servermgr validation of connection from 0: 100000

Similar Questions

• Client DHCP is unable to get a valid IP address from the DHCP server.

  Client DHCP is unable to get a valid IP address from the DHCP server. I have a home edition of Windows XP attempts to connect to my router wirelessly with wireless or wired connection but I get an error in Event Viewer with the discription DHCP 1007 error message. From what I researched, I discovered that the DHCP service depends on the AFD, TCP/IP and NetBT services. All these services are correctly place and worked very well (even the DHCP service is running without error) but every time I try to release/renew my IP address I receive than DHCP warning in the case where the viewer and I just cannot get a valid IP address of the server (router) I also have one of these verizon wireless G3 usb adapters and it works fine. I also have a good ping back when I try to do a ping localhost (for the closure) I also tried the preinstallation of uninstalled drivers from the adapter/s and nothing works. The only entrees in the registry for DHCP error are also AFD, NetBT and TCP/IP nothing else there, also all the files in the/system32/drivers afd.sys netbt.sys and tcpip.sys in addition to solve the problem, I'll mention that I installed and reinstalled Northon earlier, I do not remember if the problem appears before or after that. I receive also any error or warning in the security log or at least I don't know how to read: P

  Thanks in advance

  Thanks for the information.

  I hope you know that it is risky to connect the laptop to the Internet with no firewall and no antivirus... If this laptop is already connected to the Internet in this State, he is perhaps already infected.

  You said you know the router works because the other computers can connect successfully to it.  You should check the configuration of the router to make sure that it is not configured to limit the number of IP address it supplies, and (b) it is not configured to filter users by MAC address.

  When this laptop is connected by Ethernet, even if he gets the IP address of 169.254.x.y, can you ping the router?  Find the IP address of the router on any computer connected to it by running the ipconfig command in a command prompt window.  The "default gateway" is the IP address of the router.  Run the ping command in the command prompt window as well.

  If the ping is successful, it is possible that you might be able to use an IP address in the correct range for an Ethernet cable (but I doubt that it works for the wireless).

  It is very difficult to cite anything in this forum.  If you click on the link "Reply citing", all of the message to which you are replying is quoted.  You can copy the citation and delete parts of it, but it is not very user friendly.

• Hi someone help please I am signing the apple tv correctly and it says the password for itunes that is incorrect. However, I am now connected from my computer and it is OK

  Hi someone help please I am signing the apple tv correctly and it says the password for itunes that is incorrect. However, I am now connected from my computer and it is OK

  Have you tried to reboot your router, correct your location settings, you use audit stage 2.

• Why is-36 of Firefox on Windows receiving connections from DNS servers? Option network.dns.get - ttl

  Following update Firefox 36, my firewall was flooding asking me to allow external connections from the Internet to my browser. Looking at it more closely, Comodo Firewall indicates that external websites are trying to connect to Firefox, port 53 to an arbitrary port on my machine.

  If I disable the option FF36 new network.dns.get - ttl, it stops. I can't find any documentation or help on this option.

  Why Firefox do this? Is Comodo incorrect when he labels it as an external connection attempt? (It has normally been extremely good to differentiate the incoming and outgoing traffic). I guess that Firefox is trying to determine the TTL for DNS caching, but it is not make sense why DNS servers then try to connect to me.

  I am reluctant to create a firewall rule to that arbitrary Internet connections on my machine are OK as long as their origin on port 53, tips on how to manage all that this new feature is firmly States would be appreciated.

  Thanks in advance for any help.

  Hi grammarye,

  Yes, you're right in thinking that Firefox is trying to find the TTL value. This is new in Firefox 36 behavior and was presented as services frequently changing DNS records (such as Cloudflare) were not working properly for Firefox users.

  Firefox makes asynchronous DNS searches - which means it will make a DNS query and then proceed to perform another task instead of waiting for an answer.

  Your ISP DNS server puts in cache only TTL an area for a short time, so if it does not the current LIFE expectancy, he will interview with other DNS servers to find.

  IANAE, but probably what is happening is:

  1. Firefox tries to find the DNS record for the domain that you want to connect to
  2. Your ISP DNS server does not have the current LIFE expectancy, then connects with other DNS servers to find
  3. During this time, Firefox lingers with something else
  4. DNS server, then reconnects to give you full DNS, including the TTL check
  5. Comodo sees the packets of the DNS server and panic

  I completely agree that arbitrary ports of white list is a bad idea, but in this case, the behavior is completely harmless.

