Service .exe wants to run/install msi824.tmp, is this safe?

Similar Questions

• services.exe memory consumption and therefore 15 minutes to start

  services.exe memory consumption and therefore 15 minutes for bootProblem Description: it seems that since the installation of updated KB973687 my Dell Inspiron 640 m takes an age to start. I am running XP SP3 with all updates installed, have 2 x 512 MB memory installed and the basics of microsoft security is enabled and no virus detected. Run the task on the Startup Manager, I see that services.exe 2 user running objects. Maximum memory use reaches about 500 000 to 600 000 k and the size of the virtual memory increases to more than 2,000, 000 k. Once the VM reached approximately 2 200 000 k it starts to release very slowly and finally reduced to a size of about 6 000 - 7, 000 k, then just a race of user object. It is not until that time where the system becomes usable. What is happening at each startup and lasts about 15 minutes for the system be usable. I have read many articles on this issue, and the other that a clean reinstall which I do not, cannot find a solution. Your help would be greatly appreciated. Operating system: Windows XP

  Your list is very different and much longer than mine. My first thought is that you have the programs loading at startup that might as well load up on request. A useful tool for watching the startup items is Autoruns.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  Google search result - report

  http://www.Google.co.UK/search?SourceID=IE7&q=Rarrort+service&RLS=com.Microsoft: en - gb:IE - SearchBox & ie = UTF-8 & oe = UTF-8 & rlz = 1I7ACAW_enGB397GB397 & redir_esc = & ei = mgTwTLvpE4GxhAeUtZSUDA

  Right-click on the report, and then select the graphic Performance. What is the CPU usage and the private bytes. I suspect that you need to know the use during StarUp but for now know how to do this.

  I'm intrigued by the absence of references to other security software. What antivirus, antispyware and firewall do you use?

  Hope this helps, Gerry Cornell

• I am running windows vista without service pack, 32-bit. I can't install the update. I got the error code WindowsUpdate_8007371C. I want to finally install sp1 but I got the same error.

  I am running windows vista without service pack, 32-bit. I can't install the update. I got the error code WindowsUpdate_8007371C. I want to finally install sp1 but I got the same error.

  popihavaki,

  See this response archived from a previous thread:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/aeb7abd4-73c6-403b-9c43-bce64193a1af/>

  05/05 / 1101:03: 23 am

• Software installed but when I wanted to run it know my version of obsolete components DLLS are not compatible with this version of windows

  Software installed but when I wanted to run it know my version of obsolete components DLLS are not compatible with this version of windows

  I installed programs:

  Software individual professor teaches Super Set

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on setup.exe O run as admin.

  See you soon.

  Mick Murphy - Microsoft partner

• IM using XP and it keeps running a shutdown of the system initiated by authority NT\SYSTEM w/status code 1073741482 & system process ' C:WINDOWS\system32\services.exe. How can I stop the closure?

  I get the following message: closing system, the system stops. Please save all work in progress and log off. All wukk unsaved changes are lost. This shutdown was initiated by authority NT\SYSTEM. The system process ' C: Windows\system 32\services.exe ended unexpectedly with status 1073741482 code. The system will now stop diwn and restart.

  I tried the boot, and all the days that something did not work if today I'm the switch back to the normal startup. I tried to run a scan, but it does not have the "clean boot" State... it would also not automatic updates... so here Let's go!

  I had the same problem, tried the clean boot, like Wells, and it has not fixed the problem.  Please try this:
  There are several steps to follow.
  The first is a suggestion from one of the blogs with a slight variation.

  First step:
  Enter safe mode.  (Put in the computer market, press F8 several times until the window offering the Safe Mode option appears.  Use your top and arrows to select Safe mode, and then click it.)

  Since the Office Safe Mode:
  1. right click on 'My Computer' and select 'Properties': my computer-> properties. This opens the "System Properties" dialog box

  2. Select the "Advanced" tab

  3. under "Startup and recovery", click on the button "settings".

  4. at the bottom, in the section "System failure", see what boxes are checked. Windows XP checks them all by default.

  5. click on "Automactically restart." This is probably your cause if you get automactic closures. As an alternative to optimise this method, you can, at your own discretion, also do the following:

  i. uncheck "write an event to the system log.
  II. check 'Send an administrative alert' (which should do more to view the sudden error rather than stop).
  III. uncheck "Automactically restart."
  IV. in the combo box of the section 'Write debugging information', choose '(none) '. Note that this will disable the rest under "information write Debuggin".

  6. your finished, then click 'Ok' to close the dialog of void and then 'Ok' again in the "System Properties" dialog box

  That should do it. Some upgrade suggestions are the best propally but I think these security only handle issues related to other areas if they worth downloads of 2 to 5 hours of 56 k modem for added security. However, I find that some updates are not even for my type of installation (due to unused configuration detection?) or I do not use the services.

  For more information on Tweaking, I suggest to look at "http://www.tweakxp.com" If you are a user of Windows XP.

