topic=/com.VMware.vSphere.vmadmin.doc_41/vsp_vm_guide/configuring_virtual_machines/c_vm_hardware_options_resources_available_to_vm.html

  Hope that helps.

  

• PowerEdge R815 optimal memory configuration

  Hello world

  I am in courses run PowerEdge R815 with 128 GB of memory (16 GB 8Sticks) I tried all memory configurations I knew and he always gives me ' the memory configuration is not optimal, press F1 to continue "to reboot.

  I tried

  A1, B1 - A5, B5

  C1, D1 - C5, D5

  who should be the best according to the manual also, but it gives even the same question. Can someone tell me please how to configure this option to solve this problem?

  Thank you

  Riazansary,

  A couple of things that I see that would need to be clarified. What about processors, how you have installed? If you indeed have 4 processors installed, then the minimum number of DIMMS that you can use is 16, as it is necessary to have 4 DIMMS per processor. If you use 2 CPUs (1, 2) then the population would be 4 - A1 and B1 - 4. Table 3-2 on page 94 covers this, it shows that the minimum number of DIMM slots for 2 processors is 8 and 16 for 4 processors. - http://ftp.dell.com/Manuals/all-products/esuprt_ser_stor_net/esuprt_poweredge/poweredge-r815_Owner%27s%20Manual_en-us.pdf

  Let me know what you see.