  You can want to whitelist Firefox in your Comodo Firewall, or continue to let network.dns.get - disabled ttl.

  (edited to fix broken links and add a sentence)

• How to customize my mozilla like gmail. (connection from any PC in the browser to get all my saved favorites)

  I NEED TO ACCESS MY BRPWSER ON DESKTOP FROM ANYWHERE IN THE WORLD... LIKE GMAIL...

  How to customize my mozilla like gmail. (connection from any PC in the browser to get all my saved favorites)

  (Personal information removed by the moderator. Please read the Forum rules and guidelines - m)

  Sorry, that Mozilla does not offer a feature like that.

  Check out Xmarks. http://www.Xmarks.com/about/features/overview

• How can I change my internet connection from wireless to wired

  Desktop HP Pavilion HPE h8-1017

  Windows 7 Home Premium 64 bit OS

  How can I change my internet connection from wireless to wired?

  Hello

  You already have a wired connection to your home? Very simple, just using a CAT5e or CAT6 cable and connect to a LAN port of the modem or router to port #2 (at the back) until you and your machine will:

  

  Kind regards.

• How can I connect from a PC to another PC using LabVIEW

  New IAM for LabVIEW and need help. How can I connect from a PC to another PC using LabVIEW. IE how to connect to the IP of the PC, another address using LabVIEW. Thanking you.

  There are a few methods of network communications in LabVIEW.

  Some of them, in no particular order:

  -Network shared Variables

  -Flow network

  -Screw HTTP and Web Services client

  -TCP

  -UDP

  (There are also libraries of pre-written e-mail based on UDP/TCP)

  Which the decision to go for depends on many factors (e.g. should you read the last value of variables, flow without any loss of data, data dissemination or send messages/packets of data, etc.). I suggest take you a look at some examples in the finder of the example (help-> find examples...). If you are really new to LabVIEW, I suggest you take some free LabVIEW tutorials - take a look at the links at the bottom of the first post in this thread.

• Remote Desktop issues connecting from home to work the computer in Windows XP. Remote Desktop stops responding and eventually disconnects.

  Just around the beginning of July (2011) I started to have remote Office questions when connecting from home to work. If I minimize the connection for a while and come back later, it will be often does not. I'll have to hit the close X button several times before, he ends by abruptly disconnects. By the sudden I want to say that I don't get no dialogue usual warning that the session will be disconnected.

  Also, sometimes when I connect I get a white screen instead of a connection window.

  Anyone know if there was a Windows Update, or anything that can cause problems with RDP.

  I used to be able to connect perfectly without any problems.

  Thank you

  original title: Remote Desktop problems for the months spent on XP

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the below link: http://social.technet.microsoft.com/Forums/en-US/itproxpsp/threads

• Error: The period elapsed prior to obtaining a connection from the pool in the Windows XP computer.

  Original title: timeout expired.

  I get this question: timeout expired. The period elapsed prior to obtaining a connection from the pool. This can happen because all pooled connections were used and the maximum pool size has been reached.

  It's my code and the problem is maybe the part highlighted.
  Dr. MySqlDataReader = null;

  Try

  {

                  MySqlParameter [] param = New MySqlParameter [] {}

  New MySqlParameter("?_MaxTries",MaxTries)};