  Good luck.

  Step 2:
  Also in safe mode.

  Some of these steps have been found on the microsoft Web site.  However, the following text is a little different and should translate into success.  It did for me.
  1) enter the Configuration of the utility system.  You can do this by done safe mode right click on Start, by choosing Search, then typing in msconfig and searching the c: drive.  Once the search is complete, click on one of the icons of msconfig.  This will bring up The System Configuration utility.
  (2) click on the tab general select Selective startup.
  (3) click to uncheck the Process SYSTEM. INI file.
  (4) click to uncheck the process to WIN. INI file.
  (5) click to disable Load Startup items.  Make sure that The Load System Services and use Original of INITIALIZATION. INI are checked.
  6) click on the Services tab.
  (7) click to select the hide all Microsoft Services check box.
  8) click disable all, and then click OK.
  (9) computer.

  Step 3: log in to Windows.

  (1) when you receive the following message is displayed, click Select, check box don't show this message or launch the system to Windows Startup Configuration utility , and then click ok.

  If this solves the problem, go to step 4.  If it is not the case, then you will need support from a professional.

  Step 4: find the culprit.

  1) enter in the System Configuration utility (SCU for future reference.)
  2) click on the Startup tab.  (NOTE: If you find "audm" within the list of starting points, it is most likely the culprit.) It was for me. If it is, go to If not, go to 3).
  (3) the top of the list in the start menu, check AN item, then restart the computer. Make a note of each element that starts without failure.
  Repeat this step until you get the window to "Shut down NT Authority... ».  This will reveal that the start point is the origin of the problem.  Once found, go to 4).
  (4) get in safe mode / SCU / Startup / untick the culprit.
  (5) restart Windows.  If this solves the problem, you are almost finished.  If this isn't the case, you will need the services of a professional.

  Step 5: remove the culprit and the reactivation of the process.
  1) go to Start / Search / and look for the item that caused the problem.  (When I did a search for audm - 2 released files.)
  (2) delete all files with the name of the offender and empty your trash.
  3) enter the Configuration of the system - (start/run/msconfig).
  (4) on the general tab, re-enable the Process SYSTEM.ini, WIN.ini processand Load Startup items.
  (5) restart the computer.   The problem should be solved.
   
  Basic suggestions:
  (1) ALWAYS keep a firewall- and choose the option "Open at Startup.  (That's how I think that was my problem - by not having is not the Firewall opens at the beginning).
  (2) perform a virus Scan is every DAY.
  (3) keep all windows programs and drivers updated - every DAY.
  (4) keep all antivirus programs and firewalls updated - every DAY.

  Good luck

  Non-XP-Prof.

• Visual studio runs (.exe) file can run in the other computer where did not install visual studio?

  Visual studio runs (.exe) file can run in the other computer where did not install visual studio?

  I use a visual studio 2012 to make a program file,
  This is a file to execute, which is my generated program file.

  I can throw in another computer in which another computer has not installed any visual studio?

  Thank you

  Hi Chi,

  The question you posted would be better suited in the MSDN Forums since we have dedicated to this support; We recommend that you post your question in the MSDN Forums to get help:

  http://social.msdn.Microsoft.com/forums/en-us/category/VisualStudio, vslanguages, vstfs, netdevelopment, vsarch

  Keep us updated on the status of the issue.

• want to re - install games in my xp sp1 disc accessories, but miss me my auupdate.exe

  want to re - install games in my xp sp1 disc accessories, but miss me my auupdate.exe

  Hi TerryRandall,

  You can see the article for more information about the installation and uninstallation of the games.

  How do I add or remove games in Windows XP

  http://support.Microsoft.com/kb/307768

  I hope this helps.

• Computer asks me if I want to run Microsoft Windows remove tool from malware at c:\windows\system32\mrt.exe/R/RE

  Original title: rmt.exe file

  Windows always autometic update my computer when I turn on my computer. Today, something new happened to me. When I started my computer, the system asked me if I want to run 'Software removal tool Microsoft windows maliciay' to 'c:\windows\system32\mrt.exe/R/RE '. I did not know if run because I'm not sure whether Microsoft or not. I checked this directory on my computer, and I have this file mrt.exe 54353kb with the current date. also a mrt.ini file.

  It is a microsoft file that I can run safely, or it is a virus file that could damage my computer?  Help, please. Thank you!

  Hello

  Microsoft has released a removal tool from Microsoft Windows to help remove software malicious common specific malware on computers that are running Windows 7, Windows Vista, Windows Server 2003, Windows Server 2008, or Windows XP.

  You can see the article for more information about Microsoft Windows Malicious Software Removal Tool.

  The Microsoft Windows malicious software removal tool helps remove specific malicious software and present on computers that are running Windows 7, Windows Vista, Windows Server 2003, Windows Server 2008, or Windows XP

  http://support.Microsoft.com/kb/890830

• I want to run or install my HP Laserjet P1006 printer to work on my system without the software freely, I have misplaced the software please I need your help.