  Dr = MySqlHelper.ExecuteReader (ConnectionString, "call ssp_EscalationMails)
  ? _MaxTries) "(, param);"
  List emailList As new List();
  EMailInfo objEmailInfo;
  While (Dr. Read
  {
  objEmailInfo = new EMailInfo();
  objEmailInfo.ID is Dr.. GetInt64 ("EmailToFire_ID");
  objEmailInfo.To is Dr.. GetString ("To");
  objEmailInfo.From is Dr.. GetString ("From");
  objEmailInfo.Subject is Dr.. GetString ("Subject");
  objEmailInfo.Body is Dr.. GetString ("Body");
  objEmailInfo.CC is Dr.. GetString ("CC"); CC is null in DB
  objEmailInfo.Tries is Dr.. GetInt16 ("Tries");
  objEmailInfo.Sent = 0;
  emailList.Add (objEmailInfo);
  objEmailInfo = null;
  }
  SmtpClient smtpClient = new SmtpClient();
  smtpClient.Host = SmtpHost;
  foreach (objMail in emailList EMailInfo)
  {
  Try
  {
  MailMessage mailMessage = new MailMessage();
  mailMessage.To.Add (objMail.To);
  mailMessage.From = new MailAddress (objMail.From);
  mailMessage.Subject objMail.Subject =;
  mailMessage.Body objMail.Body =;
  mailMessage.IsBodyHtml = true;
  mailMessage.Priority = MailPriority.High;
  objMail.Tries += 1;
  smtpClient.Send (mailMessage);
  objMail.Sent = 1;
  mailMessage = null;
  }
  catch (System.Exception e)
  {
  string message = "shooting unique Email.
  + System.Environment.NewLine + e.get_Message () + ":" + Convert.ToString (e.InnerException) + System.Environment.NewLine + "EmailToFire_ID:"+ ".
  objMail.ID + System.Environment.NewLine +.
  "------------------------------------------------------------" +
  System.Environment.NewLine;
  Logger.LogMessage (message);
  }
  MySqlParameter [] uspparams = new MySqlParameter [] {}
  New MySqlParameter("?_EmailToFire_ID",objMail.ID),
  New MySqlParameter("?_Tries",objMail.Tries),
  New MySqlParameter("?_Sent",objMail.Sent)
  };
  MySqlHelper.ExecuteNonQuery (ConnectionString, "call usp_EscalationMails(?_EmailToFire_ID,)
  ? _Tries? _Sent) "(, uspparams);"
  }
  }
  catch (System.Exception e)
  {
  string message = "FireEmails()."
  + System.Environment.NewLine + e.get_Message () + ":" + Convert.ToString (e.InnerException) + System.Environment.NewLine + "-" +.
  System.Environment.NewLine;
  Logger.LogMessage (message);
  }
  Thank you very much

  Hi Swatikurra,

  The question you posted would be better suited in the MSDN forums. I would recommend posting your query in the MSDN forums:

  http://social.msdn.Microsoft.com/forums/en-us/categories

  Hope the helps of information.

• Client VPN blocks inbound connections from remote desktop?

  I am running Vista x 64. To connect to a VPN Windows via the built-in VPN client works except that it seems that all incoming connections from the local network (including remote desktop) are blocked.

  Is this a known problem or design? It is a problem for us because the computer that is running the VPN client is a virtual machine running in hyper-v, so accessible by users via remote desktop - only connection to the console of the hyper-v Server is not an option.

  Are there alternatives?

  I am running Vista x 64. To connect to a VPN Windows via the built-in VPN client works except that it seems that all incoming connections from the local network (including remote desktop) are blocked.

  Is this a known problem or design? It is a problem for us because the computer that is running the VPN client is a virtual machine running in hyper-v, so accessible by users via remote desktop - only connection to the console of the hyper-v Server is not an option.

  Are there alternatives?

  It sounds like the question to split the tunnel . On the VPN client you can enable/disable split tunneling. See this article for help with that.

  http://TechNet.Microsoft.com/en-us/library/bb878117.aspx

  Note the security ramifications...

  In addition, I can not comment on this issue and a virtual machine, so as always YMMV...
  MS - MVP Windows Desktop Experience, "when everything has failed, read the operating instructions.

• When you try to connect from my vista desktop to my laptop windows 7 through the DRC I get the error "unable to connect to the gateway terminal server."

  problems of the DRC of vista for windows machine 7

  I have 2 computers running on a homegroup. When you try to connect from my vista desktop to my laptop windows 7 through the DRC, I get the error "unable to connect to the gateway terminal server."   Can I remotely from the laptop to the desktop vista end. I the DRC 7 is installed on the desktop and tried to connect using the IP as well as the name of the machine but still no joy.

  can someone shed light on this please?

  Hello

  Temporarily disable the security software on both computers and check if it makes a difference.

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• I want to know how to put my vista as a vpn server, so I can connect from work?

  I have Vista Home Basic! and I want it to be VPN server so this way I can access resources on this subject. After researching I found that a customer who wants to set up a private network virtual assigned must address PUBLIC IP. Please ask me I would thank you for it!