  Hello Sir,

  I want to run or install my HP Laserjet P1006 printer to work on my system without the software freely, I have misplaced the software please I need your help.

  Thank you

  Alex

  You can download the software here:

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3435683&lang=en&cc=us&prodTypeId=18972&prodSeriesId=3435682&TaskID=135

• All .exe files go to the Download Manager and ask if you want to run or save

  Suddenly my pc win 7 cannot run .exe files.  When it starts, I get several windows asking me if I want to run or save each of the boot files.  When I click on an icon for an application, I get the same thing.  If I click on for example a Word document file, Word opens very well, but I can't not all .exe files to run directly.  Even if I go to the Task Manager and click on "new task" and try and invoke Notepad - for example "do you want to run or save.  Even if I go to the control panel and ask search and solve problems - "do you want to run or save rundll32.exe"... Ditto for chkdsk and even for antivirus scanners or malicious software.  All the solutions I can find here seem to imply somehow running a .exe program to diagnose / fix and that's exactly what I can't do.  If you click on "run" in the download dialog there is an attempt to open a window, and then you're right to "do you want to run or save" the same .exe program.  Programs that save files still work all their saved files, it seems a simpler problem rather than a massive corruption.  Yet Labour Office associations, such as the 'open with' for example image files.  Any ideas before you give up and reinstall Windows?  Thank you very much!

  Any ideas before you give up and reinstall Windows?

  -> A a more effective and less painful method would go like this:

  1. keep tapping F8 during the first phase of startup.
  2. select Repair from the menu.
  3. Select an administrator account, and then enter its password.
  4. When you are prompted, select System Restore.
  5. set Windows to a point before this problem occurred.

• I want to install a program, but when I run the setup I have this error displays "an error (-5006: 0x8000ffff) occurred while runnig the Setup program."

  original title: Setup error.

  I want to install a program, but when I run the setup I have this error displays "an error (-5006: 0x8000ffff) occurred while runnig the Setup program."

  Please make sure you have finished any previous Setup and closed other applications. If the error persists, please contact your dealer.

  I solve the problem... All the error is the file. I don't know but he corrupted and I deleted it.

  I have download it again and the problem was solved. Thanks to you all.

• I wanted to install the trial version of indesign creative cloud cc. and sucsessfull. but when I want to run the program it just a massage of error: Error 11. I tried many things on aldready support center, but there is no s

  I wanted to install the trial version of indesign creative cloud cc. and sucsessfull. but when I want to run the program it just a massage of error: Error 11. I tried a lot about aldready support center, but there is no solution. Can you help me?

  Hi Ninat43034799,

  Please uninstall InDesign CC to your machine using the cleaning tool: use of the Adobe Creative Cloud cleaning tool to solve installation problems

  After that, reinstall the product of your creative cloud desktop application.

  Let us know if this was helpful, waiting for your response.

• receive a new Imac there first 6.0 installed. I want to run cc... I now have a license for 2 seats of cc

  receive a new Imac there first 6.0 installed. I want to run cc... I have a license for 2 seats of cc now... do not use two question: how installing cc on this new Imac so I can start using it without coming into conflict with the 6.0 currently installed?

  There is no stage, you need to take in order to avoid a conflict.

  Simply install your cc on imac desktop app you and then use it to install your programs cc, Download Adobe Creative Cloud apps | CC free trial Adobe

• I just bought a new IMac and want to run my old version of Dreamweaver CC3 on that, but I'm getting this quickly, "to open Dreamweaver, you must install the runtime Java SE6 strives".  How can I do this?

  I just bought a new IMac and want to run my old version of Dreamweaver CC3 on that, but I'm getting this quickly, "to open Dreamweaver, you must install the runtime Java SE6 strives".  How can I do this?

  Download it here: Java for OS X 2015-001

• service.exe updating OR deleting of the registry

  Hello everyone

  During my installation of LabVIEW PERIOD 2011 and Vision Run - Time 2011 SP1, I checked the box for "ask the installer for...» "(See attachment). Now I don't want to get updates and so i unchecked the search for regular update in the Update Service of NOR. (See attachment)

  But still when I restart my computer it comes a servce update OR confirmation message connect to internet and I see that "NIUpdateService.exe * 32" process runs in my process list.

  Is there a way to remove this service update from the register or something? Can someone help me with how to do it?

  System: Windows 7 Professional

  Installed software of NOR: LVRTE2011std.exe & Vision Run - Time 2011 SP1

  Thanks for any help

  I managed to find a solution.

  Conrol Panel > administrative tools > Task Scheduler >
  There you can see the name of the scheduled task and the State. Update Service OR was still in Active state it. Now I have I turned off and up to nw he doesn't no pop-up for OR update service whenever I restart the computer.

  But I still don't understand why the update service is running, even if i disabled the regular update in the Update Service OR