  None of the editions of Windows Welcome in native mode allow remote connections from an external PC.  In addition, your own home network router should protect your LAN House of this type of connection.  If you want to connect to your home PC, you need to set your router firewall to allow incoming connections on a port of your choice (not standard ports for incoming connections) and you will ned to install a program such as VNC to accept the incoming connection.  Alternatively, you can buy a service like GoToMyPC (http://gotomypc.com/) that will secure your home firewall courses.

  Brian Tillman [MVP-Outlook]
  --------------------------------
  https://MVP.support.Microsoft.com/profile/Brian.Tillman
  If a response may help, please vote it as useful. If a response to the problem, please mark it as an answer.

• Sharing internet connection from my laptop Sony VAIO Windows 7

  Hello

  I use a Modem of Dongle USB into my laptop which is a Windows 7 laptop, by which I connect to internet on my laptop. Now, I want to share this internet connection from my laptop with my Nokia Lumia 620. Please tell me details how to set up my phone as a wifi router. While my 620 Lumia cannot detect my laptop wifi signal.

  Actually, to clarify, I want to use my laptop as a WiFi router to connect Internet to my 620 Lumia. That's all. Thank you.

  Please note that I use the Dongle USB Modem for internet connection in my laptop and my laptop has WiFi support
  
  Also, I tried to share internet from my laptop through the technology Intel® My WiFi for my Nokia Lumia 620 but when I tried to connect my phone sent me a message that says: "your phone could not connect to the WiFi network, because there is no response from the network. Please try again later.

  Hi Sajid,

  Thanks for the reply.

  There is no option/feature to share the internet connection between computer and mobile. As Ramesh, said that you will need to install any third-party program or app to perform the task. As I see you have answered in the response of Ramesh with the third-party application names. We recommend not all third-party programs for the task you are trying to run.

  I suggest you to contact the Nokia support for assistance.

  Nokia Support: http://www.nokia.com/in-en/support/product/lumia-620/

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Please do not hesitate to visit our Web site for any help with the Windows operating system.

• How to prevent users from a domain network to connect from another pc

  We have a domain based LAN with 6 users with individual workstations and a server (windows server 2003).
  Is it possible to configure a workstation in such a way that they would make newspaper-on the system using only a user ID?
  Currently all users can connect from any workstation using his ID and password. I want to avoid this.
   
  For example:
  The USER is a user who uses a WS-1 station,
  B the USER is a user who uses WS-2 workstation,
  USER-C is a user using the workstation WS-3
  then currently USER 1, USER 2 and USER-3 can log - on the system from any workstation using a credential.
   
  I want to avoid this.
   
  What I want is, WS-1 workstation can only be connected to the USER-A credentials, the WS-2 workstation can only be connected by the credentials of the USER-B and so on.
   
  Is this possible?

  Hello Chetan,

  You're in the wrong Forum for this type of question which is one most appropriate for the ad server and group policy (with possibly the local policy on the workstations).  I would move this if I could, but we do not have this feature in our magic Toolbox.

  To start, see if the information contained in this TechNet article help: http://social.technet.microsoft.com/Forums/windowsserver/en-US/3639e354-3a41-41b9-bf2e-74abc49e23d6/user-permision-on-workstations.

  If not, then open a new question/thread in this same forum http://social.technet.microsoft.com/Forums/windowsserver/en-US/ and ask your question there.  I am sure that you will get detailed advice covering both sides of the situation (Server and workstation) better than here where there is a tendency to focus only on client computers, not servers, unless that quite simple (and being an MCSE, I know that's not really simple - but it also isn't really very difficult if you understand the basics - and even then they should be able to help) to find articles or provide instructions to pass you this part).  I have no doubt that they can also bring about changes, you need to establish which are specific to the workstation (and maybe even have a model of batch file to semi-automate the process - but now I'm guessing / hoping).

  In any case it is really where you should start and return only if explain you what it is about the customers that they cannot handle and need us to help you (because I can't imagine that happening).

  Good luck!

  Kosh

• How to end a vpn connection from site to site on ASA 5510

  Hi guys,.

  I would like to know if there is a command that I can use to break a connection from site to site and restart it whenever I want.

  I don't want to use the close command since I use the specific interface as an exit point on the internet.

  In this case, you can configure just one incomplete crypto map entry, for example: just keep 'peers set' not configured until you establish the vpn tunnel, and then add the command "set by the peers.

  If you disable the tunnel, just remove the 'set by the peers' command for this particular VPN tunnel.